SAP BW Adhoc Work
Hi Experts
Can you please specify what is Adhoc Work /Adhoc Development in terms of SAP BW
Thanks
Hi
The development nowadays should meet the frequently changing requirements of the client. The development should be scalable and adaptable to the new or as-and-when requirement of the client requirement. Developing the objects/ reports..etc in these lines may be called as AdHoc.
rgds
Hemanth
Similar Messages
-
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
Book For SAP SYCLO Agentry Work Manager 6.0
Hi Expert's,
Can any one suggest me the book for SAP SYCLO Agentry Work Manager 6.0 , Which covers End-To-End Implementation methodology?
Answer appreciates.
Thanks
Rag
Tags edited by: Michael ApplebyMoved to SAP for Mobile. Application related, not SMP.
Regards, Mike (Moderator)
SAP Customer Experience Group - CEG -
How to forward support messages to SAP in non-working time automatically?
Hi colleagues and Happy New Year!
I have a question: how to forward support messages to SAP at non-working time automatically?
Details:
when a support message is created at working time it shouldn't leave my system, but when
a support message is created at non working time, for example, on saturday night it should be sent to SAP automatically. Where in the system I can find the options to customize it to provide these requirements?
Edited by: Helen Rudnikovskaja on Jan 3, 2009 12:36 PMHi These 2 notes wil solve your problem,
Note 1084744 - Problems with the automatic function "Send to SAP"
Note 1225682
Pls assign pts. -
SAP mmc Disp+work process to be stopped
Hi,
I installed SAP Ecc6 + oracle 10g on windows 2003, after we restart the server SAP mmc Disp+work process to be stopped.
I ran the R3trans -d, i got the below error
2EETW169 no connect possible: "DBMS = ORACLE -
oracle_sid= 'DEV;ECC'"
R3trans finished (0012).
tans.log fiel
=========
4 ETW000 [dev trc ,00000] New connection 0 created 30 0.006959
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.006993
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 19 0.007012
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.007035
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 31 0.007066
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in profile missing
4 ETW000 90 0.007156
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID = 'DEV;ECC'"
sqlnet.log
========
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=sapdev)(PORT=1527))(CONNECT_DATA=(SID=DEV)(GLOBAL_NAME=DEV.WORLD)(CID=(PROGRAM=D:\usr\sap\DEV\DVEBMGS03\exe\R3trans.exe)(HOST=SAPDEV)(USER=devadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 11-DEC-2009 22:14:28
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
===================================================
please help me to resolve the issue.
thanks.> Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Your Oracle version is unsupported and contains serious bugs.
Read the installation guide, it tells you to
- install the Oracle software delivered on the DVD (10.2.0.1)
- install the latest patchset
- install the latest interim patches
and then start the installation.
Download now the patches for 10.2.0.4 and the interim patches and install them.
Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection
Markus -
Customized Authorizations in SAP ISA Frame work
Hi All,
I am using SAP ISA Frame work in my project and displaying customized Authorizations in my Project and i want to add new Authorizations in my Project.
Please let me from where these authorization data is coming whether it is coming from back end or front end.
If it is front end from which file these data is coming.
I am expecting it is coming from some xml file and i would like to know from file name of xml.
regards,
sureshHi All,
Any suggestions please
Regards
G.s.naidu -
How to Integrate SAP with Solid works?
Hello Experts,
My customer is asking to do some research on integrating SAP with Solid works. I don't have any Prior experience on this. Can any one give me some inputs on below questions
1) How to Design the interface between SAP and Solid works?.
2) Is it better to Design our own Interface or better to Buy some third party tools?.
3) Please give me some best Third Party tools for this purpose?.
Thanks a lot in advance...
Regards,
Mohan.Hi,
...or Option 4, use the SAP - SolidWorks Integration. At the service marketplace at http://service.sap.com/plm or directly at http://service.sap.com/~sapidb/011000358700003638082001E/GEDAS_SOLIDWORKS.htm you can find more information about this SAP product.
Best regards,
Martin -
NW ABAP Sneak Preview and Mini SAP online license works again
The online license procedure for the NetWeaver ABAP Sneak Preview and Mini SAP systems at www.sap.com/minisap
works again.
Sorry for the inconvenience.
DirkI finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga -
Reg :SAP WEBDISPATCHER- disp+work stopped(turned from yellow to ash color)
Hi Experts,
When I started the SAP Instance , disp+work stopped in SAP MMC console.Hence I am not able to login to the SAP system(the error : sapdp00 broken).Database is MaxDB.Before adding DATA Volume,the server was working fine.Since the data area was full , I added a new volume and restarted the SAP server.From then on the error persist!..After starting SAP Instance,I also deleted the contents of dev_disp and dev_w0 file but faced the same error.I also executed the command load_systab for loading the system tables but then also the same error.
While starting SAP Instance I get the message as 'Database not available via R3trans'.
While executing the command R3trans -x or R3Trans -d: I get the following message::
This is R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
R3trans finished (0012).
Please help to resolve the issue.Hi Siva,
Below are details of trans.log::
4 ETW000 R3trans version 6.19 (release 711 - 22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 12.01.2012 - 12:21:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:46 2012 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 21 0.000102
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 39 0.000141
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 23 0.000164
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' ...
4 ETW000 37 0.000201
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so), hdl 0
4 ETW000 3775 0.003976
4 ETW000 [dev trc ,00000] Library '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' loaded
4 ETW000 29 0.004005
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 25 0.004030
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so' is "710.21", patchlevel (0.21)
4 ETW000 80 0.004110
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 23 0.004133
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/PIP/SYS/exe/uc/linuxx86_64/dbsdbslib.so
4 ETW000 28 0.004161
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 33 0.004194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=(nil))
4 ETW000 27 0.004221
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004238
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=7fff64a3e720)
4 ETW000 24 0.004262
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.004279
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.004296
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 34 0.004330
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=2aa9150)
4 ETW000 32 0.004362
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.004380
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.004394
4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 19 0.004413
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection:
4 ETW000 28 0.004441
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 31 0.004472
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=(nil)) 38 0.004510
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 710.21, patch 0.021 (Make PL 0.21)
4 ETW000 31 0.004541
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 23 0.004564
4 ETW000 [dev trc ,00000] (0.021) NUMC conversion corrected (note 1288313)
4 ETW000 27 0.004591
4 ETW000 [dev trc ,00000] (0.021) Write the action LOB_GET_LENGTH into ST05 trace (note 1288056)
4 ETW000 25 0.004616
4 ETW000 [dev trc ,00000] (0.021) Default value for max. input variables is 2000 (note 655018)
4 ETW000 25 0.004641
4 ETW000 [dev trc ,00000] (0.021) Profile parameter to define max. input variables (note 655018)
4 ETW000 25 0.004666
4 ETW000 [dev trc ,00000] (0.021) Lob locator memory management optimized (note 1280771)
4 ETW000 27 0.004693
4 ETW000 [dev trc ,00000] (0.021) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 25 0.004718
4 ETW000 [dev trc ,00000] (0.021) Input parameters for SQL statements increased (note 655018)
4 ETW000 26 0.004744
4 ETW000 [dev trc ,00000] (0.015) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 27 0.004771
4 ETW000 [dev trc ,00000] (0.013) Call dbprocedures from a different schema (note 1256862)
4 ETW000 26 0.004797
4 ETW000 [dev trc ,00000] (0.010) Stream compression not switchable (note 1245770)
4 ETW000 24 0.004821
4 ETW000 [dev trc ,00000] 12 0.004833
4 ETW000 [dev trc ,00000] -> init() 21 0.004854
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 40 0.004894
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 2b573315c010 (152016 bytes allocated)
4 ETW000 38 0.004932
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=2088000) : 2b5733182010 (2240032 bytes allocated)
4 ETW000 30 0.004962
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=304000) : 2b5733380010 (2544048 bytes allocated)
4 ETW000 33 0.004995
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 16a14540 (2560208 bytes allocated)
4 ETW000 30 0.005025
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 16a18680 (2592272 bytes allocated)
4 ETW000 27 0.005052
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 1433 0.006485
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 22 0.006507
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.7.4 BUILD 009-123-173-450
4 ETW000 4381 0.010888
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.7.6 BUILD 007-123-197-046
4 ETW000 26 0.010914
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.7.6.007 CL 197046
4 ETW000 40 0.010954
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 1 20 0.010974
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 20 0.010994
4 ETW000 [dev trc ,00000] SQLDBC supports Multiple Streams : 1 19 0.011013
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR KEEPALIVE : 1 17 0.011030
4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR COPY : 1 16 0.011046
4 ETW000 [dev trc ,00000] -> getNewConnection() 17 0.011063
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1728) : 16a2fa60 (2594016 bytes allocated)
4 ETW000 32 0.011095
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1168) : 16a30a50 (2595200 bytes allocated)
4 ETW000 103 0.011198
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 99 0.011297
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 30 0.011327
4 ETW000 [dev trc ,00000] -> connect() 40 0.011367
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 25 0.011392
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 76 0.011468
4 ETW000 [dev trc ,00000] Thu Jan 12 12:21:47 2012 1003812 1.015280
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
4 ETW000 33 1.015313
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=4294963288) 20 1.015333
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 27 1.015360
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a30a50, size=1168 (2594016 bytes allocated))
4 ETW000 79 1.015439
4 ETW000 [dev trc ,00000] close all opened locators of connection 0 51 1.015490
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a2fa60, size=1728 (2592272 bytes allocated))
4 ETW000 28 1.015518
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 17 1.015535
4 ETW000 [dblink ,00000] ***LOG BY2=>sql error -4008 performing CON 57 1.015592
4 ETW000 [dblink ,00000] ***LOG BY0=>POS(1) Unknown user name/password combination
4 ETW000 27 1.015619
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=b82ef8)
4 ETW000 31 1.015650
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 1.015667
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=7fff64a355f0)
4 ETW000 25 1.015692
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 30 1.015722
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=7fff64a35608)
4 ETW000 28 1.015750
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015769
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=7fff64a35560)
4 ETW000 25 1.015794
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 1.015813
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=7fff64a355b0)
4 ETW000 25 1.015838
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 16 1.015854
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] release memory of the SIBU buffers 73 1.015927
4 ETW000 [dev trc ,00000] release memory of the STATEMENT CACHE 19 1.015946
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a18680, size=32048 (2560208 bytes allocated))
4 ETW000 33 1.015979
4 ETW000 [dev trc ,00000] -> sdb_free(p=16a14540, size=16144 (2544048 bytes allocated))
4 ETW000 25 1.016004
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733380010, size=304000 (2240032 bytes allocated))
4 ETW000 25 1.016029
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b5733182010, size=2088000 (152016 bytes allocated))
4 ETW000 54 1.016083
4 ETW000 [dev trc ,00000] -> sdb_free(p=2b573315c010, size=152000 (0 bytes allocated))
4 ETW000 145 1.016228 -
SAP MMC Disp+work stopped
Hi,
We installed SAP Ecc6 + oracle 10g on windows 2003
After we restart the server SAP mmc Disp+work process to be stopped.
dev_w0 log file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 10 06:38:15 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 03
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 114
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 5572
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5572) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 15800 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06A40040, size: 4889440)
M DpShMCreate: allocated sys_adm at 06A40040
M DpShMCreate: allocated wp_adm at 06A42090
M DpShMCreate: allocated tm_adm_list at 06A45E48
M DpShMCreate: allocated tm_adm at 06A45E78
M DpShMCreate: allocated wp_ca_adm at 06E4F2B8
M DpShMCreate: allocated appc_ca_adm at 06E55078
M DpShMCreate: allocated comm_adm at 06E56FB8
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06ED7E78
M DpShMCreate: allocated gw_adm at 06ED7EB8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06ED7EE8
M DpShMCreate: allocated wall_adm at 06ED7EF0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 10 06:38:16 2009
M ThInit: running on host sapdev
M calling db_connect ...
C Prepending D:\usr\sap\DEV\DVEBMGS03\exe to Path.
C
C Thu Dec 10 06:38:17 2009
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 067755A8 0677AB44 0677A3CC
C Attaching to DB Server DEV (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 067755A8 0677AB44 0677A3CC
C Detaching from DB Server (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C Attaching to DB Server DEV (con_hdl=0,svchp=0677A318,srvhp=0678BF04)
C
C Thu Dec 10 06:38:18 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12518'
[dbsloci.c 11042]
B ***LOG BY2=> sql error 12518 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12518 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapdev_DEV_03 on host sapdev (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 10 06:38:18 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5572) [dpnttool.c 327]
R3trans -x
C:\Documents and Settings\devadm.SAPDEV>R3trans -x
This is R3trans version 6.14 (release 700 - 29.05.07 - 13:40:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_o
ra_tnsname = 'DEV'"
R3trans finished (0012).
C:\Documents and Settings\devadm.SAPDEV>
Please help me how to resolve my issue.
Thanks for your helptrans.log file
4 ETW000 R3trans version 6.14 (release 700 - 29.05.07 - 13:40:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.12.2009 - 06:56:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Dec 10 06:56:46 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 7667 0.007667
4 ETW000 [dev trc ,00000] using "D:\usr\sap\DEV\DVEBMGS03\exe\dboraslib.dll"
4 ETW000 35 0.007702
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 16 0.007718
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 25 0.007743
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.107)
4 ETW000 112 0.007855
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 24 0.007879
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 34 0.007913
4 ETW000 [dev trc ,00000] New connection 0 created 30 0.007943
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.007977
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 21 0.007998
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.008021
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.008053
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 572 0.008625
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 22719 0.031344
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 36 0.031380
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 5815 0.037195
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPDEV's password 34 0.037229
4 ETW000 [dev trc ,00000] Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 35 0.037264
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 31 0.037295
4 ETW000 [dev trc ,00000] 0 UTF8 1 03573F00 00339B64 003393EC
4 ETW000 109 0.037404
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 9649 0.047053
4 ETW000 [dev trc ,00000] Allocating server context handle 37 0.047090
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 56 0.047146
4 ETW000 [dev trc ,00000] Thu Dec 10 06:56:47 2009 57660 0.104806
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
4 ETW000 32 0.104838
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12518'
4 ETW000 26 0.104864
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12518 17783 0.122647
4 ETW000 [dev trc ,00000] Try to connect with default password 105 0.122752
4 ETW000 [dev trc ,00000] Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 28 0.122780
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 30 0.122810
4 ETW000 [dev trc ,00000] 0 UTF8 1 03573F00 00339B64 003393EC
4 ETW000 30 0.122840
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0358749C) 17 0.122857
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 25 0.122882
4 ETW000 [dev trc ,00000] Deallocating server context handle 0358749C 22 0.122904
4 ETW000 [dev trc ,00000] Allocating server context handle 19 0.122923
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=00339338,srvhp=0358749C)
4 ETW000 35 0.122958
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12518
4 ETW000 9351 0.132309
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12518'
4 ETW000 26 0.132335
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12518 16 0.132351
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12518 performing CON [dblink#3 @ 431]
4 ETW000 1695 0.134046
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12518: TNS:listener could not hand off client connection [dblink#3 @ 431]
4 ETW000 27 0.134073
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'" -
Hardware Requirements for the SAP SSM (pilot works) installation
Hi All,
Can any one please provide me with the information on hardware requirements for the SAP SSM (pilot works) installation.
Thanks in advance.
Anjum.I'm think if you can install Windows then enough RAM and Processor you have ....
In any case "the more the better" .
Regards. -
When will Sap Business One work under windows7
When will Sap Business One work under windows7
Hi,
B1 allready runs under Windows 7, but it is not supported. Anyway, Windows 7 will released in October, so please be patient. I dont think SAP will support software, what is only in beta or rc stadium.
Regards Steffen -
Com.sap.portal.appintegrator.sap doesn't work
Hi all,
I needed to change the file 'WinGuiRenderLayer.properties'
I found the par under 3 locations:
d:\usr\sap\SPD\jc00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap
d:\usr\sap\SPD\jc00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
d:\usr\sap\SPD\jc00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp
I changed the file in those locations (I removed the bak extension and restarted the server).
Also, I made sure that the pars/directory contains the jar files.
After I restarted the server the application integrator iviews doesn't work (Web Dynpro, Transaction...).
Before I did the changes, I backed up the original pars/directory.
Copying the original pars didn't help.
How can I solve this?
Portal is EP6.16
Attched exception details:
Date : 10/25/2007
Time : 13:56:51:765
Message : [PortalNode.fireEventOnNode.toEventListener] event=onNodeReadyEvent, target=com.company.Orders, operation failed
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.appintegrator.sap.WebDynpro
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.navigation.workAreaiView.doOnNodeReady(workAreaiView.java:238)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.navigation.workAreaiView.handleEvent(workAreaiView.java:356)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:178)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:685)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent of Portal Component com.sap.portal.appintegrator.sap.WebDynpro because: Linkage error while loading implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:234)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 41 more
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/appintegrator/AbstractIntegratorComponent
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@72f155]
Parent loader name: [sap.com/com.sap.portal.appintegrator.sap]
References:
not registered!
Resources:
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\classes
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\lib\com.sap.portal.appintegrator.sap_core.jar
The error occurred while trying to load "com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 45 more
Severity : Warning
Category : /System/Server
Location : com.sap.portal.portal
Application : sap.com/irj
Thread : SAPEngine_Application_Thread[impl:3]_27
Datasource : 6397450:D:\usr\sap\SPD\JC00\j2ee\cluster\server0\log\defaultTrace.trc
Message ID : 000E7F3049DE005C0000002100001C4000043D4FEE02FB46
Source Name : com.sap.portal.portal
Argument Objs : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.appintegrator.sap.WebDynpro
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.navigation.workAreaiView.doOnNodeReady(workAreaiView.java:238)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.navigation.workAreaiView.handleEvent(workAreaiView.java:356)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:178)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:685)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent of Portal Component com.sap.portal.appintegrator.sap.WebDynpro because: Linkage error while loading implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:234)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 41 more
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/appintegrator/AbstractIntegratorComponent
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@72f155]
Parent loader name: [sap.com/com.sap.portal.appintegrator.sap]
References:
not registered!
Resources:
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\classes
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\lib\com.sap.portal.appintegrator.sap_core.jar
The error occurred while trying to load "com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 45 more
Arguments : com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.appintegrator.sap.WebDynpro
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.navigation.workAreaiView.doOnNodeReady(workAreaiView.java:238)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.navigation.workAreaiView.handleEvent(workAreaiView.java:356)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:178)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:685)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent of Portal Component com.sap.portal.appintegrator.sap.WebDynpro because: Linkage error while loading implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:234)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 41 more
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/appintegrator/AbstractIntegratorComponent
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@72f155]
Parent loader name: [sap.com/com.sap.portal.appintegrator.sap]
References:
not registered!
Resources:
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\classes
D:\usr\sap\SPD\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\private\lib\com.sap.portal.appintegrator.sap_core.jar
The error occurred while trying to load "com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 45 more
Dsr Component : <Server Name>
Dsr Transaction : 5a4c6ec082f111dccf17000e7f3049de
Dsr User : <User>
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : /System/Server
Resource Bundlename :
Session : 44
Source : com.sap.portal.portal
ThreadObject : SAPEngine_Application_Thread[impl:3]_27
Transaction :
User : <User>
Thanks,
OmriSolved it.
This is what I did:
1) Took par from my production environment (same SP level)
2) Clear the par (by using 'Archive Remover')
3) Clear the pcd cache
4) Upload the par (redploy)\
5) Restart the portal
Thanks,
Omri -
Crystal Report orange link arrow to SAP B1 not working
Hello,
I couldn't find a way to insert the actual "arrow" icon into a Crystal report so I copied one from one of the Crystal Reports imbedded in SAP B1 9.0. I subsequently edited the hyperlink to point to the document number I wanted.
From the Format Editor dialog box, Hyperlink, the hyperlink website address is:
http://$b1$/link?table=OPCH&key=1
There was a formatting button to the right of the website address line. Clicking on it yielded a formula workshop dialog box that I edited as follows:
'http://$b1$/link?table=OPCH&key='+ToText({OPCH.DocNum},0,"","")
The Crystal Report runs fine in B1 and shows the link arrows. Hovering the cursor above the hyperlink in print preview yields the specific information for that record. For example, when the report shows A/P Invoice #4394 the screen shows a small pop-up with "http://$b1$/link?table=OPCH&key=4394". Clicking on the arrow brings up a window with a blank! A/P invoice with the cursor located in the "Vendor Invoice No." box (OPCH.NumAtCard field).
Why is this not working to bring up the correct A/P invoice? There are no errors indicated.
Thanks for any assistance.Thank you, Nagarajan.
Those instructions are exactly what I've done with my report. However, the instructions start with the phrase "manually insert link arrow into Crystal report". OK, I did a Google search on "insert link arrow" and "crystal" and "reports" and "SAP" and there was only ONE webpage with these words on the ENTIRE internet--the page you sent me to. Crystal reports online help has nothing relating to a "link arrow". If there's some special aspect of this link arrow that I'm missing, it sure is a secret because there's nothing out there on this subject. I guess I'll have to copy the graphic from previous reports each time I need to do this.
CORRECT ANSWER:
In any case, I was able to resolve the issue by changing the text in the formatting dialog box from OPCH.DocNum to PCH1.DocEntry and it worked. Why it worked is beyond me. Guessing seems to be the one defining feature of doing work with SAP B1. -
Required steps to add standard SAP field to Work Manager 6.0
Dear Agentry experts,
I need some help on how to add standard SAP backend fields to the Work Manager 6.0 application. The application is freshly setup and not yet customized apart from filters, so we are also new to develop it.
Specifically we want to add fields QMTXT and QMCOD from Notification Header. We have checked and the fields are activated in the backend configuration, so I hope there are no changes required to the backend. However, when checking the data in the ATE, the fields are currently not added / available in the Notification Collection.
I have searched this forum and found several pointers, but they deal with adding a full new field, and I want to keep changes limited. Can you please advise what specific steps I need to do on the Agentry / Eclipse side to close the gap between SAP backend and the Notification Collection. (I know how to add the fields to the UI if they are in the collection). Do we need to create custom Java Classes? Can I solve this by just Agentry configuration?
Thank you very much for your kind advice!Look at the attachment, diagram depicts a data flow across the systems. You have to extend Java code for the object your trying to enhance and plus you have to make necessary changes on Agentry side as well.
if you have access to Service Market place , check out SAP-WM-6.0-EnhancementsGuide.pdf document under Work Manager 6.0 documentation which describes the steps involved in enhancing application.
Alternatively you can also check this blog Syclo Customization Extension-First Steps.
Syclo Customization Extension-First Steps
Thanks
Manju.
Maybe you are looking for
-
Installation failed undetected CDROM
hi we have a small problem when installing Solaris 10 update11 on T5-2 server in short, we start the boot cdrom command but the installation stops in this step: Please specify the media from which you will install the Solaris Operating System.
-
At times I type in a site name on the command line which I want to visit. This goes into a file which is accessed by highlighting the triangle on the right side of command line. This file contains previous sites which were accessed in the past. How d
-
Is it possible to manage and copy all my files in my stolen iphone?
please help
-
Need help or someone to edit .fla file
Need help or someone to edit .fla file
-
Hello PP experts, We are developping a shortage report which explode any type of demand. Would you know the best way to fetch the planned independent requirements and especialy the uncomsumed portion which is visible in MD04? Is there a function prov