SAP BW query - new keyfigure added but not displayed in CR

Hello Experts,
I´m using a CR2008-Report on top of a BW Query. Now I´ve added a new key figure to the query, but in CR the new key figure isn´t displayed. But it is displayed if I open the query again as a second 'table'. Is there a possibility to get the new key figure displayed also without opening the query as a second 'table' ?
I don´t want to 'reconfigure' all my reports in the future completely if there are new key figures !
Thanks for your help in advance !
Frank

The same applies if I change the selection critiria for a character infoobject: e.g. there was a fixed selection in the filter, and now I want that the user is able to select freely via a variable. It does only appear in Crystal Report if I add the query again. So do I have to rebuild the whole report then ???

Similar Messages

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that.

I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT1386 i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

i deleted some songs from my iphone 4. now when i try to re-add them to my phones itunes, they wont add. whats wrong? new songs add. but not the old ones! help please

Hey renie1515,
Thanks for using Apple Support Communities.
When you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days.
Note: Removing a device from your Apple ID does not override the 90-day timer. You must wait 90 days from the day the device was first associated with your Apple ID before it can be associated with another Apple ID.
Have a nice day,
Mario

HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me

Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?

Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Sap xi SCENARIO source directory working ,but not working target directory

sap xi SCENARIO source directory working ,but not working target directory..
plz help me

Hi,
Be more specific on the problem you are facing so that the ppl here can help..
looks like your are trying to file to file scenario and the file is not generating at the target folder ...
then check the communication logs of the receiver adapter using RWB->CC logs..
post the error you have received there..
HTH
Rajesh

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I can open a new browser window, but not a new tab, neither by clicking the plus or selecting it from the menu. I have fully updated firefox and also restarted. what's going on?

I have the same problem with the right click and do not have the ask toolbar installed on my system?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

Updateable Report/Pagination - rows found but not displayed

Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
If I use "Row Ranges X to Y (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (no pagination) I have problems.
If I use "Row Ranges X to Y of Z (with pagination) I have problems.
Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
Do you know what is causing this problem?

I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
I am using HTMLDB 2.0.

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

Spouse, Children fields from Outlook - syncing, but not displayed

I discovered something rather curious, and am wondering if anyone has any more information about this.
I use the Children and Spouse fields in my Outlook records. When I sync to iPhone, these fields are not shown. However, if I choose to "share a contact", it sends a vCard, which does include these fields! So the iPhone is clearly copying it over, but not displaying it? What's the point of that? I can understand a reluctance to make some fields uneditable, but storing them without displaying them?
Also of note: the vCard does not include the Anniversary field, even though it does sync this and includes other fields in the vCard like Birthday. That looks like a bug to me. Anyone care to confirm?
Thanks,
Keith

Hi,
It depends what you require...suppose in the multiprovider you want the filed from the ODS then you should select the fiel from the ODS but if you want the filed to get the value from the navigational attribute then you should go fro the navigation attribute in the options.
Navigation attribute will show up in the left if you have made them navigation in the cube as well.
identification gives you an option to map the the multiprovoder fileds with the fields of the underlying infoproviders.....if you go for create recoomendations then it will chose the optimal mapping that is one to one mapping.....A to A etc...but in certain case you want A to map to B such as in sone cases shipt-to-party can take data from sold-to-party....depends upon the requirement.
The options in the left gives you the char which will show up in the query and by selecting the char from the right from different inforproviders you actually defeine which filed from the infoproviders it should take data from.
So just make sure that all the fields in the right which are going to show up in the query should get have the identiication from the different infoproviders and there respective char....a navigation mapped to a navigation....and a direct char to a direct char from the infoprovider.
Hope it explains.
Thanks

New ALV Grid Field not Displaying?

I revised a report to have a new column. So I added this new field to the code.
I see the field and the value when I call
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
Bbut the field I added does not display.
Thank-you.

Hi,
Please ensure that you added the related logic in the FIELD CATALOG of the ALV.
Regards,
Nirmal

IPad will open but not display information entered on a form sent as a PDF.

iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?

I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.

Query works in preview, but not when added under a Query Group

Hello Experts-
I'm trying to use this query as one of the options under the drop down on the Supplier Search under the Supplier Management.
Error message:
while trying to invoke the method com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null
object loaded from local variable 'paramValue' while trying to invoke the method
com.sap.odp.comp.query.QueryParamValue.getPromptParamDef() of a null object
loaded from local variable 'paramValue'
The query itself is complicated, but it works fine when executed under preview.
Wondering if any one has ever seen this behavior and knows of any typical causes?
Thanks,
Mike

Thanks for the offer, Vignesh.
Sorry, I'm currently having trouble duplicating it, but next time it happens I'll try to get some screenshots.
I have narrowed it down to blank values in optional string fields when the query loads. I fixed (kind of) the ones I was having trouble with by rearranging the filter parameters so there would not be blanks.
Thanks again,
Mike

Query running in Quality but not in Production

Hi Folks,
we are running a query AQICSDUSERS=====MOVEMENTLIST4= which used to get executed previously,but all of a sudden now after running for an hour or so it is coming back to sap easy access screen without displaying the report.It is running and giving the report in Quality but not in Production.
What could be the reason?
K.Kiran.

Hi Folks,
From DUMP I got this:-
<b>You should usually execute long-running programs as batch jobs.
If this is not possible, increase the system profile parameter
"rdisp/max_wprun_time".</b>
I want to know how to increase the system profile parameter
"rdisp/max_wprun_time".
Thanks,
K.Kiran.

SAP BW query - new keyfigure added but not displayed in CR

Similar Messages

Maybe you are looking for