SAP BPC 7.5 NW SP09 - full optimize never ends. Job can not be stopped

Hi experts,
we sent a full optimize process in order to compress an application but it never finished.
I noticed that through BW transaction RSPC the process chain: Full optimization stops in "Collapse box" step and become red.
so the cube were locked and can not be used. we checked through in BW TE SM50 that process is in "Running status"
I tried to stop it through BW TE SM37 but can not be done due its status.
Please any idea how to stopped it and how solved full optimization issue?
thanks

Try cancelling it from SM50 (with core or without core). Never run Full Optimization for compression, run Light Optimization if you need to compress a cube.
Gersh

Similar Messages

SAP BPC 5.1 SP2 Http 500 internal server error - page can not be displayed

When our Sysadmin service account are restricted to the app server and the database server ( as they should be in a secured environment) no client
could reach the web site to even use the Osoft directory . We get a Http 500 internal server error - page can not be displayed . This is for a new multiserver install. Is there a problem on the website security or .net configuration?

Yes the install was done by the SAP install consultant but now we are getting an error when we restrict the Sysadmin ID. Server diagnostics and other tests on Appshell passed as well.

SAP BPC 7.5 Client, Silent install but with progress bar, can it be done?

Hi All,
I need to uninstall the BPC 7 Client and then deploy 7.5 to around 250 users accross the country.
We have SCCM (SMS) in place so will be using that.
I have the uninstall of 7 sorted and I have the response file etc sorted for the silent install of 7.5 and the install runs, silently, no issue.
Is there a way though that one can "turn on" the progress bar during the install? So that users dont shutdown or disconnect in the 15min it takes the install to run.
By way of example, in the SAP Business objects enterprise client on can configure the Silent install so that although it never prompts the user for a reponse there is a progress bar that runs, indicating that there is an install in progress.
Thanks in advance,
Bryan

Hi Sebastian,
No worries, I am using a pop up countdown so the users have some idea on progress. Would love to know why the install runs for over 15min.
In the above case the uninstall was easy as we had deployed using MS AppV so it was just a case of deleting the advert in SCCM and the application was pulled from the users desktops.
For 7.5 I am using a vbscript with following to uninstall:
The install string pulled from the clients registry uninstall folder:
RunCommand Chr(34) & "C:\Program Files\InstallShield Installation Information\{EC8753EF-EE78-48B5-A4D0-FBBD237B5D53}\setup.exe" & Chr(34) & " -runfromtemp -l0x0009UNINSTALL -removeonly"
We create a custom link, so this deletes it.
DeleteFile "c:\Users\Public\Desktop\SAP BPC 7.5.lnk"
You should be able to create something similar for 7.0 & 7.1
Hope that helps,
Bryan

Full Synch risk analysis job is not running good

Hi
Recently we have started user_full_synch_risk_analsysis job is running but with many error..
I have checked the SLD it is running, JCO also tested good..checked in debugger...tried to look the data..working good..
but the log saying "can not extract the data from DEV system"
it is skipping each userid risk analysis saying the above error and it continuing with other userIDs.. Please help
INFO: Job ID:18 : Exec Risk Analysis
Sep 27, 2010 7:51:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
INFO: Job ID:18 : Analysis starts: XRPM_PM2
Sep 27, 2010 7:53:04 AM com.virsa.cc.comp.BgJobInvokerView onActionsearchObj
INFO: Number of users matched:132
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.meng.MatchingEngine matchActRisks
WARNING: Error :
com.virsa.cc.dataextractor.dao.DataExtractorException: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.searchUser(DataExtractorSAP.java:551)
     at com.virsa.cc.dataextractor.bo.DataExtractorSAP.userIsIgnored(DataExtractorSAP.java:529)
     at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:682)
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:112)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:18 : Failed to run Risk Analysis
java.lang.Exception: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
     at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:118)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
     at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
     at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1331)
     at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
     at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
     at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
     at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
     at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
     at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:480)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=18 and object(s):XRPM_PM2: Skipping error to continue with next object: Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=18, status=2, message=Error while executing the Job for Object(s) :XRPM_PM2:Cannot extract data from system (DEV); for more details, refer to ccappcomp.n.log
Sep 27, 2010 7:58:30 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis

Dear Harikrishna,
Please mention what is your Support pack. This is an identified bug for SP12 especially synchronizing the users from the backend and doing the risk analysis at the user level. We had the same problem. But for some reason we are now able to do the synchronization from the backend but the management reports are getting updated.

When I go to hotmail the site comes on it says loading friends and then a page full of words come on, can not log into hotmail

When I go to hotmail.com the website comes on fine, to the right it says loading messenger friends, it stays like that for a min. then a page full of words come on screen like programing info. I have no problem with IE or Google Chrome

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have a full Apple account and I can not activate my phone

after having updated my ios to the latest version, I can not activate my iphone, and shows me the following message
incorrect apple id cannot be used to unlock this iphone
iPhone 5c, iOS 7.0.5

Are you absolutely positive it's asking for your Apple ID password and not the device pass code? They're not one and the same. Device pass ode is just four numbers.

Full Optimization and rearrangement of dimensions

In BPC, there are times when Full optimize u2018mayu2019 create a new cube if rearrangements of dimensions gives more optimal performance. Also, upon transport, the technical name u2018mayu2019 be different for the same reason.
My questions - how and when does BPC system realize to rearrange dimensions? Is it during every full optimize?
I hope data does not get affected, but what gets affected?
In basic terms, what is "rearrangement of dimensions"?
Also, when should we do full optimize?
When we transport, does that change the technical name?
Thanks.
Anand

Hi Anand -
Part two...
This process being understood, on your specific questions:
How and when does BPC system realize to rearrange dimensions? The decision to rearrange dimensions is based upon an analysis of transactional data and sizing of the underlying SID tables supporting that data
Is it during every full optimize? Not necessarily.
I hope data does not get affected, but what gets affected?
Data is retained, but if the cube is reorganized then the technical name of the cube supporting the BPC application may change during the process.
In basic terms, what is "rearrangement of dimensions"?
Rearrangement of dimensions is the process where the BW characteristics are reassigned to different BW dimensions to promote an optimal data model.
Also, when should we do full optimize?
If you suspect that your performance has degraded due to changes in your transactional data storage patterns, you may need to update your current BW data model to achieve the best performance from your application.
When we transport, does that change the technical name?
There is guarantee that the same technical name will exist in the target system, so the answer is maybe not. Please rview the folowing blog for more details on name retention after transport:
[/people/sheldon.edelstein/blog/2010/03/30/bw-objects-technical-name-changeability-for-sap-bo-planning-consolidation-version-for-netweaver|/people/sheldon.edelstein/blog/2010/03/30/bw-objects-technical-name-changeability-for-sap-bo-planning-consolidation-version-for-netweaver]
Regards,
Sheldon

Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW

Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
Qadeer

Hi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv

SAP BPC Certification

Hi Experts,
I am not sure if this is the right forum to discuss SAP BPC related queries and about certification for the same. If not please direct me to right forum.
So here is my query regarding certification.
Looked at SAP's curricula.. I can find BPC 7.5 certification. But it requires one to have attended both netweaver and MS version.
Do we know if there is only netweaver based certifcation?
Thanks,
Arun

Hi Arun,
Not that I am aware of, if there is a seperate Certification for NW and MS versions available.
However you can go through the link in which you can find SAP BPC 7.0 and BPC 7.5 Certification details.
http://wsvprd1b.pearsonvue.com/Dispatcher?webApp=ExamList&webContext=CandidateSite&cid=407
Hope this clarifies.
Best Regards,
Chakra Pani

SAP BPC 10 Checking Patch Level

Hi,
I just want to clairfy my understand of how to check the patch level for SAP BPC 10. If I go to System -> Status: I can see Component: CPMBPC, Release: 801, SP-Level: 0003.
Does this mean that SAP BPC is in Support Package Level 3? In turn I have checked and it looks like the latest one is Support Package 12?
Is this correct?
Cheers,

Hi Sara,
CPMBPC 800 and CPMBPC 801 are two different components, the one is with enhancement pack 1 in the BW component.
you can not install SP13 on a 801 to get SP6 according to you list.
your list is not correct, please see correction below.
CPMBPC 800 SP1
CPMBPC 800 SP2
CPMBPC 800 SP8 = CPMBPC 801 SP1 ( = means they have the same corrections and functionality )
CPMBPC 800 SP9 = CPMBPC 801 SP2
CPMBPC 800 SP13 = CPMBPC 801 SP6
Andy

SAP BPC Upgrade methodology

Is it possible to Migrate SAP BPC 4.2 to directly to SAP BPC 7.0 M version : SAP BPC Migration from 4.2 to 7.0 M version can be done in either one step or two stepsplease highlight the pros and cons of doing it either way ? SAP has suggested our client two step process, and in Upgrade guide there is mention of one step upgrade. Kindly clarify.

Hi,
This is a published link for BPC Migrations.
The Migration Office will help after signing up at the following link.
Regards,
Anila

SAP- BPC (MS Version 10.0) : How to get data from MS SQL !!!

Appreciate, if any one can assists regarding data uploading from MS SQL (2005/2008) to SAP BPC - (EPM - 10.0). Thanks.

Hi Deepak,
Thanks for your email. Actually we not using SAP NW, our BaaN ERP database exist on MS SQL (2005). That’s why we have purchased SAP-BPC 10.0 MS version.
Really appreciate if you can assist to resolve this issue.
Thanks,
Nasar Khan

Bunch of ERRORS after installing SAP BPC 5.1 for the first time

Hi guys
Our basis guy is installing SAP BPC 5.1 for the first time. After the installation, I can get into SAP BPC - Administration screen but I get a lot of errors when I try to do some changes. Some of them are -
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
    Error on uncompressing file: Error : ActiveX component can't create object.
2. Create dimensions -
    Split File Error
3. Delete dimensions -
   OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
4. BPC for Excel (I am logging in as a system admin)
    The dimension information file cannot be created. There may be a network or security issue.
    Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
I am sure I will get a lot of errors once I start playing with the configuration.
Please comment.
Thanks,
Ameya Kulkarni

Hi Ameya Kulkarni,
I sorry I wrong type something,
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
Error on uncompressing file: Error : ActiveX component can't create object.
==>
You should do this step such as:
1. copy file "XceedZip.dll" into the directory SAP BPC
2. register that file into the register window using sintaks: "regsvr32"
3. If the successfully message box appears, You should open the MS.Excel or SAP BPC administration
2. Create dimensions -
Split File Error
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
3. Delete dimensions -
OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
4. BPC for Excel (I am logging in as a system admin)
The dimension information file cannot be created. There may be a network or security issue.
Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
==>
You must solve the problem no.2&3 because you should add new user through SAP BPC Administration for the application.
I wish My Suggestion can help you.
Regards,
Wandi Sutandi

/sap/bc/webdynpro/sap/diag_app_starter Invalid ApplicationID. Can not proceed with Jumpin

Hi all,
In the Technical Monitoring and Monitoring System, when I selected the system configuration menu. Nothing is displayed.
I checked the service with transaction SICF
/sap/bc/webdynpro/sap/diag_app_starter?sap-client=100, I have this error message:
Invalid ApplicationID. Can not proceed with Jumpin
Thanks

Hi Oussama,
Did you resolve this issue. I am also having same error when trying to setup Central System Administration.
SM_Workcenter
Technical Administration work center, under Related Links, Choose "Central System Administration --> Configuration.
Error: "Invalid Application ID . Cannot proceed with Jumpin."
Thanks
Syed

Full Optimize Error - OutOfMemmory in SAP BPC

Hello
Has anyone come across the following error when running a full Optimize from SAP BPC Administration.
Error Message: Exception of type system OutOfMemoryException was thrown.
I've raised a support call but would appreciate any help on knowing why this happens and how I can resolve it.
Many thanks
Hina

Hello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia

SAP BPC 7.5 NW SP09 - full optimize never ends. Job can not be stopped

Similar Messages

Maybe you are looking for