SAP Business One DI Event Client Examples

Hi all,
i wanna know if the examples of DI Event Service works with .net 2005 cause that show me an error on class VbClientSample in this part
Public Class VbClientSample
"'VbClientSample' is not CLS-compliant because it derives from 'ClientSampleBasicForm', which is not CLS-compliant"
Thanks in advance
Christian

Hi Christian,
I have just recompiled and run the VbClientSample with VS2005 and it works fine.
There are some compilation warnings regarding CLS compliance but no errors.
I will try to fix it for next version but you can use it without problem.
Regards
Trinidad.

Similar Messages

How to run SAP BUSINESS ONE 8.8 clients on windows and use MaxDB on linux/W

Good day,
As the subject shows we have SAP BUSINESS ONE 8.8 and I want to find out how to use it in combination with MaxDB instead of MS SQL. I find a lot of MaxDB stuff on the net but no guides on how to setup SAP BUSINESS ONE 8.8 clients on windows workstations and connect them to MaxDB.
Is this possible and if so how do I go about doing it ?
Any assistance is greatly appreciated .

Hi,
I suggest you to check the supported server for B1 in this link:
http://service.sap.com/smb/sbo/platforms
You will know the sap b1 supported platform.
If you really want to use maxDB on linux/W as B1 server, you can send a development request to SAP AG.
JimM

SAP Business One 32 Bit Client freezing when printing?

Hi Everyone,
I am experiencing an issue with printing on a SAP Business One 32 Bit Client. The client is installed onto a Windows 7 (x64) Professional computer, and the business I work for uses the version of Business One shown below -
The issue that is being experienced is as follows - assuming that an appropriate (printable) document is loaded, e.g.: a Delivery Note, then selecting File (menu) > Print:
20 second delay to 'load' the printer selection dialog, then after clicking on OK (to print)
30 second delay until 'paper is printed', during which time the SAP Business One User Interface freezes!
I have identified that this issue only occurs with SAP, e.g.: printing of Word documents, PDFs, emails, etc responds in the expected amount of time (and none of the a fore mentioned programs experiences any freezing with their User Interfaces).
In order to remedy this I first downloaded and installed the newest printer driver for the printer, however when no improvement was noticed I made the decision to uninstall and then re-install Business One. In doing so I followed the method outlined below -
Even after performing all of the above I have seen no improvement in printing or program responsiveness. If you have experienced this issue, and you know a fix can you please contribute to this forum thread?
Any help will be greatly appreciated.
Kind Regards,
David

Hi,
It is an application error. Refer SAP note 1955101 - CR_Printing Crystal reports and layouts is slow
Thanks & Regards,
Nagarajan

Cannot reinstall SAP Business One 32 Bit Client program

Hi Everyone,
I started with a computer which had SAP Business One Clients (32 & 64 Bit versions) installed, along with the DTW (Data Transfer Workbench). I have since uninstalled both Business One clients, and am now wanting to reinstall the 32 Bit Client (only).
When I double click on the Setup.exe file I am presented with the message below -
I don't understand why I am presented with this message given that I have uninstalled the software.
In addition to uninstalling the software through the Windows (7) Control Panel, I have also manually deleted all files and folders related to Business One (using a Windows Search), with the exception of those files related to the DTW, and finally deleted all TEMP files.
If I click on Cancel the setup stops, but if I click on OK I see the following -
When I click on OK, above, I see the following -
What can I do now to fully remove all traces of the previous Client installations so that I can reinstall the 32 Bit Client?
Any advice will be greatly appreciated.
Kind Regards,
David

Hi Everyone,
Firstly I now have an 'S-User ID', so I have access to SAP Resources.
Secondly, thank you Sridharan for posting the information to this thread, it is a great help (particularly given that I wasn't sure how long it would take my provider to organise an S-User ID).
Thirdly; these are the actions I have taken - none have helped!
Attempted installation in the 'hidden' Windows Administrator account
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
THE FOLLOWING COME FROM THE OFFICIAL SAP 'FIX' (as shown above in Sridharan's post)
1). Tried both points, a), and b), in the InstallShield link -
http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q108474&sliceId=1
However I could not proceed with point 3), because by my reckoning the SAP Business One Client that I am using relies upon Installshield 17 (and there is no link available for this version!).
If I am incorrect about the above can somebody please let me know which version of Installshield was used, and I will then return to point c) of the Installshield 'Q108474' link.
2). Microsoft C++ 2005 is not installed on the computer.
3). Registry entries did not exist, and I am going to assume where removed when I performed a registry clean with Registry Mechanic (before posting this thread).
I have downloaded a trial version of Installshield Enterprise, and I am hopeful that it will contain a version 17 driver file, in which case I will return to 'Q108474'.
In the meantime however if anybody has any further suggestions can you please post?
I really don't want to reinstall Windows just because one program will not load.
Kind Regards,
David

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

SAP Business One Client Not Install In Windows 7 Proffesional

HI Expert,
I Have Not Able To Install SAP Business One Client
Version : SAP Business One 8.8 (8.80.229) SP: 00 PL: 10
Windows 7 Proffesional
Error Massage : 1628
Best Regards,
Srujal Patel

Julie Jamieson
I Have Install SAP B1 on Right Click & Run as Administrator
Installation has been complete sucesfully
In Last When I Open SAP B1 Through Icon
Not Found SQL SERVER 2008 So Not Display Database Company List
Thanks
Srujal

Please wait while windows configures SAP Business One Client

Hi
I have just upgraded to SAP B1 8.8 PL16
All is fine apart from when I run vb 6 to compile some early programs of mine I get the following window which you can't seem to easily cancel
Please wait while windows configures SAP Business One Client
Can anyone suggest anything please ?
Thanks
Regards Andy

Hi,
You may check this: SAP 8.8 PL13 - Client keeps getting Configuring Client dialog box.
Have you searched the forum or web? There are quite a few discussions regarding the possibility for this.
Thanks,
Gordon

Installation error of SAP Business One Client after server disconnection

Hello,
While installing the SAP Business One Client to my laptop, the SAP server network connection accidentally interrupted and my installation breaks off. I did cancel the setup and try to remove the SAP Business One DI API using uninstaller. After removing the corrupted application I tried to run again the setup.exe from the server but I got this error:
Previous version of SAP Business One DI API uninstallation failed:
sapserver\B1_SHR\Client\SAP DIAPI Installation\setup.exe
SAP Business One Client installation will be aborted.
I also tried to remove the registry files using some registry cleaner but still I got the error.
Encountered something like this before? Need some help, thanks in advance!
Regards,
Ren

Hi All,
Sorry to re open this thread, but I am having a similar issue in attempting to upgrade a 2007 installation to 8.81.
When attempting the upgrade Server Tools, SDK, and even Client wont uninstall from either the upgrade process or manually from control panel.
I have conducted all the mentioned solutions as well as running registry cleaner all to no effect.
I have even attempted re installing the 2007 application but this returns a 1612 install shield error.
Any advice would be higher appreciated.
Matthew

Different language when installing SAP Business One client

Hello
I live in Mexico City and we are using SAP Business One in Latin american Spanish. When i install a new computer with the client of SBO, and i run it. I always get it in CZECH language and not in spanish like the server. Is there any way i can install the clients with the same language as the server???
Thanks
Jacobo

Hi there,
I am also having this problem. i have tried what you suggested (removing the LRF files except for the English UK one) But this did not resolve the problem. Did u ever manage to resolve this problem?
Greeshma

Cannot start widget - Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started

Dear Experts .
I'm trying to enable widget for my company db but getting the following error :
Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
I can connect to the B1iF locally and remotely .
I have the db configured in the SLD and connects successfully .
I have the event sender service and proxy started and configured for the company db.
I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
I've also tried to re-activate the xelcious from the B1iF->control.
My Setup :
I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
I'm using B1iF as even forwarder for B1iSN.
I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
I would appreciate any input before removing B1iF completely and re-installing.
Thanks in advance ,
Nadav.

Hi,
The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
Thanks,

Creation of Add-on package for 64 bit and 32 bit SAP Business One Client

Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
Please help because we are stuck in this issue and cannot move forward.
Thanks.

Hi Alejandro,
That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
Thanks

Remove or Hiding Marketing Documents from SAP Business One.

Hi Everyone,
Is there any way by which a marketing document in SAP Business One can be deleted or be hidden. For example in a Sales A/R module the the client does not want to use or also view the AR downpayment request or AR down payment invoice as it is not required for his business. What is the way to hide or remove it from the user point also during authorization.
I am also seeing that when in the user autorization I am giving full authorization for e.g in Purchase A/P Module - Purchase Order and Good Reciept PO only and when logging in by that assigned user I am only seeing the Purchase Order and Good Reciept PO that's absolutely fine but when I am going in Form Settings and and selecting visible for all the modules then all the marketing documents are coming back which should not come. Is there any way to block the form settings in this moment and when using the tab apply authorization in forms settings the defined authorized documents are comming but if one again clicks on form settings and make all the marketing document visible then again all the marketing documents are comming back which I don't want.
Please let me know your valuable comments in this regard.
Thanks and Regards

Kawish,
 To Hide the module from the User Main Menu

Login as that user and click Form settings and Uncheck Visible for the
Using Authorization > General > Document Settings (change this to No Authorization)
This would prevent the user access to Form Settings.
 To Disable access to a Module

Use Administration > System Initialization > Authorizations > Additional authorization creator. chose a name and in the Form ID area add the Form number. ( you can get the form number when you open the module and from the View menu enable system information, you can see the Forum number on the Task Bar)
Suda

SAP Business One Message Billing

One of our client is using MICROS POS system. We want to import the invoices to SAP business One 2007A using the format of Invoice provided in Data Transfer Workbench (after exporting Invoices from MICROS POS). We have tried the data transfer workbench for this purpose. We are at critical juncture.
We tried to input a .csv file to of Invoices in DTW, but it is showing an error after trying for several times. Please guide us on how we can import invoices at day end in SAP Business One, Please advise. Alternative suggestions would be welcomed as well.

Nasir,
Can you tell us what the error is that you are receiving as this would help direct you to a solution.
Also, there are samples of how to import invoices as well as other documents that come with the DTW. You may want to reference these for help also.
You can find this information by clicking Start > All Programs > SAP Business One > Data Migration > Templates and look at the Data Preperation examples.
Eddy

Capture keystroke from the SAP Business One Desktop

Does anyone know how I can capture a keystroke from the SAP Business One “Desktop” with the UI API?
Basically, open the B1 Client, then click the mouse in the back ground beside the main menu so that the cursor is “nowhere” (not in the search field). Now set some code In the KeyDown event to catch any keystrokes. Nothing happens. The event is not called. I even tried using SetWindowsHookEx API function but never got it to work with an SDK project since there is no form hHandle. Woudlnd even work once I gave the hhandle of the B1 Client

Hi Marc,
what is your exact requirement ?
I don't think you can specificly catch a key down in the background - but only because it is not possible to "lose" main menu as active form ( only if you close it -> then search field is active ).
So basically you have to find a logic where you can catch *your* keydown on any form.
Be aware of the fact, that keydown won't let you catch all keys / key combinations.
I had an equal requirement some time ago and after a lot of experimenting ( windows global hook wouldn't work reliable ) I ended up using SBO key shortcuts ( F2-F12 ) and their menu events.
regards,
Maik

Importing the (active) Fix Asset with ◦Accumulated ordinary depreciation to Sap Business One 9

Hi all,
I'm trying to upload the Active Fix Asset to the SBO (no new).
for example:
item:                          FixAsset
Useful life :                48 (month)
Remaining Life:        12 (month)
APC(Historical cost): 10000
Accumulated Ordinary Depr.: 7500
So Value Balance: 1500
and Life Balance :     12 month
I have tried to Import active ITEM by Excel ,follow this link : Importing Fixed Asset Master Data from Microsoft Excel - SAP Business One 9.0 - SAP Library
every time recieve the message :
Cannot import asset "fixasset"; a new asset's useful life and remaining life must be the same in depreciation area "AFA"

Hi,
Please check SAP note:
2001876 - The system does not consider the Salvage Value nor the
Remaining Book Value when you import assets
Thanks & Regards,
Nagarajan

SAP Business One DI Event Client Examples

Similar Messages

Maybe you are looking for