SAP BW Purchasing - Scheduling Agreement delta processing
Hi,
I have a question about Scheduling Agreements coming from ECC to BW with delta processing.
When a goods receipt happens for a Scheduling Agreement item, it registers process key 2.
However, it seems that when a second goods receipt happens for that same scheduling agreement item, the old goods receipts updates with a process key 4, and the new receipt takes the process key 2 when we aggregate at an InfoCube level. In the first level write optimized DSO, the process keys are in tact for every line item & schedule line (all goods receipts process key 2 are there).
Can somebody confirm this logic?
We are having issues because we need all of that goods receipt history stored in our InfoCubes, and we do not know how to resolve. Please help! Points will be assigned...
Thanks very much,
Courtney
are you saying that Process Key is 2 for both the good reciepts in write optimized DSO but in cube, first good reciept is having a process key 4 when second good reciept is also there?
If yes, it seems that problem is with the info object for process key - is it a Key Figure or characteristic?
It should be a characteristic so that the value is not added but overwritten.
you are doing a full or delta from Data Source to DSO and DSO to Cbue?
Regards,
Gaurav
Similar Messages
-
How to update Purchase Schedule agreement
Hi Experts,
Please tell me the ,is there any Function Module/BAPI which updates Purchase Schedule Agreement(Transaction Code ME38) in SAP???
Thanks..
Debi.Hi,
Please check this BAPI BAPI_AGREEMENT_MAINTAIN.
Regards,
Ferry Lianto -
BAPI for schedule lines (purchase scheduling agreement)
HI
Is there a BAPI available to create schedule lines in purchase scheduling agreements?
Is there any other way of creating schedule lines in purchase SAs via program?
Thanks in advance
SriramDear Sriram,
Please check BAPI_SAG_CREATE with SE37.
Regards,
w1n -
EDI settings for Purchase scheduling agreement
Hello,
We are having one new requirement,
Purchase scheduling agreement created for foriegn or local vendor, the Schedule lines are created or release by MRP run.
After MRP run the schedule lines are going to create , then vendor can get the message though IDOC,
How can we customise the ALE and Idoc settings for above said scenario.Hi Mahesh
After schedule lines are created for SA we have provision of schedule line release transfer to Vendor , please check whether output determination is feasible with medium as Idoc
Please check
Kishor -
Set Default Values on Purchasing Scheduling Agreements
Good day All.
I need to ensure that the Confirmation Control Key(EKPO-BSTAE) , Unlimited Over delivery indicator (EKPO-UEBTK), Creation Profile (EKPO-ABUEB) and Jit indicator (EKPO-FABKZ) is automatically updated with default values when a scheduling agreement is created for a specific purchasing organisation. Please advise if this is possible via config (SPRO).
Many thanks, Yumna
Edited by: Yumna Abrahams on Aug 10, 2011 2:58 PMHi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
Scheduling Agreements-Error processing Shipments
When i try to make any changes to the delivery document (change/delete) created by the combination of two scheduling agreements the system shoots an error ME803 dump.txt. I looked at Note 100690 which says inconsistency and executed the correction report to fix the same. But whenever new delivery is created from these scheduling agreements encounters the same problem. Need to run the correction program to reprocess the delivery document. This is affecting the shipments from other plants.
Delivery Quantity is getting updated wrongly
Can any one tell me the root cause of this problem.
Thanks in advance
Regards
BaluAnswered.
-
Binding on MRP field in Purchase Scheduling Agreement
Hi ,
We are trying to create a scheduling agreement using t-code ME31L, copying an existing scheduling agreement. This brings in most of the data from the referenced scheduling agreement. However, it does not bring in the "Binding on MRP" field in the scheduling agreement even though a value exists in the reference document.
Any help on how to bring this from the reference doucment is greatly appreciated.
Thanks
HariHello
You can use BAdI MD_PURREQ_CHANGE to define the desired valud for this field.
Check this document for more details about the BAdIs available on MRP.
BAdIs for MRP
BR
Caetano -
Delete/Stop Scheduling Agreement Release (Purchasing)
Hi,
I have a question concerning releases of a purchasing scheduling agreement in SAP APO. Basically very simple - how can I delete them or at least stop them? I did not find any transaction or report to do so (only for SD scheduling agreement releases). I know that there is a functionality of "dynamic stopping" of release done by the system but how can I do it manually? If there is no such function (which I could not really believe) what would be the business scenario to stop such a release (releases are created by APO, but I manually want to delete them). There has to be such functionality...
Many thanks in advance
ChristianHi Christian,
Pl check this document..
if it helps that would be great for me..
http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/22/ec9d3b0ec10670e10000000a114084/frameset.htm
Thanks,
Bala. -
Scheduling agreement ( Pur. doc. Type LPA) does not get updated in MEI1
We have a requirement that, purchasing documents ( POs and Scheduling Agreements) needs to be updated when there is change in price in purchasing info record. We have made configurations to activate the change pointers on pricing conditions and they are working fine. To update the price in purchasing documents following process is used.
1. Transaction MEI4 u2013 Create work list
2. Transaction MEI3 u2013 Recompilation of document index.
3. Transaction MEI1 u2013 Changes to purchasing documents due to changes in conditions.
After running MEI1, price is updated only in purchasing documents and the update does not take place in scheduling agreement. Does anyone one know what things may be missing? Or is this a SAP transaction issue?Hi
If scheduling agreement has time dependent conditions it will not update. You need to remove time dependent tick from document type definition config.(spro>MM>purchasing>scheduling agreement>define document type)
remove tick mark it will update.
Regards
Antony -
GR refer to schedule agreement without release
Hi
We want to do GR according to a schedule agreement without release. but sap cannot skip release process. I find out the configuration is common for both PO and schedule agreement. everybody can give me some solution?
I also see some difference between schedule agreement type(LP/LPA). but this not solved my issue.
Regards
HenryHi Henry
If u want to release the schedule agreement even though u use LP document type then
Goto SPRO-MM-Purchasing-Schedule agreement-Define document types....Here in LP document type, click the check box of release docu. Then system will prompt for release...
Regards,
Dharshan -
Hello experts,
I use purchasing schedule agreement I would like to build a report in which I can see for each schedule agreement, for each delivery (Goods receipt) the date and the quantity and how SAP split this quantity according to schedule lines compared to schduled quantity.
I tried with SQVI, but I have no result yet.
If someone can guide me to build the query it would be fine.
Thanks a lotHello,
This solution is not fitting to my expextation.
I explain again :
I would like, for each purchasing scheduling agreement, to see for each delivery (goods receipt) the quantity enter in stock and for which scheduling line it matches.
For example, sometimes we can have one delivery wich cover more than one schedule line, it means that for each schedule line I expect to have one line per delivery till the quantity fit to the delivery line, and the date of the delivery.
I would like to build it with a query if it's not available in standard Tcode.
Many thanks -
How to create a standard order with using the Scheduling agreement.
Hi All,
Could any body tell me step by step process of creating a standard order using the Scheduling agreement reference.
Thanks,
srinivas.HI
In Scheduling Agreements the subsquent process is not order it is actually delivery
Scheduling Agreements contains Fixed Delivery dates and quantities and the same can be seen in schedule lines of the
Scheduling Agreement which you have prepared
The word fixed carries a lot of meaning here
On the due date
the system actually creates deliveries or it appears in the delivery due list
You cant create order referring to scheduling agreement
This is business logic and SAP logic too
Scheduling Agreements means your order is sheduled for delivery
Raja -
BAPI_SCHEDULE_MAINTAIN throws error for time- independent scheduling agreement
Hi All,
I get the below error while modifying a stock transport Scheduling agreement in UI5 using BAPI “BAPI_SCHEDULE_MAINTAIN”
“Scheduling agreements with time-independent conditions are not supported”
Found a note 1046794-
"BAPI_SAG_CHANGE (and BAPI_SAG_CREATE) can only treat scheduling agreements with time-dependent conditions. Document conditions are not supported. Therefore, this kind of scheduling agreements cannot be processed. This is a missing functionality”
To meet some finance requirements, we need to use time-independent conditions in the scheduling sgreement, in order for a custom condition type to be picked up.
I'd appreciate any advice I can get about how to fix this functionality in the BAPI or alternatively how to link the pricing condition type to the Scheduling agreement document type?
Thanks so much.Link between Time dependent / independent condition and Scheduling agreement document type is in configuration under SPRO>MM>PURCHASING>SCHEDULING AGREEMENT>DEFINE DOCUMENT TYPES>SCROLL TO THE RIGHT here you find a check box Time-D.C.
Thanks
DD -
Price determination date control in Scheduling agreement (ME33)
<<Do not ask for or offer points>>
Dear SAP chams,
I have one doubt at the time of scheduling agreement creation. I am creating scheduling agreement trough t'code ME33. In the same, Select line item, go to item data, go to Additional data. Here the field Pr. Date Cat (Price Determination (Pricing) Date Control) contains the value "5" (i.e. GR date). I want to change this value. How can i change this determination ??...
Helpful answers will surely be awarded by points.
Thanks and regard,
Tarpan Vadaliya
Edited by: Matt on Feb 27, 2010 10:47 PMHi
Price determination category 5 cannot be change in scheduling agreement if your document type is time dependent. (See config spro>mm>purchasing>scheduling agreement>define document type. In that you will see a tick for time dependent condition)
If the config tick is removed then you can change price determination to any other option.
Regards
Antony -
Open (procurement) scheduling agreement
Hi,
We will use subcontracting scheduling agreement to process subcontracting. Does anyone have any data conversion experience of open scheduling agreement?
I didn't find any standard SAP batch input program at LSMW. I am working on recording the creation steps at LSMW. Any input?
Regards,
NancyHi Nancy
Please check if BAPI: <b>BAPI_AGREEMENT_MAINTAIN</b> helps you.
Documenation of BAPI can help you using the same.
Kind Regards
Eswar
Maybe you are looking for
-
My ipod touch is not found on my pc or in itunes
Hello This is the situation: I was ready to get my battery loaded but my pc didn't recognized my ipod touch 4th gen. I have windows 7, 64-bit version and newest version of itunes. I have already tried to restart my pc but that didn't work aswell. Is
-
i need to de-authorize a computor that no longer works. i undersatnd that i need to de-authroize all computors associated with this acount and then authrorize each computor that i want. question : will i lose my music libary??
-
Tuxedo -Oracle RAC , We are planning to upgrade the Tuxedo Environmet to o Support Oracle-RAC , with Single Database server with Two Instances . ***At the moment we have ceratin Tuxedo Services ( part of a transaction ) to connect Database , which is
-
Hi experts, I want to download the data of the internal table to notpad. Is there any sample coding to do this? With regards, Goutam
-
HELP - i'v lost the colour on my ipod
i have an ipod photo, and i'v had nothing but problems this last month. i was forced to restore the ipod twice due to I/O device errors, and then i was told that the device could not be read from or written to, yet both my pc's would recognise the ip