SAP BW HANA NLS with SAP IQ - ODBC driver / DLL error in configuration

We have a SAP BW 7.4 system running on HANA and we had configured SAP IQ 16 as NLS on this system for performing a PoC. The configuration was successful and working but after few weeks this was giving error. We tried creating new database connection but with no success.
When we test the database connection by SE38 -> ADBC_TEST_CONNECTION, we get the below error -
The screenshot of the trace file showing the detail error is below -
Refer below the screenshot showing errors from RSDANLCON -
We have tested the ODBC connection on the IQ database server and there seems no issue there. If anyone has come across this error earlier and have resolution, then please advise.

We had also configured NLS on our SAP BW 7.31 system (non-HANA) using the same IQ server (v 16), and this configuration was also successful and working but since last 2 weeks or so even that this is giving similar error. We tried creating new database connection and test but there is no success. Sharing the screenshot from SAP BW 7.31 system below -
SE38 -> ADBC_TEST_CONNECTION shows error as below -
The screenshot of the trace file showing the detail error is below -
Here the error is somewhat different and mentions the Sybase IQ 16 version is not supported. But this same connection was working when configured earlier.
Refer below the screenshot showing errors from RSDANLCON -
This could also be because of some mismatch in library files but I had checked with our Basis team and there was no upgrade to BW 7.31 system after the NLS was configured successfully earlier (which was just 4 weeks back). So any help for this scenario is also appreciated.

Similar Messages

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Oracle ODBC Driver Specifc Error Codes

Dear All,
I'm currently working in a migration assignment.I'm looking for a Technical document which consists error codes specific to Oracle ODBC Driver(ver.9.00.11.00).Any help in this regard will be appreciated.
Thanks & Regards,
Sam

There shouldn't be any Oracle ODBC Driver specific error codes. When you're talking about ODBC and error codes, there are two possibilities-
1) You're looking at the SQLState return codes. These are part of an ISO standard (they're more than happy to sell you a copy) and are documented in the ODBC Programmer's Reference from Microsoft as well as most decent ODBC guides.
2) You're looking at the Oracle specific error codes that are returned as the error text in ODBC. These (potentially) depend on the version of the database you're connecting to, rather than the version of the client software you have, and are covered in Oracle's error message manual available at tahiti.oracle.com
Justin

Connect SAP HANA Studio with SAP HANA One Instance Reg 70

Hello,
i have already create an instance and set all passworts in Management One Console.
If i want to add a new system in Hana studio a got an error message: "Database connection is not available"
SAPControl request failed. Cannot retrieve JDBC connection for: ...
com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for more details.
at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:295)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:238)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:84)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sap://xxx.eu-west-1.compute.amazonaws.com:30015 [Cannot connect to host exxx4.eu-west-1.compute.amazonaws.com:30015 [Connection timed out: connect], -813.].
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:219)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:186)
at com.sap.db.jdbc.Driver.connect(Driver.java:238)
at com.sap.ndb.studio.jdbc.JDBCPlugin$3.run(JDBCPlugin.java:590)
I must add, that i test it in the firm's intranet. So we have diverse firewalls. What firewall settings has our IT department change, for enabling the database connection?
Hope you can help me.
CT

Not related to UI Development Toolkit for HTML Developer Center. Moved to SAP HANA Developer Center community.
Regards, Mike (Moderator)

Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

Installation of SAP Netweaver 7.0 with SAP R/3 Enterprise 4.70 backend

Hello everybody,
I need to install an SAP Netweaver 7.0 environment for a client who is currently using SAP R/3 Enterprise 4.70. However, I couldn't find any document about the compatibility of the two.
Does anybody know if it is possible to connect these versions of Netweaver and R/3?
Could you please tell me where I could get some documentation about it (for example : intallation guide of netweaver with SAP R/3 4.7 or docs about netweaver and R/3 4.7 connectivity) ?
Thank you.
Stan

OK thanks.
The final need is to be able to create purchase requisitions or purchase orders in the enterprise portal with a simplified user interface for users who are not used to working with SAP and don't have the SAP client installed on their computer.
So they will use their web browser to connect to the portal and create the requisition for example. Then we wan't the data to be stored in the R/3 backend et other users will validate the requisition and deal with the rest of the process.
The second step will be to study the benefits we could get from installing Adobe document services and creating an adobe interactive form to simplify even more the user interface. The users would then fill the data for the purchase order or requisition directly in the form that looks like the form they get when printing.
I saw that we have to install the "R/3Plug-In 2004.1" in the backend to use our SAP 4.7 as a data source for the Portal.
Do you know if there are other steps to perform in the backend before we link it to the portal ?
Thank you
Stan

Integrate SAP ERecruiting Newhire/Rehire with SAP HCM Process

How to integrate SAP ERecruiting Newhire and Rehire with SAP HCM Process and forms using SAP NetWeaver PI 7.3 , Could any one give me steps or docs..

I think standard content available in market place if no then try with Web service (sender side) and Proxy in receiver side,

SAP E - Recruitment Integration with SAP PA ES Module

Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinM

Aswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna

Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

Hi all,
I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
SAP ECC 6.0 7.00 - 64bit
SAP ECC 6.4 7.01 - 64bit
SAP BI 7.1 7.01 - 64bi
I was wondering whether there are compatibility issues with any of the above mentioned versions.
Your feedback is appreciated.
Regards,

Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
[http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0

Hi Friends,
We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0 which is running in Windows 2008 Server and with SQL Server 2008 as its database.
I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
Kindly provide your valuable inputs.Looking forward to hear from you soon.
Thanks and Regards,
Vimal

Hello Vimal
regarding this software a number of publications are available:
http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
Here you will find the list of rerequisites etc. and the integration e.g. into SAP EHS Management is explained.
In any case. The SAP marketplace is the right place to take a look regarding prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
With best regards
C.B.

ESS XSS delivered with SAP ERP 2004 compatible with SAP 4.7?

Hi,
I was wondering if anyone has sought to implement the latest version of ESS (for SAP ERP 2004) for a SAP 4.7 backend? Is this at all compatible?
I have implemented ESS 50.4 on EP6 SR1 and this works fine with a backend SAP 4.7, but I am interested in knowing whether the newer version of ESS (non-ITS) is compatible with SAP 4.7. I am thinking not, but any experiences of others would be useful.
Regards
John Moy

Hi John,
If you are concerned about ITS rendition of WEBGui content, then according to OSS Note# <b>197746</b> the WAS6.4 Integratred ITS should do the job.
Yet, till I get my hands wet with custom ESS 50.4 ITS templates upgraded to EP6.4 SP9, then I can assure the results.
Regards,
AAAttar
<b>OSS Note# 197746...</b>
"As of release 6.40 of SAP Web Application Server the SAP Web AS Kernel includes a subcomponent called "SAP Integrated ITS". This component is the successor of the "standalone" ITS releases up to and including release 6.20. Since this component is integrated into SAP Web AS the rules that apply to the Kernel also apply to the SAP Integrated ITS.
Information on patches and maintenance periods for SAP Web AS Kernel can be found in OSS notes 19466 and 138704.
The Integrated ITS can only be used to run SAP GUI for HTML and IACs of the SAP System it is part of. Therefore there are no longer questions in regards to downward or upward compatability. Since the Integrated ITS consists of executables being part of the Kernel and templates, MIMES, etc. being part of SAP_BASIS you can only use the Integrated ITS if you have both SAP Web AS Kernel 6.40 and SAP_BASIS 6.40 or higher installed."

Details of SAP. Net Connectors with SAP

Hi,
Does SAp.Net Connector Supports mySAP ECC 5.0 Version are else any additional software or upgrade or any pulgins to be added.
Can any one send me the Flow chart of how to connect SAP.Net connector with SAP, I ment the Process Methodology.
Any suggestions will be much Appreciated.
Thanks & Regds.
Ramesh

Hi Ramesh,
U ll find all details for the implementaion of SAP.Net Connector in this link...
http://help.sap.com/saphelp_nw04/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
The following link gives u the programmers reference:
http://help.sap.com/saphelp_nw04/helpdata/en/27/3fef6927ad044da62dee1b86d68ec2/frameset.htm
and u can use this link:(esp from page 4)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb4dc990-0201-0010-429a-bf43852a6895
regards,
Manikandan R

SAP GUI not working with SAP* and DDIC default passwords

Hi SAP Guru's ,
at last I installed the SAP ECC6.0 on Windows 2003 (stand alone) with Oracle 10G database.
I installed the SAP GUI , when I am trying to loging from SAP GUI clients 000 and 001 with SAP* and DDIC user accounts I am naot able to login . please give me the how to configure this .
thanks in advance
Edited by: srinivas kaveti on Apr 4, 2008 9:16 PM

Hi Srinivas,
You should set "login/no_automatic_user_sapstar=0", in the SAP profile. With ECC 6.0, default sapstar user deactivated. You can take a look at OSS note #68048, for detailed information.
Best regards,
Orkun Gedik

Oracle Adapter for SAP that supports Integration with SAP 6.0??

Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi Bhushan

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

SAP XI connection path with SAP

Hi,
Anyone can elaborate about the path of SAP XI with SAP or any other Application S/w. How to configure with SAP SRM 7.0 (SUS).

Hello Sanjit,
This thread will be really helpful to you.please check
SRM XI scenario
Regards,
Amit Barnawal

SAP BW HANA NLS with SAP IQ - ODBC driver / DLL error in configuration

Similar Messages

Maybe you are looking for