SAP BW 7.0 - How to use control file?

Hello experts,
In my current project, I need to use a control file to load some flat files into BW.
In version 3.5 we had a option in the infopackage where we could select if it was a csv or a control file.
But in 7.0 version this option is not available anymore.
I found this threat: Use Control File to load data in BW7.0
But a .txt control file didn't work. Can somebody help me?
Thanks!!!

WS adapter can be used as Direct connection or Integrated Server Communication. Basically this adapter will be used to make communication between two SAP System's Webservice runtime. WS adapter supports Webservice reliable messaging , SAML and more security features. Using Direct connection you can communicate two SAP systems. In this case, you dont need any ESR objects and you just need to configure ID objects only.
Have seen this [link|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce28613a8e5430e10000000a42189b/content.htm]
Hope that helps

Similar Messages

How to load data using Control File in BW 7

Hi All,
I have a requirement to load data in BW using control file. The development is done in in BW 7.0. In BW 3.5 in infopackage, there is an option of FILE IS ( Control File or Data File ). Please suggest how to simulate the same in BW 7.0
Regards,
Vikram

Any suggestions?

Use Control File to load data in BW7.0

Hi All,
I have a requirement to load data in BW using control file. The development is done in in BW 7.0. In BW 3.5 there is an option of FILE IS ( Control File or Data File ). Please suggest how to simulate the same in BW 7.0
Regards,
Vikram

Hi Vikram,
Please have the contents of a sample control file. The file should be saved as ".TXT".
FILENAME = C:\test.csv
FILETYPE = CSV
LOCATION = C
FS = ,
ESCAPE = "
DECIMALPOINT = ,
1000SEPARATOR = .
RECCOUNT = 8
RECSIZE = 53
PACKETSIZE = 1000
Filename should contain the path of the CSV file
Filetype is CSV
location is 'C' for Workstation and 'A' for Application Server
FS contains field seperator ',' in our case
RECCOUNT contain the Rec. Count
RECSIZE is the Max DB size of the a single row ( this can be evaluated by the Total DB Size of a single Line of the Target BW Structure as well ).
The content of my sample test.csv are
1234567890,10,9999999999,,,15,01/01/2005
1234567891,20,9999999999,,,30,01/01/2005
1234567892,30,9999999999,,,0,01/01/2005
1234567893,10,9999999999,,,5,01/01/2005
1234567894,20,9999999999,,,6,01/01/2005
1234567895,40,9999999999,,,10,01/01/2005
1234567896,10,9999999999,,,5,02/01/2005
1234567897,20,9999999999,,,6,02/01/2005
Please let me know if there are any further concerns.
Regards,
Shrey
Edited by: Shrey SAP BI on Mar 8, 2010 4:13 PM

How to Restore Control file to New Server

I want to test my backup by restoring the full backup of my production database on a separate test server.
I have taken following action for restore to test server:
•     Copy full backup to Test Server on same folder where it was in Production Server.
•     Copy parameter file to Test Server. (Edit control file location on it)
•     Connect Rman
•     Set DB with new DBID
•     Startup Nomount (from new parameter file)
RUN
ALLOCATE CHANNEL c1 TYPE DISK;
RESTORE CONTROLFILE FROM AUTOBACKUP;
ALTER DATABASE MOUNT;
Then we found following error:
RMAN> RESTORE CONTROLFILE FROM AUTOBACKUP;
Starting restore at 07-NOV-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=9 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20071107
channel ORA_DISK_1: looking for autobackup on day: 20071106
channel ORA_DISK_1: looking for autobackup on day: 20071105
channel ORA_DISK_1: looking for autobackup on day: 20071104
channel ORA_DISK_1: looking for autobackup on day: 20071103
channel ORA_DISK_1: looking for autobackup on day: 20071102
channel ORA_DISK_1: looking for autobackup on day: 20071101
channel ORA_DISK_1: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/07/2007 16:35:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
Can anyone guide me, how to restore control file?
Irfan

RMAN> RESTORE CONTROLFILE FROM AUTOBACKUP;
Starting restore at 07-NOV-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=9 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day:
20071107
channel ORA_DISK_1: looking for autobackup on day:
20071106
channel ORA_DISK_1: looking for autobackup on day:
20071105
channel ORA_DISK_1: looking for autobackup on day:
20071104
channel ORA_DISK_1: looking for autobackup on day:
20071103
channel ORA_DISK_1: looking for autobackup on day:
20071102
channel ORA_DISK_1: looking for autobackup on day:
20071101
channel ORA_DISK_1: no autobackup in 7 days found
RMAN-00571:It seems to me its not finding the contolfile from 7 days before sysdate ,increase the window size using
RMAN>restore controlfile from autobackup maxdays 15;Khurram

How to use XSJS file path in Controller.js file

Hi Experts,
Regarding How to use XSJS file path in Controller.js file.
I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-services article.)
Seems to be there is no information about the same. May be the article is targetted for Beginners and above. As I am a learner I am not able to do the same.
var aUrl = '../../logic/demo_main.xsjs? (highlighted)
Suppose my XSJS file is at http://ipaddress:8000/newtest/Func.XSJS.
Can I use like below
var aUrl = 'http://ipaddress:8000/newtest/Func.xsjs?
or
var aUrl = '../../newtest/Func.xsjs?
I tried with multiple options but not able to get the expected output.
Can you please provide more details on this?

Dear Thomas,
I am a abap developer , recently we meet a problem on our webdynpro report performnace issue. As in the development, we use SALV_WD_TABLE to design a ALV. and verything work correctly in our DEV system.
But after when our QAS system, there are more records for the ALV, one of them has 21000 records. And in the layout, we have a column as checkbox.
If we click any one checkbox, then the layout will respond almost 1~2 minutes. With debug I found the most time cost in the standard program.
And with search I found that you have solution to solve it as 1,000,000 rows.
So is it possible to provide some idea or solution to us?
Many thanks for your help!
BR
Vincent Chen

How to Use PHP Files and .tpl files

I have taken a course and it includes a resource section with templates that I can use. These templates are squeeze page ones and inside the folder are index.php, config.php and a whole lot of .tpl files that open up in empty Stickies on my Mac.
Can someone explain how to use these files. When I open them in Dreamweaver I see code related to the php files but I can't browse the index.php file in a browser to see what the so called sqeeze page looks like.
Yikes I'm really lost here.
thanks
John

ORA-06401, 00000, "NETCMN: invalid driver designator"
Cause: The login (connect) string contains an invalid driver designator.
Action: Correct the string and re-submit.
The //ip:port/sid connect string will only work with 10g clients.
Check your tnsnames.ora file. Does the file have control characters or missing carriage-return characters ? (Maybe you ftp'd the file from a unix box ?)
I would suggest that you create a new tnsnames.ora - hand edit it (don't copy the old one). If you have sqlplus client - try using it to connect to the remote DB first.
The instructions for connection to a local or remote DB are all the same (when using plain OCILogon) because the connection is made over TCP.

How to use property file - sql query define in property file

Hi All,
Anybody please tell me how to use property file.
I have placed sql query in propery file and I have to access this in my file.
well so far this is my code but don't know how to implement in the following ...
pstmt = con.prepareStatement("select * from registration where username=?");
instead of writting the query I want to use the property file.
so far I have developed the following code...
FileInputStream fis = new FileInputStream("querysql.property");
Properties dbProp = new Properties();
dbProp.load(fis);is the code correct... or is there another way to access property file
Please help.
please reply soon....
Thanks

Before answering, check if it's already been done here http://www.jguru.com/forums/view.jsp?EID=1304182

How to use XML file as a source in BODS?

How to use XML file as a source in BODS?
Could anyone please help me out for this?

exmpale XML file :
<?xml version="1.0" encoding="utf-8"?>
<MM_RECON_REPORT>
<RPT_DATE>str1234</RPT_DATE>
<RPT_ROW>
    <SRC_EXT_REC_COUNT>123.45</SRC_EXT_REC_COUNT>
    <PRE_TRANS_REC_COUNT>123.45</PRE_TRANS_REC_COUNT>
    <POST_TRANS_REC_COUNT>123.45</POST_TRANS_REC_COUNT>
    <PASS_BAPI_REC_COUNT>123.45</PASS_BAPI_REC_COUNT>
    <TOT_SAP_RETURN>123.45</TOT_SAP_RETURN>
    <TOT_SAP_SUCC_REC_COUNT>123.45</TOT_SAP_SUCC_REC_COUNT>
    <PARTIAL_SUCC_REC_COUNT>123.45</PARTIAL_SUCC_REC_COUNT>
    <TOT_SAP_ERR_REC_COUNT>123.45</TOT_SAP_ERR_REC_COUNT>
    <MM_SUCC_REC_COUNT>123.45</MM_SUCC_REC_COUNT>
    <MM_ERR_REC_COUNT>123.45</MM_ERR_REC_COUNT>
    <CLS_SUCC_REC_COUNT>123.45</CLS_SUCC_REC_COUNT>
    <CLS_ERR_REC_COUNT>123.45</CLS_ERR_REC_COUNT>
    <CP_SUCC_REC_COUNT>123.45</CP_SUCC_REC_COUNT>
    <CP_ERR_REC_COUNT>123.45</CP_ERR_REC_COUNT>
    <VMS_SUCC_REC_COUNT>123.45</VMS_SUCC_REC_COUNT>
    <VMS_ERR_REC_COUNT>123.45</VMS_ERR_REC_COUNT>
    <SOURCE_TYPE>str1234</SOURCE_TYPE>
    <RUN_ID>123.45</RUN_ID>
    <RUN_SEQ>123.45</RUN_SEQ>
    <RUN_DATE>2012-12-13</RUN_DATE>
</RPT_ROW>
</MM_RECON_REPORT>
example XSD file :
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:annotation>
    <xsd:documentation xml:lang="en">
    XML Schema generated by Data Services
    </xsd:documentation>
</xsd:annotation>
<xsd:simpleType name="DIType-decimal-28-0">
<xsd:restriction base="xsd:decimal">
    <xsd:totalDigits value="28"/>
    <xsd:fractionDigits value="0"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-200">
<xsd:restriction base="xsd:string">
<xsd:maxLength value="200"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DIType-varchar-10">
<xsd:restriction base="xsd:string">
    <xsd:maxLength value="10"/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="DATE">
<xsd:restriction base="xsd:date">
</xsd:restriction>
</xsd:simpleType>
<xsd:element name="MM_RECON_REPORT" >
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element ref="RPT_DATE" minOccurs="0" maxOccurs="1"/>
        <xsd:element ref="RPT_ROW" minOccurs="0" maxOccurs="unbounded"/>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:element name="RPT_DATE" type = "DIType-varchar-200"/>
<xsd:element name="RPT_ROW" >
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element ref="SRC_EXT_REC_COUNT" />
        <xsd:element ref="PRE_TRANS_REC_COUNT" />
        <xsd:element ref="POST_TRANS_REC_COUNT" />
        <xsd:element ref="PASS_BAPI_REC_COUNT" />
        <xsd:element ref="TOT_SAP_RETURN" />
        <xsd:element ref="TOT_SAP_SUCC_REC_COUNT" />
        <xsd:element ref="PARTIAL_SUCC_REC_COUNT" />
        <xsd:element ref="TOT_SAP_ERR_REC_COUNT" />
        <xsd:element ref="MM_SUCC_REC_COUNT" />
        <xsd:element ref="MM_ERR_REC_COUNT" />
        <xsd:element ref="CLS_SUCC_REC_COUNT" />
        <xsd:element ref="CLS_ERR_REC_COUNT" />
        <xsd:element ref="CP_SUCC_REC_COUNT" />
        <xsd:element ref="CP_ERR_REC_COUNT" />
        <xsd:element ref="VMS_SUCC_REC_COUNT" />
        <xsd:element ref="VMS_ERR_REC_COUNT" />
        <xsd:element ref="SOURCE_TYPE" />
        <xsd:element ref="RUN_ID" />
        <xsd:element ref="RUN_SEQ" />
        <xsd:element ref="RUN_DATE" />
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
<xsd:element name="SRC_EXT_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PRE_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="POST_TRANS_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PASS_BAPI_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_RETURN" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="PARTIAL_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="TOT_SAP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="MM_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CLS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="CP_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_SUCC_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="VMS_ERR_REC_COUNT" type = "DIType-decimal-28-0"/>
<xsd:element name="SOURCE_TYPE" type = "DIType-varchar-10"/>
<xsd:element name="RUN_ID" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_SEQ" type = "DIType-decimal-28-0"/>
<xsd:element name="RUN_DATE" type = "xsd:date"/>
</xsd:schema>
compare the xml vs xsd for better understanding

How to use properties file

Hi,
I want to use properties file in my application. I have kept properties file inside a directory called properties which is inside myProject(which is the parent directory of my project) i.e "myProject/properties".
My java file where i want to call this properties file is inside the myProject/WEB-INF/src/java.
How can i call the properties file from myProject/WEB-INF/src/java/PropertyReader.java
I wrote java program in myProject/WEB-INF/src/java/PropertyReader.java like:::::
ResourceBundle resBun = ResourceBundle.getBundle("Test", Locale.getDefault()); // Test.properties is inside myProject/properties
resBun..getString("name");
After running the program i am getting the following errors:::::
Exception in thread "main" java.util.MissingResourceException: Can't find bundle for base name Test, locale en_US
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:836)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:805)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:576)
at PropertiesReader.main(PropertiesReader.java:4)
What is the issue? How to use properties file?
Waiting for reply.
Thanks

Still getting same exception. As you explained i tried like the below:::
1. I am using ant as build tool.
2. My properties file is for database configuration
My properties file is::
database.properties (inside myProject/properties)
JDBCDriver=org.gjt.mm.mysql.Driver
JDBCConnectionURL=jdbc:mysql://pmdbmysql:3306/bandwidthshaper?user=admin&password=admin
My java package structure is
WEB-INF/src/java
WEB-INF/src/classes
For build WEB-INF is the base directory and build.xml is inside the src directory
In my build.xml i wrote the following lines for compilation::
          <target name="compile" >
               <javac srcdir="src" destdir="src/classes" debug="true" debuglevel="lines,vars,source">
                    <classpath refid="class.path"/>
               </javac>
<copy todir = "src/classes" >
<fileset dir = "../properties" />
</copy>
               <jar jarfile="lib/${project.jar.file}" basedir="src/classes"/>
          </target>
I am copying properties file to the classes directory.
Now in java file which is inside /WEB-INF/src/java, I wrote::
try {
Properties programProps = new Properties();
InputStream is = getClass().getResourceAsStream("/database.properties");
if(is == null)
throw new IllegalStateException("Properties file missing ");
programProps.load(is);
System.out.println("driver name::::::: "+programProps.getProperty("JDBCDriver"));
is.close();
} catch(Exception e) {
e.printStackTrace();
After compilation in my classes directory i am getting database.properties file and my java file with package.
At the time of running i am getting "java.lang.IllegalStateException: Properties file missing"
Now tell me where is the fault. Why again i am getting exception.
Thanks

Its urgent how to use calss file of jar located in lib folder

how to use calss file of jar located in lib folder.
i want to use RowSetDynaClass class which is in beanutil jar file which is in my lib folder .if i use that class in my jsp following error is coming.
Class RowSetDynaClass not found.
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
how to access class in jar file.
please help

You have to either refer to the class in its fully quallified name, or import it into the JSP:
<%
some.full.packagename.RowSetDynaClass resultSet = new some.full.packagename.RowSetDynaClass(rs,false);
...-or-
<%@ page import="some.full.packagename.RowSetDynaClass" %>
<%
RowSetDynaClass resultSet = new RowSetDynaClass(rs, false);
...As long as the class has public visibility and you have re-started the server/servlet context since you added the JAR.

How to use batch files to send the load from ODC to UCM?

Hello all.
We're trying to do this along this week and, until now, we couldn't figure out how to use batch files containing metada on ODC and commit the output files to UCM.
So these are our specs:
VM 1
ODC - 10gR3
OS - Windows XP 32 bits SP3
DB - Oracle DB 11.2
VM 2
No ODC
UCM 11.1.1.6
OS - Enterprise Linux Enterprise Linux Server release 5.5 (Carthage)
We've opened a ticket with Oracle Support to know how we should do this. The number is SR 3-6108348211.
Let me try to explain what we want to do:
1 - we have a batch file with all metadata of many files from UCM
2 - we want to use this file in ODC, so the application will convert the images and commit them to UCM
3 - we should see all these files, their metadata, thumbnails and related content in UCM
4 - this is a batch file example we want to send to ODC:
@Properties LocalData
IdcService=CHECKIN_UNIVERSAL
dRevLabel = 1
primaryFile=/tra/Relatorio_UHPF-03-04-2008-M-RL-EA.pdf
dDocName=TRA_33
dDocTitle=UHPF-03-04-2008-M-RL-EA
dSecurityGroup=MAM_TRA
dDocType=Document
dDocAuthor=luis.neotropical
dInDate=14/05/08
xC_CLASSIFICACAO=EA - Educação Ambiental
xC_DATA=01/04/08
xC_DATAVALIDADE=30/04/08
xC_LOCALIZACAOFISICA=N/D
xC_USUARIO_DEP=LUIS FERNANDO DA CAMARA
xC_TIPO=RL - Relatório
xC_USINA=UHPF - USINA HIDRELÉTRICA PASSO FUNDO
xC_FICHA=MAM - Relatorios Ambientais
xC_IDDOCMAN=TRADocID=157
xC_IDANEXODOCMAN=TRAFileID=33
xC_DESTINOINICIAL=Tractebel
xC_ORIGEM=Neotropical
xC_FORMATODOCUMENTO=Digital
xC_GENERODOCUMENTO=
xC_DOCPRINCIPAL=Sim
@end
<<EOD>>
5 - So, when we use this batch file on ODC, the file (or image) will be converted, all metadata attached and then sent to UCM.
But we don't know how to do the link between ODC and UCM. The Oracle Support says it is necessary to do some customization. In the books I could not find any info about how to do, just generic information or how to use ODC.
Is there a way (without customization) to do that? Can anyone give us a step-by-step guide?
Thanks for all help and guidance.
Fernando

What is the one-sentence requirement or issue you're trying to solve?
If you only want content to be converted to pdf, then you should already have that with your items checked into UCM (if you have IBR enabled).
if you really want to feed content into ODC using a batchfile, my first thought would be to create a transformation utility/app that will convert your batchfiles to the expected ODC import server folder job format. then you'll have to move or map the content to match.
Again, without knowing the exact issue/business requirement you're trying to work through, I'd say a redesign of your ingestion process may be in order.
If you feed content directly into ODC through any supported ODC method (watch folder, email, scanner, fax, etc), then you'll be able to use everything ootb as you'll be able to auto-commit directly into UCM or add an indexing step and manual commit to UCM.
ODC is basically a front end for indexing and extra ingestion options to your content repo.
IPM is basically the same, but it includes some extra process-related details (process metadata, process integrations/bpel/bpm, other system integrations/ebs/crm, etc). I don't feel that IPM would help with the transformation-specific question you've put out there.
-ryan

How to use usb files on ipad mini

how to use usb files on ipad mini

If you're trying to read files off a USB drive onto an iPad, it really doesn't work. The iPad can read specifically named photo and video files off SOME USB drives, but cannot read documents or music or other kinds of files. And there is zero support to write info from the ipad onto any USB device

How i use bainary file

hi master
sir i forget my sun application server password
sombody give me idea i use my master-password file
please give me idea how i use bainary file
thanks
aamir

hi master
sir i forget my sun application server password
sombody give me idea i use my master-password file
please give me idea how i use bainary file If that sun application server is any smart it would store those passwords
one way encrypted so those binary files aren't really of any use.
And, as everybody knows you should stick your passwords at the back
of your keyboard scribbled on a little yellow note ;-)
kind regards,
Jos

How to use swf file for Spark Skin

Hi all
I have little confuse about how to use swf file with Spark Skin,
in Flex3 , i use Flex Skin Design Extension for Flash to deal with skin ,
so basically , I just create a swf file and import to the project , then everything is ok
but , seem that not working in flex4 , spark skin.
1` I can't find the Flex Skin Design for the FlashCs4
2` I try to use FlashCs3 version to import the skin art to the project , but seemed not working.
3` I Google and check the Flex4 Help , seemed Spak skin need the Skin-Class , which I don't know how to use that with swf file
what I have searched is how to use FXG , or some jpg file in that skin class, none of them are use swf file.
so , is there any way that let user use the swf file to deal with the skin?
is the Flex Skin Design can use in Flex4?
Thanks

Hello,
I'm new to Flex, but have come to it from Flash Pro. I'd like to know the same thing. I think I found the answer here:
http://www.flashallys.com/blog/spark-button-skinning-with-flash-symbols/
However my question is now: Is this a good approach to use?
99% of the googling I've done tells me to skin components with fxg files. I've tried that by creating graphics and exporting from flash, but using swfs containing lots of graphics is much faster so I'd rather use that.
The other thing I've done is to create custom components using these helpful tutorials:
Creating component in flash:
http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-flash-cs4/
Dealing with Resizing with method overrides for your flash component:
http://www.psyked.co.uk/flex/creating-flex-components-the-easy-way-for-flash-ide-converts. htm
This allows me the flexibility of Flash Pro design with the layout, transistions, data binding etc from Flex.
So my question is: Is this approach (skinning spark components with swfs, and using custom swc components made in flash) a bad idea for any reason? E.g. does it create slow mobile apps?
Cheers
Chris

How to delete a single data from table using control file

I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PM

977940 wrote:
I want delete a single row data from table using sql loder control file
Edited by: 977940 on Dec 19, 2012 9:00 PMWhy?
And how do you imagine this happening with sqlloader?
The entire purpose of sqlloader is to load data (hence, the name sql*loader*) into a table from an external source. If you want to delete rows from a table, you use the sql DELETE statement.
What is the business problem you are trying to solve?

SAP BW 7.0 - How to use control file?

Similar Messages

Maybe you are looking for