SAP BW 7.4 on MS SQL- With ABAP & JAVA Stack as same SID

Dears,
If you have any experience or idea for SAP NetWeaver Business Warehouse 7.4 installation on MS SQL or Oracle Database with ABAP Stack and Java Stack as same SID.
Kindly help for this possibility.
Regards,
Sri

Hi Experts,
Great for viewers.
But still expecting some ideas above questions kindly answer.
Also i got some important points.
Java Stack for BW on HANA
At least any one answer the purpose of BW Java Stack.
Regards,
V Srinivasan

Similar Messages

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

Install abap + java stack with PI and MDM trail versions

Hi
I would like to install NetWeaver 7.01 sp3 trail version in my laptop which has HD 320GB with 4GB RAM.
Also I want to install MDM in the same laptop. Is it possible? Will PI comes with ABAP + jAVA stacks?
Which OS is the right platform for doing the same.
Thanks very much.

Hi Mr. Chennai,
Check http://service.sap.com/pam for all hardware requirements.
Thanks
Sunny

SAP BW 7.4 on HANA ABAP & JAVA stack

Hello,
We have requirement for SAP BW 7.4 on HANA ABAP & JAVA stack integration.
Please clarify the doubts.
1. Is there any possibility to install ABAP & JAVA stack same SID?
2. If install different with SIDs, How can we do integration? Any restriction is there to integrate?
3. Can we use same HDB SID for both ABAP & JAVA stack?
4.We plan to configure the JAVA stack as UME data source from ABAP stack, Is it good practice?
Any one share the better ideas & solutions for this issue.
Regards,
V Srinivasan

Hi Experts,
Great for viewers.
But still expecting some ideas above questions kindly answer.
Also i got some important points.
Java Stack for BW on HANA
At least any one answer the purpose of BW Java Stack.
Regards,
V Srinivasan

SAP EHP4 SR1 for SAP ERP 6.0 with ABAP + JAVA

Hi all,
we want to install ABAP+JAVA on same machine with different SID.
Is sap recommand this to install ABAP+JAVA on same machine.
regrads
Khan

Hi,
There is no problem to install one abap sid and one java sid on the same server If it has enough hardware resources :
CPU, disk space and speciallly a sufficient amount of RAM.
Regards,
Olivier

Delete JAVA Stack in system with ABAP+JAVA

Hello,
A few days ago I installed a SAP ERP 6.0 SR3 with both stack: ABAP+JAVA.
But now due some things, I want to know if it is possible to delete the JAVA stack! Yesterday I did a search how to do this, how it is possible to do this, and I found a document/presentation "SAP NetWeaver 7.0 - Deinstalling Java Add-In" on the following link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/608b079f-d0f2-2c10-62ac-a00f1b6d536f
The database of this system is a MS SQL Server 2008 (R2) and the operation system a Windows Server 2008... and as you can read in this document, it is more focused on Oracle databases, so I would ask you if this document is correct (it is official?) and if it is possible to do this in SQL Server environment, and if you know which are the manuals post installation activities for SQL Server, because all that manual post installation steps in this document is for Oracle DB!
Thank you in advance.
Kind regards,
Joao Dimas - Portugal

Hello Subhash.Chandra
I did the deinstallation of SAP Java Add-In, for this I followed that document which I described above. After deinstallation through sapinst, I also eliminated some directories as it is mentioned in that document, like the following directories:
DIR_GLOBAL\security\data
DIR_INSTANCE\SDM
DIR_INSTANCE\j2ee
I also delete all Java parameters in default and instance profile (like j2ee*).
So, after all, I started the ABAP instance... the system was starts, but I unfortunately the SAP MMC console show a yellow semaphore which is related with a problem disp+work.EXE, it have the following status:
Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable.
I already restarted the sap system but even so that error is shown!
I checked the dev_disp:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        DEV
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    311
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        1456
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1456) [dpxxdisp.c   1292]
     shared lib "dw_xml.dll" version 311 successfully loaded
     shared lib "dw_xtc.dll" version 311 successfully loaded
     shared lib "dw_stl.dll" version 311 successfully loaded
     shared lib "dw_gui.dll" version 311 successfully loaded
     shared lib "dw_mdm.dll" version 311 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sun Jul 24 03:14:40 2011
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5530]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SRVSIAPP04_DEV_00                       <
DpShMCreate: sizeof(wp_adm)          29792     (1752)
DpShMCreate: sizeof(tm_adm)          5912704     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000011AB0050, size: 6614288)
DpShMCreate: allocated sys_adm at 0000000011AB0050
DpShMCreate: allocated wp_adm at 0000000011AB22A0
DpShMCreate: allocated tm_adm_list at 0000000011AB9700
DpShMCreate: allocated tm_adm at 0000000011AB9760
DpShMCreate: allocated wp_ca_adm at 000000001205CFE0
DpShMCreate: allocated appc_ca_adm at 0000000012062DE0
DpShMCreate: allocated comm_adm at 0000000012064D20
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000120EB9B0
DpShMCreate: allocated gw_adm at 00000000120EBA30
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000120EBA60
DpShMCreate: allocated wall_adm at 00000000120EBAD0
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8191MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Sun Jul 24 03:14:41 2011
J2EE server info
start = TRUE
state = STARTED
pid = 2776
argv[0] = E:\usr\sap\DEV\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\DEV\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_SRVSIAPP04
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=SRVSIAPP04_DEV_00
argv[8] = -DSAPPROFILE=E:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS00_SRVSIAPP04
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework

Java Stack is not started in SAP netweaver ABAP+JAVA Stack

Dear All,
Win2003 64 bit , ECC6.0 , Oracle 10.2.0.2.
Its a newly installed SAP Netweaver Dual Stack (PI) , Yesterday i have done Client copy from 001 to 999 (SAP_UCUS).
Client copy also successfully completed .
login/system_client=999 ,i have activated in Default profile and i have restarted the Server.
Now i dont have issue with ABAP stack ,its working fine, but java stack is not working running.
std_output0.out log:
Service com.sap.aii.adapter.mail.svc started. (812 ms).
Service com.adobe~XMLFormService started. (2937 ms).
Service com.sap.aii.af.ispeak.svc started. (390 ms).
ServiceManager started for 73719 ms.
Framework started for 85781 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel September 11, 2006 16:35 GMT
>
Login :### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
SAP J2EE Engine Version 7.00 PatchLevel is shutting down! PatchLevel September 11, 2006 16:35 GMT
=================
C:\Documents and Settings\ixdadm>jcmon pf=D:\usr\sap\IXD\SYS\profile\IXD_DVEBMGS
00_SAPXIDEV
[Thr 4576] MtxInit: -2 0 0
============================================================
JControl Monitor Program - Main Menu
============================================================
0 : exit
10 : Cluster Administration Menu
20 : Local Administration Menu
30 : Shared Memory Menu (Solid Rock, experimental)
command => 20
Can't open shared memory administration (rc = -107)
============================================================
Kindly suggest .
Edited by: satheesh0812 on Dec 30, 2010 12:00 PM

Hi,
Please provide the full log entries of server0_out.log.
You can access UME service properties in config tool by following this path..
Global server configuration -> services -> com.sap.security.core.ume.service
There you can set the following settings for new client 900 (it u want to change it)
ume.r3.connection.master.client
ume.r3.connection.master.user
ume.r3.connection.master.passwd
Refer this [useful link|http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bbdccc7850064e10000000a1553f7/frameset.htm] to get more detailed information. Refer [Config Tool actviities|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a3d713-5ab6-2c10-ddb1-e7487bc33384?quicklink=index&overridelayout=true] link To get more information.
Also, Make sure that the Users J2EE_GUEST, J2EE_ADMIN, SAPJSF ABAP Users exist in the ABAP client (i.e. client number as mentioned in ume.r3.connection.master.client ) and they are not locked. All the required roles need to be assigned properly.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Dec 31, 2010 2:58 PM

Preview installation with ABAP, JAVA and EP

Hello all
I repost this topic to mark with the "question star".
I been inactive in the sneak preview area for a few month and I see here in SDN that a lot of new software is ready for download.
I have also read some of the postings from this forum, but I'm not sure what I need to have an installation with both ABAP, JAVA en EP.
Can anyone verify that I need:
1 server for the WAS 6.20 for ABAP
1 server for SAP Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview for JAVA and EP.
And that I can join the 2 systems via rfc or connectors.
Is it also possible to get a Sneak Preview to Web Dynpro (or is it included in the above) ?
Best regards
Thomas Madsen Nielsen

The combined ABAP and JAVA stack Web AS doesn't support installation of EP on top.
If you want the features of both ABAP and JAVA stack in combination with EP then you will need two WebAS instances, one of those MUST BE Java ONLY!
I suppose you could manually club things together with SDM, but the installation program (SAPinst) in its current form is pretty specific in its checks for a JAVA only Web AS before letting you proceed with EP install.
I have not done a thorough check of the details on why you cannot run EP with Athe ABAP stack, it hasn't been worth the effort of trying....
Nick

Is XML-SQL Utility for Java run on Client Side?

A question about the XML-SQL Utility for Java
When a client program connect to a Oracle database (the clinet program and Oracle DB is run on two different machine. Oracle 8i is used) and use the oracle.xml.sql.query.OracleXMLQuery Class (form the XSU) to generate XML by given a SQL query. I want to know the transforation process is execute in the Clinet side or the database?
Is there any method that i can retrieve the XML directly from the database rather then doing the transformation form the Client side?

Set JDK_HOME to the directory where you install your JDK (Java Development Kit).
So instance, I've install JDK1.1.8 on my
C drive so
set JDK_HOME=c:\jdk1.1.8;c:\jdk1.1.8\bin

Adobe forms with out Java stack

Hi all,
Can we install and use Adobe forms without portal. i.e can we install interactive forms on the ABAP stack, develop them and use the same?
HEre is the actual requirement. We want to implement some interactive forms and we do no thave the Java stack built up and probably it is too late to build a java stack.
regards
raj
Edited by: rajkishore on Oct 28, 2008 3:22 PM

Sameer,
You can develop forms in your ERP system (ABAP stack) and can still run it without portal. But you will require JAVA stack as Adobe Document Servcies (ADS) can ONLY be configured on JAVA stack.
Chintan

Error export from my database sql 2005 with Windows 2003 abap+java

Hi all
I'm trying to create an Export from my database sql 2005 with Windows 2003, but SAPINST starts with an error. ABAP+JAVA stack
While running the export preparation, I am getting the following error;
INFO 2010-09-08 12:12:43
Output of C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key is written to the logfile C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log.
WARNING 2010-09-08 12:12:46
Execution of the command "C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key" finished with return code 64. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_13-b06, mixed mode)
ERROR 2010-09-08 12:12:46
CJS-30071 Execution of UTL tool 'C:\j2sdk1.4.2_13-x64\bin\java.exe -classpath D:\usr\sap\BID\SYS\global\sltools\sharedlib\launcher.jar -showversion -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jce.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_jsse.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_smime.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/iaik_ssl.jar;
JRBIWD/sapmnt/BID/SYS/global/security/lib/tools/w3c_http.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.infoprovider_lib.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comsl.ut.manager.offline.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/antlr.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/exception.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/jddi.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/logging.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/offlineconfiguration.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/opensqlsta.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/tc_sec_secstorefs.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/sap.comtcsdtcvlimpl.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SDMutil.jar;D:/usr/sap/BID/SYS/global/sltools/sharedlib/SLUtil.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\base.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\util.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\sqlserver.jar;D:\usr\sap\BID\DVEBMGS01\exe\mssjdbc\spy.jar -export -type=keydb "-expfile=C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/usages_data.xml" -log=UTL_load_usages.log -sid=BID -dsn=jdbc/pool/BID -ssprops=D:/usr/sap/BID/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/BID/SYS/global/security/data/SecStore.key' aborts due to database connection error with return code 64.<br>DIAGNOSIS: The connection parameters are wrong or the database server is shutdown.<br> SOLUTION: Check 'UTL_load_usages.log' and 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/MSS/EXP/CENTRAL/AS/PREEXP/UTL.java.log' for more information.
ERROR 2010-09-08 12:12:46
FCO-00011 The step getUsageTypes with step key |NW_Prepare_Export|ind|ind|ind|ind|0|0|NW_Java_Prepare_Export_Dialog|ind|ind|ind|ind|5|0|getUsageTypes was executed with status ERROR .
Could anyone please help me out on this, if possible?
Thanks
JM

Hi,
please ensure that you use a SAP supported JDK as below:
716604 for the Sun JDK (Windows, Linux, Solaris)
709140 Recommended JDK and VM Settings for the WebAS630/640/7.0
And the re try the export pls.
Regards,
Snow

Install ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

Hi all,
I need to install ECC with EHP4 and also JAVA stack.
I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
What should I choose?
Regards
Thanks

Hello,
SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
So you can do this sequence
Suresh

How to integerate BEx query with Portal (Java)

Hi folks,
I installed SAP Netweaver 2004s Sneak Preview ABAP+JAVA , Stack 9 for Linux with VMWare test drive. I have configured and enabled BW/BI in Netweaver. I have also configured SLD and its Status is "running" in J2EE engine.
I designed one simple BI application through Tcode: RSA1, and then created Query for data analysis thruogh Query Designer. How can I establish the link between AS ABAP with AS JAVA to publish the query on portal. I want to use BEx Report designer and Web Application Designer, but I can't execute the result on the portal from these designer tools.
Do I need to create RFC destination on both sides ABAP and JAVA, but how , anyone can give an example for the required procudure.
thanks.
Obaid

Hi,
Thanks all of you, Venkatramani Hariharan , with the help of your given link I am able to to apply the part of the configuration from the document as described by the writer.
But on Step No. 6 : Step 6: Import BW Certificate to the Portal
Under Step 6:
I succeeded to complete first 6 steps but from step 7 , author guided me to continue in Visual Administrator and choose <SID>/Server<#>/Services/Security Provider
- Under Component, choose Ticket.
- Choose the Authentication tab page.
- Change the options for com.sap.security.core.server.jaas.EvaluateTicketLoginModule and enter the following values:
like
trustedsys<Number>=<BW_SID>, <BW_CLIENT> (for example, BWP, 000)
u2022
trustediss<Number>=<ISSUER_DISTINGUISHED_NAME> (z. B. CN= BWP, OU=SAP Web AS, O=SAP Trust Community, C=DE)
u2022
trusteddn<Number>=<SUBJECT_DISTINGUISHED_NAME> (z. B. CN= BWP, OU=SAP Web AS, O=SAP Trust Community, C=DE)
But in the window all the modification button(s) are disbale like "Modify", "Remove", "Add New".
So, Is there any way to make those enable to apply the changes. Please help me in this context.
thanks
Obaid.

Login issue with respect to ABAP and JAVA Stack

Dear All,
we are trying to make an external facing portal which has
   Content Area
   Left Navigation(custom par)
   Login
we are having two servers one is running on ABAP stack and other one on JAVA stack, at different locations.we need to deploy the same portal applications on both the servers.Both the servers are EP7 and SP10
I had downloaded the com.sap.portal.runtime.logon.par.bak file and renamed it and modified it in terms of taking out the TopArea.txt and BotArea.txt from the umlogon.jsp page and uploaded the par in portal and created the ivew for the same.
our requirement is similiar to the funtionality as of SDN External Facing portal.
The iview(logon iview) is added to the anonymous framework page.The iviews on both the servers have the same par.
In case of ABAP stack server,after logon,the respective roles of the user are rendered in the Left Navigation.
However in case of JAVA Stack sever ,after logon, one enters into the portal itself.
We are not able to ascertain what might be the reason for such a behaviour, as the par is same in both the server. Is there any different mechanism, in case of Java Stack and ABAP stack? If so what points need to be kept in mind?
Also would like to know, is the approach correct? or is there any other approach?
Thanks
Gunjan

Hi Michael,
Firstly, I'll explain the complete scenario.
The configuration of the two servers are as below.
1) The server is running on ABAP+JAVA Stack and the data source of UME Collaboration data source is on ABAP System
2)The Second server is running on Java Stack and the UME collaboration data source is Database only.
our portal has the same desktop on both the server. there are no TLN. We have only Masthead, Left Navigation, Content Area and Login. Everything is the same except the above mentioned points.
On the 1st System, when we log on we are able to see our custom Desktop developed by us.
On the 2nd server, when we log on, we are not able to see the custom Desktop developed by us, infact we get the default SAP Netweaver Portal with TLN specific to the Logged in User.
Why are we facing this scenario in the 2nd server, We felt it might be because of the difference in the Stack and Data Source. Are we targeting in the right direction?
Or is it that we are missing some thing or doing something wrong in the UME configurations on the 2nd System.
Thanks

SAP Solution Manager ABAP or JAVA or ABAP+JAVA ?

Hello.
I want to install Solution Manager for use Maitenance Optimizer ( accept download baskets, configure other SAP system, support packages ...).
I wanted to know if installing ABAP instance is enough? or I have to install Java also?
Regards,
Amit

Amit,
SAP Solution Manager is separate application. You need ABAP+Java stack to use Maintenance Optimizer.
Please read documentation from following link
[http://www.service.sap.com/solutionmanager]
Best Luck,
Digesh Joshi

SAP BW 7.4 on MS SQL- With ABAP & JAVA Stack as same SID

Similar Messages

Maybe you are looking for