SAP BW on the AS/400 System

Hi experts....
Could please let me know SAP BW on the AS/400 System ????
If you have any type of document please share.
REgards
Sri

HI
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/effective%20sap%20bw%20system%20management%20-%20webinar%20webinar%20powerpoint.pdf
Hope it helps

Similar Messages

Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
Ram

Hi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman

SAP import the part of system copy.

Dear Experts,
I am doing SAP import the part of system copy. Every phase is complete successfully but in u201C Create Database Schema u201C status bar i got information u201C remove schema user SAPSR3u201D.
This step is running since 10 hours. Is this the actual time to be taken or am i missing out any task which needs to be looked into as well.
Kindly help to complete this task so that I can proceed with the process of importing.
Thanks & Regards,
Vishal Borisa.

Hello Vishal,
you can ask Oracle what statement is currently running, e.g. by:
select a.sid,a.serial#,a.user#,a.username,a.process,a.logon_time,a.command,b.sql_id,b.sql_text
from v$session a, v$sqlarea b
where a.sql_address=b.address
and a.status='ACTIVE' and a.type<>'BACKGROUND'
order by a.sid;
Regards,
Mark

Commitment Interface from SAP to the third party system!

When we created Purchase Requisition or Purchase Order, the commitment will be created. The third party system needs to track the commitment. So SAP needs to send the commitment to the third party system by this interface.
But when the Goods have been delivered, the commitment will be zero out and the actual will be posted to SAP. SAP needs to send the offsetting records to the third party system. In this way, the third party systems knows that how much commitments have been reduced.
My problem is that I cannot find the right table to record the offsetting entry. In the table COSP, I can identify the commitment by the Business Transaction -- RMBA and RMBE. But it did not record the offsetting entry. It just becomes zero when the goods have been delivered. But I have nothing from that table to send to the third party system.
Does anyone meet this problem before? Can you share some experience on this?
Thanks

Hello All,
The issue is resolved now. In the EAI seebeyond at the time of writing the file to be sent after reading the IDOC the format is changed. Initially the file is written in the ASCII format now we have changed the formatting to ISO to resolve the same.
Thanks,
Mohit

Does SAP test and certify MII against the latest operating system patches?

Does SAP test and certify MII against the latest operating system patches?

If by latest OS patches you mean - does SAP retest MII every time MS puts out a new patch or critical update, then the answer would be no (probably not overly surprising).
This would be more impacted in 11.5 because of IIS and the only-Windows operating system, but with v12.x and the platform/OS combinations supported by NetWeaver, MII is really abstracted from the O/S through NetWeaver so that would be the angle to pursue with regard to re-testing and validation. I most assuredly cannot speak to the validation process for NetWeaver pertaining to operating system patches and updates, but I would assume OS service pack levels would be dealt with according to release cycles, but it would be very reactive for every patch that comes along for each of the operating systems in the matrix (http://service.sap.com/pam).
Regards,
Jeremy

Who can give me all the name of system table or organization table in sap?

Who can give me all the name of system table or organization table in sap? such as the table stores the client,company code ,plant,transaction code ,sap menu,purchase organization along with the relation between organizations such as
the relation between company code and plant, the relation between company and purchase organization and so on.Pls supply the list of table name or the url where I can see these information.
Thank you in advance.

Hi YuLin
refer this link you will get all tables in SAP with description and relation.
http://www.erpgenie.com/abap/tables.htm
regards
Yogesh

SAP ICH in the SCM system is capable of publishing pages in web application

Experts,
We have one critical requirements where in we have to suggest customer that whether SAP ICH in the SCM system is capable of publishing pages in web application or not.
In detail... in our customer land scape SCM is the central planning tool and there are two type of users, one type of users have direct access to SCM system where they can directly do thier demand planning, the second type of users only have access to the web application called "extranet", from which they want to see the published planning guidelines and based on that they also wants to create the demand planning (from the web application - extranet). My question is whether SAP Inventory Collaboration Hub will do for this requirement? Do we need an Enterprise Portal to facilitate this functionality? Please advice. Very impartant and critical for delivery by tomorrow. Thanks in advance.
Warm Regards,
Krishnan

Hi Krishnan,
From your query I understood that a set of DP users access the system from external location over web.
SAP gives a solution ,using BSP web pages, to expose the SAP screens as its seen through the SAPGui's. They look similar to the standard only difference is it will be embedded in the browser. Unfortunately SAP was recommending this technology, they has plans to retire this technology as the Portal would suffice this requirement. So to answer your query the portal is a viable solution to your requirement.
ICH cannot help you because it does not give the functionality of DP, instead its a application for collaboration between the entities (manufacturer & supplier or customer).

Can more than one SAP ERP system connect to the same PI system?

HI Experts
Well i am new to SAP Process Integration 7.1 and i have managed to point PI system to SAP DEV ERP , but i also want to add these other 2 systems SAP QAS ERP and SAP PRD ERP Using RFC Adapter. So is it possible to integrate SAP QAS and SAP PRD ERP into the same PI system that is pointing to SAP DEV ERP. If possible what are the configuration steps that i should follow?.
This project implementation is based on SAP MDM 7.1/ SAP PI 7.1/ ECC EHP6.

Hi Farai,
Technically this is possible. But don't forget that all systems are then using the same ESR and ID. So changes on PI are also influencing ERP QAS and PRD. I don't recommend this. At least you should have 2 stages for PI: Development and QAS/PRD.
You just need to maintain 2 connections in ERP: ESR connection and RFC connection. For using the interfaces in PI for all 3 stages you need to create 3 different configurations in Integration Builder of PI.
Best Regards
Harald

Reg: IDoc is u0091pushedu0092 into SAP from the external EDI system

Iam facing one issue in our system for message type DESADV (inbound). please read through .
"When an IDoc is pushed in from the external EDI system & even though the inbound Partner Profile is set to immediate processing mode:
The IDoc stays in status 64 - 'IDoc ready to be transferred to application'. This assumes that the IDoc has not been processed yet and still needs to be processed with program RBDAPP01 (or via the process button in BD87).
We don't want to again run this program "RBDAPP01". What was the problem.
I appreciate ur help.

Hi Krishna,
In some other scenarios if an IDocs remains in status 64, it means that the processing within the IDoc engines did not reach its end, where the new status could be set. There are two principal reasons:
1. In the matching partner profile the processing is not set to "Trigger immediately"
2. The application that processes the IDoc abnormally ends with a fatal error (crashes). If this happened you will see a trace in the system log (ST22). In this case have the satellite system write the file to disk but you trigger the EDI_DATA_INCOMING. Then start EDI_DATA_INCOMING from SE37 manually and debug yourself through the individual steps. A good start would be to set a break-point in the application handling function (in your case: IDOC_INPUT_DESADV ).
If useful do reward.
Regards,
Adarsh Srivastava

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while executing SAP E-Commerce Application with UME system

When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
I checked the defaultTrace log and every time the login page is called the following messages are displayed:
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain### at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
another 40 lines of similar text
When a login is attempted, the following messages are appended to the trace file:
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
I have modified the userid and hostname in the above trace output.
Does anyone know how we can debug this issue further?
Thanks,
Setu

Hi,
Are you using UME login type for your B2B Scenario?
In your B2B XCM setting have you selected UME related login type?
eCommerce Developer

Using the SAP GUI from the NW2004s SneakPreview Download

Hello,
does anyone else have major problems with the SAPGUI from the NW2004 SneakPreview download page?
Im getting a runtime error when logging on:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          24.12.2005 00:34:11
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
     Control Framework : Error processing control
     Technical information about the message:
     Message classe...... "CNDP"
     Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_GUI_CFW====================CP
     Include                                 CL_GUI_CFW====================CM002
     Row                                     23
     Module type                             (METHOD)
     Module Name                             FLUSH

Hello Rich,
the sap gui from the NW2004s SneakPreview page is on patchlevel 8. The problem is when i use the latest sap gui from the service marketplace (full install!) i cant event call the gui. Getting a error when doubleclicking on the SAP Gui icon.
'The procedure entry point 'RfcResetTraceDir' could not be located in the dynamic link library 'LIBRFC32.dll' .'
So actually since i installed the NW2004s on my local notebook the only sap gui "working" (at least i can call it) is the one from the NW2004s Sneakpreview page but im getting this error mentioned here on all systems! not only on the NW2004s system
regards,
Markus

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

SAP BW on the AS/400 System

Similar Messages

Maybe you are looking for