SAP BW - Data activation error

Hi,
I have loaded arround 3 million records into 0FI_GL_4 datasource and everything is ok in PSA but when I am activating the loaded data into DSO I am getting an strange error on some characters in a Text field  . Unfortunately I can't realize in which packet(s) in PSA error is and it's not in the packet I see in the error log.
I am not sure if it's a good idea to extend the valid characters list or not and how can I do this. By the way, loading this size of data and activating it taks me 1.5 hourse. Is there any way to load just a part of data to check which part of data cause the error?
<<Text removed by moderator>>

Hi,
Please check why you are getting this error.
There can be number of possibility.
1.Special character are coming
Please in RSKC put Capital_all.
2.If small letter are coming then either allow the small
character or write a routine to convert it into upper case.
Otherwise delete the request from data target and correct it in psa and laod it.
If you want to break the load in seperate part then please Run the DTP with filter and
Give different condition ie some date ranges.
Thanks,
saveen kumar
Edited by: saveen kumar on Nov 11, 2010 10:34 AM

Similar Messages

  • ODS data activation error system  SAP BI 7.0

    Hi Gurus,
    I am carrying out full load in a standard ODS.
    When I try activating the request,system is giving me the error message as given below.
    No SID found for value '%' of characteristic 0COND_CURR.
    I have also tried the option of transfer global settings in RSA1->source systems.
    Please help in this regard.

    Hello Gurus,
    Issue resolved
    For my requirement i changed info object 0currency -> General Tab page -> Transfer routine -> Created and written a code as follows
    If result = '%' .
    result = 'USD'.
    endif.
    This resolved my ODS data activation issue.
    Thanks a lot for all your help.

  • Dso data activation error

    Hi experts,
    During the activation of data in DSO I got an error, there is an invalid entry. There are almost 15 million records in this DSO I dont want to reload and activate them again because I am on quality server. I just want to keep these records as much as are active and want to report on them. I cannot change the request status to green as we do it in Cube. How can it be done.
    regards,
    ray

    Check the quality status of the request. and also verify the number of records added to Active table as this for UAT or testing purpose.
    Other wise just delete the data from DSO and filter out the invalid entries and then reload the data. or Load a selected data for one or two years for the testing purpose.
    Hope this helps.
    Regards,
    Reddy

  • Master Data activation error after transport

    Hi,
    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Any suggestion?
    Thanks
    Alberto

    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
    Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
    Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
    I tryed to re-transport but i have always the same error.
    I already gave you option-1 above. Here is my thinking.
    Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
    ext, run the RSRV test on the InfoObject in DEV.
    After you do this, collect this InfoObject in a new transport and move it to Test.
    I am not sure it wil solve the problem, but its worth a try.
    But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
    Uday-Ram Chamarthy

  • Urgent| Master data activation error

    Hi All,
    I am getting error in activating the master data. The error is in filling the SID tables.
    Actually I have added a new attribute in Master Data, now i want to make it as navigational attribute. But when i try to activate my master data it gives an error.
    But if we try to activate master data without making it was navigational (i.e. keeping as only display) the master data gets activated.
    Please help me in this as it is very urgent.
    Regards,
    Kshitij

    Hi,
    If your attribute characteristic you want to make NAV is brand new, first try to maintain its master manually with a value; activate the master data.
    then try to reactivate your NAV in the other characteristic.
    If this still doesn't work try the following
    1. keep the attr as display for the moment
    2. via menu Extra / DB Tables in RSD1, Fill attr SID table
    3. reactivate the IOBj
    hope this helps...
    let us know...
    Olivier.

  • [sap-bw] SAP HR data extraction errors....into BI 7.0 ...from ECC 6.0..

    Hi Gurus,
    We are doing HR data extraction with the following details:
    Cube: 0PT_C01 - Time and Labor
    data source: 0HR_PT_1 - Times from personal work schedule
    Records in ECC: 15mill +.
    "Init load with Data "is being loaded in packets of 40K records (400 packets approx).
    Each time we load (we tried reloading after deleting data and reinit) it is loading same records. But it is giving the following error. Surprisingly this error is coming for different packets in different loads. for ex: 1st time packet 6...2nd time packet 58....3rd time 122 etc.....it keeps changing...
    Processing end : Errors occurred
    Error when generating the update program
    Diagnosis
    An error occurred during program generation for InfoSource 0HR_PT_1 and
    InfoProvider 0PT_C01 . This may be extrapolated to incorrect update
    rules.
    Procedure
    Check and correct your update rules and then generate the update program
    again. You can find help on the error in the error log.
    We reactivated and verfieid update rules. But no use.
    Appreciate any kind of help.
    thanks in advance.
    J.

    Oscar,
    Thanks for the help.
    We tried the following one by one.
    1. Delete and recreate update rules.  To be frank....there is no CODING or complication in there...
         It did not work.
    2. Tried loading only to PSA.  It loaded 15mill records perfectly.  But when we tried updating target cube, 
        same story with many more errors.....earlier we had 10 packages failed out of 387.......
         this time almost every  alternate package is marked red and same error....update generating update
         program.....
    Hope somebody will come up with a solution.

  • Data activation error in LO

    Hello
    after i have gone thru t-code LBWE.. i clicked on maintaince tab.. then update overview is done.. after that i clicked on bw delta maintance queue.. there i didnt find any data sources over there..

    hi,
    it's likely that there aren't any entries there yet because you haven't initialized extraction of any deltas from BW. you must first extract a datasource in BW with the option 'Initialize Delta' in the infopackage.
    ryan.

  • TDMS data scrambling error: phase of the program is different than active phase of the project

    Hello Colleagues,
    wE are running TDMS 4.0, We  have been stuck at this phase in TDMS for the 'Start Data Scrambling /Convertion' for our activity. When trying to click on execute button of the said phase in the process tree, we are getting the error attached. I have searched for other KBA's as well as sapnotes for the error message number but there is no documentations for that error. I would like to ask if any of you have exprerience this error specifically when trying to do a scrammbling activity in TDMS? The error is unknown to us.
    Hoping for your responses. Thank you
    Regards,
    Meinard '

    Dear
    SAP TDMS Data scrambling options you can on
    http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000095308&_SCENARIO=01100035870000000202&_OBJECT=01100035870000
    This will help
    Reagrds…

  • Activation error while changing the data type of a field of a table

    hi friends,
    i am facing one problem while changing a data type of a field of a table.
    i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
      while changing to NUMC data type activation error is comming as below.
    Table is not yet classified                           
    Field ZTOTAL_COUNT: Type change                       
      ALTER TABLE is not possible                         
    Structure change at field level (convert table YQM32) 
    Check on table YQM32 resulted in errors   
    Table YQM32 could not be activated                       
    (E- Structure change at field level (convert table YQM32)
    plz suggest.i need to change the data type from char to numc.
    Thanks & Regards

    Hi Pabitra......
    From the SE11 change the table as u wanted and then from menubar select
    UTILITIES--> DATABASE UTILITY
    It will open database utility
    there u select the Activate and adjust database button.
    then the database table will get adjusted.
    just try it once.........
    Suresh......

  • Flat File Active Sync - Notify  admin incase of data processing errors

    Dear Friends,
    We have couple of Requirements to use OOTB flat file active sync adapter
    1. To read data from a flat file and update the records in Sun Identity Manager system
    2. Notify admin if there are any data processing errors while reading data from a flat file. The data processing errors can occur if there is an invalid data. for example, lets say the input flat file has 3 columns defined, but the file conatins records which has four values.
    firstname,lastname,email
    testfirst,testlast,[email protected],12345
    Req#1 is working fine. There are no issues with that.
    Req#2: if the file contains invalid data, i noticed that the active sync adapter throws an Array Index out of bound exception. so, we need to send an email notification to the admin whenever data processing errors occurs.
    I noticed that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to determine whether the data was read successfully or not.
    Please let me know if there are any configurations/customizations to me made on OOTB flat file active sync adapter to handle data processing errors and send email notifications to administrators.
    Appreciate your help
    Thanks
    Vijay

    Hi,
    We have same requirement that
    "Notify admin if there are any data processing errors from a flat file.
    The data processing errors can occur if there is an invalid data or account is locked etc..."
    In short notify admin if any error logged in Active sync Log file while active sync runs.
    Yes,I noticed same that whenever the data processing exception occurs, the active sync adapter stops processing records and the active sync input form was not triggered. Unless active sync form was triggered, it's very difficult to go ahead to meet the requirement.
    Please let me know if there are any configurations/customizations to me made on flat file active sync adapter to send email notifications to administrators.
    Thanks,
    Sudheer

  • SAP graphics data error

    For one the IAC component when i run it from Portal(SAP HTML Gui)  I am getting "SAP Graphics data not supported" error. Is there any property i should set in ITS. but when i run it as SAP Gui for windows it works fine. Did anyone encounter this error. Thanks for you help

    Hi,
    Is your problem solved? I am also facing same problem. Can u share the solution.
    Thanks and Regards,
    Amit

  • Data Assertion error while installting sap DB instance

    Hi Friends,
    Please help me to fix the following error...
    I have installed the Central Instance of IDES 4.7 Enterprise on window
    server 2003. There is no error encounter. Error comes when I am installing
    the database instance in that "PREPARE ORACLE NETWORK CONFIGURATION" . The
    error message is :
    "ERROR 2005-11-03 18:12:53"
    CJS-00081 Assertion failed: Lsnrctl: Parameter dbhome has to be a valid
    ORACLE_HOME.
    Best Regards,
    vinod

    HIi Buddy,
    sorry for the delay to your response.I got fixed that earlier issue  but now i'm getting similar kind of problem again while data base loading phase on DB instance installation.
    Configuration details:
    SAP 4.7 EE
    ORacle 10g server (FOr DB)
    PLease find the following log for that.Would highly appreciated your response.
    INFO 2008-04-20 11:52:23
    Processing of host operation t_HostInfo_SHARED succeeded.
    INFO 2008-04-20 11:52:35
    The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
    INFO[E] 2008-04-20 11:53:06
    Account group="intel\SAP_LDAP" does not exist. <#1>
    INFO[E] 2008-04-20 11:53:24
    Account group="intel\dbdevctl" does not exist. <#1>
    INFO 2008-04-20 11:56:59
    Copying file L:/SAP4.7EE/exp1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
    INFO 2008-04-20 11:56:59
    Creating file C:\SAPinst ORACLE SAPINST\DBSIZE.XML.
    INFO 2008-04-20 11:56:59
    Copying file system node L:\SAP4.7EE\exp1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
    INFO 2008-04-20 11:56:59
    Processing of all file system node operations of table tORA_filecopy succeeded.
    INFO 2008-04-20 11:57:01
    Copying file L:/SAP4.7EE/exp1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
    INFO 2008-04-20 11:57:01
    Creating file C:\SAPinst ORACLE SAPINST\DDLORA.TPL.
    INFO 2008-04-20 11:57:01
    Copying file system node L:\SAP4.7EE\exp1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
    INFO 2008-04-20 11:57:01
    Processing of all file system node operations of table tORA_filecopy succeeded.
    INFO 2008-04-20 11:57:06
    Moving file C:/SAPinst ORACLE SAPINST/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
    INFO 2008-04-20 11:57:06
    Moving file C:/SAPinst ORACLE SAPINST/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
    INFO 2008-04-20 11:57:06
    Removing file C:/SAPinst ORACLE SAPINST/orig_ddl_ora_tmp.tpl.
    INFO 2008-04-20 11:58:16
    Package table created
    PHASE 2008-04-20 11:58:44
    SAP Web Application Server
    PHASE 2008-04-20 11:58:44
    Request common parameters of SAP System
    PHASE 2008-04-20 11:58:44
    Create operating system accounts
    INFO 2008-04-20 11:58:45
    Copying file C:/SAPinst ORACLE SAPINST/keydb.xml to: C:/SAPinst ORACLE SAPINST/keydb.1.xml.
    INFO 2008-04-20 11:58:45
    Creating file C:\SAPinst ORACLE SAPINST\keydb.1.xml.
    INFO 2008-04-20 11:58:45
    Copying file C:/SAPinst ORACLE SAPINST/product.xml to: C:/SAPinst ORACLE SAPINST/product.1.xml.
    INFO 2008-04-20 11:58:45
    Creating file C:\SAPinst ORACLE SAPINST\product.1.xml.
    INFO 2008-04-20 11:58:45
    Copying file C:/SAPinst ORACLE SAPINST/oradbpar.xml to: C:/SAPinst ORACLE SAPINST/oradbpar.1.xml.
    INFO 2008-04-20 11:58:45
    Creating file C:\SAPinst ORACLE SAPINST\oradbpar.1.xml.
    INFO 2008-04-20 11:58:45
    Copying file C:/SAPinst ORACLE SAPINST/DBSIZE.XML to: C:/SAPinst ORACLE SAPINST/DBSIZE.1.XML.
    INFO 2008-04-20 11:58:45
    Creating file C:\SAPinst ORACLE SAPINST\DBSIZE.1.XML.
    INFO 2008-04-20 11:58:45
    Copying file C:/SAPinst ORACLE SAPINST/exportcds.xml to: C:/SAPinst ORACLE SAPINST/exportcds.1.xml.
    INFO 2008-04-20 11:58:45
    Creating file C:\SAPinst ORACLE SAPINST\exportcds.1.xml.
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:16
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    PHASE 2008-04-20 11:59:17
    Request operating system user information
    INFO 2008-04-20 11:59:18
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1820834764-1610704591-2651201479-500' on host 'intel'!
    INFO 2008-04-20 11:59:18
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1820834764-1610704591-2651201479-500' on host 'intel'!
    INFO 2008-04-20 11:59:18
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1820834764-1610704591-2651201479-500' on host 'intel'!
    INFO 2008-04-20 11:59:19
    Evaluating all 'tNT_RegistryEntries' table rows succeeded.
    WARNING 2008-04-20 11:59:21
    Error 1332 (No mapping between account names and security IDs was done.
    ) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
    INFO 2008-04-20 11:59:22
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:22
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:23
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:24
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:25
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:26
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:27
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:28
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:29
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:30
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:31
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:32
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:33
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:34
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:35
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:36
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:37
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:38
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:39
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:40
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:41
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:42
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:43
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:44
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:45
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:46
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:47
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2008-04-20 11:59:48
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2008-04-20 11:59:48
    Adapt filesystem
    PHASE 2008-04-20 11:59:48
    Prepare check/adapt SAP instance filesystem
    INFO 2008-04-20 11:59:49
    File system node D:\usr\sap exists.
    INFO 2008-04-20 11:59:49
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap/DEV exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap/tmp exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/tmp exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/EPS exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/EPS/in exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/EPS/out exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/EPS/log exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/bin exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/buffer exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/cofiles exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/data exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/etc exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/log exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    File system node D:\usr\sap\trans/sapnames exists already. Nothing to do.
    INFO 2008-04-20 11:59:50
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-04-20 11:59:51
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2008-04-20 11:59:52
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    PHASE 2008-04-20 11:59:52
    Extract archives
    INFO 2008-04-20 11:59:53
    Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
    PHASE 2008-04-20 11:59:54
    Extract SAP System kernel archives
    INFO 2008-04-20 11:59:57
    Creating file C:\SAPinst ORACLE SAPINST\SAPMMC.SAR.log.
    INFO 2008-04-20 11:59:57
    .\sapcar.exe -xvgf L:/SAP4.7EE/sapinst/NT/I386/MMC/SAPMMC.SAR, -R C:\SAPinst ORACLE SAPINST succeeded. (See output in './SAPMMC.SAR.log'.)
    INFO 2008-04-20 11:59:58
    While copying node C:/SAPinst ORACLE SAPINST/sapmmc.dll to J:\WINDOWS\system32/sapmmc.dll: source is not newer than the target. Nothing to do.
    INFO 2008-04-20 11:59:58
    While copying node C:/SAPinst ORACLE SAPINST/sapmmcada.dll to J:\WINDOWS\system32/sapmmcada.dll: source is not newer than the target. Nothing to do.
    INFO 2008-04-20 11:59:58
    While copying node C:/SAPinst ORACLE SAPINST/sapmmcdb6.dll to J:\WINDOWS\system32/sapmmcdb6.dll: source is not newer than the target. Nothing to do.
    INFO 2008-04-20 11:59:58
    While copying node C:/SAPinst ORACLE SAPINST/sapmmcinf.dll to J:\WINDOWS\system32/sapmmcinf.dll: source is not newer than the target. Nothing to do.
    INFO 2008-04-20 11:59:58
    While copying node C:/SAPinst ORACLE SAPINST/sapmmcms.dll to J:\WINDOWS\system32/sapmmcms.dll: source is not newer than the target. Nothing to do.
    INFO 2008-04-20 11:59:58
    Processing of all file system node operations of table t_SAPComponent_Archives_Copy_SHARED succeeded.
    INFO 2008-04-20 12:00:02
    Creating file C:\SAPinst ORACLE SAPINST\DBATOOLS.SAR.log.
    INFO 2008-04-20 12:00:03
    .\sapcar.exe -xvgf L:/SAP4.7EE/sapinst/NT\I386\DBATOOLS.SAR, -R D:\usr\sap\DEV\SYS\exe\run succeeded. (See output in './DBATOOLS.SAR.log'.)
    INFO 2008-04-20 12:00:04
    Evaluating all 'tNT_RegistryEntries' table rows succeeded.
    INFO 2008-04-20 12:00:05
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2008-04-20 12:00:05
    Create service ports
    PHASE 2008-04-20 12:00:06
    Generate instance profiles
    PHASE 2008-04-20 12:00:06
    Versionize default profile, instance profile and start profile
    INFO 2008-04-20 12:00:07
    Processing of all file system node operations of table t_SAPComponent_Profiles_FORMS_SHARED succeeded.
    INFO 2008-04-20 12:00:08
    Processing of adapt operation t_SAPComponent_Profiles_SHARED succeeded.
    INFO 2008-04-20 12:00:10
    Creating file C:\SAPinst ORACLE SAPINST\lsnrctl.log.
    INFO 2008-04-20 12:00:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:00:11
    Output of J:\oracle\ora92/bin/lsnrctl is written to the logfile lsnrctl.log.
    INFO 2008-04-20 12:00:11
    Running the command "J:\oracle\ora92/bin/lsnrctl 'stop' 'LISTENER'" finished with returncode 0. Output:
    INFO 2008-04-20 12:00:11
    Creating file C:\SAPinst ORACLE SAPINST\listener.tpl.
    INFO 2008-04-20 12:00:11
    Copying file J:/oracle/ora92/network/admin/listener.ora to: J:/oracle/ora92/network/admin/listener.1.ora.
    INFO 2008-04-20 12:00:11
    Creating file J:\oracle\ora92\network\admin\listener.1.ora.
    INFO 2008-04-20 12:00:11
    Moving file J:/oracle/ora92/network/admin/listener.ora to: \s20k..2.
    INFO 2008-04-20 12:00:11
    Moving file C:/s20k. to: J:\oracle\ora92/network/admin/listener.ora.
    INFO 2008-04-20 12:00:11
    Removing file C:/s20k..2.
    INFO 2008-04-20 12:00:11
    Creating file C:\SAPinst ORACLE SAPINST\tnsnames.tpl.
    INFO 2008-04-20 12:00:11
    Copying file J:/oracle/ora92/network/admin/tnsnames.ora to: J:/oracle/ora92/network/admin/tnsnames.1.ora.
    INFO 2008-04-20 12:00:11
    Creating file J:\oracle\ora92\network\admin\tnsnames.1.ora.
    INFO 2008-04-20 12:00:11
    Moving file J:/oracle/ora92/network/admin/tnsnames.ora to: \s20k.1.2.
    INFO 2008-04-20 12:00:11
    Moving file C:/s20k.1 to: J:\oracle\ora92/network/admin/tnsnames.ora.
    INFO 2008-04-20 12:00:11
    Removing file C:/s20k.1.2.
    INFO 2008-04-20 12:00:11
    Copying file J:/oracle/ora92/network/admin/sqlnet.ora to: J:/oracle/ora92/network/admin/sqlnet.1.ora.
    INFO 2008-04-20 12:00:11
    Creating file J:\oracle\ora92\network\admin\sqlnet.1.ora.
    INFO 2008-04-20 12:00:11
    Removing file J:/oracle/ora92/network/admin/sqlnet.ora.
    INFO 2008-04-20 12:00:11
    Creating file J:\oracle\ora92\network\admin\sqlnet.ora.
    INFO 2008-04-20 12:00:14
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-04-20 12:00:14
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\saptrace.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/saptrace with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\saptrace\background.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/saptrace/background with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\saptrace\usertrace.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/saptrace/usertrace with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapreorg.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapreorg with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\saparch.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/saparch with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory J:\oracle\DEV\oraarch.
    INFO 2008-04-20 12:00:16
    Creating file system node J:\oracle\DEV/oraarch with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapcheck.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapcheck with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapbackup.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapbackup with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\origlogA.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\origlogA with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\mirrlogA.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\mirrlogA with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\origlogB.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\origlogB with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\mirrlogB.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\mirrlogB with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata1\cntrl.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\sapdata1\cntrl with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\saparch\cntrl.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\saparch\cntrl with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\origlogA\cntrl.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV\origlogA
    cntrl with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-04-20 12:00:16
    File system node D:\oracle\DEV/sapdata1 exists already. Nothing to do.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata2.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata2 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_2.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_2 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_3.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_3 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_4.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_4 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_5.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_5 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_6.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_6 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_7.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_7 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_8.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_8 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_9.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_9 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_10.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_10 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_11.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_11 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_12.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_12 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_13.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_13 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_14.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_14 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_15.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_15 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_16.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_16 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_17.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_17 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata4\dev_18.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata4\dev_18 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_2.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_2 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_3.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_3 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_4.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_4 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_5.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_5 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_6.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_6 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_7.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_7 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_8.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_8 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_9.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_9 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\dev620_10.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\dev620_10 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata1\devusr_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata1\devusr_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata2\roll_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata2\roll_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata3\temp_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata3\temp_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Creating directory D:\oracle\DEV\sapdata1\system_1.
    INFO 2008-04-20 12:00:16
    Creating file system node D:\oracle\DEV/sapdata1\system_1 with type DIRECTORY succeeded.
    INFO 2008-04-20 12:00:16
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-04-20 12:00:17
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2008-04-20 12:00:18
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2008-04-20 12:00:20
    Creating file J:\oracle\ora92\database\initDEV.ora.
    INFO 2008-04-20 12:00:24
    Creating file J:\oracle\ora92\database\initDEV.sap.
    INFO 2008-04-20 12:00:27
    Copying file L:/SAP4.7EE/sapinst/NT/COMMON/INSTALL/INITSID.DBA to: J:\oracle\ora92/database/initDEV.dba.
    INFO 2008-04-20 12:00:27
    Creating file J:\oracle\ora92\database\initDEV.dba.
    INFO 2008-04-20 12:00:29
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:00:30
    Moving file J:/oracle/ora92/database/initDEV.ora to: orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:00:30
    Moving file C:/SAPinst ORACLE SAPINST/changed_init_ora_tmp.txt to: J:\oracle\ora92\database\initDEV.ora.
    INFO 2008-04-20 12:00:30
    Removing file C:/SAPinst ORACLE SAPINST/orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:00:31
    Creating file C:\SAPinst ORACLE SAPINST\oradim.log.
    INFO 2008-04-20 12:00:36
    See 'J:\oracle\ora92/bin/oradim -new -sid DEV -STARTMODE auto' output in 'C:\SAPinst ORACLE SAPINST\oradim.log'.
    INFO 2008-04-20 12:00:36
    'J:\oracle\ora92/bin/oradim -new -sid DEV -STARTMODE auto' returned with '0'.
    INFO 2008-04-20 12:00:38
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:00:41
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:00:48
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:01:51
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:01:53
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:03:09
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:03:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:14
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:17
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:20
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:23
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:25
    Moving file J:/oracle/ora92/database/initDEV.ora to: orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:09:25
    Moving file C:/SAPinst ORACLE SAPINST/changed_init_ora_tmp.txt to: J:\oracle\ora92\database\initDEV.ora.
    INFO 2008-04-20 12:09:25
    Removing file C:/SAPinst ORACLE SAPINST/orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:09:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:09:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:10:55
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:10:57
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:12:21
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:12:24
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:13:48
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:13:51
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:15:16
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:15:19
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:16:42
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:16:44
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:18:07
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:18:09
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:19:33
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:19:35
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:20:59
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:21:02
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:22:24
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:22:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:23:51
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:23:54
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:25:16
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:25:19
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:26:42
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:26:45
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:28:08
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:28:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:29:36
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:29:39
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:31:03
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:31:06
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:32:31
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:32:34
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:33:59
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:34:01
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:35:04
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:35:07
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:36:32
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:36:34
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:38:00
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:38:02
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:39:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:39:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:40:53
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:40:56
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:42:21
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:42:24
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:43:50
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:43:52
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:45:17
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:45:19
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:46:44
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:46:47
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:48:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:48:14
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:13
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:16
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:21
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:24
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:55
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:49:58
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:02
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:04
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:08
    Moving file J:/oracle/ora92/database/initDEV.ora to: orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:50:08
    Moving file C:/SAPinst ORACLE SAPINST/changed_init_ora_tmp.txt to: J:\oracle\ora92\database\initDEV.ora.
    INFO 2008-04-20 12:50:08
    Removing file C:/SAPinst ORACLE SAPINST/orig_init_ora_tmp.txt.
    INFO 2008-04-20 12:50:09
    Copying file C:/SAPinst ORACLE SAPINST/lsnrctl.log to: C:/SAPinst ORACLE SAPINST/lsnrctl.1.log.
    INFO 2008-04-20 12:50:09
    Creating file C:\SAPinst ORACLE SAPINST\lsnrctl.1.log.
    INFO 2008-04-20 12:50:09
    Removing file C:/SAPinst ORACLE SAPINST/lsnrctl.log.
    INFO 2008-04-20 12:50:09
    Creating file C:\SAPinst ORACLE SAPINST\lsnrctl.log.
    INFO 2008-04-20 12:50:09
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:09
    Output of J:\oracle\ora92/bin/lsnrctl is written to the logfile lsnrctl.log.
    WARNING 2008-04-20 12:50:11
    Running the command "J:\oracle\ora92/bin/lsnrctl 'status' 'LISTENER'" finished with returncode 3. Output:
    INFO 2008-04-20 12:50:11
    Copying file C:/SAPinst ORACLE SAPINST/lsnrctl.log to: C:/SAPinst ORACLE SAPINST/lsnrctl.2.log.
    INFO 2008-04-20 12:50:11
    Creating file C:\SAPinst ORACLE SAPINST\lsnrctl.2.log.
    INFO 2008-04-20 12:50:11
    Removing file C:/SAPinst ORACLE SAPINST/lsnrctl.log.
    INFO 2008-04-20 12:50:11
    Creating file C:\SAPinst ORACLE SAPINST\lsnrctl.log.
    INFO 2008-04-20 12:50:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:11
    Output of J:\oracle\ora92/bin/lsnrctl is written to the logfile lsnrctl.log.
    INFO 2008-04-20 12:50:13
    Running the command "J:\oracle\ora92/bin/lsnrctl 'start' 'LISTENER'" finished with returncode 0. Output:
    INFO 2008-04-20 12:50:14
    Copying file L:/SAP4.7EE/sapinst/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
    INFO 2008-04-20 12:50:14
    Creating file C:\SAPinst ORACLE SAPINST\oradbusr.sql.
    INFO 2008-04-20 12:50:15
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:18
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    PHASE 2008-04-20 12:50:21
    Database Load
    INFO 2008-04-20 12:50:29
    Task files created
    INFO 2008-04-20 12:50:23
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:24
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:25
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:27
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:28
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:29
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:30
    Command files created
    ERROR 2008-04-20 15:52:59
    MSC-01015  Process finished with error(s), check log file C:\SAPinst ORACLE SAPINST/SAPSSEXC.log
    ERROR 2008-04-20 18:52:47
    FJS-00012  Error when executing script.
    INFO 2008-04-20 12:50:32
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:32
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 12:50:32
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 15:53:06
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 17:05:48
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 17:53:02
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:03:04
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:23:07
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:35:09
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:39:11
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:40:12
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:41:13
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:42:13
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-04-20 18:42:44
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    Best Regards,
    vinod

  • DSO data Activation Time out-DATABASE ERROR-440

    Hello all,
    We are getting  error in one of our standard DSO during activation -Error-Process 000001 did not confirm within the permitted time period,we repeated process chain ,we got the same error,we activated manually -we got the same error, I need to mention that we only have 3278 records which should not take more than few seconds-minutes to activate. we reset RSODSO_SETTINGS wait time by increasing still did do it , we changed data package 10,000 ,50,000 but it didn't correct the error, we even change DSO  SID generation setting during activation to never create SID ,it didn't correct the error, we reactivated DSO,we indexed the table both new and active table but we are getting the same error, in a SM21 we are getting error DATABASE ERROR -440  [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAMED > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND... DBA reorg and did some other things but we are still getting the same error and the are not sure what the procedure DSO_VERSION is ,Any body have any idea what that procedure is and why we are getting that in sm21 during one DSO data activation?  Has anybody had this kind of experience before? by the way we have researched on google SCN and nothing close to our scenario. By the way we ran the activation with the different settings both in dialog and background.We also got error  Background process BCTL_4Z81MSY8311QNTKRYGRDYVFXY terminated due to missing confirmation ...Any suggestions will be of great help and points will be awarded....
    Thank you.

    Error in Sm21-
    04:57:20 BTC  036 810 PRGRAU0                   BY  2 Database error -440 at EXE
    04:57:20 BTC  036 810 PRGRAU0                   BY  0 > [IBM][CLI Driver][DB2] NO AUTHORIZED PROCEDURE NAME
    04:57:20 BTC  036 810 PRGRAU0                   BY  0 > DSO_VERSION HAVING COMPATIBLE ARGUMENTS WAS FOUND
    04:57:20 BTC  036 810 PRGRAU0                   BY  1 Database error -440
    Background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA terminated due to missing
    confirmation
    Message no. RSODSO_PROCESSING041
    Diagnosis
    The confirmation from the background process BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
    did not occur within the set time. It was thus ended by the system.
    System Response
    Background process: BCTL_4Z9BTOI3XPN2XB0VL9IUZ08ZA
    Number: 1
    Procedure
    Check the package size for the application to be processed or change the
    package size.

  • ODS data Activation with error BRAIN060

    Hi guys,
    I have the next situation with the data activation in a ODS.  The ODS have the extraction completed, but when I try to do the manual activation a error BRAIN 060 is caused:
    1st.:
    Error getting SID for ODS object ZPUR_OP
    Message no. RSM1187
    2d:
    Value 'AYD CALPDS' (hex. '415944A043414C504453') of characteristic 0COORDER contains invalid characters
    Message no. BRAIN060
    Diagnosis
    The following standard characters are valid in characteristic values as default:
    !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
    Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
    You are trying to load the invalid characteristic value 1. (hexidecimal representation 415944A043414C504453).
    3st:
    Error when assigning SID (details in long text)
    Message no. RSDRO303
    System response
    Request: REQU_4C4G67RXIW7C3PV88B1BMB4ZX
    Data package: 000795
    Data record: 12.153
    InfoObject: 0COORDER
    The error is the master data and the assigment SID; but the extraction did without PSA; only datatarget.  With this I can´t modify the data erroneus.
    Is possible force the activation or I can apply other correction that not be repeat the extraction?
    Please,I need your quick collaboration.
    Regards,
    Jeysi

    Hi Jeysi,
    You can make the changes in ODS. If this request is not activated yet, in this case this data is available in your New Table of the ODS. You can make the changes in this data directly in this new Table.
    After doing this changes it will allow to activate this request. Also you can find this New Table in object configuration.
    Or
    Go to Manage of ODS -> Go to Contents TAb-> In this Button at bottom with New Data. Please go through this and make the changes in New Data.
    But prior doing this changes please check / analyse the reason correctly as per business requirement. Suggest them to take care of this in future to end users.
    This will deffinately helps you.
    Regards,
    Mahesh

  • Activation Error in ODS - Record mode 0 unknown (data record REQU_4DPGJKCKN

    I created a generic extractor in R3 with a generic delta.  In BW, my delta init loads with no errors but when I activate the data in the ODS, I get the activation error.
    "Record mode 0 unknown (data record REQU_4DPQ31IK7WM9OTK26S5JMJ6LM/000001/"
    I  searched SDN but didn't found anything, and I searched help but only found general information about 0recordmode.
    Can someone provide a solution and/or some more detailed information about the error message?
    Thanks

    Hello,
    When you have created the InfoSource for the generic datasource, have you added field 0RECORDMODE to the InfoSource? When loading data to a ODS, 0RECORDMODE is essential.
    The InfoObject is usually mapped to ROCANCEL (Indicator: Cancel Data Record) field of the extractor. This field is usually present in Standard extractors. But even if the field is not present in your extractor, add it to InfoSource Communication structure and leave it unmapped in transfer rules.
    I think this might solve the problem.
    Regards,
    Pankaj

Maybe you are looking for

  • To get the tree structure using html

    how to get tree structure using html?is there any commands in html to get the tree structure

  • How to make WF notification auto approved

    Hi, We have implemented Absence Management and using generic approval process. we have 2 levels of approvals first level Supervisor and second level approver is HR Manager. IF Supervisor doen't approve the nitification in a week then it should get ap

  • How to view "recent searches" in safari on ipad (ios7)

    Since the introduction of the unified search field, I can no longer view recent searches (previously accessed by clicking on the magnifying glass on the search field).  Note that I am not interested in the browsing history, I want to see a list of re

  • HT201210 Can't update iPhone 5 to the latest software 6.0.1

    Trying to update new iPhone 5 to iOS 6.0.1. All works fine except during the required auto backup it starts to back up and they stops saying either that the phone had disconnected (which is hasn't) or that the backup has failed. In both situations it

  • No location options in Reminders

    Upgraded my iPhone 4 to iOS 5.0 last night without any upgrade issues. Noticed today that the Reminder application doesn't have the option to set a location based reminder and that "Reminder" isn't listed in the Location Services settings...any sugge