SAP BW Key figures displayed 100 times larger than it should

Dear all,
I'm using Crystal Reports 2008 SP2 und SAP Intetegration Kit X3.1 SP2 to create a report upon a BW Query (7.01). Several key figures are displayed exactly 100 times larger than it should. Only the formatted value is displayed correctly.
Is anyone familiar to this phenomenon?
best regards,
madadm

Solved:
the regional settings of the client machine have to match the servers' .This have been hard times...

Similar Messages

The use of restricted key figures in real time scenario

Hi all,
Please let me know the use of restricted key figures in real-time business scenarios....plz someone explain it with <b><u>example</u></b>...
Also, can restricted keys be defined globally with same infoprovider...???????????
Your response is thankfully acknowledged,
thanks and regards,
shalini.

Hi,
You can restrict the key figures of an InfoProvider for reuse by selecting one of more characteristics. The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures or key figures that are already restricted. Which means you can define and use them globally in reporting for a particular infoprovider.
Example:
You have to show the sales for different product typessay 1, 2, 3, 4, 5, 6, for a company code.
now you can define a RKF with company code and sales keyfigure.
In the report, in columns, you use this RKF in new selection and restrict it with product type in 6 diff columns.
New Selection.
Restrict it with RKF
Restrict it with product type 1.
similarly for others..
Hope this helps you....

Can i use the key figure total delivery time in days in rows and how is can

Dear all,
Can i use the key figure total delivery time in days in rows and how is can.but all the key figures r used in rows but i cannot use in column.i want bothin rows and in column at a time ,can this is possible,and how.

Hi,
yes you can.You will have to use structure in the row.
Right click on the row and create a new structure.
In this structure you can add key figure.
Maximum number of structure a query can have is two
Please assign points if it helped you.
Regards,
Senoy

Why, when I paste my selection in a new layer, is it 10 times larger than when I copied it?

Why, when I paste my selection in a new layer, is it 10 times larger than when I copied it?

Kevin If you don't understand don't try to take the discussion offline via private message. Other that have the same problem will not benefit if taken offline here is you PM.
Hi,
Thanks for your response to my question. What is the best way to adjust to match resloutions of pictures/photos, etc in PSE 12. I am trying to layer photos and selections from photos but when I cut and paste, sometimes I get this HUGE image that doesn't even come close to fitting on the screen.
Thanks!
Kevin
Kevin
You need to understand pixels better know what is going on when you do things. All pixels are not created equal. Some have better quality the others.
When you have a camera that take captures 3000x2000 px for an image and you have a good lens and exposure setting you wing up with 6,000,000 quality pixels for your image.
If you resample that image for the web to fit within 300x200 pixels you wind up with a 60,000 high quality web size image. Or a high quality image that will fit on your display at its resolution. The images resoultion setting is meanless for displays use their resolutuin they do not support image print DPI resolution setting. And Displays do not hava a 72DPI resolution.
So when your post processing think about Pixels DPI is meaningless except when you use a unit based on DPI like inches. However also remember Displays do no support the images print dpi resolution. The only time 1" on display equal 1" in print is when the images print resolution is the same as the display you are using. All displays do not have the same resolution/ Most desktop displaye are around 100DPI that is changing and Laptop and tablets can have resolution above 300DPI. So what will nor fit on your displat may well fix on a laptop or tablet.
DPI is actual pixel size 100DPI pixels a 1/100" x 1/100" = 10,000 per square inch 300DIP 1/300"x 1/300" 90,000 px per sq inch.
The same number on pixels image on a 300dpi display is 9 time larger on a 100Dpi display. What may not fit one your low resolution display may fit on the same size high resolution display for the display displays more pixels then your display can.
If you resample that 300x200 web size image to back to a 3000x2000 pixel image for print you wind up with 6,0000,000 lower quality pixels.
Though the 300X200 pixels image was a high quality web size image much of the original 6,000,000 image quality was reduced in the 300x200 px image. Much of the detail you had in the original 6,000,000 pixels image was discarded in the process. The new 6,000,000 pixels image was made only from a 60,000pixel image they were not captures using a camera exposure. The camera had the actual real detail in front of it to capture. All the computer had were 300x200 pixels it has to add details for the larger image and it does by interpolating the 300x200px image.
Preserve the pixel you get from your cameras. They are the highest quality pixels you will ever have for your images. Every time you resample an image up or down in number of pixels you loose some image quality. Not one of the original pixels remain intact you wind up with a totally new image created by interpolating the old image. Do not save the new image over the old image and loose your good high quality pixels.

Exporting a jpg is 3 times larger than CS3

Clearly I'm missing some setting - I'm opening jpgs that had been created with FW CS3 and immediately saving it (for troubleshooting purposes). Optimize Quality is set to 75 | Smoothing 2. The file is fully 3 times larger than it was prior to save. I've exported instead of the straight Save and have the same result. I've lowered the Quality to 60 to make sure I was invoking the compressor ... the file lost 2k.
So a 260x83 bitmap moves from an acceptable 5k to 17k (or 15 with unacceptable compression level)?
Can't be right. Not even Adobe could have mucked up FW this badly.

Not too certain about this, but the increase in file size might be due to additional meta data in the file - that easily adds ~10kb to the file, so it might explain what you are seeing. But as far as I am aware, the save for web functionality in FW should remove meta data.
Use RIOT (radical image optimization tool) (win) or ImagOptim (mac) to check if this is the case or not, and remove the meta data.

User Interface is larger than it should be, how can we fix this?

Our marketing director is experiencing an issues with her UI for Acrobat. Her view of the overall UI is twice as large as it should be. We uninstalled and checked her preferences but nothing has changed, everything up in the tool bar and stickies are larger than it should be, does anyone have any suggestions or fix's for this matter?
Thanks,
Billy

Hi Billy,
I suspect the text size in the system's control panel is 150%?
She can simply go to Acrobat preferences -> General -> Then change the "Scale for screen resolution" to 100%. This will force the UI to run at 100% like it did before.
Please let me know if this works.
Thanks,
Luc

My ipad air spends more time buffering than it should

My iPad Air spends more time burreing than it should. I have 3 iPads 1 and 3 generation and the Air. The 2 older iPads don't have this problem. Is there a setting that is causing this or dose my Air have a problem???

Hello DLM100,
Internet connection on your iPad Air is slower than expected. I recommend reviewing the section titled "Wi-Fi disconnects or signal strength is less than expected" in the following article for the issue you described:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

Key figures display limitation in BI 7.0 query

Hi,
When i converrt my 3.5 query which has 12 key figure columns displayed all in 1 page into 7.0 version it only displays 4 columns at a time.
Please how can i resolve this? I need to see all KF columns in once like the 3.5 version.
Tahnks a lot.
Cesar

1. Start BEx Web Application Designer tool
2. Open your webtemplate if you have one or (0analysis_pattern)
3. Go to the "Overview" tab which lists all the webitems in that template.
4. Find the web item with name "ANALYSIS" and go to its properties(or edit) using context menu.
5. find the property "Number of Data Columns Displayed at Once" and change the default value of 4.
Assign points if helpful
Regards, Uday

Key Figure Display in Interactive Planning

Hello,
I am unable to display some of the key figures in SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
Would really appreciate your help.
Thanks,
Sarath.

Hi Visu,
Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
Thanks

Key figure display in the query

Hi experts,
In a query in the columns we have 3 key figures. I dragged a characteristic into the columns and
executed. Now for each value in the char it is showing all the 3 key figures.
My requirement is, for only one keyfigure value the characteristic should show the value. For the
remaining 2 key figures it should not show.
The remaining key figures to be displayed as normal.
How to get this ?
Regards,
Nishuv.

Hi Rao,
Thanks for the reply...
My requirement is :
We have netvalue and cutomer outstanding key figure in the columns.
I want to drag terms of paymnet characteristic into the columns.
By doing this the query output will be as follows:
Terms of payment
Net value|Customer outstanding
But my requirement is Terms of payment should be only for Customer outstanding i.e
Terms of payment
Customer Outstanding
It should not take the Netvalue under terms of payment.
Netvalue should be displayed outside.
How to do this ?
Regards,
Nishuv.

Key Figure displays as rounded in BEx

Hello,
I have a report that is based off of InfoProvider/Object: 0MATERIAL.
When I run the report, the key figures are displayed as rounded values, for example 15.000 LB, 0.000 LB, 2.000 FT3.
I would like to get 3 decimal places for example 15.255 LB, 1.531 FT3. When I look at the Master Data for 0MATERIAL in RSA1 I see values with greater accuracy then the rounded number obtained in reporting.
Details below...Can someone help?
For infoObject 0MATERIAL, I have the attribute 0NET_WEIGHT key figure.
0NET_WEIGHT has the following properties
Type: QUANTITY
Data type: QUAN - Quantity field, points to a unit field with format UN
Unit of measure - 0UNIT OF WT
Aggregation/Exception Agg: Summation
Cumulative Val
Decimal Places: 0.000
Display "in 1"
Bex Descript: Short description
In BEX under 'Number Format' I have
Scaling factor: (From Key Figure: 1)
Number of Decimal Places: (From Key figure: 0.000)
Thanks,
Nick
Message was edited by:
Nick Bertz

Hello Jaya,
When I looked at the T006 table for the following units I obtained the value 0 in field ANDEC
FT3
LB
When I look at tx: CUNI and I set the selection to 'Mass' > then I click on 'Units of Measurement' > Then I select 'LB' and click on 'Details' I see no value for 'Decimal pl. Rounding'
When I look at tx: CUNI and I set the selection to 'Volume' > then I click on 'Units of Measurement' > Then I select 'FT3' and click on 'Details' I see no value for 'Decimal pl. Rounding'
What i see in CUNI on BW matches what I see in CUNI on R3.
None the less, on our development system I made the change via CUNI setting 'Decimal pl. Rounding' to 3 and it seems to be working now.
I could have go to RSA1 > Source Systems > RC'd on my Source System > Chose 'Transfer Global Settings' > Selected the checkboxes for 'Units of Measurement' and then for mode selected 'Update tables' This updates the T006, T006A, T006B, T006C, T006D, T006I, T006J, T006T tables.
But since on R3 the CUNI table had the same information, it wouldn't have helped. That is why I went and updated CUNI directly on BW. When I saved the changes it prompted for a transport which will make it easy to transport to BW Production.
Thanks for the Help!
Nick
Message was edited by:
Nick Bertz

How to copy two different key figures in third key figure in different time bucket.

Hello,
I require to copy one key figure-A for 2 months (M+1 and M+2) in other Key figure C. At the same time, I need to copy key figure-B from 3rd month onwards (M+3 onwards) to same key figure C. Is there any way to do this, please suggest.
Regards
Rajeev

Check the following thread
Defaulting to a KF from 2 KFs, based on different periods
Thanks,
Pramod

Restricted Key figure - Displaying as normal number instead of currency

Hello,
I'm creating a restricted key figure using 0AMOUNT which of course is currency, however in the cube that I'm using 0AMOUNT is used for both Dollars and Quantities. The problem is 1) it is always displaying a $ symbol in front of the key figure and 2) it seems when I try to create a calculated key figure and try to add the 0AMOUNT to another 0QUANTITY infoObject I get an error (I'm presumming because I'm trying to add a number to a currency infoObject).
So my question(s) are 1) Can I format my new restricted key figure to always display as Quantity even though it's a currency info object
and 2) Can I do a calculated key figure adding a Currency InfoObject to a Quantity infoObject?
Thank you very much!
-Patrick

1) For your first question, u don't to have the currency dollar displayed for the restricted 0amount instead you want the unit of quanity.?if you want to do this,you could make use of Excel's format options i.e go to
format-->.Style->Select the stdBexInput item and make the appropriate settings.
2) You can use NODIM() function to add two different keyfigures.

SAP BW Key figures displayed 100 times larger than it should

Similar Messages

Maybe you are looking for