SAP C_TSCM52_60 MM Certifiation Help

Hi Experts,
I am going to write first time SAP MM certification ( *  SAP Certified Application Associate - Procurement with SAP ERP 6.0 * )
Exam code :C_TSCM52_60
Level: Associate
SAP link provides the reference material for the exam as below.
1) TSCM50
2) TSCM52
Please provide inputs on the latest versions of the above material
I have a copy of both books with following versions
1) TSCM50: 2004 Q1
2) TSCM52: 2004 Q1
Confirm if i have the latest version? do i need to study any latest version materials or the above version is OK?
and aslo please advice do i need to study the lower level materials like SCM510,SCM515,SCM520,SCM550 which is also mentioned in SAP Website under this code.
Please help.
Thanks
Sireesha

Please check these answered links:
MM Certification
Certification MM
SAP MM certification
SAP MM Certification

Similar Messages

  • To upload a data into SAP Table with the help of RFC function in BODS

    Hi,
    Please provide me step-by-step solution to upload data into any SAP table with the help of RFC function in Data Services.
    I have created RFC function that upload data into SAP table. RFC Function contains one table that has same structure as my database table.
    In the data services how can i filled the table of RFC function, i am using this function in query transform of data services but it gives me error.
    I am also follow link http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsDataServicesTipsand+Tricks
    but it did not help me.
    Thanks,
    Abhishek

    Hi Abhishek,
    Did you import the function module in the SAP datastore first? When you open the SAP datastore, the function should be listed in the 'functions' section. If not, import it. Make sure your function is remote executable.
    Once the function is there, you can use it in a transformation. In 'Schema Out' right-click on 'Query' (top level) and choose 'New Function Call'. You can then select a datastore and a function in the datastore. The wizard will show you which output parameters are available. I believe you have to add at least one and can select as many as you like.
    After confirming your selection the function and the output parameters appear in Schema Out. You can then right-click on the function and choose 'Modify function call'. A popup will appear where you can specify the input parameters.
    I hope this helps.
    Jan.

  • SAP BI - New Learner - Help Required

    Dear Friends
    I have started learning SAP - BI from a local traning center.  I would appreciate if you all could guide me on where I should start my learning from?  What training materials that I need to look into? what is the time i need to spend to complete the module so that i can start applying for jobs? Any information that would help a new starter to get ready to apply for a job in 6 to 8 months time.
    Your help will be highly appreciated.
    Regards
    Have a nice day!!!
    Sudarshan Balakrishnan

    Hi ,
    Welcome to SDN ....
    You can follow schedule what even SAP Suggests like order is.....
    1. Basis of BW ( InfoObjects ,Cubes etc..)
    2. Reporting.
    3. Extraction.
    4. Data Modeling ( Star Schema...etc)
    5. Authorization.
    6. Performance Tuning..
    Regards,
    Vijay.
    Message was edited by: vijay Kumar
    And Help.sap.com will sure help u a lot as u can find solution to all ur problems there as beginer , if not u can always post at SDN.

  • SAP ECC 6.0 HELP  LINK ?

    Hi Friends,
    How to get SAP ECC 6.0 help ?
    Any link to download??
    regards,
    madhu kiran

    Hi,
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
    Regards,
    Srilatha.

  • Does SAP test and certify MII against the latest operating system patches?

    Does SAP test and certify MII against the latest operating system patches?

    If by latest OS patches you mean - does SAP retest MII every time MS puts out a new patch or critical update, then the answer would be no (probably not overly surprising).
    This would be more impacted in 11.5 because of IIS and the only-Windows operating system, but with v12.x and the platform/OS combinations supported by NetWeaver, MII is really abstracted from the O/S through NetWeaver so that would be the angle to pursue with regard to re-testing and validation.  I most assuredly cannot speak to the validation process for NetWeaver pertaining to operating system patches and updates, but I would assume OS service pack levels would be dealt with according to release cycles, but it would be very reactive for every patch that comes along for each of the operating systems in the matrix (http://service.sap.com/pam).
    Regards,
    Jeremy

  • SAP Business One SDK help center

    Hi,
       Can any one give me a copy of SAP Business One SDK help center.
    thanks

    Hi Toto,
    You can download a copy of the latest 2007A help center from here:
    SAP Business One - SAP Developer Network
    It's the main news article at the moment.
    Kind Regards,
    Owen

  • Can SAP learning hub be helpful to me in getting SAP certification in India?

    Hello Friends,
    I came to know about SAP Learning and found a very flexible for learning. As a working professional I found it very suitable for me to learn SAP at a time I want. But I have few queries which I would like to confirm.
    1) Is SAP learning Hub Partner edition available in India?
    I have visited SAP training and Certification shop. when I select SAP Learning Hub partner edition it does not shows me any details for India. So is it possible to subscribe SAP Learning Hub editions from SAP India website.I assume that anybody can subscribe to all SAP Learning hub editions and not just SAP partners or Customers or affiliates. If i am wrong please guide me.
    2) Can SAP learning hub be helpful to me in getting SAP certification?
    Since SAP Learning Hub is cloud-based training solution i found it suitable for me as i can learn it at anytime i want and also pursue my job along with it. i tried to search on SCN and found that for every country SAP has different policies for Training and Certification so I tried to find out using SAP Certification India website that you need to provide a copy of attendance certificate in order to get Associate Certificate.I inquired on helpline whether hours of training taken on SAP learning hub can be considered in training but they are silent on this query as they are not sure whether this can be considered or not. if it is considered how I need to provide the details of hours of training taken to them for certification. So I need to confirm that if i subscribe for SAP Learning Hub will the training taken on SAP learning hub be helpful for me in getting certification and attending Certification Exams.
    I would be very grateful if anybody can guide me on this issue.
    Regards,
    Pratik

    Hi Pratik,
    to your first point I cannot say anything about it.
    to your second point I can
    Learning Hub can give you a hand by getting the certification, but it is not so, that you work through the content there and tata... got your certification. You need to work with the content which is explained there and get in touch with colleagues to get your question answered.
    In my opinion it is a great initiative to get in touch with new things and to be a platform by side to reach the goals. But again, the learning hub itself won't give you a certification at all and if you pass it you might just have a paper saying something....
    Hope I could give you a small clue and good luck with your preferred certification.
    Regards
    Florian

  • Main entrance link for sap BI 7.0 help

    Hello Gurus,
            please give me the main entrance link for sap BI 7.0 help?
    Many thanks,

    hii,
    http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    that is the link for SAP BI
    hope it helps,
    Assigning points is to say thanks.
    raghu.

  • I want to be a good SAP user but please help me how and can i do the right step about SAP

    i want to be a good SAP user but please help me how and can i do the right step about SAP

    Hi,
    you can start learning SAP from an end-user/key-user perspective with the online learning portal of SAP Learning Hub, business user edition.
    Further information can be found here:
    SAP Learning Hub
    Regards,
    Arnold

  • Need help in recruiting SAP Business One Certified Consultant

    Hi Everybody
    I am sure this is not the right place to ask this question. But i did not find any other place as well. I need to know whether there is a forum which helps partner recruit resources.
    We are looking to recruit Certified Functional Consultants with experience for our Hyderabad opertations. Please let me know where i need to post this?
    Abdul Muneem
    [Brio Technologies Private Limited|http://www.brio.co.in]

    You may join in this group to post:
    http://www.linkedin.com/groups?home=&gid=114094&trk=anet_ug_hm
    Thanks,
    Gordon

  • SAP certification question please help

    Hi all;
    I am angeline, I would like to take exam for SAP BASIS NW 7.0, I am reading some SAP BOOKS like
    ADM505 ADM506 - Database Administration Oracle
    TADM10_1_2008
    TADM10_2_2008
    TADM-12-1-2008
    TADM-12-2-2008
    i am not sure where may i start to read is that sequence is ok? is these books are enough for clear exam?, how can i find out some exam transcender like Microsoft MCSE has
    please help me out and tell me easy way to clear that exam and how many papers are coverd ?
    thanks
    and waiting for your good response

    Hi,
    You may try checking these links
    SAP teched Bangalore offers below for professional level.
    [Link|P_ADM_SYS_70: SAP Certified Technology Professional - Platform Technology with SAP NetWeaver 7.0]
    Remaining all on Associate level.
    You can get all the information from below site
    [Link|http://www12.sap.com/services/education/certification/certificationfinder.epx#]
    Regards
    Uday

  • Username and password issue in SAP GUI logon-Please help

    Hello,
    Usually I download the tx.sap file from my work system it downloads and opens the main screen directly.( password is disabled for us). Now when I connect from home(home system through VPN) ,i can download tx.sap file from my company's SAP web portal ,but when I open the same through SAP GUI on my system it pops up a password screen- the issue is my employee ID is already populated in the username tab, but when I provide my domain password (i tried all my passwords),it throws an error -you do not require a password, now when i try without a password it shows fill in all required entry fields. Please assist.

    If you enter just the username, the network is not sure which "AD Domain" to contact tp authenticate you as a user. So you need to specify the domain name in any of the below 2 formats. Give it a try.
    Format 1 - [email protected]
    Format 2 - DOMAIN\UserName
    Hope this helps.

  • A SAP Community member need help to get back in track once again.

    Hi to all  experts and fellow members in  these good community,
    I learned and work as SAP BASIS and Security my previous company for  about a year , but  opportunately I get laid off recently due to cost cutting of the company. Can someone Help me to get back in Track to work with SAP BASIS project again so I could develop more and learned more on these exciting career.
    please advise
    Regards and Thanks,
    Mayalu1627

    SDN does not have a jobs forum, but there was a discussion recently about creating one for community members to find and communicate job possibilities.
    Initially I was sceptical about this, but after a while I changed me mind and think it is a good (community friendly) idea.
    Until then I am afraid the only thing we can offer is advise. Much like any advise elsewhere, you need to "take it as it comes".
    Good luck,
    Julius

  • Add on still exists eventhough SAP B1 exit (pls help..)

    Dear all,
    could you please help me to solve a problem relate to stop add-on in the memory whenever I close my SAP B1 ? I am still seing the application in the tab application on the windows task manager, I try to use this following :
    Public Sub SBO_Application_AppEvent(ByVal EventType As SAPbouiCOM.BoAppEventTypes)
        Select Case EventType
             Case aet_ServerTerminition
                  End
        End Select
    End Sub
    But failed. I appreciate your answer so much. TIA
    Rgds,
    Steve

    This is how it should look like (in C#, sorry)
        private void ApplHandler(BoAppEventTypes EventType)
          switch (EventType)
            case BoAppEventTypes.aet_CompanyChanged:
              /// handle your company change here, usually redoing a SSO
              return;
            case BoAppEventTypes.aet_LanguageChanged:
              /// handle your language change here
              return;
            case BoAppEventTypes.aet_ServerTerminition:
            case BoAppEventTypes.aet_ShutDown:
              /// handle your termination here
              System.Environment.Exit( 0 );
              return;

  • Problem in connecting CRM to SAP R/3  plz help

    Hi friends,
      I am ravi. I am facing problem making connection between CRM to SAP R/3.
    In my pc i installed ECC 5.0 version and CRM 4.0 in Windows 2003 OS.
    He installed CRM server in Virtual Mechine of OS, and ECC 5.0 in normal mode.
    I am starting two servers simultaniously while starting VM and i am working with both
    but i am not able to maintain connection I tried but failed. he installed login pad in
    normal OS. What  have to maintain to make connection between these.
    Please  help me.
    Thank u,
    with regards,
    Ravi

    Hi,
       I used the following Steps to do the process..
    1. Created a logical system in R/3 and CRm Server.
    2. Created a RFC destination in both server.
    3. Assigned an RFC user.
       What is the next step I need to proceed. I struk up with the following steps.
    1. Transaction EWFC0( Configure Action Box)..Created the transaction group (J1f), Created the transaction J1FM.J1F is the namespace for my ADD-ON in R/3.Selected BOR.Given logical system.It asks for the object type and method.
    My doubt is,
    What object type to be selected or Do we need to create the object type for customer specific transaction...if so where?
    After assignening what are the steps I have to do.
    Please help me.
    Thanks
    Mani

Maybe you are looking for