SAP BusinessObject Enterprise Versions support expiry info required
Dear All,
I am looking for SAP BusinessObject Enterprise all versions information and its expiry date.
Also just a query that, are below given softwares comes under or components of SAP BusinessOBject Enterprise?
1.Crystal Report
2.Crystal server
3.BusinessObject Web Intelligence
Please help me on it.
This is quite urgent, your help really very valuable to me.
Thanks,
Silambarasan.
Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh
Similar Messages
-
Hardware Requirements - SAP BusinessObjects Enterprise Integration Kit
Experts,
We are going to prototype Xcelsius and Analysis on SAP BI data. For this reason we are going to implement the SAP BusinessObjects Enterprise Integration Kit. As in we are getting a trial version from SAP. We have built a SAP BI Client 7 with ehancement pack 1 SP6 on a AIX server.
Do you know whether we need addiotional hardware to install the BO software. I presume one needs an application server of some sort? What is best practice in this, machine wise, operating system etc?
Though there is a lot of documentation availbale on the web, I cant find a simple server architecture.
I am useing the following documents as a guide, it says BO 3.0 but also relevant for 3.1 I presume?
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f?quicklink=index&overridelayout=true
It would be great if you could answer the questions above! Cheers.
Thanks, GruttePierHi,
the portal runs on a server. What is wrong? I have done everything exactly as documented.
Regards
J.V.
Edited by: Jana VOGL on Nov 11, 2010 8:13 AM -
Microsoft SQL Server 2008 Express for SAP BusinessObjects Enterprise 4.0
Hi Expert,
I'm going to install SAP BusinessObjects Enterprise 4.0 on my virtualized system (vmware) composed as: windows server 2008 Enterprise Edition R2 + Tomcat. I have some doubts related to the DB version to choose.
Due to the fact that Microsoft SQL Server 2008 Express is bundled with SAP BOE 4.0 I want to use this DB.
However, I saw in the Microsoft Portal that Microsoft SQL Server 2008 Express (http://www.microsoft.com/sqlserver/en/us/product-info/compare.aspx) that:
Number of CPUs 1
Maximum memory utilized 1 GB
Maximum database size 10 GB
These my doubts:
1) Could these characteristics generate performance issues for a production environment?
2) Which is a typical DB size for a production enviroment? could be greater then 10 GB?
3) Can I use Microsoft SQL Server 2008 Express in a virtualized system (vmware)?
Thanks in advance for collabortion
regards
gio'Hi Gio
Remember that the BOE system database (or repository) only has a few tables in it, with really one main table that stores a reference to each folder, report, user, group, server, etc. on the system. So the table and the database itself do not grow very large. In the past year, we have done over 70 SAP BusinessObjects projects and I can't recall one where the database size would even approach 5GB in total, let alone 10GB.
The reason for this is that the database only stores a reference to the physical objects and content within BOE-- the actual reports, universes, etc. are stored on the file system within the Input and Output file repository folders.
And the memory constraints are not really an issue either with BOE-- the database itself does not come under much strain during the day-to-day operation of the server. If you believe that the memory may be an issue, you can always start with SQL Server 2008 Express and then using the new tools in the 4.0 CMC to monitor the memory usage on the server. If you need to, you can move the system database to another SQL Server edition, or alternately move the database to another one of the supported platforms, including Oracle, DB2, etc.
Hope this helps!
regards
David -
Error: There was a problem logging on to SAP BusinessObjects Enterprise
I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
Unable to Logon
There was a problem logging on to SAP BusinessObjects Enterprise.
Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent. -
New monitoring tool for SAP BusinessObjects Enterprise XI 3.1 SP2 & higher
Did you know that there is a new monitoring tool available for SAP BusinessObjects Enterprise XI 3.1?
It produces reports that summarise the SAP BusinessObjects Enterprise system landscape and its configuration, helps out with troubleshooting issues and points out areas of concern.
It also delivers a lot of help with troubleshooting issues via Wily Introscope monitoring dashboards, an 'investigator' and transaction tracing.
You can read more about it in this blog: /people/miles.escow/blog/2010/12/01/remote-support-component
Edited by: Christian Luehe on Dec 2, 2010 5:07 PMHi,
we support official IBM Tivoli and Mircosoft SMS.
Check google with "businessobjects enterprise monitoring" and you will find a lot of other vendors. maybe you find yours.
Regards
-Seb. -
In PAS tool, when creating a new LinkId, in the drop-down choice with database types there is an option to choose "SAP BusinessObjects Enterprise". What does it mean to have such a source?
If I choose this option, will I be able to refer to SAP BusinessObjects universe objects? Or how this is different from typical dabase as source?Hi, the BOE LinkID option is no longer supported in SSM 10 and 10.1. Please refer to SAP note 2021613.
http://service.sap.com/sap/support/notes/2021613
Regards
Rodolfo -
SAP Netweaver ABAP version supports JAVA?
Hi all,
Im using SAP Netweaver ABAP sp12 version. Is this version supports JAVA applications to deploy on it?
With Regards,
SreehariHello Sree,
If u want your java applications to run in your system then you should have Java AS too. you can install Java AS as an Add-on installation and u can find a lot of materials for this thro sdn as well as help.sap.com
regards,
Anand -
Oracle Database 10g Enterprise version supported on Win 2003/Win 2008?
Hi,
The Current version of SAP we are using is SAP R/3 Enterprise 4.7 version (operating system- WINDOW NT )and the database is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 u2013 Prod
Please help to advice me:
Can currently running version of oracle database be supported on Win 2003/Win 2008?
Can SAP application support the existing oracle database server upgrade to Windows 2003/Win 2008?
Is it possible to have Oracle database separated to other server on SAP DEV and SAP QA?
Many thanks in advance.Hi,
You can get more clarity in the [Product Availability Matrix|http://service.sap.com/pam].
The following notes can help u better.
[Note 1383873 - Windows Server 2008 R2 Support|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1383873]
[Note 1303262 - Oracle on Windows Server 2008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1303262]
Hope this helps.
Regards,
Varadharajan M -
Changing the report header/footer in SAP BusinessObjects Enterprise X1 3.1
Hi ,
We have SAP BO 3.1. We have a requirement to change the header\footer of all the reports in the system.
I tried the option under Header/Footer Properties --> Appearance , Apply to all reports.
This option does change all the header\footer of all the tabs/pages within a report.
In our environment currently we have around 300 reports. We cannot edit individual report and make changes to the header/footer.
Is there any option through which i can change the header\footer of all the reports existing in the system?
Thanks in Advance
Regards,
Pavithra PHi Pavithra P,
Check the below links,
https://cw.sdn.sap.com/cw/ideas/1388
https://cw.sdn.sap.com/cw/ideas/5239
http://scn.sap.com/thread/2050054
http://evtechnologies.com/web-intelligence-4-0-default-paper-size/
http://devlibrary.businessobjects.com/businessobjectsxi/en/en/RE_SDK/resdk_dg_doc/doc/customizing_webintelligence_EN/ewucw_082.html
Regards,
Anish -
Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' with 64 bit SDK
I am running across an error that I do not fully understand when trying to get the SDK to work for 4.1 SP04. I have been trying to get this solution for a while now. I am able to run the SDK functionality with the 32 bit version without an issues however, my client would like to run the 64 bit version to align with their architecture. I have added the x64 DLLs to my project in VS2013, and compiled and built the project as a 64 bit project. I am receiving the following error message:
Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' or one of its dependencies. An attempt was made to load a program with an incorrect format.
When building the project to build on "Any CPU" instead of x64 or x86, I am seeing the following messages:
Warning 1 There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "BusinessObjects.Enterprise.Sdk, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=AMD64", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. DemoWeb2
Warning 2 There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.Framework, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. DemoWeb2
Warning 3 There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.InfoStore, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. DemoWeb2
Warning 4 There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.PluginManager, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project. DemoWeb2
I have made sure that I am referencing the 64 bit sdk .dlls from C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\. I only have 64 bit installed as well. Are InfoStore, Framework, and PluginManager only x86?
Thanks!Hi Dustin
You do not need to be concerned if your app references 32 or 64 bit assemblies. VS being 32 bit, needs to reference 32 bit assemblies in order to compile correctly. Thus running the app from the VS IDE, you wil be using 32 bit assemblies. Using a compiled exe or a DLL, the app will use 32 bit or 64 bit assemblies depending on how the app was compiled and "bitness" of the OS.
E.g;; an app compiled as 32 bit will require 32 bit assemblies
An app compiled as 64 bit will run 64 bit assemblies - on 64 bit OS only.
An app compiled as "Any CPU", will run 32 b it or 64 bit assemblies, depending on the OS. On a 64 bit OS, the app will by definition use 64 bit assemblies (but it is up to you to deploy the 64 bit runtime - not the 32 bit runtime). On a 32 bit OS the app will use 32 bit assemblies.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
The difference SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite
Hi all,
Would you please explain what is the difference of SAP BusinessObjects BI Suite and SAP BusinessObjects EDGE BI Suite..?Key difference:
Edge BI Suite does not allow you to do clustering of nodes, but the BI Suite does. This flexibility is restricted in Edge - so it's a single server setup.
Both SAP BusinessObjects Edge BI and SAP BusinessObjects Enterprise share the same underlying platform and tools. The difference is that Edge BI is designed and priced for mid-sized organizations, and is therefore licensed differently.
SAP BusinessObjects Edge BI is licensed for both named-user licenses and concurrent access licenses (CAL). While named-user licenses are appropriate for users who are active in the system throughout most of the day, the concurrent access license provides an economical way to support casual system users. A single CAL license will typically support 5-10 users, depending on the type of usage they require.
While Enterprise (BI Suite) can be implemented for unlimited users across multiple servers and includes clustering and failover capabilities, Edge BI is restricted to a single server and a user count more appropriate for mid-sized organizations.
You can always upgrade to SAP BI Suite if requirement grows and easily migrate all of your BI content including users, groups, reports, dashboards and universes.
The decision now depends on your investment and the allocated budget. I hope this helps. -
RCA/KPIScript.jar SAP BusinessObjects XI 3.1
Hi,
We would like to set up for End-To-End Root Cause Analysis for SAP
BusinessObjects Enterprise XI 3.1. We have Solution Manager 7.0 EHP1
SP26 (Windows) and BOE XI3.1 SP3 installed (Windows). We have followed
as in End-to-End
Root Cause Analysis: System Landscape Setup Guide, available at:
https://websmp130.sap-ag.de/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=976054 . End-To-
End Analysis shows u201DNo Applicable Data Foundu201D. Looking through u201CTroubleshooting Guide End-To-End Workload
Analysisu201D and u201CEnd-To-End Diagnostics Trouble Shooting Guide missing
data in service session from BI/CCDB2u201D it seems as if Extractor FWK for
system BOD works for the system, extractors are scheduled and running
(green)/Screen copy in attachment. TA Listcube, Infocube 0SMD_PE2H for
Sysid: BOD shows data from today)/Screen copy in attachment. We too
have looked through Oss note Note 1357901 - RCA: Managed System Setup
for SAP BusinessObjects Enterprise.
SMDAgent at the BOE host has been installed, registreded and attached
successfully and the agent setup completes successfully BUT with a
warning: "
[Wilyhost Agent] Wilyhost Agent setup finished successfully with
limitations. Data of at least one action is not available in Enterprise
Manager(corpit43:6001).
[E2E RFC] The E2E Extractors were succesfully activated for
cphgit49/BOD/49 (cphgit49.ad1.danisco.com) (Platform Processing
Services, ADAPTIVE JOB SERVER, Crystal Report Server, INPUT FILE
REPOSITORY SERVER, Output File Repository Service, Central Management
Service, JOB SERVER)
[E2E RFC] The E2E Extractors Batchs were succesfully started for
cphgit49/BOD/49 (cphgit49.ad1.danisco.com).".
Looking at Extractor FWK Administration, extractor log for the BOE
system alle extractors seems to run successfully ( all green lights).
1626902 - Incomplete EarlyWatch Alert report due to SCRI extractor
timeout implemented (Validity: 30.01.2012 - active ).
Testing from RCA, Host Analysis, OS Command Console alle retreives-
/entries
except for DumpKPI's works fine ref. screen copy in attachment
For DumpKPI's we first had a timeout after 9 minutes ("default")
(SMDAagentApp log), then we followed up at timeout parameters and now
we do not get a timeout but the execution
seems to hang itself after some times and we
get the following error when trying to logon to BOE CMS or as error
message in SMDAgentApplication.log ...:"@CPHGIT49.ad1.danisco.com:6400,
kind cms which host
service null, are down or disabled".
SMDAgentApplication.log
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <?xml version="1.0" encoding="UTF-8"?>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <KPI>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <Error>All the servers with CMS
CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400,
kind cms which host service null, are down or disabled
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line </Error>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line </KPI>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line
Thanks in advance for any input for this issue.
HanneHi Diego,
Thanks a lot for your reply on this issue. The BOE is XI 3.1 SP3 HF2.
We have followed up as in the notes below.
Note 1357901 - RCA: Managed System Setup for SAP BusinessObjects Enterprise.
Note 1377938 - BOE extraction script for Solution Manager EhP1
In RCA, Host Analysis, OS Command Console commands as DumpServerAps, DumpServerJobserver, DumpServerCacheServer, DumpServerPageServer, DumpServerEventServer,
DumpServerFileServer, DumpServerWebiServer and DumpAlinXML return values ok, but when executing the command DumpKPIs it takes a long while and it then shows same output as seen in SMDAgentApplication.log "<Error>All the servers with CMS CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400, kind cms which host service null, are down or disabled" ref. below.
RCA, Agent Administration, Application Configuration, com.sap.smd.agent.application.remoteos settings,
ENV_HOST_BOE_CMS = CPHGIT49:6400
ENV_HOST_BOE_CMS_PWD = ****
ENV_HOST_BOE_CMS_USR = administrator
ENV_HOST_BOE_DIR = D:\Program Files\Business Objects\
SMDAgentApplication.log shows,
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <?xml version="1.0" encoding="UTF-8"?>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <KPI>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <Error>All the servers with CMS CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400, kind cms which host service null, are down or disabled
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line </Error>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line </KPI>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line
Hanne -
Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type
Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas BudrysDear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas -
Dynamic internal table in SAP 3.1I version
hi All,
i am new to this form and have the following question.
Currently i am working in SAP 3.1I version and i am required to create a dynamic internal table.
Basically the table name will be entered by the user on the selection screen and the dynamic internal table has to be of this type (entered by user on the selection screen).
Please let me know whether this is possible in 3.1I version and if its possible then how to achieve this.
Note: this requirement has to be done in 3.1I version hence OO concept (ie)
cl_alv_table_create=>create_dynamic_table doesn't work here.refer this demo code -
parameter p_table type tabname.
field-symbols <tab> type table.
field-symbols <tab1> type any.
types: begin of itab,
t_name type tabname,
t_ref type ref to data,
end of itab.
data itab1 type table of itab with non-unique key t_name.
perform fetch_data using p_table.
perform print_table using p_table.
*& Form fetch_data
text
-->P_P_TABLE text
FORM fetch_data USING P_TABLE1 type tabname.
data itab2 type itab.
itab2-t_name = p_table1.
create data itab2-t_ref type table of (itab2-t_name) .
assign itab2-t_ref->* to <tab>.
append itab2 to itab1.
select * from (p_table1) up to 25 rows into corresponding fields of table <tab>.
ENDFORM. " fetch_data
*& Form print_table
text
-->P_P_TABLE text
FORM print_table USING P_TABLE1 type tabname.
DATA t_ref1 TYPE REF TO data.
DATA itab2 TYPE itab.
FIELD-SYMBOLS <field> TYPE ANY.
READ TABLE itab1 INTO itab2 WITH KEY t_name = p_table1.
ASSIGN itab2-t_ref->* TO <tab>.
CREATE DATA t_ref1 LIKE LINE OF <tab>.
ASSIGN t_ref1->* TO <tab1>.
DO.
*READ TABLE <tab> ASSIGNING <tab1> INDEX 1.
READ TABLE <tab> ASSIGNING <tab1> INDEX SY-INDEX.
*WRITE:/ p_table1.
NEW-LINE.
IF sy-subrc <> 0.
EXIT.
ENDIF.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE <tab1> TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
WRITE: <field>,' '.
ENDDO.
ENDDO.
ENDFORM. " print_table -
Current Enterprise version suppporting JPA & EJB3.0
Hi -
Could someone please tell me which production version of Oracle Application Server, Enterprise version, supports JPA and EJB3.0 and Java 5?
We own an Enterprise license, but are only using the standalone 10.1.3.3 container for development and testing.
Thanks!!
JeffreyTry using:
em.createQuery("select book from BookBank book").getResultList();instead of
em.createQuery("from BookBank book ").getResultList();The "from Entity e" only works for the Hibernate query language not the JPA query language.
Also in your persistence.xml, define only one data-source: a jta-data-source or a non-jta-data-source.
Maybe you are looking for
-
Are SMS forwarding/Editing and Text Copy Paste functions supported in Firefox OS?
Could not find any options to forward SMS or edit text messages, neither could find any options to copy paste general text. Most importantly, in the number dial pad, the cursor can't be moved to the desired location to add digits. Am I wrong? If so h
-
App Store says I need 9 updates but the screen is blank (white)
-
There is a issue, Whenever user post a invoice against po, which gr is not posted then Invoice got blocked for payment. but it is only happning for external vendor, not for intercompany. I hv checked tolerence key BR is set 0% for upper and lower lim
-
How do I download an old version of PSE if I can't find my code?
I had an older version of PSE and my computer died. It was a downloaded version and I can not find documentation of the key code - it was probably on the computer that died..... I don't need an upgraded version I just need to reload the version I o
-
2.1 Autogenerate GROUP BY and anlaytic functions
I love the auto-generate group by feature, but I use analytic functions more frequently these days and that makes the feature a little less usable. Would it be possible for SQLDeveloper to remove a group by that is automatically added if when the OVE