SAP BPC 7.0 Installation : Processing of dimension

Hi All,
i have installed the SAP BPC 7.0 M , after installation i am able to create application set , application , set security and full optimise the application.
but when i try to process dimesnionm i get the following error.
" there is no data in Mbr table : Processing fail".
but in the excel sheet we have dimesnionmembers

What if you have this issue on 7.0M SP4 and you're still on SQL Server 2005?
I'll be less than impressed if someone tells me to upgrade to 2008 as well.

Similar Messages

SAP BPC 7.5 Installation Error

Hello All,
We got a requirement to install the SAP BPC 7.5 on top of fresh machines with SAP BI 7.02 for our customer. As a part of installation and configuration process i have downloaded the SAP BPC Patches and installed on top of BI 7.02 with enhancement pack 2. created a new apshell Apshell whcih is default. the server was included in a DOmain XX. I also craeted the Dot Net server with domain user and which was included in admin group successfuklly. i was able to see the dot server manager diagnoistic green and successful. Now the real confusion starts.
1. After installation of BPC DOT NET server on Windows 2003 server wich was already included in the domain now when i ca access the server http://localhost/osoft which is taking me to the screen sap bpc console and givig me a couple of options like
1.Interfact to word
2.interface to powerpoint
3. Interface to excel
4.Interface to web
5.Administration
when i click on administration it is taking me to second screen where it is askig me to select Appset in a small popup windows. There i dont have any popup to select where as it is leading to empty screen where there is no popup. when i click on ok then it will lead to again the main screen it have all the options interface to word,powerpoit etc..,
I am really confused where i am missing ad whether i need to do anything else more for the same.
I also see lot more in the installatio guide like select apshell.db9 etc where i am unable to see that option. i no where saw the file with name apset. I also saw in the some blogs and installation guide saying that to select the option install on top of mssql2005 where as i didnt see such an option anywhere.
Can any one guide me o this where and what i am really missing.
Edited by: Hemanth Kumar on Dec 25, 2010 5:18 PM

Hi,
This is one of the most common error I encountered during my recent BPC Project . This can be solved by the following ways.
1.Please check the authorizations ( make sure to have full admin authorizations for the Apshell) .
2.Make sure to Re- install both admin & client tools (check the Diagnostics and uninstall re-install both admin & client tools once.)
Regards
CSM Reddy

SAP BPC 5.1 Installation

Hi
When i am trying to install the SAP BPC 5.1 for SAP OFFICE CLIENT CONSOLE ......
Its Shows Some Error :
An Error (-5006: 0x80070005) has occurred while Runnning setup
Please make sure you have finished any previous setup and closed other applications .
if error still occurs .please contanct your vendor :sap (##ID_STRING11##)
Error Code : -5006: 0x80070005
Error Information :>setupnew\setDLL.cpp(841)
Papp : SAP Business planning and Consolidation for office client
Please
Regards
Dayalan M

I suggest to perform the follow steps:
1. Do a client Diagnostic from Client Software Page and make sure everything is green and you have all prerequisite software installed.
2. Make sure you are connected into you PC with an user which is administrator. Otherwise you are not able to install BPC client.
3. Open Add Remove programs and make sure you don't have a previous installation of SAP BPC. Any other version later than 5.x must be removed to be able to install BPC 5.x client.
4. Restart your computer and try to install again BPC client from Client Siftware page in case if you validate steps 1,2,3.
Regards
Sorin Radulescu

SAP BPC 7.0 Installation fail

Hi All ,
i completed the prerequiste installation ( windows server 2003 , asp.net 2.0 , sql 2008 sp1 ) for SAP BPC 7.0 on single server environment ( 64 bit machine)
when i click on the very first step for BOC Installation i get the following error
setup.dll fail to install when we proceed with BPC installation.

Hi Ashok,
If you have know how to solve the issue, Please reply back with the steps.
I am exactly having the same issue that when I try to install the app, I get the setup.dll failed to Register error.
I am trying to install BPC 5.1 on the MS environment and we are on the 32 bit operation system.
Thanks
Sandeep

SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

Hallo Forum Participants,
I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
What are the features of BPC InfoObjects in Comparision with regular InfoObject?
How can I load Hierarchies into InfoObject?
What else I must take into account?
Why does not work this simple test?
Regards.
Alisher
Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

Hallo pkrishna,
so it is successed with master data load, but without hierachiies.
My Master Data Properties on Dimension Sheet are:
-ID
-EVDESCRIPTION
-PARENTH1
-CURRENCY
I have mapped as below:
ID=ID
CURRENCY=/CPMB/CURR
/CPMB/CURR- my technical id in BW.
In the Note you advised transformation file has been mapped like below:
-NODENAME=NODENAME
-HIER_NAME=HIER_NAME
-PARENT=PARENT
-ORDER=ORDER
After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
Have you any Idea?
regards

Shrink Transaction log file - - - SAP BPC NW

HI friends,
We want to shrink the transaction log files in SAP BPC NW 7.0, how can we achieve thsi
Please can you throw some light on this
why we thought of ghrinking the file ?
we are getting "out of memory " error when ever we do any activity. so we thought of shrinking the file (this is not a production server - FYI)
example of an activity where the out of memeory issueee appears
SAP BPC excel >>> etools >>> client options >>> refresh dimension members >>> this leads to a pop-up screen stating that "out of memory"
so we thought of shrinking the file.
Please any suggestions
Thank you and Kindest Regards
Srikaanth

HI Poonam,
Not only the excel is throwing this kind of message (out of memory) - the SAP note is helpful, if we have error in excel alone
But we are facing this error every where
We have also found out that our Hard disk capacity as run out of space.
we want to empty the log files and make some space for us.
our hard disk is now having only few MegaBytes now
we want to clear our all test data, log files, and other stuffs
Please can you recommed us some way
Thank you and Kindest regards
Srikaanth

SAP BPC doesnt process dimensions, but it shows that was successful

Hello Experts,
We are using SAP BPC 7.0M SP7 with the StarterKit. When we try to process a dimension, it finishes in step 1 of 4, and software says that it was successful, but in BPC Excel we cant show the changes in our dimension, so its not processing anything. Also it doesnt show any info about the process.It also happens in the original IFRS (Application set of the StarterKit), not only in our customized application set.
Any idea about how we can solve it?
Best Regards,
Juan
Edited by: JAnchuelo on Jun 9, 2010 11:31 AM

Hello,
You can take a look at mbrDimension Name within the database to see if it has been added. You can run a query for the member ID to verify that it's been added.
In any event, please let us know.
Regards,
Jason

SAP BPC - Dimension disappears during processing

For some reason my dimension file (the excel file in the adminapp folder) disappears from the server during processing.
I get this error:
The server was unable to process request. --> could not find file "installationdirectory\AdminApp\account.xls"
Why does this happen and how do I solve this?
regards,
Edited by: E.F.P. van Toor on Jun 3, 2008 5:34 PM
Edited by: E.F.P. van Toor on Jun 4, 2008 9:40 AM

Hi,
We had the same problem in BPC 5.1 SP2.
I'm not sure that I'm right but I think it has something to do with the Save to server.
Normally this takes only 1 or 2 seconds, but sometimes it's taking much longer and when you start processing your dimension when it's still saving the dimension, it's deleting the xls file on the server, I had it 3 times.
Now I wait long enough before I process my dimensions and I didn't had the problem anymore.
I didn't log the problem because it's almost impossible to simulate the problem.
Regards,

How to use the RateEntity dimension in SAP BPC?

Hello everbody,
I am implementing a consolidation process using SAP BPC. I want to use the RateEntity dimension, to translate a same currency into different exchange rates depending on the company.
I want the company which ID is GFU (which is from Brazil) in LegalEntity dimension is converted using a special exchange rate. I have added a GFU member in RateEntity dimension, and I have entered the exchange rates for the member GFU and for the member Global in RateEntity dimension.
But the problem is that after I run the FX Restatement package, converted data for this company is not the proper one, because Global exchange rates have been used instead of GFU exchange rates. Does anybody know why? Do I have to do anything else?
Thank you very much for your time

Do you see the search functionality in the upper left of the screen?
Okay, now type in ecatt, press enter and in the next screen filter on blogs.

Custom Process Types not working in SAP BPC 10.0

Hi Experts,
We have migrated from SAP BPC 7.5 NW to SAP BPC 10.0 NW.
We have three Custom Process Types created in BPC 7.5NW using the super class CL_UJD_SIMPLE_ACTOR as super class.
It has been made Obsolete and Final class in BPC 10.0NW and the Custom Process types are not running as expected.
Can you please suggest if there is any alternative for using the existing custom process types? Or do we have any alternative for creating custom process types?
*Note: We have tried replacing the superclass with CL_UJD_ACTOR instead of CL_UJD_SIMPLE_ACTOR but of no use.
Regards,
Balraj.

Hi Inl,
The statement looks fine, just confirm:
Your CATEGORY dimension is named CATEGORY? Is it really has property COMPARISOIN?
Can you show the screenshot of UJKT run of script?
What is your core BPC SP?
Vadim

Background process of SAP BPC 7.5 or 7.0 NetWeaver or MicroSoft version

Hi Experts,
I am new to SAP BPC NetWeaver. I want to know u2026.
While creating a dimension or an application in BPC 7.5 or 7.0 NetWeaver or MicroSoft Version, what process is going on background, like what tables or what objects are created in SAP BI 7.0 or in MS SQL Server?
Appreciate your help.
Regards
Raja

Hi Experts,
I am new to SAP BPC NetWeaver. I want to know u2026.
While creating a Characteristic InfoObject for Master Data in SAP NetWeaver BW. It creates
/BIC/P<InfoObject Name>          P table or Attribute Table
/BIC/T<InfoObject Name>          Text Table
/BIC/H<InfoObject Name>          Hierarchy Table
/BIC/M<InfoObject Name>          View of P Table or Attribute Table
/BIC/S<InfoObject Name>          SID Table
/BIC/K<InfoObject Name>
/BIC/I<InfoObject Name>          Maintain Parent Child relationship
My query is:
Does this SAP BPC 10 or 7.5 or 7.0 NW dimension, which is equivalent to an InfoObject in SAP BW creates the same tables in the background in SAP BW.
An InfoCube of SAP BW is connected with the Dimension Table. This Dimension Table is connected with the SID Table. This SID Table is connected with the Characteristic, which is connected with Attribute Table, Text Table, and Hierarchy Table. Does this SAP BPC 10 or 7.5 or 7.0 NW cube follow the same structure.
Appreciate your help.
Regards
Raja

Cannot maintain dimension members in SAP BPC

Hello, Masters in BPC
I have just create mention and want to input data, I used maintain dimension members CUSTOMER in SAP BPC but It seem not effect although I press Process dimension already and I open excel and paste data also saved them already. When I open other dimension and reopen CUSTOMER but nothing is shown.
Please give me a advice to resolve the problem.
Thanks you so much.
Best Regards
Chinh

Dear Raju,
Yes, I did it some times but nothing is happen,
I maintain dimension members, I did it as below:
- Choose maintain dimension members
- copy data from excel file and paste into the dimension
- click process dimension
Show a dialog
- Uncheck Take system offine
This task is successful.
but I go to dimension ACCOUNT in order to insert data,
I came back maintain dimension members : CUSTOMER but I see no data is displayed.
It is the same for ACCOUNT when I want to see data on that dimension
when I try one more time , I click save to server, The Error message show that : Dump Error
I reinstall BPC client and its patch but nothing to change
How can I do???
Thanks

BPC 7.5 NW Processing Dimensions Microsoft.Office.Interop.Excell issue

Hi
I've tried all the downloads (service Packs, Interop Files etc) mentioned in all websites and posts to try and fix following error:
"Unable to cast COM object of type 'Microsoft.Office.Interop.Excel.ApplicationClass' to interface type 'Microsoft.Office.Interop.Excel_Application'. This Opperation failed because the Query Interface call on the COM component for the interface with ID '{000208D5-0000-0000-C000-0000000000046}' failed due to the following error: Library not registered.
I get this only when I try to Process a dimension
Please can anyone tell me how to fix this?
We have installed BPC 7.5 NW
I had Office 2010 and could process but my input schedules didn't work 100% on Office 2007 so I had to go back to 2007. And now I can't process in the Admin Client. I've uninstalled and reinstalled Office and BPC 7.5 NW SP07 a few times to try and solve this but no luck.
Thanks
Johan Fourie

Hi,
If you are using excel 2007, you need to install the redistributable primary interop assembly from the below link:
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134363332383926
Hope this helps.

BPC 7.5 NW process dimension

Hi ,
We have recently upgraded to SAP BPC 7.5 SP17 from SP14 . When processing one of the dimensions we observed i
it is completing successfully but we see the below error.This is causing an error while loading dimensions data
in extended analyzer. Please let me know if any one had faced a similar situation. thanks.
Regards,
SSK

Could you please run program UJA_DATA_CHECKER and check the output?

Why not displayed new member in dimension sap bpc?

Good day guys
I have the following problem:
Add new members to a dimension but not displayed.
example: DIMENSION(inputcurrency) added MEMBER: MXN (Mexican Pesos); when I excel interface I can not see the new member, before this process the dimension and active AppSet.
that could be?
Use SAP BPC 7.5 SP8

Hi Bish,
Without processing a dimension the data should no go to the database. If you modify the the dimension and you want those new members in report you have to process that dimension. And if you save that dimension after modification its save the members in application sever. while retrieving the data it pick up from the database layer not from application layer, So the on fly calculation are stored in application layer( Like conversion files, Transformation files, script logics and Member formulas). So if you want the new members in report you have to process. Its by SAP design it self.
After modification of dimension no need to logoff and login every time. In order to avoid that option we have a anothe solution that is Activate Metadata Cache option.
In order to use that go to EPM--> User OPtions---> Activate metadata Option
You can clear the metadata cache. When the cache is cleared, the structure of the data source you are connected to is synchronized with the structure copied locally; which means that the members of dimensions that have been added, modified or deleted in the data source are loaded.
For more details related to Metadata option go to the EPM 10 Office Addin User Guide document which is available in google free of cost
Regards,
Saida Reddy G

SAP BPC 7.0 Installation : Processing of dimension

Similar Messages

Maybe you are looking for