SAP Business One 8.8Client throughs a .Dmp file

Hi Experts,
When we click Set Authorize Button in Report & Layout Manager ,SAP Business One 8.8Client throughs a .Dmp file Error and Closes Itself Immediately.
Then Also When we try To Open Reports Some times It Throughs The .Dmp File Error And Closes Immediately.
Please Help me to resolve this Problem As Soon.
Regards,
M.Senthilnathan .

Hi Mr.Gordon,
Our Patch Level is :12
SAP Business One 8.8 ,SP:000,
SAP Client Throughs the .dmp error in All our Client Systems.
And in server System too this error is coming and Closes itself Automatically.
We have Tried Cleaning Temp File Folders.
And We Have deleted the .Dmp files generated in Local Settingss\Application Data\SAP folder.
After Reports are opening normally .Again After Some times this .Dmp is created and Client Closes itself.
And We couldn't use Set Authorize In Report & Layout for Each Users.
Client always closes when we click Set Authorise in Report & layout Manager, by generating .dmp file in Local Settingss\Application Data\SAP folder.
Regards,
M.Senthilnathan

Similar Messages

Not able to install crystal reporter in SAP Business One PL 42

Hi All,
I had been using the evaluation version of crystal reports. Now when the free licensed version was launched I uninstalled the version and tried to instal the new one which I have downloaded from the portal. I have uninstalled the crystal reports runtime and the SAP crystal reports from the control panel. Now in the same process as mentioned I am installing the crystal reports again. In the ADD-ON istallation part when I am click on start the system shows the following error-
"An earlier version of crystal reports is found. Please ensure that the current installation is a higher version."
Inspite of the fact that my system showed no instance of crystal reports installed after the uninstall run by me.
Please guide me.
Edited by: debraj bhattacharyya on Nov 3, 2008 6:05 AM

The following is the Instructions Extract from "SAP_CRYSTAL_InstallInstructions.pdf":
Un-installation of previous version:
If a previous version of the Add-on exists , it is highly recommended the previous add-on be fully uninstalled before installing the new version. To uninstall the add-on, follow the 3 simple steps below.
1. Using SAP Business One Administration | Add-Ons | Add-On Administration: remove and un-register the add-on.
2. Log off SAP and Log back in for the un-installers to run.
3. Using Windows Control Panel | Add-Remove programs: uninstall the u201CSAP Business One Crystal Reportsu201D ( Do not un-install Crystal Run time )
Installation of New Version:
1.The Add-On runs using the compatibility licence of SAP Business One.
2.Copy the installation files to a suitable location.
3.The installation disk or folder will contain a file called SAPCrystalSetup.exe.
4.Log on to the target PC as an administrator or admin type user (windows).
5.Copy the SAPCrystalSetup.exe to a convenient location on the target PC and run SAPCrystalSetup.exe (confirm all overwrites - you may keep the CrystalDesignerPath.txt intact if the path specified is different to the defaults).
6.SAPCrystalSetup.exe will install the add-on components on the local PC. It is recommended that you keep the path selected by the installer. The default installation path for the Add-on files are C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR.
7.Locate the folder u201CDotNetFramework_3.5u201D , make sure the PC is connected to the internet and run the u201CdotNetFx35setup.exe u201C. An automatic download will occur, to get the suitable files for .Net Framework 3.5. This will take several minutes depending on the bandwidth. The installation of the .Net Framework will happen once the download finishes.
8.Locate the folder u201CCrystal_2008_Runtime_exeu201D and run the u201CCRRuntime_12_0_mlb.exeu201D. if a product ID is requested, leave the Text Box blank and proceed with install. This installs the Crystal Reports Runtime for Version 2008 on the local PC.
9.Once the setup.exe has completed, log on to SAP as manager or any other superuser.
10.Using Administration | Addons | Add-On Administration, register the Crystal Add-On, set the desired settings and restart SAP.
11.Log on to SAP, as a super user.
12.Run Account setup from Administration | Crystal Reports Administration | Account setup
13.Type in the sa password for the SQL server that holds SAP databases, and click Update. ( this process needs to be performed for each new PC, Once. )
14.Click the Create Ext tables button. Add-on will now create the additional tables (this process must be performed for each new SAP company once u2013 and can be performed from ANY PC). This creates the External SQL tables needed for the add-on.
15.THE TASKS 5, 6, 7, 8, 9, 12, 17 WILL NEED TO BE RUN ON ALL PCS THAT NEEDS THE CRSYTAL ADD-ON.
16.Crystal add-on is ready to use. A help file is provided and you may test the add-on with the sample reports found in u2026\ SAP_CR\SampleReports. The help file can be found in u2026\SAP_CR\Documents\UserHelpFile
17.If the Crystal Designer has been installed on the local PC, the following file needs to be edited ( or checked to be correct). The file gives the path to the Crystal Reports Designer exe. The add-on will read this file to launch Crystal Designer.
C:\Program Files\SAP\SAP Business One\AddOns\SAP_CR\Resources\CrystalDesignerPath.txt

Crystal Reports Dynamic Parameters with SAP Business One

Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One.
Let's start with the software versions:
- Crystal Reports 12.3.0.601
- SAP Business One 8.8 (8.80.231) SP: 00 PL: 13
- Windows XP SP3
(SBO Server on Windows 2003 and SQL 2005)
What I'm about to describe is something I've tried in several reports and for which I created a very, very simple test report to see if it was reproducible in a very simple situation.
- I connected to a Business One server through CR's SBO connection type. Logon is successful, tables are shown.
- I pick OCRD and plac CardCode and CardName in the details section on the report. Previewing the report shows data.
- I create a dynamic parameter on CardCode and in the Select Expert I select the CardCode field and define that that should be equal to the parameter.
- I preview the report again. Now it asks me in such a parameter screen for logon credentials. It shows the server and database it tries to connect to and in the username it shows the SQL Server username I used to connect to the SQL Server in the first place. However, the password for that user is not accepted. I also tried to login with the Windows administrator user and with the SBO manager user, but no success with any attempt.
I also tried to add a static parameter and add all database values to the list. Same screen, different result:
Crystal Reports 2008 wrote:
Logon Failed.
Error in File UNKNOWN.RPT:
Unable to connect: incorrect log on parameters. (rptcontrollers.dll)
(On a side note: the report is saved as report1.rpt)
Anyone else got similar issues and found a solution?

Hi,
When you have fixed your crystal installation following the note posted earlier, please take a look at the [how to guide|http://service.sap.com/sapidb/011000358700000882232009E.pdf] and also at the [e-learning|http://service.sap.com/sapidb/011000358700001370262010E] about SAP Business One 8.8 and Crystal Reports.
There are so called "tokens" which you need to use instead of dynamic parameters.
Dynamic paramters don't work in SAP Business One 8.8, if they are not defined as a static paramter with token.
Best regards,
Darius

Mobile Work-Station for SAP Business One

Hello Everyone
As I am aware that most of you have seen already various mobile solutions that integrate to SAP B1, Amodat Mobile Work-Station is currently the only solution that offers a complete mobile work-station for the four main field functions of SAP Business one: sales/van-sales, service, CRM and warehouse management on PDAs and laptops in on-line/off-line environment.
We refer to those solutions as workstations, since they provide a COMPLETE working functionality for corporate users in the field with features such as full order, collection and distribution management (including invoicing and supporting multiple price lists), on the go inventory management, service calls dispatch optimization tools, document attachments to accounts and activities, GPS location and much more.
Although we have numerous R/3 customers, our main focused is the SME market where we can offer robust solutions for a very reasonable price. Since 2001 we have implemented through our partners hundreds of projects ranging from 5 to over 500 users across Europe, North America and Australia.
I will be happy to provide more information on the solutions and set up live demo if anybody is interested.

Hi Jai,
I'll be happy to schedule a demo with you and your customer. I am not sure what is your time zone though and how to communicate directly with you. since we can not send email you could reach me through Linkedin Nir (Matan) Aharon. please add me to your contact list and let me know your email.
Best Regards,
Nir

SAP Business One on Ipad

Dear All,
I installed SAP Business One 8.81 PL04 (on Server) and SQL server 2005.
My questions are
1) i install B1 integration component, when i am opening the integration framework i am getting a windows security dialog box in which it is mentioned that "The server 127.0.0.0 at B1iP_dummy requires a user name and password.
Warning: The server is requesting that your user name and password be sent in the insecure mannar(basic authentication without a secure connection.
User Name :B1iadmin
Password:xxxxxx
Here my question is that if i provide username and password, Integration Solution for SAP Business One is opened but is not reflecting any data when i am clicking on SLD, Scnarios, Maintaining, Control Centre.......etc.
2) I want to connect to the server through the ipad.
I put the user as mobile user, i have given UDID number of Ipad, phone no of mobile user in SAP Business One.
I have given the server details like IP add: 000.000.000.000:8080 and kept SSL On and given DB Name as SBODemoIN and username as 'ABC'.
When i am entering the password it is reflecting me an error "an ssl error has occurred and a secure connection to the server cannot be made. [-1200]'.
I want to know where i have done the mistake.
Note: i tried by giving ip with B1 port number like : 000.000.000.000:30000 again its reflecting same error.
Can any body help me out.

Lets try to keep it together ...
1.) in SAP Business One you have to set the following settings for the user you want to connect with
a.) checkbox "mobile user" is checked
b.) mobile-number (must be digit by digit the same as you set it in the settings of the App)
c.) UDID of the iPad/iPhone (this is a 40 (!!!) digit alphanumerical number of the device)
ATTENTION - since SBO App. v.1.6.0, the UDID is no longer in use, now yo have to set the W-LAN MAC Adress here
d.) the User has a limited or a professional user license
e.) the user has a B1i licence
2.) settings in the iPad/iPhone App
a.) Server: IP Adress of the Bi1 Integration Server followed by :8443 (e.g.: 91.55.110.15:8443)
8080 is the http port (unsecure), while 8443 is the https port (secure)
b.) SSL: is on
c.) Company DB: the database Name of the company you wanted to connect to (and where you have made the user setting above) (e.g.: SBODemoIN)
d.) Usercocode: the log in name of the user you made the above settings for (e.g.: manager)
e.) Phonenumber: digit by digit the same as above 1.).b.)
f.) Demosystem: needless to say, this is Off
3.) network settings
a.) certainly the port 8443 must be available from outside the network
b.) VPN connection to the network must be possible
c.) the VPN connection setting has to be set in the iPad(iPhone
If this all is set and done,
1.) you first have to establish a VPN connection with your iPad/iPhone
2.) and now/than you should be able to connect to the company with the iPad/iPhone App
Hope this helps and make it e little bit clearer how this all works.
The SBO App is "nothing else" as an WebService-Call-Interface from the iPad/iPhone to the B1i Server. Every form/view you are filling in the App, is a WebService call/request to SAP Business One. To Send this WebService Request to the B1i Server, you first have to connect into the company network (via VPN) otherwise you call cannot reach the B1i Server ...
regards from Hamburg,
Heiko

SAP Business One v8.8 (PL12) - Upgrading

Hello Forum
this is my first post so apologies....
I am trying to establish a SAP B1 v8.8 test environment on a 'offline' server. I am encountering 2 issues when installing/upgrading...
Original environment:
         HP ProLiant Server
         5gb RAM
         Windows 2003 R2 Enterprise Server
         (Service Packed and Updated from Windows Update)
Firstly,
    SAP Server Tools / Server / Client will all install using a base of PL05, I can then upgrade this to PL10 (both of which were supplied by our Partner) - I operated on this PL level for a week or so with no trouble what so ever. Later I recieved PL12 on a disc from our Partner and went through the upgrade process from PL10 to PL12.
   This failed showing 'Creatordll.DLL' error straight away when the process started to upgrade the SBO-COMMON database. I could see the Server Tools get upgraded first and then the SBO-Common database getting backed up and as soon as this has completed the error happens. The upgrade then rolls back (Restores) the SBO-Common and then stops advising also that the Server Tools will need a manual restoration.
   MS Visual C++ 2005 Redistributable Package was the only reference that I could find on SDN so I followed the instructions here.
Amended environment:
         HP ProLiant Server
         5gb RAM
         Windows 2008 Enterprise Server
         (Updated from Windows Update)
Secondly,
   When attempting to troubleshoot this problem, the directory "C:\Program Files\SAP\SAP Business One Server " has only the B1_SHR available in Windows Explorer. When I check this against our LIVE environment using SAP B1 2007a the same directory has "B1_SHR \ DI API \ SAP Business One DI API \ B1iServer \ B1iSetup" listed.
When in the PL05 or PL10 environments SAP operates perfectly fine despite the fact that there is no other directories showing here. The base install and upgrade to PL10 completed without error so I had no need to investigate the SAP Business One directory until PL12 failed.
I'm hoping that someone in the Forums can help me out with these issues.
Thanks

Hi Garry,
I would suggest you to download the latest installation package on 8.8 PL10 which is available on the Service Market Place. In order to solve the issue with 'Creatordll.DLL' please follow the steps from the Note [1408662|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1408662]. Issue could be caused due to missing Microsoft ATL security patch.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

SAP BUSINESS ONE SHOWING ERROR IN WINDOWS 7

Hello Experts !!!
This is the configuration of my client's laptop
operating system : windows 7 ultimate.
system type : 32 bit operating system.
ram : 1 gb
processor : inter (r) U1400 @ 1.20 ghz
i have installed sap business one 2007 b patch level 19.
then i choose company , in server it shows MSSQL instead of MSSQL 2005.
i click on change server to select the approriate server .
but even though it throws me an error saying that
" INTERNAL ERROR ( -1002 )"
AND MY SERVER IS INSTALLED ON WINDOWS SERVER 2003.
M CONNECTING THE CLIENTS LAPTOP THROUGH LAN.
THANKS IN ADVANCE
Regards
A S Vamsi Krishna

Hi,
Please refer to this link, [click here|Re: SBO Client connection problem in Windows 7],
for SQL Native Driver download.
Regards,
Clint

SAP Business One System Requirement

Hi,
I have a client who is currently in SAP Business One 8.81 with PL 08.
There are 12 SAP Users and they have three active companies in SAP Business one, Two companies is integrated with Website , one company is using Zedit Ecommerce application and another is using Comgine ecommerce application. These two application create orders\invoice into SAP Business one which were placed through website.
Third company have the add-on which imports the EDI files and post invoices into SAP Business One. Each EDI file contains about 1000 invoices, all the thousand invoices get imports into SAP Business One in AR side as well as AP side (add-on create AP invoice and AR invoice). They also have add-on which create incoming payment for thousand of invoices.
Their current working process is one or two user imports the EDI file, one or two users makes payment other user correct the due date for the invoices or cancel and create new invoice(by creating credit memo) to correct error in invoice. On an average 6 users works at same time.
Company 1 and 2 work fine, but since more users are working on company three and EDI import and cash apply process continously using transaction tables two users always get clash, so sometimes we are receiving the deadlock error from SQL also many transactions are getting failed with different errors from SDK (these errors were related to SQL). I assume transaction getting failed because while one user is trying to create the invoice other user is accessing the same table. I see it always happen when SQL memory get above 70%.
Do any one have suggestion what is the recommended system configuration for this type of environment for both on client and server side? Do i need to host the SQL server in seperate machine and SAP server on different machine?
Client current system configuration is as follows.
SAP Business One 8.81 PL:08
Hardware Configuration of Server:-
Windows Edition : - Windows Server 2008 R2 Standard
Processor: Intel(R) Xenon(R) CPU E5645 @ 2.40 GHZ 2.39 GHz (4 Processors)
RAM : 12 GB
System Type : 64 - Bit Operating System
Your suggestion will be higly appreciated.
Regards,
Raja

Hi,
Are your users using one license at a time?.
I agree with idea to separate the 3rd company that using EDI import.
Create another Database server and restore the database. This will
allow faster transaction since database is already separated and add-on
consume much RAM.
With regards to your client you just change the Current Server from Choose Company log-on
and call the SQL server name.
You can separate you license and database server also.
Regards,
Clint

Cannot reinstall SAP Business One 32 Bit Client program

Hi Everyone,
I started with a computer which had SAP Business One Clients (32 & 64 Bit versions) installed, along with the DTW (Data Transfer Workbench). I have since uninstalled both Business One clients, and am now wanting to reinstall the 32 Bit Client (only).
When I double click on the Setup.exe file I am presented with the message below -
I don't understand why I am presented with this message given that I have uninstalled the software.
In addition to uninstalling the software through the Windows (7) Control Panel, I have also manually deleted all files and folders related to Business One (using a Windows Search), with the exception of those files related to the DTW, and finally deleted all TEMP files.
If I click on Cancel the setup stops, but if I click on OK I see the following -
When I click on OK, above, I see the following -
What can I do now to fully remove all traces of the previous Client installations so that I can reinstall the 32 Bit Client?
Any advice will be greatly appreciated.
Kind Regards,
David

Hi Everyone,
Firstly I now have an 'S-User ID', so I have access to SAP Resources.
Secondly, thank you Sridharan for posting the information to this thread, it is a great help (particularly given that I wasn't sure how long it would take my provider to organise an S-User ID).
Thirdly; these are the actions I have taken - none have helped!
Attempted installation in the 'hidden' Windows Administrator account
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
THE FOLLOWING COME FROM THE OFFICIAL SAP 'FIX' (as shown above in Sridharan's post)
1). Tried both points, a), and b), in the InstallShield link -
http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q108474&sliceId=1
However I could not proceed with point 3), because by my reckoning the SAP Business One Client that I am using relies upon Installshield 17 (and there is no link available for this version!).
If I am incorrect about the above can somebody please let me know which version of Installshield was used, and I will then return to point c) of the Installshield 'Q108474' link.
2). Microsoft C++ 2005 is not installed on the computer.
3). Registry entries did not exist, and I am going to assume where removed when I performed a registry clean with Registry Mechanic (before posting this thread).
I have downloaded a trial version of Installshield Enterprise, and I am hopeful that it will contain a version 17 driver file, in which case I will return to 'Q108474'.
In the meantime however if anybody has any further suggestions can you please post?
I really don't want to reinstall Windows just because one program will not load.
Kind Regards,
David

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One Client Not Install In Windows 7 Proffesional

HI Expert,
I Have Not Able To Install SAP Business One Client
Version : SAP Business One 8.8 (8.80.229) SP: 00 PL: 10
Windows 7 Proffesional
Error Massage : 1628
Best Regards,
Srujal Patel

Julie Jamieson
I Have Install SAP B1 on Right Click & Run as Administrator
Installation has been complete sucesfully
In Last When I Open SAP B1 Through Icon
Not Found SQL SERVER 2008 So Not Display Database Company List
Thanks
Srujal

Letter of Credit management in SAP Business one

Hi All,
One of our customer wants to manage the "Letter of Credit" used in exporting their product to different countries. They need to record it, discount it from bank, record bank charges and close it when their customer repays the amount. Also need to reconcile it through bank reconciliation. Is there any solution available (as an add-on or work around)?
Thanks and regards
Ajith G.

Hi Peter,
We are using India localization and the Bill of exchange is not available in that. But after reviewing the functionality, we found that it is a very good workaround solution for our customer. Now my question is whether this facility will be added for India localization in the next version of SAP Business One?
In addition to that we are discussing with another prospect who is actually doing cross-border trade. He is satisfied with all other aspects of Business one. Only problem is that he wants to generate all documentations related to his trade to be generated from Business one. Is this possible or any add-on available?
Regards
Ajith G
Edited by: Ajith G on Jun 29, 2009 12:04 PM

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

Integrating Java into SAP Business One Via DI Server and the B1WS

Hello Everyone
We are using the B1WS to call the Web Services from our web application. We are able to Generate the WSDL files using the Generator application and now wish to test the connection between our web server and the DI server However I am getting a 404 error from the web service endpoint in the WSDL files (/B1WS/Service.asmx)
I've created a login request from the WSDL which all seems sound, but it's still getting 404 errors when it tries to connect to the endpoint. I've passed the request through tcpmon so I can see the content of it, and the request looks good, but isn't getting any response. Is there any other SAP configuration that needs to be done to publish these services? I have read the Detailed B1WS Word Document and everything seems fine from that standpoint.
In hope, I've made the following configuration changes to the web services application, but am still getting a 404 error:
- Given the ASPNET user and the NETWORK SERIVCE group the required permissions for the SBODI_Server in DCOM configuration.
- Changed the virtual directory home of "B1WS" from
C:\Program Files\SAP\SAP Business One Web Services\B1WS\App_Code to
C:\Program Files\SAP\SAP Business One Web Services\B1WS
This directory has a web.config file, and has the bin files etc, but still seems to be missing a Service.asmx file (this missing , I don't know if that's all that's missing as I don't have any reference application to compare it to as I am using Java.
As usual your help is much appreciated.
Regards
Richard

Hello everyone,
I've had the same problem with the "missing" Service.asmx.
In my case, it helped to activate "Active Server Pages" and "ASP.NET" in the Web Services Configuration in the Internet Services Manager, which were both deactivated by default.
Maybe this can help you along.
Regards,
Andreas
Edited by: Andreas Mantel on Dec 17, 2008 4:51 PM

SAP Business One Development/Implementation

Hi all,
as I was searching through SAP site,
I am having trouble of finding the documents regarding SBO development/programming/implementation.
(I meant other than TB1300 or SDK)
Are there any documents provided by SAP officially?
Thanks, have a great day!

Hi Vinoth,
Please check below links.
https://training.sap.com/shop/certification/c_tb1200_90-sap-certified-application-associate--sap-business-one-90-g/
SAP Business One Certification Updates
SAP B1 9.0 Certification
SAP B1-Regarding certification
http://www.proprofs.com/quiz-school/story.php?title=sap-business-one-practice-exam
SAP BUSINESS ONE CERTIFICATION QUESTIONS
SAP Business One 2007 Certification Review Questions, Answers and Explanations
SAP Business One Certification Questions (TB1100) &laquo; Lanre Awojoodu Weblog
Hope this help
Regards::::
Atul Chakraborty

SAP Business One 8.8Client throughs a .Dmp file

Similar Messages

Maybe you are looking for