SAP Business One DI Proxy service terminated unexpectedly

Hi All,
DI Proxy service doesn't work correctly and it generate an entry in event viewer: SAP Business One DI Proxy service terminated unexpectedly. Does anyone know what can be the reason?
I checked diproxyserver.properties file and everything is ok. I tried to change di proxy server from name to IP and it didn't help.
DI Proxy is on the same server as SAP.
Kind Regards,
Szymon

Thank you all for your replies.
@Frank - your link doesn't work.
@Radosław - yes, I used netstat , that's how I checked if anything uses port 2099.
Fortunately I solved the problem. Though DI Proxy still terminate unexpectedly but not so often. The most important thing is the B1 DI connection test is successful.
I want to add that DB server is HANA. The solution was to change JCOPATH in diproxyserver.properties. I replace '\\' into '/'.
I wait a little and see if it really solved the issue, and let you know.
Kind Regards,
Szymon
FYI: Link fixed.
Message was edited by: Frank Moebius

Similar Messages

Cannot start widget - Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started

Dear Experts .
I'm trying to enable widget for my company db but getting the following error :
Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again
I can connect to the B1iF locally and remotely .
I have the db configured in the SLD and connects successfully .
I have the event sender service and proxy started and configured for the company db.
I can access the Dashboard web portal and login with database sap credentials (but I see nothing there)
I've checked that there are no duplicate entries in the SSLD table for SBO common (note : 1619422)
I've also tried to re-activate the xelcious from the B1iF->control.
My Setup :
I'm runing SBO server, B1iF installed locally and B1iSN installed on a 3rd party server.
I'm using B1iF as even forwarder for B1iSN.
I know this has been discussed many times through out the forum and I've tried most of the stuff other than clean install.
I would appreciate any input before removing B1iF completely and re-installing.
Thanks in advance ,
Nadav.

Hi,
The problem is SAP 8.81 PL04, with PL05 or PL06, it is solutioned.
Thanks,

Error when starting SAP Business One Integration Server Service

Hi all,
I have a very urgent problem when installing B1iSN:
I'm installing B1iSN2007 for a customer (Windows server2008R2, SBO 8.8.1),
and at the beginning of the installation, after instaling the technology, I have an error,
The Tomcat server can't start.
I get the following error:
Windows could not start the SAP Business One Integartion service on Local Computer. For more Information, review the system
event Log.If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 0.
In the event viewer I didn't find any more details.
In the tomcat logs (Under SAP Business One Integration\B1iServer\tomcat\logs) I find this:
[2012-01-05 15:12:26] [info] Procrun (2.0.4.0) started
[2012-01-05 15:12:26] [info] Service Tomcat5 name SAP Business One Integration Service
[2012-01-05 15:12:26] [info] Service Tomcat5 installed
[2012-01-05 15:12:26] [info] Procrun finished.
[2012-01-05 15:12:26] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:12:26] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:12:26] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:13:13] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:13:13] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:13:13] [1269 prunsrv.c] [error] ServiceStart returned 1
[2012-01-05 15:15:27] [174 javajni.c] [error] The specified module could not be found.
[2012-01-05 15:15:27] [994 prunsrv.c] [error] Failed creating java ..\..\..\jdk1.5.0_xx_sap\jre\bin\server\jvm.dll
[2012-01-05 15:15:27] [1269 prunsrv.c] [error] ServiceStart returned 1
What is the problem? How can I fix it?
Thanks a lot
Chana

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

SAP business one application messaging service

Tried to get mailer working but I am not sure if it s because of SAP business one messaging service is stuck in a starting mode.

Hi,
Yes. Messaging service should started automatically.
I think you need add your object name under Messaging service-->Right click-->Choose properties---Log on tab.. then this service starts automatically.
Thanks & Regards,
Nagarajan

Adding Invoices into SAP Business One via web service.

Hello!
I am partially done with my project. However, I am down to a couple of problems which hinders the progress of my project.
When I create an invoice with 2 items it will be inserted perfectly into the SAP Business One. However, when a second invoice with another 2 items is created the newly inserted invoice will reflect 4 items. 2 from the first invoice and the remaining 2 from the current invoice.
May I know what is the problem? I have been debugging for the past 2 nights and i couldn't find any headways.
Your help will be greatly appreciated.
Thank you!
Here are the codes:
                oCompany = Session("g_CompanyConnection")
                oDocument = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
                oDocument.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items
                oRecSet = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                oPay = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments)
                drOrdHeader = dtOrdHeader.Rows(0)
                'Set values to the fields
                oDocument.CardCode = drOrdHeader("CardCode")
                oDocument.HandWritten = SAPbobsCOM.BoYesNoEnum.tNO
                Dim j As Integer = 0
                Dim count As Integer = 0
                While dtOrdLines.Rows.Count > j
                    drOrdLines = dtOrdLines.Rows(j)
                    If count > 0 Then
                        oDocument.Lines.Add()
                    End If
                    'item lines - set value to the first line
                    oDocument.Lines.ItemCode = drOrdLines("ItemCode").ToString()
                    oDocument.Lines.Price = drOrdLines("Price").ToString()
                    oDocument.Lines.Quantity = drOrdLines("Quantity").ToString()
                    count = count + 1
                    j = j + 1
                End While
                lngRetVal = oDocument.Add

Thanks for your reply Li!
dtOrdLines was all along set as a local variable. Perhaps i should show the whole chuck of codes here.
Public Function CreateItemOrder(ByVal OrderDataSet As DataSet) As String
        Dim lngRetVal As Long
        Dim retVal As Long
        Dim strReturn As String = ""
        Dim strReturn1 As String = ""
        Dim oDocument As SAPbobsCOM.Documents = Nothing
        'Dim oUDF As SAPbobsCOM.UserFields
        Dim dtOrdHeader As DataTable = Nothing
        Dim dtOrdLines As DataTable = Nothing
        Dim dtPayment As DataTable = Nothing
        Dim drOrdHeader As DataRow
        Dim drOrdLines As DataRow
        Dim drPayment As DataRow
        Dim oCompany As SAPbobsCOM.Company
        Dim oRecSet As SAPbobsCOM.Recordset
        Dim oPay As SAPbobsCOM.Payments
        Dim IngRow As Long = 0
        Try
            SetConnectionParam("S10033973", "SBO_Innova", "manager", "manager", "sa", "P@ssw0rd")
            dtOrdHeader = OrderDataSet.Tables("OnlySalesInvoice")
            dtOrdLines = OrderDataSet.Tables("OnlyInvoiceItem")
            dtPayment = OrderDataSet.Tables("PaymentTerm")
            If ConnectToDatabase() Then
                oCompany = Session("g_CompanyConnection")
                oDocument = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
                oDocument.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items
                oRecSet = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                oPay = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments)
                drOrdHeader = dtOrdHeader.Rows(0)
                'Set values to the fields
                oDocument.CardCode = drOrdHeader("CardCode")
                'oDocument.DocDueDate = Today
                'oDocument.Address2 = drOrdHeader("ShipTo")
                'oDocument.Address = drOrdHeader("BillTo")
                'oDocument.DocDate = Today
                'oDocument.CardName = drOrdHeader("CardName").ToString()
                oDocument.HandWritten = SAPbobsCOM.BoYesNoEnum.tNO
                Dim j As Integer = 0
                Dim count As Integer = 0
                While dtOrdLines.Rows.Count > j
                    drOrdLines = dtOrdLines.Rows(j)
                    If count > 0 Then
                        oDocument.Lines.Add()
                    End If
                    'item lines - set value to the first line
                    oDocument.Lines.ItemCode = drOrdLines("ItemCode").ToString()
                    'oDocument.Lines.LineTotal = drOrdLines("LineTotal").ToString()
                    'oDocument.Lines.ItemDescription = drOrdLines("Desc").ToString()
                    oDocument.Lines.Price = drOrdLines("Price").ToString()
                    oDocument.Lines.Quantity = drOrdLines("Quantity").ToString()
                    count = count + 1
                    j = j + 1
                End While
                Dim k As Integer = 0
                Dim count1 As Integer = 0
                While dtPayment.Rows.Count > k
                    drPayment = dtPayment.Rows(k)
                    oPay.CardCode = drOrdHeader("CardCode")
                    oPay.CashSum = 0
                    oPay.TransferAccount = "161016"
                    oPay.TransferSum = 0
                    oPay.Checks.CheckSum = drPayment("Price") - drPayment("Change")
                    oPay.Checks.BankCode = drPayment("BankCode")
                    k = k + 1
                End While
                retVal = oPay.Add()
                If retVal = 0 Then
                    Session("g_LastErrorMsg") = " "
                    oCompany.GetNewObjectCode(strReturn1) 'get last doc
                Else
                    Session("g_LastErrorMsg") = oCompany.GetLastErrorDescription
                End If
                lngRetVal = oDocument.Add '<----- the same document is added here, here is where the document should actually be added
                'Check the result
                If lngRetVal = 0 Then
                    Session("g_LastErrorMsg") = " "
                    oCompany.GetNewObjectCode(strReturn) 'get last doc
                Else
                    Session("g_LastErrorMsg") = oCompany.GetLastErrorDescription
                End If
                oRecSet.DoQuery("UPDATE OINV Set ReceiptNum = " & strReturn1 & " Where DocEntry=" & strReturn)
                'oRecSet.DoQuery("UPDATE OINV SET PaidToDate = ")
                oRecSet.DoQuery("UPDATE OINV SET IsICT = 'Y' WHERE IsICT =" & strReturn)
            End If
        Catch ex As Exception
            Session("g_LastErrorMsg") = ex.Message
            strReturn = ex.Message.ToString()
        Finally
            oDocument = Nothing
        End Try
        Return strReturn
    End Function

Unable to connect to SAP business one through web service

Hi
I'm facing some problem with my web service. I tried to connect to SAP but it gave me an "System.Exception"
Public Function ConnectedToDatabase() As Boolean
Try
Dim oCompany as SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
sErrMsg = ""
Session("g_server") = System.Configuration.ConfigurationManager.AppSettings("Server")
Session("g_companyDB") = System.Configuration.ConfigurationManager.AppSettings("CompanyDB")
Session("g_DBUserName") = System.Configuration.ConfigurationManager.AppSettings("DbUsername")
Session("g_DBPassword") = System.Configuration.ConfigurationManager.AppSettings("DbPassword")
Session("g_Username") = System.Configuration.ConfigurationManager.AppSettings("Username")
Session("g_Password") = System.Configuration.ConfigurationManager.AppSettings("Password")
oCompany.Server = Session("g_server")
oCompany.CompanyDB = Session("g_companyDB")
oCompany.DbUserName = Session("g_DBUSerName")
oCompany.DbPassword = Session("g_DBPassword")
oCompany.UserName = Session("g_Username")
oCompany.Password = Session("g_Password")
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
lRetCode = oCompany.Connect()
When the codes runs to the line IRetCode = oCompany.Connect(), it will return an error code -8006. Those session got the correct information from the web.config. Then exception is throw in.
I try restarting my com and restarting my suite manager. Usually this will solve the problem. However, it won't for this time. I hope will receive some solutions for my problem. Thanks for your time.

Hi,
Try To Set the db server type to MS SQL 2005 (value 4)
oCompany.DbServerType = BoDataServerTypes.dst_MSSQL2005
or
oCompany.DbServerType = 4
and
oCompany.UseTrusted = False
Regards,
János

BACKUP desde SAP BUSINESS ONE

Hola amigos:
Alguien sabe como usar la herramienta de backups en el mismo SBO??
Sé que existe la posibilidad de hacer un copiado de mis base de datos al igual que el SQL, pero quisiera saber como?
Gracias x su ayuda
Christian

Hola...
Dentro de lo que es el Service Manager, existe una opción de Backup. A través de esta opción puedes fijar la periodicidad con la que quieres que se realice el respaldo. Su configuración es simple e instintiva, debes indicar lo siguiente:
Connection: Indicas los parametros de base de datos, nombre del servidor y usuario y contraseña.
Database: Indicas cual o cuales son las bases de datos a restaurar.
Settings: Indica las rutas en las cuales quedarán tus respaldos.
Shedule: Especifica cuando quieres que se ejecute el respaldo.
El Service Manager está ubicado en Programas > SAP Business One> Server Tools --> Service Manager.
Puedes probar realizando un primer respaldo y notarás que el proceso y la configuración son simples.
Espero te sea de ayuda.
Saludos Cordiales,

Iphone App for SAP Business One

Now that the Iphone APP is up on Itunes and it is foc to any client with 8.8 and a Professional User - does anybody have any information on how to get this working other than tick a box called Mobility... Then call your partner? We are the partner and we are looking at each other - all 22 of us! With customers calling now... HELP!

Dayal,
You can find all the answers and process here -
[SAP Business One Innovations|https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000700291&_SCENARIO=01100035870000000183&_ADDINC=&_OBJECT=011000358700000659192010E]
Richard Duffy

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

SBO_Backup Service is not Running In SAP Business one 8.8

Hi Experts,
Here We have Recently Upgraded from SAP Business one 2007 to SAP Business one 8.8.
Previously the SBO_Backup service In Server Tools was running proberly,
But after Upgrade the Backup service is not running .
Kindly Give us your value solutions..
Regards,
M.Senthilnathan

Hi,
I Am Using Windows Server 2003 Small business Server edition.
I have checked Ur solutions.
Am running Server tools in Administrator Login only with Full Permissions.
The License manager and DI server is running Only The SBO_Backup service is not Running!!!
Regards,
M.Senthilnathan

[HELP] About SAP Business one DB SET Sql Service Broker ==True ?

i coding in other project, need copy oitm data to project, so sql set service broker ==>true,
and use of ado.net sqlDependency to implement this function
but company db service broker is false. if i change true,will cause problems in sap business one data???
or other better solution to replicate sap data in real time???

Hi
I have 'Broker enabled' option set to True and SAP B1 works as usual so I presume that it's safe.
Kind regards,
Radek

Windows 2008 Server R2 & SAP Business One

Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2? We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine. All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005). The machine currently has 20GB of RAM.
What we are finding is:
1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed. So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions. While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart. There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window. Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services. My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
Regards,
Ross Unger
Third Wave Business Systems

I believe the supporting of this OS is still on Planned basis. You may check with SAP support to give them a good user case to fight with any non-compatible issues.
Thanks,
Gordon

Upgrading sap business one version 800232 is not allowed

Hi All
I got this error when I tried to run an upgrade from SBO 2007A PL 42 to SBO 8.8 PL3.
Any suggestions.
Regards
Bongani

Dear Bongani,
i found something for this Error i hope it help:
Zusammenfassung
Symptom
In the connection setting step or database selection step, the following error dialog appears: "Upgrade SAP Business One from version xxx is not allowed. Contact your SAP business partner for support."
Other terms
Upgrade Wizard, Upgrade Path, Restriction
Reason and Prerequisites
Application error
Due to the nature of development cycles, it takes some time for SAP Business One 8.8 to merge bug fixes from latest released install base patches. As a result, some upgrade paths are restricted in order to avoid data loss/duplicate upgrade in certain cases. For example: a bug fix is applied on 2007 A SP01 PL07 and merged with 8.8 PL05. If the database in 2007 A SP01 PL07 is upgraded to 8.8 PL04, the fix will be lost. In addition, there is a risk of data loss if the fix involves some metadata change. So 2007 A SP01 PL07 can only be merged with version 8.8 PL05 and higher.
Solution
SAP intends to provide a patch or patches in order to solve the problem described.
The section Reference to Related Notes below will list the specific patches once they become available. The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
Please note that these references can only be set at patch release date.
SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
In addition to the bug fixes listed in this SAP Note, this patch contains also the bug fixes from:
SAP Business One 2007 A SP01 PL06,
SAP Business One 2007 B SP00 PL14.
For more details, please see the SAP Notes under the "Related Notes" tab.
IMPORTANT: Please note that if you are on a higher patch than the 2007A/2007B patch levels listed above and upgrades to 8.8, this may result in unexpected issues and potential data loss as the upgrade path is not supported yet.
Best regards,
Indira

Error: No SAP Business one application is running

Hi
I got error "No SAP Business one application is running" when try to start our Add-on from SBO Client using remote desktop.
Problem Description: Add-on has been installed on server successfully. I want to access remote desktop of the client machine, and when login remotly to the client machine and open SBO client and start our addon from addon manager then it gives the above error.
If we dont access the client machine remotely and login to the client machine directly then addon connected well.
suggest me what to do to resolve this error.
Thanks...

Hi
I was just approached by someone else with such an issue...
We use Windows Terminal Services Client to access training systems - without issues.
Do you use sth like Citrix with load balancing?
There such issues might happen, but I don't have a real good idea what the issue might be in your case.
Maybe someone else has experienced the same problem - and resolved it?
regards,
Frank

Addon not loading - B1 Usability Package for all users in SAP Business One

Hello, I am a new admin to SAP B1 and am about to go live in a few weeks. We are running SAP Business One v. 8.80.227.
Envirorment details: Dedicated server for SAP database, and Terminal Server for remote connections.
I have a demo group of users in Active Directory that have permission to Remote Desktop to the TS and load SAP. For now, theses users are local admins on the TS. ( Permissions to be revised once addon issues are worked out ). I am the companies tech, and we have a SAP implementation company leading the project development.
Currently the addons that we are running are CRSB1Addon SAP 8.8 and B1UP from boyumit.
For one of the users in the Active Directory Security Group all the addon's work great. However the other users get the error below;
When logging in the system message window shows the following:
Failed to assign SAP Business One user license to SAP Add-ons. The Add on is configured to automatically load on startup, yet once I get the error, I open the Add on Manager and I don't see the B1UP in either tab at all.
The error on the TS in the log is here:
Log Name:      Application
Source:        Application Error
Date:          18/03/2010 10:55:25 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OVCL-TS.laurieroptical.local
Description:
Faulting application SAP Business One.exe, version 8.80.227.0, time stamp 0x4b8fadd4, faulting module ole32.dll, version 6.0.6002.18005, time stamp 0x49e037d7, exception code 0xc0000005, fault offset 0x000472da, process id 0x1f14, application start time 0x01cac6a4a2da01c9.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-18T14:55:25.000Z" />
    <EventRecordID>3778</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OVCL-TS.laurieroptical.local</Computer>
    <Security />
</System>
<EventData>
    <Data>SAP Business One.exe</Data>
    <Data>8.80.227.0</Data>
    <Data>4b8fadd4</Data>
    <Data>ole32.dll</Data>
    <Data>6.0.6002.18005</Data>
    <Data>49e037d7</Data>
    <Data>c0000005</Data>
    <Data>000472da</Data>
    <Data>1f14</Data>
    <Data>01cac6a4a2da01c9</Data>
</EventData>
</Event>
Any comments would be greatly appreciated.
Thanks
Edited by: dontforgetken on Mar 18, 2010 4:05 PM

hello Ken - Boyum IT has its own License Administration - path of Administration > Add Ons > B1 Usability Package > License Administration...
Do all of the users have a checkmark to give them access???
When a user has only the Main Menu window open, select the "Form Settings" icon and follow the same path on the Form Settings window that is diplayed and make sure they have checkmarks next to the B1 Usability Package to be "Visible".
Are all of the user set to display Boyum IT on their machines???
LOL - I am not technical so I have no idea what that other stuff means...
Hope that helps...
Zal

SAP Business One DI Proxy service terminated unexpectedly

Similar Messages

Maybe you are looking for