SAP BW 640-----SAINT HANGS AFTER CLICKING START

Hi Everybody,
We are on stack 9 on the source BW 640. I am trying to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353. Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
We have extracted the appropriate installation packages for the above components. When we run SAINT to install these components, and click START it just hangs. It does not take me to the next window.
At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004. I also have the latest version of R3Trans, and tp. SAINT still hangs after clicking start button. No logs are getting generated in \usr\sap\trans\log. No files are getting generated in \usr\sap\trans\tmp.
I restored the database to what it was before we initiated the SAINT process. Still SAINT hangs after clicking start button.
In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool). Likewise in SAINT-utilities-check-transport tool----every thing looks good.
Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155).
Any input is greatly appreciated.
Thank you.
Ramesh Srinivasan.

Thank you so very,very much. We are currently using a 640 gui. We tested with 710 gui and saint after clicking start does not hang.
So we are assuming that 710 gui will solve the problem.
Thanks once again. A very timely help. You bet I'll touch base with you if I run into issues.
RS

Similar Messages

DBCA hangs after clicking finish

Hi can anyone help me please.
dbca hange after clicking finish.oracle 10.2.0.1
dbca log below
[TaskScheduler timer] [18:3:23:529] [SQLEngine.initialize:-3] Starting Reader Thread...
[TaskScheduler timer] [18:3:23:550] [SQLEngine.initialize:-3] Waiting for m_bReaderStarted to be true
[TaskScheduler timer] [18:3:23:579] [SQLEngine.reInitialize:-3] Reinitializing SQLEngine...
[TaskScheduler timer] [18:3:23:591] [SQLEngine.initialize:-3] Execing SQLPLUS/SVRMGR process...
[AWT-EventQueue-0] [18:18:33:179] [StoragePage.validate:925] StoragePage: In validate function
[AWT-EventQueue-0] [18:18:33:186] [Verifier.validateTemplate:1629] StorageType == 0
[AWT-EventQueue-0] [18:18:34:760] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:18:36:271] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:19:40:238] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:21:55:717] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
please help

Hi;
Please check thread
Re: dbua - finish button hangs
Regard
Helios

AME CS6 hangs upon clicking "start"

Hello all,
Forgive me if this has been discussed previously. I have searched the forum and come up empty handed.
I am running OS X Snow Leopard with AME CS 6 and Premiere CS 6. I encounter problems when I try to queue files from Premiere, or even when I plain import them from finder. I choose my settings (often H. 264 / DV Widescreen 24p) and click start. The screen hangs with no motion and the "encoding" bar doesn't budge. Strangely, I can still cancel the job from within the program. It is not completely frozen.
This problem occurred after 48 hours successful use of the utility, and I changed nothing in the process. I have reinstalled AME and Premiere, and performed preference resetting by holding shift upon AME startup.
Can anyone else suggest a solution? Thank you so much.

Server-side user profiles, references to previously opened files on network volumes, all other network stuff you can imagine. AI is notoriously inept at most of that. Beyond that anything from color profiles, fonts, printers and other configuration stuff can have similar effects. Also you may need deal with that PDF stuff that Apple hide/ suppress on newer versions of OSX. Not a current Mac user, though, just throwing out recollections from things I've read here and there...
Mylenium

Start won't appear after clicking start button or win key on keyboard

It's happened after update to 9926. First start menu works properly but after reboot it broken-down. Right click works fine. Before reboot i disabled "Windows search" service but i don't think it related.

Start won't appear after clicking the start button or win key on keyboard on the second user account. It works fine on the administrator account. UAC changes have no effect. Re-booting has no effect. Build is 9926

SAINT hanging after EHP1 upgrade

Hi All,
one more issue i am seeing that, i am unable to run SAINT after EHP1 updagrade, i called SAINT tcode and when i click on START then its hanging,, please suggest on this.
thanks
Venkata

Hello Venkata, Have you executed SGEN post support pack upgrade ? if yes could you please do a quick check if some components and objects are still remaining which needs to be re-generated ?
Hope it helps.
Regards, Amber S
Infosys Technologies Limited.
Edited by: Amber S on Feb 23, 2010 10:41 AM

Z87-G45 hangs after clicking on OC Genie

For starters, I'm not IT techie guru, just a noob.
What happens is that after I click on the OC Genie button, the comp will hang as it boots up at the "STARTING WINDOWS" just before the 4 balls appear.
I hv set my comp to "OPTIMAL MODE" F6.
I used to have the Z77A-G43 & I just click on the OC Genie button & all was smooth.
Wonder why am I facing this issue now.
My setup
Intel i7-4770k 3.5ghz 8mb LGA1150
Z87-G45 Gaming mainboard
Windows7 Home Premium 64k
Corsair Vengeance 1600 16GB kit CL9 (2 x 8GB)
MSI GTX760 Twin Frozr Gaming 2GB GDDR5 PCI-E OC
Seasonic X-Series 750W Modular Gold PSU
Samsung 840 PRO SSD series
Appreciate if the experts here can help to guide me.
Tks & much appreciated

Quote from: Froggy Gremlin on 14-February-14, 13:45:50
Did you uncheck Auto Restart so as to get the BSOD error code? That will tell what was needed to correct it.
Yes sifu I did before I started the movie
Quote from: Froggy Gremlin on 14-February-14, 13:45:50
If the BIOS has the settting VDroop, set it to 100%. Also, enter the OC Section of the BIOS Sub Section 'CPU Features' and set all the power limits (w) to 255, Power Duration (s) to 60 or 128. Overspeed Protection set to disabled. Make sure EuP 2013 is disabled.
Ah~~~so~~~~~~ ok I will do this
Quote from: Bernhard on 14-February-14, 14:15:29
If ever you want to inspect any crashes, then do the following:3. Click on the Technical detail link and you will see something that is similar to this:
This will provide you with a host of information, including any error and BSOD codes which are needed to ascertain the cause of the crash.
Trust this can assist you in finding the data of the crashes that you have experienced.
Tks Bernhad for ur tips, now I go the reason for the crash
Description
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8010e32028, 0x00000000ba000000, 0x0000000052000402). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 021414-4009-01.
As I've mentioned in my initial post, I'm so noob at this I hv no idea wat the desc is talkin abt

System hang after clicking "Run" to launch "SBO_Welcome.hta"

Hi,
My client encounters a pop up window "Open File - Security Warning" upon logging into SAP.
It is a message to run "SBO_Welcome.hta" which is located on "
SERVER\B1_SHR\Help\EN".
When the "Run" button is clicked to launch the above mentioned file, the system will hang.
Also, the error below will be displayed when we force shut down the above pop up window from Task Manager.
Error:[NCM Main].[Main] The RPC server is unavailable. (Exception from HRESULT: 0x8007068A)
The above issue is encountered on a specific workstation only.
Kindly suggest if anyone knows how to resolve this.
Thank you.
Yadana

Hi,
Bala is correct. this installation is corrupt. Uninstall and install with Full administrator rights and doesr the use profile have acess to the shared folders like B1_SHR, check for the firewall setting .
Regards,
Rakesh N

JDev hangs after click on event-tab in MW

Hi all,
I have problem with definition an descriptor-event in MW in JDev 10.1.2:
When I define "tab" event on descriptor (none method selected yet), save and close JDev, after opening JDev and click on this "tab" event JDev hangs.
Only Ctrl+Alt+Del works.
Any idea?
Thanks.
Jara

I am having a similar problem using the mapping workbench inside JDev 10.1.2.18.38
In one of my pojo classes I extend DescriptorEventAdapter and implement the following method.
public void postUpdate(DescriptorEvent event) {
Rebuild, refresh, click on the event tab in the mapping workbench and it hangs. Have to Ctrl+Alt+Del.

SAP Web As Java Hangs after few days using it

Hi everybody,
I have some applications on an Enterprise Portal running in a Java Web As 6.40. Recently, the following problem has appeared: After a day or two of normal use, the portal starts to reject all the connections that are established to it (specifically, the internet explorer gives a time out error), although in Microsoft Management Console shows all processes in green. The problem solves restarting the instance, but the portal remains functional only few days.
Any hints on solving this?
Thanks for any help,

Hi Parga,
From your case, i believe that there has to be some problem with either application threads or heap memory, which are being freed up after restart.
Kindly let me know the Min Count and Max Count of Application threads, also the heap memory and your physical Memory(RAM).
Do you have any backend systems connected?
TFG - Venkatesh

2.1.1 through 3.0EA - SQLDeveloper hangs after clicking on SQL tab of view

Hi,
the following happens consistently both on SQL Developer 2.1.1.64 and 3.0.2.83 on Mac OS X and Java 1.6.0_22-b04-307 (64bit).
1. I open a connection to an XE database
2. I navigate to the Views node
3. I select a view
4. I click on the SQL sub-tab to display the DDL statement for the view
5. As soon as i click on the tab to return to the SQL scratchpad for the open connection, the color wheel appears and SQL developer hangs and one must "force quit" the application.
As i said, this happens on both versions of SQL Developer
Flavio
http://oraclequirks.blogspot.com

Then it is clearly an issue with the TabSet component...
A couple of related postings (but not for creator) i ran into seemed to have been solved by setting jdk to 1.4.2 (and sometimes it is the ant version that seems to have been the problem):
http://swforum.sun.com/jive/thread.jspa?threadID=103854&messageID=354068
Can u try setting the server's jdk to 1.4.2 and see if the problem goes away? (btw, the error happens at server and not in the ide, right?)

ESS MSS UWL Approval Step Hanging After Clicking Approve

Working on ESS MSS implementation using UWL to approve work items.
Approval task (TS17900101) is sending workitem to UWL, but when I click Approve it just hanging and gives me the processing circle forever.
Binding from the workflow looks like this:
'X' @0E\QAssign Value@ @9T\QGets data for...@ &BACK_BUTTON_VISIBLE&
&FORM_STANDARD& @0E\QAssign Value@ @9T\QGets data for...@ &FORM&
'APPROVEREQUEST' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_SCENARIO_STAGE&
'X' @0E\QAssign Value@ @9T\QGets data for...@ &SAVE_DRAFT_BUTTON_VISIBLE&
'HRASRB' @0E\QAssign Value@ @9T\QGets data for...@ &PROCESSOR_ROLE&
&NOTIFY_VIA_MAIL& @0E\QAssign Value@ @9T\QGets data for...@ &NOTIFY_VIA_MAIL&
&BUSINESS_STATUS& @0E\QAssign Value@ @9T\QGets data for...@ &BUSINESS_STATUS&
'X' @0E\QAssign Value@ @9T\QGets data for...@ &FORM.SUPPRESS_SAVE&
'00000' @0E\QAssign Value@ @9T\QGets data for...@ &FORM.FORM_SCENARIO_VERSION&
Binding to to the workflow as follows:
&PROCSTATE& @9S\QReceives data from...@ @0D\QAssign Value@ &PROCSTATE&
&WORKITEM_ID& @9S\QReceives data from...@ @0D\QAssign Value@ &STEP_OBJECT.GUID&
Program exit: CL_HRASR00_POBJ_WF_EXIT is in place.
Can I please have assistance getting the Approval button to process the Approval?

Resolved - There was a role issue - testing the process with another used account worked.
Looks like it was set up correctly.

Adobe Flash Media Live Encoder 3.2 crash after clicking START in 1280X720 and above.

in 960X480 it works fine but I want it in HD. win 7 all drivers are update.

Moving the discussion to Flash Media Forum.
Regards,
Anit Kumar

Need help troubleshooting problem: Flash hangs after using Firefox (on mac) back button - works fine on all other browsers

to reproduce:
1. click on a flash button that takes you to a new html page
2. hit the back button on browser
3. flash button hangs
I've included a test page as an example below.
the bug is specific to having used the flash button and is specific to the Mac version of firefox. The PC version seems to work fine.

What is the address of the first page? The only thing that link you posted in your information was the page that says, "now hit the back button and see if flash hangs after clicking on the flash button".

Post Goods issue after clicking on Load Starting push button

Hi All,
Post goods issue for deliveries, suppose if the shipment document is created for XXXX country do the post goods issue after clicking the push button loading start on. and if the shipment is created other than the XXXX Country do the post goods issue after clicking the shipment start button(Done by Standard SAP).
There will be validation table in background to identify which shipping point to allow Post Goods Issue before shipment completion. This will require enhancement of Delivery User Exit to incorporate above check based on below mentioned Z Table.
Z-Table
- Shipping Point.
- Delivery Type
Any body please suggest the user exit or any function module and how to start code for this particular requirement.
Thanks & Regards,
Narasimha

Hi,
You can write your own vaalidation on click of loading start button.
Go to include MV56AI_IS_ENHANCEMENT of program SAPMV56A.
Click on the circular button(Enhance).
Then Edit --> Enhancement Operation --> Create.
Create your enhancement giving it a Z name.
Then in this enhancement you can write your code.
For loading start you can write your code in the following fashion.
IF fcode = 'MM_ST03'.
business logic.....
ENDIF.
Regards,
Firoz.

SQL Developer EA3 hangs after start up in MacOS

Does anyone experience this issue? After I install SQLDeveloper EA3 for Mac OS, when I click on the app to start. SQLDeveloper starts up fine and it will present the start-up page. But once it is in the Start-up page, then it hangs with a spinning wheel or hour glass in Windows term. It looks like it is doing something. But it just won't work and it hangs. I have to force kill the job to get out of it.
Does anyone know if there is any issue like this on the MacOS side? I have Java JDK 1.7.45 on my Mac. SQLDeveloper 3 works fine when I uninstall SQL Developer 4 EA3 and put the SQL Developer 3 back. I don't think that this is a java related. But it may be configuration related where SQL Developer appears to go to la la land after it starts up.
So any idea will be greatly appreciated. Thanks.

I did run this from the terminal. I run it from /Applications/SQLDeveloper.app/Contents/Resources/sqldeveloper/sqldeveloper/bin and simply run it with ./sqldeveloper.
I have also updated the sqldeveloper.conf to use debug.conf option.
IncludeConfFile sqldeveloper-debug.conf
When I run it, I receive the following and then it hangs and the spinning wheel happens...
Oracle SQL Developer
Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
Java asserts are enabled!
LOAD TIME : 315
The following lists the dump when I issued kill -3 <pid>:
Full thread dump Java HotSpot(TM) 64-Bit Server VM (24.45-b08 mixed mode):
"status-0" prio=5 tid=0x00007ff974d84800 nid=0x13c0b waiting on condition [0x00000001150a6000]
   java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x00000007f68ee7a0> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2043)
at java.util.concurrent.DelayQueue.take(DelayQueue.java:209)
at oracle.ide.status.StatusExecutor$StatusQueue.take(StatusExecutor.java:338)
at oracle.ide.status.StatusExecutor$StatusQueue.take(StatusExecutor.java:300)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"IconOverlayTracker Timer: null-jdbcNodeInfoType" prio=5 tid=0x00007ff976848000 nid=0x13913 in Object.wait() [0x00000001200a4000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f69a1e80> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
- locked <0x00000007f69a1e80> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:505)
"WaitCursor-Timer" prio=5 tid=0x00007ff974e0a000 nid=0x11d03 in Object.wait() [0x000000011bca5000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f670c360> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
- locked <0x00000007f670c360> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:505)
"WeakDataReference polling" prio=5 tid=0x00007ff97b325800 nid=0x11b03 in Object.wait() [0x000000011bba2000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f674cd10> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
- locked <0x00000007f674cd10> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
at java.lang.Thread.run(Thread.java:744)
"pool-2-thread-1" prio=5 tid=0x00007ff97e1f6800 nid=0x11903 waiting on condition [0x000000011b18a000]
   java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x00000007f62b07d0> (a java.util.concurrent.SynchronousQueue$TransferStack)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:458)
at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:359)
at java.util.concurrent.SynchronousQueue.take(SynchronousQueue.java:925)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:1068)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1130)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:744)
"Scheduler" daemon prio=5 tid=0x00007ff97e621000 nid=0x11707 in Object.wait() [0x0000000117986000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f62f3f08> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
at java.lang.Object.wait(Object.java:503)
at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
- locked <0x00000007f62f3f08> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:479)
"DestroyJavaVM" prio=5 tid=0x00007ff9798c8000 nid=0x1903 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE
"Thread-9" daemon prio=5 tid=0x00007ff97bac2000 nid=0x11303 in Object.wait() [0x000000011b087000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f5225358> (a java.util.LinkedList)
at java.lang.Object.wait(Object.java:503)
at java.util.prefs.AbstractPreferences$EventDispatchThread.run(AbstractPreferences.java:1476)
- locked <0x00000007f5225358> (a java.util.LinkedList)
"Log Poller" prio=5 tid=0x00007ff97b048800 nid=0x11007 waiting on condition [0x000000011a9ca000]
   java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x00000007f55b3160> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2043)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:442)
at oracle.ide.log.QueuedLoggingHandler.take(QueuedLoggingHandler.java:60)
at oracle.ideimpl.log.TabbedLogManager$4.run(TabbedLogManager.java:321)
at java.lang.Thread.run(Thread.java:744)
"JarIndex Timer" daemon prio=5 tid=0x00007ff97b80d800 nid=0x10407 in Object.wait() [0x000000011b474000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f4aaf6f0> (a java.util.TaskQueue)
at java.util.TimerThread.mainLoop(Timer.java:552)
- locked <0x00000007f4aaf6f0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:505)
"TimedCache-Timer" daemon prio=5 tid=0x00007ff97b099000 nid=0x1060b in Object.wait() [0x000000011af84000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f4891358> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Timer.java:526)
- locked <0x00000007f4891358> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:505)
"Framework Event Dispatcher" daemon prio=5 tid=0x00007ff975b08800 nid=0x10203 in Object.wait() [0x0000000117f48000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f41f4ac0> (a org.eclipse.osgi.framework.eventmgr.EventManager$EventThread)
at java.lang.Object.wait(Object.java:503)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.getNextEvent(EventManager.java:400)
- locked <0x00000007f41f4ac0> (a org.eclipse.osgi.framework.eventmgr.EventManager$EventThread)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:336)
"Framework Active Thread" prio=5 tid=0x00007ff9741b6000 nid=0xfe17 in Object.wait() [0x0000000117d42000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f4059920> (a org.eclipse.osgi.framework.internal.core.Framework)
at org.eclipse.osgi.framework.internal.core.Framework.run(Framework.java:1863)
- locked <0x00000007f4059920> (a org.eclipse.osgi.framework.internal.core.Framework)
at java.lang.Thread.run(Thread.java:744)
"CLI Requests Server" daemon prio=5 tid=0x00007ff974975000 nid=0xf103 runnable [0x00000001168f9000]
   java.lang.Thread.State: RUNNABLE
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:398)
at java.net.ServerSocket.implAccept(ServerSocket.java:530)
at java.net.ServerSocket.accept(ServerSocket.java:498)
at org.netbeans.CLIHandler$Server.run(CLIHandler.java:1100)
"Active Reference Queue Daemon" daemon prio=5 tid=0x00007ff974974800 nid=0xef03 in Object.wait() [0x00000001165c5000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3ea0180> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
- locked <0x00000007f3ea0180> (a java.lang.ref.ReferenceQueue$Lock)
at org.openide.util.lookup.implspi.ActiveQueue$Daemon.run(ActiveQueue.java:180)
- locked <0x00000007f3ea0180> (a java.lang.ref.ReferenceQueue$Lock)
"TimerQueue" daemon prio=5 tid=0x00007ff9748c3800 nid=0xd703 waiting on condition [0x000000011220c000]
   java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x00000007f3f10eb8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2043)
at java.util.concurrent.DelayQueue.take(DelayQueue.java:209)
at javax.swing.TimerQueue.run(TimerQueue.java:171)
at java.lang.Thread.run(Thread.java:744)
"Java2D Disposer" daemon prio=5 tid=0x00007ff97489a000 nid=0xd307 in Object.wait() [0x0000000111fc1000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3f264b8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
- locked <0x00000007f3f264b8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
at sun.java2d.Disposer.run(Disposer.java:145)
at java.lang.Thread.run(Thread.java:744)
"Java2D Queue Flusher" daemon prio=5 tid=0x00007ff975884000 nid=0xc207 in Object.wait() [0x0000000110cab000]
   java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3e85998> (a sun.java2d.opengl.OGLRenderQueue$QueueFlusher)
at sun.java2d.opengl.OGLRenderQueue$QueueFlusher.run(OGLRenderQueue.java:208)
- locked <0x00000007f3e85998> (a sun.java2d.opengl.OGLRenderQueue$QueueFlusher)
"AWT-EventQueue-0" prio=5 tid=0x00007ff974883000 nid=0xbb03 waiting on condition [0x0000000110ba8000]
   java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x00000007f3f0f658> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:186)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2043)
at java.awt.EventQueue.getNextEvent(EventQueue.java:543)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:211)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)
"AWT-Shutdown" prio=5 tid=0x00007ff975879000 nid=0x750b in Object.wait() [0x000000010e088000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3f13b80> (a java.lang.Object)
at java.lang.Object.wait(Object.java:503)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:287)
- locked <0x00000007f3f13b80> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:744)
"AppKit Thread" daemon prio=5 tid=0x00007ff975881800 nid=0x507 runnable [0x00007fff5c5bd000]
   java.lang.Thread.State: RUNNABLE
at sun.lwawt.macosx.LWCToolkit.doAWTRunLoop(Native Method)
at sun.lwawt.macosx.LWCToolkit.invokeAndWait(LWCToolkit.java:549)
at sun.lwawt.macosx.LWCToolkit.invokeAndWait(LWCToolkit.java:489)
at sun.lwawt.macosx.CAccessibility.invokeAndWait(CAccessibility.java:75)
at sun.lwawt.macosx.CAccessibility.getFocusOwner(CAccessibility.java:521)
"Service Thread" daemon prio=5 tid=0x00007ff97380e000 nid=0x5303 runnable [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE
"C2 CompilerThread1" daemon prio=5 tid=0x00007ff975823800 nid=0x5103 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE
"C2 CompilerThread0" daemon prio=5 tid=0x00007ff97401a000 nid=0x4f03 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=5 tid=0x00007ff97401f000 nid=0x4d03 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=5 tid=0x00007ff974843800 nid=0x3903 in Object.wait() [0x000000010bef2000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3bdf128> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
- locked <0x00000007f3bdf128> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:189)
"Reference Handler" daemon prio=5 tid=0x00007ff974010800 nid=0x3703 in Object.wait() [0x000000010bdef000]
   java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x00000007f3f24e00> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:503)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:133)
- locked <0x00000007f3f24e00> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=5 tid=0x00007ff974843000 nid=0x3503 runnable
"GC task thread#0 (ParallelGC)" prio=5 tid=0x00007ff974814800 nid=0x2503 runnable
"GC task thread#1 (ParallelGC)" prio=5 tid=0x00007ff974815000 nid=0x2703 runnable
"GC task thread#2 (ParallelGC)" prio=5 tid=0x00007ff974815800 nid=0x2903 runnable
"GC task thread#3 (ParallelGC)" prio=5 tid=0x00007ff974816000 nid=0x2b03 runnable
"GC task thread#4 (ParallelGC)" prio=5 tid=0x00007ff974817000 nid=0x2d03 runnable
"GC task thread#5 (ParallelGC)" prio=5 tid=0x00007ff974817800 nid=0x2f03 runnable
"GC task thread#6 (ParallelGC)" prio=5 tid=0x00007ff974818000 nid=0x3103 runnable
"GC task thread#7 (ParallelGC)" prio=5 tid=0x00007ff974818800 nid=0x3303 runnable
"VM Periodic Task Thread" prio=5 tid=0x00007ff975834800 nid=0x5503 waiting on condition
JNI global references: 1152
Heap
PSYoungGen      total 46080K, used 17363K [0x00000007fbd00000, 0x0000000800000000, 0x0000000800000000)
eden space 23552K, 42% used [0x00000007fbd00000,0x00000007fc6c8250,0x00000007fd400000)
from space 22528K, 32% used [0x00000007fd400000,0x00000007fdb2caf8,0x00000007fea00000)
to   space 22528K, 0% used [0x00000007fea00000,0x00000007fea00000,0x0000000800000000)
ParOldGen       total 131584K, used 73062K [0x00000007f3800000, 0x00000007fb880000, 0x00000007fbd00000)
object space 131584K, 55% used [0x00000007f3800000,0x00000007f7f59820,0x00000007fb880000)
PSPermGen       total 92160K, used 67536K [0x00000007e3800000, 0x00000007e9200000, 0x00000007f3800000)
object space 92160K, 73% used [0x00000007e3800000,0x00000007e79f40d0,0x00000007e9200000)

SAP BW 640-----SAINT HANGS AFTER CLICKING START

Similar Messages

Maybe you are looking for