SAP BPC NW- input schedule refresh issue

Hi,
I have created a input schedule which is working fine on my machine in dev and production and same is working fine in dev on my client machine but it is not working in the production system.
I checked the input schedule in Production and found that EDVRE is not ok on my client machine but same template shows no error on my machine.
Please suggest if i am missing someting.
Regards,
Sanjeev Kumar

Hi Sanjeev,
Without looking, it will be very difficult to tell the reason.
When you are saying that the EVDRE is not OK, then check in the first cell, where EVDRE formula is written. You need to trace it down. It will be difficult for us to say. However, I have a feeling that there must be some problem in the key ranges only. Check the formulas as well.
Hope this helps.

Similar Messages

SAP BPC 7 Input schedule refresh issue

Hi,
I have created a input schedule which is working fine on my machine in dev and production and same is working fine in dev on my client machine but it is not working in the production system.
I checked the input schedule in Production and found that EDVRE is not ok on my client machine but same template shows no error on my machine.
Please suggest if i am missing someting.
Regards,
Sanjeev Kumar

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

BPC 10.0 Input Schedule refresh : investigating performance issues on frontend side

Hello,
We are running SAP BPC NW 10.0 SPS8.
We recieve a lot of complaints regarding performance issues.
More specifically BPC Input Schedule refresh takes ages (11 minutes actually)
I am a SAP Basis Administartor with some solid BW experience, but very linited BPC knowledge.
So raf we have tried the following :
* BPC Full and light ptmimize of the BPC Cubes.
* Updating Oracle Statistics
* Activating ABAP/SQL traces*
* Checking USJTAT Logs
Then it rutned out that the perfromance problems werre not caused by the backend SAP BW server (only 9 seconds of bakend processing are displayed in UJSTAT).
The overwhelming majority of the processing is spent on the frontend side : on the computer of the user.
We really would like to know what is happening on BPC Frontend side, but are really lacking any investigative method .....
other that checking memory/CPU usage o nthe frontend computer.
From your experience, is there any tool/method to allow to conduct some investigation on what is going on the frontend side, when a BPC Input Schedule is refreshed ?
Thank you for your attention.

Hello Vadim,
We still need to get confirmation from the external consultants who developed the BPC solution, but as far as I can understand it :
We do not use use member formulas
We are indeed talking about EPM (without EPMRetrieveData functions)
The perfromance problems occur in DEV and QAS , after a restore of the BPC environment (backup from PRD)
We already had the problem in the past, but we never knew precisely how to solve it, it is as if there was some missing links between the restored BPC environment from PRD and the DEV/QAS system
One additional information, we checked the EPM CLient Log , and here are the errors displayed while refreshing the input schedule :
The thing is that I have no idea what it means ...
?FILE_TYPE:DAAA96DE-B0FB-4c6e-AF7B-A445F5BF9BE2
RECORD_SEPARATOR:35
COLUMN_SEPARATOR:124
COLUMNS:Time|Severity|Category|Method|User|DSRRootContextID|DSRTransactionID|DSRConnectionID|DSRCounter|Thread|Text
SEVERITY_MAP:DEBUG|Debug|INFO|Information|VERBOSE|Verbose|WARNING|Warning|ERROR|Error|FATAL|Fatal
HEADER_END
2014-04-18 08:41:17,446|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
2014-04-18 08:41:18,613|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
2014-04-18 08:41:18,630|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
2014-04-18 08:41:18,648|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
2014-04-18 08:41:18,731|ERROR|ReportManagement|FPMXLClient.Office.EPMExcelReportManagerRepository.GetReportManager|BPCUSER|||||1|Unable to get the Object property of the OLEObject class#
2014-04-18 08:41:37,171|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 1#
2014-04-18 08:41:39,348|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
2014-04-18 08:41:39,474|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
2014-04-18 08:41:39,536|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
2014-04-18 08:41:39,597|ERROR|ReportManagement|FPMXLClient.ReportManagement.DynamicReport.Load|BPCUSER|||||1|bytes = 0#
2014-04-18 09:00:22,088|ERROR|Dataservice|FPMXLClient.BPCProxy.MetaData_Data.DataServiceHelper.ExecuteReportAsStream|BPCUSER|||||ServerCallThread_666f378d-d824-4a8a-bf38-0da8493e2382|An error has occured on the server#
2014-04-18 09:00:22,252|ERROR|BPC10Connection|FPMXLClient.Connection.RESTConnection.ExecuteReport|BPCUSER|||||ServerCallThread_666f378d-d824-4a8a-bf38-0da8493e2382|An error has occured on the server#
2014-04-18 09:00:22,268|ERROR|OfficeWrappers|FPMXLClient.Office.EPMReportManager.ExecuteReport|BPCUSER|||||1|An error has occured on the server#
2014-04-18 09:00:22,317|ERROR|OfficeWrappers|FPMXLClient.Office.EPMExcelReportManager.RefreshReports|BPCUSER|||||1|An error has occured on the server#
2014-04-18 09:00:22,447|ERROR|AnalyzerOne|FPMXLClient.AddIn.RefreshSheetWithScan|BPCUSER|||||1|Execution of Report Default Report failed : #
2014-04-18 09:00:22,537|ERROR|Automation|FPMXLClient.EPMAddInAutomation.RefreshActiveSheet|BPCUSER|||||1|Execution of Report Default Report failed : #

To open a BPC excel input schedule through a Business Process Flow

Hi,
I have a Business Process Flow that has to open an excel input schedule.
In the define actions tab of a Process step, I have chosen the BPC for excel interface and open template option.
I browsed the necessary template to be opened.I have also provided the required inputs for member selection.
Now when I open the Business Process Flow and Select this Process step, it opens only the BPC for excel interface and not the excel input schedule template.
Can anyone expalin the reason that caused this problem and also a solution to fix this issue ?
PS :I am trying to open this Business Process Flow using BPC Web and my BPC for excel is not open yet.
Thanks in Advance

Hello Aparna,
Please select Application name in BPF.
Please check for Application name in which you are opening the template.
Thanks,
Satish

SAP BPC 10 - Error on Refreshing Reports Input Forms

Hi all,
We are working on an BPC 10 Consolidation project for the Netweaver Version.
We setup the Environment, Dimensions, Models, etc. We created a few reports too using the Excel interface.
These were tested and they worked well.
However, then one day we started getting this message, whenever we opened any Report or Input Form -
"The Report that was defined is invalid - at least one of the axis contains no members."
We observed that this message appeared when there was no data available for EPM Context (Current View) given.
In short -
- The data is pulled out in the report, where for a CV there is data available.
- However, if the CV is changed to something which has no data available, the report does not go blank (i.e. does not get refreshed) and it keeps showing the old figures.
We tried opening reports in the SAP delivered IFRS Starter Kit too but got the same message.
We are not able to locate what went wrong. Did we change any option by mistake.
If anybody has faced this message and got it resolved or has an idea why this message might be appearing, please reply.
Any help would be highly appreciated!
Thanks!
Rajneesh

Hi Rajneesh,
Check whether you have both the row-axis and column-axis of the input template through 'edit report'.
Probably your input template has some member dimensions missing in your template.
We have faced the same problem before and corrected it.
This error occurs sometimes when we create a input template by clearing defining the row & column axis in the template but afterwards try some EPMOlapmember in any axis by deleting the original report elements.
So check the input template once again. I think you will track the error.
Regards,
Bishwajit

SAP BPC 5.1 Script Logic Issue

Hi Guys,
I have a problem with Inventory Days script logic at the moment. Basically what the logic should do is:
1. Copy the required data across to a calculation category (SQL)
2. Calculate the last 12 months Cost of Sales for every entity in the selection for 3 years (MDX)
3. Use the Cost of Sales number and multiply it with the inventory days number (SQL)
The calc works fine for some of my smaller brands (200 - 500 entities), but when i run the logic for my big brand (2000 entities) the last step doesn't calculate correctly. I have done the following to try and fix the problem.
1. Every step has it's own COMMIT
2. I clear the data before writing anything
3. I use XDIM_MAXMEMBERS Entity = 500
Any ideas why the logic is acting like this? I don't know if I am allowed to post my code here, but if it will help i will
Regards,
Andries van den Berg

Hi,
I only sent you the step that is giving me a problem at the moment. I broke the logic up into different packages to check where the problem lies and narrowed it down to this one.
It seems like the code didn't copy across correctly, it is supposed to be when EXTRAP.BRAND "<>" "". I'll just paste the code again, just so that we are all on the same page.
Regarding the FAC2, the client was running the code a lot of times and the WB table was getting huge. So, i started posting the records to the FAC2 table and processing it in the SSIS package. And i did confirm that they are posting there.
I just tried to run the script for half of the entities and it didn't work. I then tried to run is for 25 entities and it worked. Could the *XDIM_MaxMembers Entity = 50 be giving me the problem? This is all i get over and over in the formula log:
RPTCURRENCY,ACCOUNT,CATEGORY,DATASRC,ENTITY,INTCO,TIME,SIGNEDDATA
LC,80500,BUDGET,INPUT,P71559,NON_INTERCO,2010.AUG, 0
The other thing that bugs me is that i have similar script that never gives me issues for the same client.
Regards,
AvdB
//Step 4 -- Calculate the Inventory per month for all the entities selected
*SELECT(%BUDGET_YEAR1%,"[BUDGET_YEAR1]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET1%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR1% AND [CALC] = 'N'")
*SELECT(%BUDGET_YEAR2%,"[BUDGET_YEAR2]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET2%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR2% AND [CALC] = 'N'")
*SELECT(%BUDGET_YEAR3%,"[BUDGET_YEAR3]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET3%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR3% AND [CALC] = 'N'")
*XDIM_Memberset Time = %BUDGET_TIME_SET1%,%BUDGET_TIME_SET2%,%BUDGET_TIME_SET3%
*XDIM_Memberset Category = TOPDOWN, BUDGET
*XDIM_Memberset Entity = %Entity_Set%
*XDIM_MaxMembers Entity = 50
*XDIM_ADDMemberset ENTITY = CLKS,MUS,BS // Add global entities
*XDIM_Memberset ACCOUNT = Last12FSCoS,Last12DispCoS, InventoryFSDays, InventoryDispDays //Add the caculated CoS account from the previous step and the Global Driver for days
*WHEN ENTITY.EXTRAP_BRAND
*IS <> ""
*WHEN CATEGORY
*IS TOPDOWN
*REC(EXPRESSION=(GET(ACCOUNT="Last12FSCoS",CATEGORY="TOPDOWN")*GET(ACCOUNT="InventoryFSDays",ENTITY=ENTITY.EXTRAP_BRAND,CATEGORY="BUDGET")/365)*-1,NOADD,ACCOUNT="80500",CATEGORY="BUDGET")
*REC(EXPRESSION=(GET(ACCOUNT="Last12DispCoS",CATEGORY="TOPDOWN")*GET(ACCOUNT="InventoryDispDays",ENTITY=ENTITY.EXTRAP_BRAND,CATEGORY="BUDGET")/365)*-1,NOADD,ACCOUNT="80510",CATEGORY="BUDGET")
*ENDWHEN
*ENDWHEN
*WRITE_TO_FAC2
*COMMIT

Launch specific BPC Excel Report/Input Schedule or BPF from Infoview

Hi all,
We would like to launch either a specific BPC for Excel report and/or input schedule, or link to a specific BPF from BOBJ Infoview (probably a Webi report).
Therefore is it possible to provide a url to Webi to do this?
This is BPC NW 7.5
Many thanks,
Andy

Hi you all,
we are dealing with the same problem in our project. Our customer is implementing BPC and wants the Excel input schedules to be launched from the same place where their current BI (BO) reports are stored. That's InfoView, or actually soon BI Launchpad 4.0.
Is it anyhow possible to launch a normal BPC Excel input schedule directly from InfoView/BI Launchpad? I tested a bit with OsCLD function with a published Input schedule, and using the link OsCLD returns as Launchpad hyperlink, it's possible to open the .xls file in Launchpad browser window. Of course, none of the BPC's own structures or functions are there so it's just a plain excel sheet, not an really input schedule... so I guess BPC for Excel must be running when opening them and that pretty much is the same as using them directly from the Excel UI. But it's not the solution the customer wants to use.
Their reason for using Launchpad is that they control user access to their current reporting with the InfoView folder structure and want to use the existing authorization this way for BPC planning too.
Any suggestions?
BR,
Andy

Issue with refresh of an input schedule

Hi Experts,
We are facing an issue with the refresh of an input schedule.
We have a custom refresh via macro whereby we first refresh 3 reports in other tabs and then refresh the main schedule.
The problem is for a particular test id we need to click on refresh twice but for developer id we refresh it only once and see the value.
Can you help what could be the cause of it.
In the main report we have all dimensions in either row or column axis and we are also using Dimension override for 3 dimensions.
Let me know if any other info is required.
Thanks
Raman.

Hello,
Could you please specify the following information:
1) What do you mean by "custom refresh"? is this feature developed by the custom development team?
2) What are the level patch and the version of the product?
Regards,
Inès

Assymetric report(input schedule) in SAP BPC

What I mean!?
I want place in row expansion two dimension. Connection between members of these dimensions i described on example 1.
I would like to build report(input schedule) like in example in analytical systems it call assymetic report. By means standart functional I can achieve only example2.
Any suggestions will be appreciable.
Regards
Example 1
Division1
   ---         Cost1 100
---           Cost2 200
Division2
---           Cost3 200
---            Cost4 300
---            Cost5 100
Division3 Cost6 500
Example 2
Division1
---Cost1 100
    ---        Cost2   200
    ---        Cost3
    ---        Cost4
    ---        Cost5
    ---        Cost6
Division2   Cost1
     ---            Cost2
     ---            Cost3 200
     ---            Cost4 300
     ---            Cost5 100
     ---            Cost6
Division3 Cost1
     ---            Cost2
     ---            Cost3
     ---            Cost4
     ---            Cost5
     ---            Cost6 500

Vijay,
   you can achieve this with a single evdre saved as an Input schedule...
couple of pointers
1)if you do not want   to have the col names changing with a change in current view......put a NOEXPAND   for the TIme dimension in the expansion range(where you have SELF,DEP etc)
2)for the report part....use getonlyrange    to have it pulled from the DB instead of user entering data...
go to helpsite   for the exact usage of NOEXPAND and GetOnlyRange..play around enough...i'm sure you'll figure it out!!!!
hope it helps....

Drop Down list in BPC Input Schedule

Hi all,
In an input schedule I need to have some values "controlled", and allow to give a value only among a list of specific values. So I came up on the idea to builld it using cell "validation" feature of native Excel, just like I have been able to find in [this thread|Re: Regarding the Function.......] (by the way, great the hint about using name's ranges for being able to define the list in a different sheet than where it is being used).
So, I need to achieve one more thing. Let's say that the values I must include in the list are not numerical values, but alphanumerical, so I must combine in the schedule the alphanumerical value with the numerical value it represents. I have played around with excel and BPC formulas for quite a while already but cannot get it to work. Anybody has implented it?
Regards,
Rafael
PS: I get to define the drop down list of values in a cell and get it to write the corresponding numerical value in another cell referenced by a EvSND, but this only works in one direction (the cell does not get updated when I change the current view for example).

Hi Rafael,
I've done something similar.
In one cell I've put a drop down list, using Excel's data validation. The members in the list are human-readable text values, so the user can select one of these descriptive values.
In a second cell, these text values are transcoded into numeric values, thanks to function VLOOLUP. This cell is in the data range of an EvDRE expansion area, so when the user saves data the numeric value gets written to the back-end.
In a 3rd cell I fetch the numeric value currently saved on the server, via an EvGET.
In a 4th cell, I transcode that value into the corresponding text value, using another VLOOKUP function.
Finally, I've used function AFTER_REFRESH to read the content of the 4th cell, and set the value of the drop-down cell to that value. The VBA instruction to do the latter thing is something similar to:
ActiveCell.FormulaR1C1 = <the value of the 4th cell>
This way, the drop-down entry selected by default after refreshing data is the value currently stored on the server.
However I still miss something. I've set the Excel validation only in the 1st cell of the 1st row, and I want that the EvDRE expansion copies the validation to all other cells in all rows resulting from expansion. But this does not happen! Validation is not copied during expasion.
How's that? Everything else is copied--values, formats, formulas. Why validation is not copied?
* UPDATE
I've solved this issue. The solution is described here:
http://scn.sap.com/thread/3209213
Rafael Moreno wrote:
Hi Ethan,
yes, you are right, with VLOOKUP you get the information I want, but only in ONE direction. By "one direction" I mean that I can get in the cell with the VLOOKUP the text I want by reading a (numerical) value from a different referenced cell. But I would also need to be able of changing value in that same cell (by picking up one of those text values from a drop down list) and having the corresponding numerical value written on the referenced cell. Can you see the difference?
In few words, I would need a cell to read and write a value (just as the raw EvSND allows), but converting the numerical value into its corresponding text value.
Regards,
Rafael
Message was edited by: Davide Cavallari

Bpc input schedule does not show all data

Hello gurus, i have i question, a bout the following situation: i am using SAP BPC 7forNW , and i am creating an input schedule , it has account and entity, so i capture several values and then send data, and then appears a message , like this "all values were sent ,zero failed."
But, at the end, only a few of the sent values are shown, several of them disappear with no pattern, and in BI7 all of them appear correctly
What can i do in order to show all of the values that were caprtured in that input schedule?
Best regards

Hi,
The easiest thing you can do is that just remove some of the data from excel cell and "Refresh and expand" the Input schedule after you send the data to see whether you get the data correctly.
Sometime refresh more than once and see you get the data.
Optimise the application as well.
Hope it helps
Raman

BPC Input Schedule: DELETE button erase background color

Hi,
Can anyone help on the following problem:
I have an input schedule (either with nested rows or simple) and BPC by default marks all changed cells with red color. But when [DEL] button key is pressed in a cell all other marked cells on the same row loses their red color and became white again. It's undesirable behavior.
I've searched the forum and internet but nowhere this topic arise, maybe i'm doing something wrong. The one idea is to write a VBA macros which automatically recognize modified cells and then restores their previous backgrounds. Is there another solution?
Thank you!
Ivan

Hi,
When you create a report/input schedule using standard formating option system will generate with [multiple format|http://help.sap.com/saphelp_bpc75_nw/helpdata/en/87/2e5940a305405f957eb987daf30d5b/content.htm] .When you change the value it will turn to Red beacuse it defined under format range with criteria CHANGED and format with Red color. But system will not recognise DELETE as change. That is why if you want to delete a specific value you should make that value as 0 then only system will consider that as change other wise system would prompt you a message "There is no data to refresh".
I think you have to write your own macro if you really want to use DELETE function,instead of zerorise the values.
hope it helps...
regards,
Raju

BPC 7.5 Input Schedule in Excel 2010 - Expand time dimension dynamically

Hi BPC experts,
My project dimension has two properties, one for startdate and one for enddate of the underlying project. Example: Project XYZ, startdate: 2010.APR, enddate: 2011.JUN
In my input schedule I need the timespan to expand on month level from 2010.APR up until 2011.JUN. In this case it needs to expand 15 months where each month is displayed per column.
The issue is that all projects have different start and end dates and the expansion on month level needs to adjust accordingly. There is no maximum project time frame but if it helps I can live with a maximum expansion of for instance max 100 months.
I have another dimension for time with a hierarchy year - quarter - month (month being the basemember).
Every tipp highly appreciate!
Regards
Sven

Hi,
1) i use EvMBR for list values the CEBE necesaries.
2) Define ListBox by source list the EvMBR
Is necesary use Index() for get value the indice returned by Listbox when is selected the value.
3) Use EvGTS() linked to value getting by Index()
4) This is code in EvGTS:
=SI(EVGTS($N$11;1;"CEBE:CI1CA001";$N$14;"CUENTA:ZACB0001";$N$16;I28;"MONEDA_PPTO:USD";"PARAMETRO:NA";$N$20;$N$21;"SUCURSALES:NA";$M$27;$N$24)="#NODATA";"";EVGTS($N$11;1;"CEBE:CI1CA001";$N$14;"CUENTA:ZACB0001";$N$16;I28;"MONEDA_PPTO:USD";"PARAMETRO:NA";$N$20;$N$21;"SUCURSALES:NA";$M$27;$N$24))

Performance issues with SAP BPC 7.0/7.5 (SP06, 07, 08) NW

Hi Experts
There are some performance issues with SAP BPC 7.5/7.0 NW, users are saying they are not getting data or there are some issues while getting data from R/3 system or ECC 6.0. Then what things do I need to consider to check, such as what DataSources or Cubes I need to check? So, how to solve this issue?
What things I need to consider for SAP NW BI 7.0 u2013 SAP BPC 7.5 NW (SP06, 07, 08) Implementation?
Your help is greatly appreciated.
Regards,
Qadeer

Hi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv

Retrieve data from a report or database to an input schedule in BPC for exc

Hi,
I am using BPC for excel ( v 5.1).
I've created an Input Schedule(Input-1) using BPC for excel and sent data to the dB.
I need this (Input-1) data to use it in a new Input Schedule(Input-2), for further manipulation.
I need this data to be dumped in a sheet for further calculations in (Input-2).
How can i bring this data?
I created an input schedule(Input-2) and tried building an evdre in an excel macro to get it as a report of the 1st Input. But i was unsuccessful. I faced an error "ERR: Invaled KeyRange Header".
Am i thinking in the correct way? Do we 've any other options to retrieve this data?
Need your help to proceed....
(Pretty soon, the environment is going to be with version 7.0)

The macro i use to run when my workbook opens is as follows:
Private Sub Workbook_Open()
    ActiveWorkbook.Sheets.Add
    Sheets(Sheets.Count).Name = "Dump_Sheet"
    Sheets("Dump_Sheet").Range("a1") = "Application1"
    Sheets("Dump_Sheet").Range("a2") = "=EvDRE($A$1,A14:B20)"
    Application.Run ("MNU_eANALYZE_REFRESH")
End Sub
Also I 've tried this too:
Private Sub Workbook_Open()
    ActiveWorkbook.Sheets.Add
    Sheets(Sheets.Count).Name = "Dump_Sheet"
    Sheets("Dump_Sheet").Range("a1") = "=EvDRE(""Application1"",A14:B20)"
    Application.Run ("MNU_eANALYZE_REFRESH")
End Sub
Both of these gave me the same error code :
#ERR : Invalid KeyRange Header

SAP BPC NW- input schedule refresh issue

Similar Messages

Maybe you are looking for