SAP BusinessOne Upgrade in citrix environment
Hi experts ,
I ahave a question regarding upgrade in citrix environment
I have a client who is using 2007 and I am planning to upgrade to 8.8 . After server and client upgrade , do I need to publish the application or it will automatically replaces the old apllication (2007) to 8.8
At this point , application 2007 is published .
Please share your experience with me .
Thank you
Bishal
Hi Bishal,
When you say after server and client upgrade, do you mean all clients are upgraded?
Thanks,
Gordon
Similar Messages
-
SAP GUI 7.20 installation in Citrix environment
Dear colleagues,
does anybody, if there are some hints using the SAP GUI 7.20 in Citrix?
We've different installations of the SAP GUI; one installation szenario is local on the client workstations and one is on a citrix environment.
On the local installation, the SAP GUI 7.20 works fine so far, but in Citrix the menu looks strange.
Is it possible, that we need a different installation server because on the client we've Vista; on Citrix it's 2003 Server?
Thank your for any advice + best regards,
ClemensHi,
try to disable the signature theme (higher ressources are needed):
To do so, you define the following registry value (REG_DWORD):
HKEY_LOCAL_MACHINE\Software\SAP\General\Appearance\ShowShadowBorder (on 32-bit operating systems)
or
HKEY_LOCAL_MACHINE\Software\Wow6432Node\SAP\General\Appearance\ShowShadowBorder (on 64-bit operating systems)
and assign the value "0".
As a result, a solid frame is drawn around the SAP GUI window and the resources are preserved.
Please see note 138869 for further information.
Hope this helps.
Regards,
Jann -
Installing SAP Crystal Reports v 2011 in Citrix environment
Can SAP Crystal Reports v2011 run in a Citrix environment? Anyone have any issues installing? Running?
See this [Platforms |http://www.sdn.sap.com/irj/boc/support?rid=/webcontent/uuid/e01d4e05-6ea5-2c10-1bb6-a8904ca76411]link. Find the Supported Platforms for CR 2011. I believe we have supported Terminal Server and Citrix since CR XI R2.
I have seen issues with the latest C and TS versions though and the Citrix/MS forums should be searched for known issues.
Thank you
Don -
SAP Upgrade in Cluster Environment
Hi,
Need information regarding SAP upgrade in cluster environment(MSCS) like if any prerequisites need to be done.
and if any aditional steps to be performed compared to normal upgrade.
Thanks in advance.
Regards
Ramthe upgrade guide tells you what to do, read it throughly.
-
How to do patch upgradation in citrix server ?
Dear all,
How to do patch upgradation in citrix server (SAP B1 2005B PL41 to PL49) ?
Whether i also need to do same in db server ?
JeyakanthanHi Jayakanthan,
Patch Upgrade is done on SAP Server only.After Completion of Patch 49 upgrade in SAP Server
then open SAP B1 in server machine it start to upgrade DB after completed DB Upgrade
In Citrix Server open the SAP B1 it start the upgrade process after completed
restart the citrix server.
There is no separate Patch instalation in citrix server.
in Citrix server SAP client only installed so you can just open the
SAP B1 in citrix server and other client machine also it automatically start to
upgrade.
*Close the thread if issue solved.
Regards
Jambulingam.P -
Can we run InDesign CS6 on a citrix environment?
We are now working with InDesign CS4 on a Citrix environment and we would like to upgrade to InDesign CS6. Will this work? What version of Citrix is best used?
Yes is the quick answer to the question. This is pretty common in large organizations for design departments or knowledge workers that need access to Creative Suite applications. Although most of the links and documents is on CS5, I have not heard about problems in CS6. InDesign does not require OpenGL hardware acceleration.
Here are some links on the Adobe web site:
http://www.adobe.com/devnet/indesign/documentation.html#citrix
http://www.adobe.com/content/dam/Adobe/en/devnet/indesign/pdfs/indesign_cs5_citrix_support _document.pdf
(unfortunate typo in Adobe's document title)
The Citrix Ready Community Verified site also has customer comments on how to run InDesign on XenApp 6.x.
http://forums.citrix.com/thread.jspa?threadID=303877
Judging from the number of votes (11) on http://community.citrix.com/citrixready/product/adobe+indesign+cs4+v6+0, there are numerous companies doing this, both on XenApp and XenDesktop, however it is hard to track who does what in our installed base.
Hope this helps. -
Deploy add ons in a citrix environment
I have a citrix environment with 1500 users and I would like to deploy a number of firefox "add on's" without needing end user interaction. How can this be accomplished?
Looked at regressing to earlier versions of Firefox that supported global installation of add on's and then upgrading as well as copying the directories added and replicating registry updates, with no success.
Looking at whether it's possible to push out add on's via the login script.
Any help much appreciated. -
dear friends,
can any one explain me how to do SAP VERSION upgrade in real time work environment?
points will be awarded.
Cheers
Troy.Hello Troy,
I assume you meant the general SAP upgrades, depending on which sap upgrade, but most of the sap upgrade in real time work environment which should allow you to choose between two upgrade strategies. The downtime-minimized strategy enables you to run the production system and shadow system in parallel. This requires extra system resources, but reduces downtime.
The resource-minimized strategy enables you to run either the production system or the shadow system. This strategy requires no extra system resources. However, the downtime is longer, since you can only run the shadow instance during downtime.
I hope this is what you asked for, if you found them useful do award some points.
Thanks,
George -
Livecache patch upgrade in MSCS environment
Hello everyone,
I have installed livecache 7.7.02 BUILD 008-123-149-275 in MSCS and planning to upgrade the patch level to KERNEL 7.7.04 BUILD 029-123-196-543.
My installation type is,
Independent Programs directory - local hard disk
Independent Data Directory - distributed disk
Instance Dependent directory - local hard disk
So note Note 508979 - Upgrade of SAP DB/MaxDB/liveCache w/ Cluster MSCS Var.1 applies in my case.
However, need help in understanding one section of this note,
Points 14 and 15 talk about notes on how to run SDBUPD, however do not specify whether SDBUPD is to be run on node B. After manually copying the files to node B, as described in the note, do we still need to run upgrade (SDBUPD) on node 2 ?
Also, It would be great to have some more reading on Livecache upgrades in MSCS environment.
Thanks in advance.
Regards,
KiranHello Ivan,
Thanks for the reply.
I started upgrading livecache patch as per note 508979. Completed the patch upgrade node 1 using SDBINST. Completed all the steps till step 13. On step 14, I started SDBUPD on node B.
At this stage I get following message on command prompt,
Install>SDBUPD -d MLP -u control,<password>
SAP liveCache INSTANCE UPDATE
starting installation We, Jun 10, 2009 at 14:59:10
operating system: Windows AMD64 NT 5.2 Service Pack 2
callers working directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-
win-64bit-x86_64-7_7_04_29
installer directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-win-64
bit-x86_64-7_7_04_29
archive directory: C:/Dumps/Latest_Livecache_Kernel/lca600018_livecache-win-64bi
t-x86_64-7_7_04_29
beginning to check sap db instances
start new instance update
The installation remains stuck after this message.
I ensured xserver and sap instance were stopped before installation. Tried rebooting the server (Node B), but same result.
Pls can you suggest something on this.
Regards,
Kiran -
Execution of Reports phase error during SAP EHP4 upgrade with EHPi
I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
VictorHi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard -
How to Add shortCut key to button or form In SAP BusinessOne
Hi
How to assign short Cut key to button or form ,in SAP BusinessOne using VB.net.
Thanks,
Y.
Edited by: Yughandar on Mar 10, 2011 9:32 PMHi
To set shortcut key for button , try this
in your srf change the button caption like this
caption="&Del line"
this will set shortcut key (Alt+d) for the button
Regards
Arun -
Consuming web service in SAP NetWeaver 7.1 Composition Environment
Hi,
I have created webservice in ABAP. can anyone help me out how to consume that in SAP NetWeaver 7.1 Composition Environment.
Thanks in advance.
Dhanu.Hi Dhanu,
There are several ways of doing this:
1) Publish your web service onto the Services Registry. If you are using CE 7.1 EHP1, you could refer to my blog for this: /people/romit.ghose2/blog/2008/11/21/using-a-simple-ui-to-publish-web-services-to-the-services-registry-in-ce-711
If you are using a previous release, you would have to use the web services available for publishing.
2) Directly enter the WSDL path and create a consumer proxy for it in NWDS.
Hope this helps.
Regards,
Romit -
SAP AFS Upgrade from version 5.0 to 6.4
Hi Experts,
I wanted to know if someone here was familiar with the SAP AFS upgrade from 5.0 to 6.4. I wanted to know how exactly they improved the areas listed below. (obtained from SAP Course). Your help would be greatly appreciated
http://www.sap.com/services/education/catalog/globaltabbedcourse.epx?context=%5b%5b|wdedaf||1||de|%5d%5d|
1) Improvements in the areas of planned independent requirements, seasonal concept, value add services, Combined order, productionu2013 warehouse interface
2) Production Planning Basic Data - Enhancements of AFS Bill of Material (AFS BOM), SKU Group Based Routing
3) Manufacturing Execution u2013 Collective Planned Order Conversion, Combined Order Confirmations
4) Batch Determination/Classification for SAP Apparel and Footwear
5) Handling Unit Management for AFS
Thanks,Hi Ronny,
Thanks for the reply!
These patches you speak of, is it for the types of issues I mentioned in my first post or do they cover the entire AFS functionality? I assume it still requires complex configurations but are there a lot of complications with going from AFS 5.0 to 6.4, compared to a new AFS 6.4 implementation? Specifically with the grids, categories and BOMs?
/Cheers -
"Cannot open semaphore" in Citrix environment
Hi
I have a TUX running on a Citrix Server in NT box and is having the following
error in over and over again.
TRACE:at: { tpreturn(2, 0, 0x14ff8f0, 100000, 0x0)
TUXNT_CAT:2: ERROR: Cannot open semaphore 'IPC651': The system cannot find the
file specified.
ELINKSBLETOA.632: TRACE:at: } tpreturn [long jump]
I have tried both rebooting the server and re-installing TUX, doesn't help. I
am suspecting that this is because of the nature of Citrix, where TUX is confused
with which client it is connecting to. Does anyone have any similar experience?
Any help would be appreciated.
Regards
Nathan
Citrix is a emulator kind of software which create a new session for every client
that connects to it. All applications are run on the server box only. Very much
like a graphical version of telnet.Hi Manoj,
Thanks for your response. Well, even through I am not 100% sure, I am fairly confidence
that TUX does like Citrix architecture after a series of testing. Here is my theory,
while it remains okay to have TUX client in Citrix environment, TUX server is
confused with the session architecture in Citrix. While TUX is "routing" "some"
of the requests and messages, it looks for a semapore that is handled by Citrix
(and might have destroyed?). And thus it fails.
Of course... its just my guess work. =P
Thanks again
Regards
Nathan Lau
"Manoj SASIDHARAN" <[email protected]> wrote:
>
Hello Nathan,
I have tried using VB applications that r Tuxedo clients on Citrix MetaFrame
server.
And they worked fine.
Really not sure whether u can run Tuxedo servers on Citrix.
Do u have a sound reason to run Tuxedo servers run on the Citrix box???
regards
MS
"Nathan" <[email protected]> wrote:
Hi
I have a TUX running on a Citrix Server in NT box and is having thefollowing
error in over and over again.
TRACE:at: { tpreturn(2, 0, 0x14ff8f0, 100000, 0x0)
TUXNT_CAT:2: ERROR: Cannot open semaphore 'IPC651': The system cannot
find the
file specified.
ELINKSBLETOA.632: TRACE:at: } tpreturn [long jump]
I have tried both rebooting the server and re-installing TUX, doesn't
help. I
am suspecting that this is because of the nature of Citrix, where TUX
is confused
with which client it is connecting to. Does anyone have any similarexperience?
Any help would be appreciated.
Regards
Nathan
Citrix is a emulator kind of software which create a new session for
every client
that connects to it. All applications are run on the server box only.
Very much
like a graphical version of telnet. -
Advanced setting for all users in a Citrix environment
I would like to disable the Advanced option "Allow editing directly in cells" for Excel 2010. It is used in a Xenapp (Citrix ) environment using upm or roaming profiles. How can i avoid having each user make this setting wich is then
saved to his profile?
is there a registry change that will set it as the default when anyone launches excel?
Thank You.Hi,
Please try to use disabe the "Allow editing directly in cells" in GPO.
Press win+Run> gpedit.msc>Adminstrative Templates>Microsoft Excel 2010>Excel options>Advanced>Edit directly in cells>disable
Then we could update the GPO.
More reference:
Edit directly in cell
Registry Key: software\policies\microsoft\office\14.0\excel\options\binaryoptions fNoInCell_66_1 0 | 1
This policy setting sets the ''Edit directly in cell'' option found under File tab | Options | Advanced | Editing Options.\n \n If you enable or do not configure this policy setting, Excel will allow editing directly in the cell This is the default
behavior.\n \n If you disable this policy setting, Excel will not allow editing to be done directly in the cell.
http://www.microsoft.com/en-us/download/confirmation.aspx?id=18968#
http://technet.microsoft.com/en-us/library/cc739112(v=ws.10).aspx
Regards,
George Zhao
TechNet Community Support
Maybe you are looking for
-
How to change the numbers of items in a ring control in run time ?
Hi ! I would like change the numbers of items in a ring control in run time, but I can´t. Thanks.
-
Parked Invoice amount wrongly stated
Hi, I have one problem here with the amount of parked invoice. When I check at tcode MIR4, the amount stated as 1079.05. But, when I click the related PO# and go to purchase order history tab,amount for parked invoice stated as 0 (zero). Kindly, plea
-
Task Pending Changing Email to Current Task:Assigned To
I have followed the directions to modify the approval email users get to approve a request I have built a workflow for. But, when I try to publish it in Designer, I get the following error. Workflow from update required The form *.xsn has been custo
-
Photoshop CS2 (Mac) bricht bereits beim Starten ab
Hallo, arbeite mit CS2 (Mac). Photoshop bricht seit Kurzem bereits beim Starten ab. Auch Neuinstallation hat nichts gebracht. Adobe konnte mir "nur" mit einer englischsprachigen Anweisung zur Fehlerbehebung aushelfen mit der ich, sprachlich bedingt,
-
I just started my subscription yesterday and I've been having a similar problem as to others where the app section of the CC desktop app has a continuous spinning wheel. I've tried basically all the solutions (uninstall, reinstall, removing folders