SAP BO XI 3.1 SP3 - cluster with 2 nodes - reports pending

Hello there,
we have built a cluster environment consisting of 2 nodes. These 2 nodes share a database and a file store. After the migration of about 2000 Crystal Reports by using the import assistant the reports do not run (status "pending").
When restarting the machines some of the sheduled reports run once (directly after restart). If we try to start a report manually it isn`t working.
Did anybody have some similliar issues?
Thanks in advance for any tipps!
Alex
Note: Same Reports already run successfully on another single node (diffrent server).

Hi Alexander,
I've seen this behaviour before when the CMS does not register the Crystal Job servers available correctly. If a job is scheduled in the "incorrect" CMS, the status is Pending because there are no Job servers available.
Usually, the solution is to make sure the binding order in your network is correct so both servers can communicate. Other option is to select the IP where your servers listen to in your CMC > Servers page. Check if you see any communication failure on your event viewer.
Regards,
Julian

Similar Messages

SAP B1 8.8 PL 13 Authorisation with Crystal Report

Hi Experts,
I have implemented SAP B1 8.8 PL 13,
Problem is that, I am not able to control authorizations of crystal reports.
Practical case:- We have one crystal report called 'VAT Return Report', where are i trying to change authorization of this Crystal report, when i give authorization to this report, system shows 'Operation completed successfully', after this if i close authorization window, and again open authorization window, that authorization for 'VAT Return Report' do not retain, i.e system do not show authorization which i was given.
Please any one can suggest me how can i solve this problem.

Hi Sathish,
I have checked this in PL18 have had no issue being a super user and not a super user its working fine, in crystal designer have you been able to execute the report.
try this
1. Is your printer setup to the correct one you normally use. - In my case it had been default
2 In Report layout manager (RLM) --> Select the VAT ... report and verify if the status is Active.
3. Are you able to execute the report from RLM -> Run Report
Is your report is still not working in SBO Re-import it..
Regards,
Rakesh N

How can I connect with SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition

Hello together,
I downloaded and installed the SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition on a virtual client.
I toke a long period to finish the installation.
Now some questions to use this system in the right way:
1.) How can I get a "developer license" which do not expire? Because the link http://www.sap.com/minisap seems to be not ok.
2.) How can I connect via network with the sap system? the application server is running on a vm client with a static ip i.e. 192.168.1.5. And my laptop gets a ip in the same range. I have installed the gui on my laptop and tried to connect with the system. But it does not work! I used as application server the ip of the virtual machine. I use the gui witch is installed on the same host like the application it works (with localhost as application server adress)
3.) Where can I download the newest version of the SAP Gui? I do not have a service marktplace account? Is it possible?
4.) I read in the documentation that it should be possible to reach the sap system also with web dynpro: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
But it does not work. I got an error message: Service cannot be reached
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
Regards
Christian

I fixed in the meantime the second problem. It was a problem with my local firewall. But the other three points are still open.
Thank in advance for your help

[SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.

Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.

Oracle RAC + Clusterware and another Cluster with Clusterware for SAP

Hi,
I have some questions about implementation of Oracle RAC and Clusterware with SAP
For exemple, an architecture with 4 servers ( 2 real and 2 vritual ).
I would like to know if i can do this
2 servers for the first cluster.
First cluster is with Clusterware and Oracle RAC
This is for all the SAP Oracle databases environment
I think there is no problem here.
Now, with 2 others servers il would like to make another cluster (with also clusterware ) for SAP Central services (SCS) and enque replication server (ERS)
Because all architecture is for only one SAP environment with separate services.
1 for Database (cluster 1)
1 for Central services ( cluster 2, virtual machine )
1 for Dialogue Instance (no cluster)
To be clear, the second cluster is to make HA of central services SAP (SCS and ERS )
My question 2 are :
Is it a good job to do this ? or there is anything wrong ?
Do i have to install antoher clusterware for this 2 servers or i have to make anything with the existing clusterware + oracle RAC ??
Thank you very much for you help
Edited by: user12395221 on 29 déc. 2009 15:36

Hi Givre,
have you checked: Providing High Availability for SAP Resources (http://www.oracle.com/technology/products/database/clusterware/pdf/sap-availability-on-rac-twp.pdf) available on otn.oracle.com/clusterware? Not being an SAP expert myself, I still think, this paper describes the configuration - at least partially - that you are trying to set up.
Just an idea. Thanks,
Markus

SAP Business Obeject XI 3.1 SP3 CLuster

Hi All,
In our landscape we want to install SAP BOBJ XI 3.1 (SP3) systems on cluster. We have 2 window 2008 server were we installed BOBJ XI3.1 (Tomcat55), Crystal 2008 and SAP integration KIT XI 3.1(SP3). Prior to start BOBJ installation we created CMS and Audit database on Database (MSSQL) server .
During installation on both server BOBJ XI3.1 (Tomcat55), we choose use existing database. After BOBJ installation we installated Crystal 2008 and SAP integration KIT XI 3.1(SP3) on both 2 application server.
Our network team told us that both application server are in network load balance and gave us one common DNS link.
While during testing when we stop Tomcat + SAI on one sever then we are not able to access CMC or infoview.
Now my question is we dont need to install on both node or any other option we need to choose during bobj installation on 2nd node.
Please assist
Thanks
Deepak R Patil

Hi Julian Jimenez,
Thanks a lot for your quick response.
Yes when i directly try to access CMC and Info view from 2nd node then we were able to access.
I also assume that in our network load balance we missed some configuration.
Did you check the status from the Central Configuration Manager? Were you able to log in there?
Could please let me know the steps to check then i can update on you.
Thanks
Deepak

Problem in Installation of SAP Netweaver CE 7.1 SP3

Hi,
I am trying to install SAP Netweaver CE 7.1 SP3 on Windows XP Professional. All the steps are executed sucessfully till Step 26 where it gives an error when it tries to
"Creating SAP start service of instance CE1 SCS01"
It says that the "Service didn't come up in 40 seconds" and if you retry the installation is terminated in 1 min with the error :
Selfextractor error
iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.2620.1195815840
In the SAP MMC only one server can be seen with the processes;
msg_server.exe
enserver.exe
gwrd.exe
All these processes are running in green.
Please reply ASAP.
The last part of the sapinstdev_log is :
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1
\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
 CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
 CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
 CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
 lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
 CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
 CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from gui

Hi All,
I faced the same problem on WinXP Pro SP2, SP3 and on Win2k3Server although all the installation requirements are fulfilled. I have the same problem with SP5 downloaded from SDN which was released recently.
I could install successfully SP1(Trial Version) from a DVD that came with the book "Developer's Guide to SAP NetWeaver Composite Environment". This was packaged using "Install Anywhere".
So, I think it is a problem with SAPInst. Could anyone help to solve this problem?
Your suggestion is highly appreciated.
Thanks & Regards - Tarini P Mohanty

Why we need ABAP if we can connect With Crystal Reports to SAP R/3

Hi,
I am new to Crystal reports.I came to know that we can connect SAP R/3 by using SAP InfoSet,SAP Table Cluster and Function connectivity in Crystal Reports.So we can generate reports for SAP R/3 database with out need of ABAP.So why we need to go ABAP module.Is there any disadvantages if we dont use ABAP to generate reports or we can use always Crystal Reports to generate Reports for R/3 database?

Hi,
it is correct that you can built a Crystal Report without the need to use ABAP, but we have lots of customers that have invested over the years into ABAP Routines and Crystal REports is able to leverage those as well. So with Crystal Reports you have the choice to leverage existing ABAP Functions as a source for reporting - which might help to leverage complex processing on the backend - or to use InfoSets and tables.
regards
Ingo

Problem while installing SAP Netweaver CE 7.1 SP3!

Hi,
I am installing SAP Netweaver CE 7.1 SP3 on Windows XP Pro. The installation
proceeds normally till Step 26 but at Step 26 while creating and startiong
SAPStartSrv an error is thrown that the Service can not be started in 40 seconds.
If I retry the installation it is terminated with some errors.
The service sapstartsrv can be seen in the task manager up and running.
Please reply ASAP.
I am providing here the error logs:
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01)._getProfile(START) done
TRACE 2007-11-23 16:56:02.161
NWProfiles(CE1.SCS01).getStartProfile() done
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfilePath(true)
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName()
TRACE 2007-11-23 16:56:02.161
NWInstance.getStartProfileName() done: CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile()
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile(false)
TRACE 2007-11-23 16:56:02.161
NW.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.161
NWInstance.getDirProfile() done: C:/usr/sap/CE1/SYS/profile
TRACE 2007-11-23 16:56:02.176
NWInstance.getStartProfilePath() done: C:/usr/sap/CE1/SYS/profile/CE1_SCS01_AGRD50051628A
TRACE 2007-11-23 16:56:02.176
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.176
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:02.207
NW.isUnicode(true)
TRACE 2007-11-23 16:56:02.207
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:02.207
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:02.207
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:02.254
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:02.317
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
TRACE 2007-11-23 16:56:02.317
NWInstanceInstall.createServiceWindows(): going to run <C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin> with input <-r -q -p C:\usr\sap\CE1\SYS\profile\CE1_SCS01_AGRD50051628A -s CE1 -n 01 -U "NT Authority\LocalService" -P "XXXXXX" -e SAP_ALL\I047488>
TRACE 2007-11-23 16:56:02.317
lognode: undefined, append: false
INFO 2007-11-23 16:56:02.348 [synxcpath.cpp:815]
 CSyPath::createFile() lib=syslib module=syslib
Creating file C:\ProgramFiles\sapinst_instdir\CE71_DEV_ADA\INSTALL\sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:264]
CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Going to call CreateProcess/CreateProcessAsUser for 'C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe' now.
TRACE 2007-11-23 16:56:02.348 [synxcchapp.cpp:560]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
Trying to start C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe using CreateProcess(NULL, <command line for executable C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe, NULL, NULL, TRUE, 0x420, NULL, NULL, &StartupInfo, &ProcessInfo)
TRACE 2007-11-23 16:56:02.535 [synxcchapp.cpp:638]
 CSyChildApplicationImpl::doStart() lib=syslib module=syslib
A child process has been started. Pid = 2480. Executable name: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe
INFO 2007-11-23 16:56:02.535
 CJSlibModule::writeInfo_impl()
Output of C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
TRACE 2007-11-23 16:56:45.170 [synxcpipe.cpp:195]
 CSyStdOutErrPipe::onUnderflow(void * buf, int maxBytes, int timeout)
 lib=syslib module=syslib
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2007-11-23 16:56:45.170
 CJSlibModule::writeWarning_impl()
Execution of the command "C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe -stdin" finished with return code -1. Output:
Service not started within 40 seconds.
TRACE 2007-11-23 16:56:45.170
NWInstance.getSAPLocExeDir()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles()
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles(): profiles object exists
TRACE 2007-11-23 16:56:45.170
NWInstance.getProfiles() done
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getProfile()
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01)._getProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.170
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.170
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.186
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.186
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.186
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.186
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.201
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE)
TRACE 2007-11-23 16:56:45.217
NWProfiles(CE1.SCS01).getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.217
NW.getPersistentDefaultProfile()
TRACE 2007-11-23 16:56:45.232
NW.isUnicode(true)
TRACE 2007-11-23 16:56:45.232
NW.isUnicode() done: true
TRACE 2007-11-23 16:56:45.232
NW.getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01).getPersistentDefaultProfile() done
TRACE 2007-11-23 16:56:45.232
NWProfiles(CE1.SCS01)._getPersistentProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode()
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode(SCS)
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWInstance.isAlwaysUnicode() done: true
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01)._getProfile(INSTANCE) done
TRACE 2007-11-23 16:56:45.264
NWProfiles(CE1.SCS01).getProfile() done
TRACE 2007-11-23 16:56:45.326
NWInstance.getSAPLocExeDir() done: C:/usr/sap/CE1/SYS/exe/uc/NTI386
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2007-11-23 16:56:45.326
Function setMessageIdOfExceptionMessage: osmod.applicationReturn
WARNING[E] 2007-11-23 16:56:45.326
 CJSlibModule::writeError_impl()
MOS-01011 'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
TRACE 2007-11-23 16:56:45.326 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-11-23 16:56:45.357 [sixxcstepexecute.cpp:891]
FCO-00011 The step createService with step key |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:761]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL. </body></html>
TRACE 2007-11-23 16:56:45.373 [iaxxgenimp.cpp:1257]
 CGuiEngineImp::acceptAnswerForBlockingRequest
waiting for an answer from gui
INFO 2007-11-23 17:15:43.180 [sixxcstepexecute.cpp:936]
An error occured and the user decided to retry the current step: "|CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService".
INFO 2007-11-23 17:15:43.196 [synxccuren.cpp:1016]
 CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL)
 lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.
TRACE 2007-11-23 17:15:43.227 [syxxcfile.cpp:130]
 CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & , ISyNode::CopyMoveMode_t 0x3, PSyNode &) const
 lib=syslib module=syslib
Target node does not exists and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2007-11-23 17:15:43.243 [syxxcnode.cpp:441]
 CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml, ISyNode::CopyMoveMode_t 0x3)
 lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.xml to C:/Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL/stepLogMessages.1.xml
TRACE 2007-11-23 17:15:43.243 [sixxcstepexecute.cpp:795]
Execution of preprocess block of |CE_DevSystem_App|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|createService returns TRUE.
TRACE 2007-11-23 17:15:43.258
Instantiating new NWUsageTypeBasic
TRACE 2007-11-23 17:15:43.258
NWUsageTypeBasic() done
TRACE 2007-11-23 17:15:43.258
Call block:NW_Instance_ind_ind_ind_ind
 function:NW_Instance_ind_ind_ind_ind_SubComponentContainer_createService
is validator: false
TRACE 2007-11-23 17:15:43.274
NWInstance.byNumber(01, AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall.find(
function (instance) {
 return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value()
TRACE 2007-11-23 17:15:43.274
NWOption(collected).value() done: true
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWJavaInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance()
TRACE 2007-11-23 17:15:43.274
NWJavaInstance()
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A)
TRACE 2007-11-23 17:15:43.274
NWInstance(CE1/J00/AGRD50051628A) done
TRACE 2007-11-23 17:15:43.274
NWJavaInstance() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstance() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWDialogInstanceInstall() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow() done
TRACE 2007-11-23 17:15:43.274
NWInstanceInstall._fromRow()
TRACE 2007-11-23 17:15:43.274
NWSCSInstanceInstall()
TRACE 2007-11-23 17:15:43.274
NWSCSInstance()

Hi Michael,
I have tried that, but the result remains the same.
Manish

Simple Data Type in CAF of SAP NetWeaver DevStudio 7.1 SP3

Hallo
Anybody knows about the use of Enumeration for simple Data Type in CAF of SAP NetWeaver DevStudio 7.1 SP3?
I've defined an attribute "status" for the Entity "Project" with the following values
0: NEW;
1: ACTIVE;
-1: INACTIVE.
As you see the data type is short.
In the program I want to use the following code:
Project myProject = new Project();
myProject.setStatus(Status.NEW)
But I found it out, it is inpossible to to use Status.NEW.
On the other side I read the article of https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/085098ea-0c01-0010-12a8-80ac838bec85. This article is again not updated with the version 7.1 SP 3.
I cannot understand about the whole changes. In the previous release we can define a DDIC type and use it as Simple Data type and in the new Release we just use the XSD-Facet to define an enumeration, but the problem is: we can not reference it in the program. I don't see any advantage. And I tried to find out how I can define the attibute using DDIC type. I didn't get it.
Thanks for any Hints!
Kind Regards!
Ping

Hi Oliver,
Thanks for the reply!
I have login into the system, using User Id and Password.
I have tried unsinstalling everything but the result remains the same.
Previously only one service SAPCE_01 was showing up in the services explorer. But when I tried the
Instance 00:
sc create SAPRKT_00 binPath= "C:\usr\sap\RKT\SYS\exe\uc\NTI386\sapstartsrv.exe pf=C:/usr/sap/RKT/SYS/profile/CE1_SCS00_xxxxx" start= auto obj= "NT AUTHORITY\LocalService" password= abcd1234
Instance 01:
another service SAPCE1_00 was created. But when I tried to retry the instlattio, the installation again stopped at the point while starting the service and when I tried to retry it terminted with the following error.
Please guide.
sapinst.exe - Application Error
The instruction at "0x00cbf040" referenced memory at "0x0072006d". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program
Selfextractor error
iaextract.c:888: child has signaled an exec error. Keeping directory C:/DOCUME1/I047488/LOCALS1/Temp/sapinst_exe.1448.1196681060
OK
Manish

SAP Netweaver CE 7.1 SP3 & SR5 difference

Dear experts,
currently, we would like to install a SAP Netweaver CE 7.1 but according to this link :
SAP NetWeaver Composition Environment 7.1 [original link is broken]
what is the fundamental difference between SAP Netweaver CE 7.1 SP3 and SAP Netweaver CE 7.1 SR5?
Best regards,
Pascal.

Hi Pascal,
SAP Netweaver CE 7.1 SP3 - means CE 7.1 with Support stack level 3.
and SAP Netweaver CE 7.1 SR5 - means CE 7.1 service release 5.
SR5 is more recent. That's the only difference.
Regards,
Shitij

Persistent Store Problems for MYSQL Enhanced Cluster With OpenMQ 4.4

I am trying to implement an enhanced cluster with failover. I have edited the config files for each broker instance for a persistent store. I have appended the following to each of the config.properties files:
imq.brokerid=myclusterinstanceINSTANCE1 # I substitute INSTANCE2 for INSTANCE1 for broker #2
imq.persist.store=jdbc
imq.persist.jdbc.dbVendor=mysql
imq.persist.jdbc.mysql.property.url=jdbc:mysql://xxx.xxx.xxx.xx:3306/test
imq.persist.jdbc.mysql.user=user1
imq.persist.jdbc.mysql.needpassword=true
imq.persist.jdbc.mysql.password=mypass
imq.cluster.ha=true
imq.cluster.clusterid=mycluster
imq.cluster.brokerlist=xxx.xxx.xxx.x:37676,yyy.yyy.yyy.y:37676
I then create the persistence storage with "imqdbmgr create tbl". When I view the data in the tables it creates, I have one row. Under Store_Version, I have 410. Under LOCK_ID, it has NULL. When I go to start the brokers with imqbrokerd, I get the following error:
ERROR [B3198]: Error initializing cluster manager:
com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4239]: Failed to load persistent store version from database table MQVER41Cmycluster
at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:310)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.DBTool.updateStoreVersion410IfNecessary(DBTool.java:350)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.checkStore(JDBCStore.java:3599)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.<init>(JDBCStore.java:127)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at com.sun.messaging.jmq.jmsserver.persist.StoreManager.getStore(StoreManager.java:157)
at com.sun.messaging.jmq.jmsserver.Globals.getStore(Globals.java:967)
at com.sun.messaging.jmq.jmsserver.cluster.ha.HAClusterManagerImpl.initialize(HAClusterManagerImpl.java:181)
at com.sun.messaging.jmq.jmsserver.Globals.initClusterManager(Globals.java:903)
at com.sun.messaging.jmq.jmsserver.Broker._start(Broker.java:777)
at com.sun.messaging.jmq.jmsserver.Broker.start(Broker.java:410)
at com.sun.messaging.jmq.jmsserver.Broker.main(Broker.java:1971)
Caused by: java.lang.NullPointerException
at com.mysql.jdbc.ResultSetImpl.findColumn(ResultSetImpl.java:1103)
at com.mysql.jdbc.ResultSetImpl.getInt(ResultSetImpl.java:2777)
at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:298)
... 16 more
I believe this error is attributed to the NULL value under LOCK_ID. I think that the value under LOCK_ID should be the name of the broker from the config file (even though I specified them in the config files). Any ideas?? THANKS!

Just some pointers -- maybe this will be of use:
If you haven't already read it, please take a look at the [ MySQL setup guide|https://mq.dev.java.net/OpenMQ_MySQLCluster_Setup_Guide.html] .
We recommend using NDB Data-store of MySQL Cluster, though this isn't an absolute requirement. Due to some issues we have found with earlier versions, we recommend using MySQL Cluster, 7.0.9 or better (the current version is 7.0.16, or 7.1.5). Either of these would contain Connector/J.
I'd also recommend using the latest version -- MQ 4.4update2 (just in case you happen to have an older copy). There were many minor improvements in the integration with MySQL from the original 4.4 release, to update 2. This is linked at the MQ download page: [https://mq.dev.java.net/downloads.html]

Can we install a new mssql cluster on the same windows cluster which already containes a mssql cluster with named instance

We have a MSSQL 2008R2 Enterprise edition with a two node active passive fail-over cluster running on 2008R2 windows cluster with out any issues,
Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setup

hi,
>>Now my question is can we add one more MSSSQL cluster instance for the same setup with out disturbing the existing one ?
Yes it is possible .You need to add new drives as cluster aware and install SQL server and put data and log files on thse drives.YOu would need to create named instance of SQL server and need to create different resource group.Both old installation and new
onw would work separately.
>>Also give thoughts on load sharing as the second node is mostly ideal now except fail-over scenarios,
Good point indeed.You are about to create Multi instance cluster and should plan for scenario where one node is down and other node is handling load for both instances.Memory and CPU should be enough to handle the load.
>>Why we go for this situation is because of the collation setting which can be set only one per instance(Database collation setting change not working), we need a different default collation for the new setup .
Just for collation if you are installing new instance seems little wierd to me.You can manage collation at column ,database and at server level.
http://technet.microsoft.com/en-us/library/aa174903(v=sql.80).aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

SAP Integration Kits 3.0 with Crystal Report 2008

Hi,
I have installed Intergration Kits 3.0 and Crystal Report 2008.
I open the Crystal Report Designer from Start >Programs >Crystal Reports 2008 > Crystal Reports 2008.
As mentioned by Ingo, I have ticked the MDX driver setting via SAP menu option.
I clicked on u201CCreate New report from queryu201D
Selected the fields from the Query and placed in the report.
When I click on Preview button, I hits the following:
Database Connector Error: u2018Function module u201C/CRYSTAL/MDX_GET_STREAM_INFOu201D not found.u2019
Another problem that I encountered is when I can only enter UPPERCASE for my SAP BW User ID and Password in Crystal Report (when I try to logon into SAP BW in Crystal by clicking on the u201CCreate New report from queryu201D). So I need to change my password to Uppercase in BW.
Have you encountered this before? I guess it is related to installation problem? Should I uninstall and reinstall again?
Please advise, thank you.

Hi,
So I just need to send the neccessary files mentioned in transports_EN.txt to my basis guys with your instruction. Then I should be able to use the MDX driver in crystal reports already?
Correct!
the SAP BusinessObjects documentation (and Ingo) mentions that the transports have to be imported. HOW to do this is an SAP Basis administration related issue and is NOT described in the BusinessObjects documentation.
As far as I know the appropriate files (there is a dependency related to the version and the type (BW or R/3) of your SAP backend system) described in transports_EN.txt) have to be copied in the directory which is set to be the tranport queue for your SAP system and then the admin can use the STMS transaction to import them.
NOTE: In a BW system you have to import BOTH the SAP Basis transports AND the SAP BW related transports. That means you have to import in total 9 transports = 18 files
Regards,
Stratos

SAP R-3 IDES 4.71 installation with Oracle9i

Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....

ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
 shared lib "dw_xml.dll" version 674 successfully loaded
 shared lib "dw_xtc.dll" version 674 successfully loaded
 shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
 ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting...

SAP BO XI 3.1 SP3 - cluster with 2 nodes - reports pending

Similar Messages

Maybe you are looking for