SAP CAL Activation with AWS - Failure

Following Instruction for Getting Started. Followed SCN documentation
Created user, Assigned two groups with with all four policy's @ IAM
SAP CAL still fails to validate.
Also wonder if there is more than one user, How does Cloud Application library authenticate the correct user in AWS.
Kindly help

Hi Kaustubh,
This particular solution has two VMs and you were able to create only one of them because of the following error:
Operation Start failed on step Start Virtual Appliances with message: Start failed for VM SAP ERP 607 on SAP HANA SPS07 due to Amazon Web Services issue : AMAZON : Your account is currently being verified. Verification normally takes less than 2 hours. Until your account is verified, you may not be able to launch additional instances or create additional volumes. If you are still receiving this message after more than 2 hours, please let us know by writing to [email protected] We appreciate your patience. (Service: AmazonEC2; Status Code: 400; Error Code: PendingVerification; Request ID: cec64f67-b058-46ad-a813-be175b78b7fc)
This put the solution instance in status INCONSISTENT and the following Suspend and Resume operations will change the status of the existing VM but will not bring the missing VM up. To do so you may terminate this instance and create a new one. A couple of days should be enough for the AWS verification. If not, I would recommend to contact [email protected] as the error message advises.
Best regards,
Stanimir

Similar Messages

SAP CAL HANA errors

SAP HANA, developer edition 1.0 SPS 09 created from SAP CAL running on AWS.
I am receiving the following errors when executing a query in HANA via jdbc.
The first execution runs for 6 minutes then produces this error:
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [2]: general error: Allocation failed $REASON$
Caused by: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [2048]: column store error: [9] Memory allocation failed
I re execute the query it runs for 25 minutes then produces the same error.
Then the instance is unresponsive.
If I look in HANA studio general overview there is plenty of memory and cpu available to the HANA instance.
There is also a crush dump listed in the log files.
I see the following errors in the indexserver_alert_vhcalhdbdb.trc on the HANA server:
[3742]{-1}[-1/-1] 2015-03-18 18:41:42.430797 e Licensing
LicenseMeasurementPersistence.cpp(00161) : Error storing license measurement for application id '000670', value 26 at ' 2015-03-18 18:41:39.3910000', internal error
[3742]{-1}[-1/-1] 2015-03-18 18:41:42.430999 e Licensing
LicensePluginRegistry.cpp(00394) : Error storing license measurement: internal error
[3732]{300601}[27/-1] 2015-03-18 18:30:16.406867 e Executor
PlanExecutor.cpp(00825) : pop1245 (rc 9, Memory allocation failed)
pop = RowPlanOperator() # pop1245
pop.setDetails('')
[3732]{300601}[27/-1] 2015-03-18 18:30:16.406890 e Executor
PlanExecutor.cpp(00825) : pop1243 (rc 9, Memory allocation failed)
[4437]{300601}[27/-1] 2015-03-18 18:28:13.921145 e Memory
ReportMemoryProblems.cpp(00799) : 8: 0x00007f0b1ba7a8c5 in ptime::TrexPlanOp::executePtimeOp(ltt_adp::vector<Executor::PlanData*, ltt::integral_constant<bool, true> > const&, ltt_adp::vector<Executor::PlanData*, ltt::integral_constant<bool, true> > const&, TRexCommonObjects::TRexApiError&, Executor::ExecutionInfo const&)+0x41 at trex_plan.cc:340 (libhdbcswrapper.so)
The memory errors are repeated many times.
What is the recommendation to investigate this issue?
Thank you.

The file indexserver_alert_vhcalhdbdb.trc contains the following errors:
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 1: 0x00007f049f94df0a in _ZN5ptime3pcc16MonitorAllocBase14throwExceptionEv.isra.53+0x22 at pcc_MonitorAlloc.h:61 (libhdbrskernel.so)
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 2: 0x00007f049f9403f5 in ptime::Transaction::Transaction(ptime::Connection*, bool, bool, bool, bool)+0x18f1 at pcc_MonitorAlloc.h:114 (libhdbrskernel.so)
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 3: 0x00007f049ca15949 in ptime::TrexTempIndex::clearIndex() const+0x25 at trex_itab.cc:3020 (libhdbcswrapper.so)
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 4: 0x00007f049eb7bd74 in ptime::TrexObjectFactory::destroyTrexTempIndexObject(char const*, char const*, char const*)+0x40 at trex_object_factory.cc:1386 (libhdbrskernel.so)
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 5: 0x00007f049ca4e706 in ptime::TrexPlanData::~TrexPlanData()+0x1d2 at trex_plan_data.cc:49 (libhdbcswrapper.so)
6: 0x00007f049ca4e849 in ptime::TrexPlanData::~TrexPlanData()+0x5 at trex_plan_data.cc:53 (libhdbcswrapper.so)
7: 0x00007f04c44739ed in Executor::X2ConnectorValue::deleteItsValue()+0x29 at X2.cpp:323 (libhdbexecutor.so)
8: 0x00007f04c4488101 in Executor::X2::failPop(int)+0xb0 at X2.h:176 (libhdbexecutor.so)
9: 0x00007f04c44879b4 in Executor::X2::finishValue(Executor::X2ConnectorValue&, int&, bool)+0x110 at X2.cpp:920 (libhdbexecutor.so)
10: 0x00007f04c4488163 in Executor::X2::failPop(int)+0x110 at X2.cpp:3571 (libhdbexecutor.so)
11: 0x00007f04c44879b4 in Executor::X2::finishValue(Executor::X2ConnectorValue&, int&, bool)+0x110 at X2.cpp:920 (libhdbexecutor.so)
12: 0x00007f04c4488163 in Executor::X2::failPop(int)+0x110 at X2.cpp:3571 (libhdbexecutor.so)
13: 0x00007f04c44938d0 in Executor::X2::runPopTask(Executor::X2::PopTaskInfo&, int&, ltt::allocator&, ltt::allocator&)+0x1290 at X2.cpp:3548 (libhdbexecutor.so)
14: 0x00007f04c4494e32 in Executor::X2::runPopJob(Executor::X2Job*)+0x80 at X2.cpp:2956 (libhdbexecutor.so)
15: 0x00007f04c44956b8 in Executor::X2Job::run(Execution::JobObject&)+0x224 at X2.cpp:5294 (libhdbexecutor.so)
16: 0x00007f04ab3ec1fe in Execution::JobObjectImpl::run(Execution::JobWorker*)+0x72a at JobExecutorImpl.cpp:822 (libhdbbasis.so)
17: 0x00007f04ab3fadd2 in Execution::JobWorker::runJob(ltt::smartptr_handle<Execution::JobObjectForHandle>&)+0x2e0 at JobExecutorThreads.cpp:205 (libhdbbasis.so)
18: 0x00007f04ab3fbd24 in Execution::JobWorker::run(void*&)+0x1a0 at JobExecutorThreads.cpp:370 (libhdbbasis.so)
19: 0x00007f04ab433759 in Execution::Thread::staticMainImp(void**)+0x875 at Thread.cpp:492 (libhdbbasis.so)
[4175]{300560}[23/-1] 2015-03-19 10:57:26.017346 e Executor
X2.cpp(02961) : 20: 0x00007f04ab4343bd in Execution::Thread::staticMain(void*)+0x39 at ThreadMain.cpp:26 (libhdbbasis.so)
[4190]{300560}[23/-1] 2015-03-19 10:57:26.576080 e Memory
ReportMemoryProblems.cpp(00799) : OUT OF MEMORY occurred.
Host: sid-hdb
Executable: hdbindexserver
PID: 3599
Failed to allocate 131088 byte.
Current callstack:
1: 0x00007f04ab5a07fd in MemoryManager::PoolAllocator::allocateNoThrowImpl(unsigned long, void const*)+0x2a9 at PoolAllocator.cpp:1139 (libhdbbasis.so)
2: 0x00007f049dcfca79 in ptime::pcc::SingletonAlloc<ptime::pcc::MonitorAlloc<ptime::pcc::HeapAlloc>, ptime::pcc::GlobalScope>::allocate(unsigned long)+0x15 at pcc_MonitorAlloc.h:97 (libhdbrskernel.so)
3: 0x00007f049e095b50 in ptime::fastvector<void*, 16ul>::__allocate(unsigned long)+0x50 at fastvector.h:325 (libhdbrskernel.so)

SAP CAL issue Activating HANA instance on AWS

My CAL instance of openSAP Course: Introduction to Software Development on SAP HANA 2013.01 is stuck in Activating status. I had previously deactivated my AWS account, and have now reactivated it. I got an error when trying to active the instance that my AWS account did not have the services required for the instance, and now I seem to be stuck in between creating the instance and the instance actually getting created. My AWS account is active, and I entered the security keys on the CAL side, but it is not working. Any help would be appreciated.

Hello Eric,
The instance entered in a state that does not allow to disappear from the list after the termination. We (the SAP CAL Team) just fixed the instance manually and it should disappear from your list. I also would suggest you to double check that there is no created instance in AWS console also.
Now you can create a new instance.
Best Regards,
Kremena

SAP Message No-KL 294 Network Activity with invalid Internal Number

Hi,
I am getting System Error:NETWORK ACTIVITY WITH INVALID INTERNAL NUMBER" while doing MIGO.
I have checked network activity assigned to PO is exist but this shows some internal Number "Plan no.f.oper." which does not exist.
Please let me know how should i solve this error.
thanks
Sunil

Hi Sunil.
Did you get any response from SAP?
I have as similar or maybe the same problem.
And I found out:
When I create the purchase request out of the Project-Builder (CJ20n) - SAP seems to lose the entry of the field 'AUFPL' in the table 'EBKN'.
In these rare cases (this problem is only in about 2-3 % of our purchase requests) the network elements still exist - so they are not deleted or something like that.
I created a routine, in which I read the entry of 'AUFPL' with the corresponding network number out of table 'EBKN' as key, to correct these wrong purchase requests.
But I didn't find the reason for the problem, yet.
Every advice would be great,.
Best regards,
Marc

Error trying to activate HANA through SAP CAL

Hello,
I am encountering the following error when I try to activate AWS HANA through SAP CAL
"We are sorry, we cannot provide you with the solution due to the results of an export control check"
There seems to be a solution floating around but I can't seem to find the details.
Thank you in advance.
Jeff

Hi Stanimir, I am facing the same issue when trying to activate
1. openSAP - BI Clients and Applications on SAP HANA
2. SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7 BYOL
error message
"We are sorry, we cannot provide you with the solution due to the results of an export control check."
Can you please help me ?
Sharan
[email protected]

SAP HANA ERP on AWS License Issue

Hi,
what licenses are available for the ERP version of SAP HANA for deployment on AWS? What is a MINISAP license? We tried to set up the ERP Trial from the SAP Cloud Appliance Library but can't access it via SAPGUI. Our expert says, the MINISAP license is valid for hosting on 64GB or less. Since we have chosen the smallest memory model available, it looks like we can't run it on AWS, which cannot be true. The system comes up, AWS charges money, but we can't access it. What did we do wrong? Seems like a few people here in this community use it already. I'd appreciate someone telling us how to fix this issue. We do not have problems with our BW instance which works well.
Best regards,
Chris

Hello Christian,
Trial systems in CAL come with a 30 day temporary license, already included. There is no need to install any other license into the system.
So your problem is, that you started an instance of the ERP Foundation Extension Trial System in CAL using your AWS account and you used the default settings in CAL (no changes to firewall or instance types. After 30 minutes or so the traffic light in the CAL UI under "INSTANCES" shows a green light - but you are still not able to connect with SAPGUI.
Is this correct? If so, there are two possible root causes:
1) your client machine is not in the same network as the ERP system. Could it be the case that your client machine is in a corporate network (behind a firewall) and the ERP system has been started on the internet?
2) the ERP on HANA system did not start automatically (which is very strange as everyone is using the same appliance). It could be the case that the AWS account has limits which prevent the instances to start up - but then CAL should give you an error message and it should NOT show green traffic lights in CAL.
Can you please check if you are affected by root cause 1).
If you can rule out 1) we need to investigate why 2) is happening. Can you please ssh into the HANA instance and fetch the dev_disp file from /usr/sap/<SID>/DVEBMGS00/work.
Regards,
Hannes

Terminate CAL instance error - AWS credentials

Hi there,
I'm on a slightly misleading 'free' Fiori course via openSAP.
Once I realised 'free' meant that I may be charged hundreds of dollars by AWS I canceled/closed my AWS account.
Unfortunately I can't seem to now delete my CAL instance because it's trying to verify my credentials with my non-existent AWS account
Not quite sure how to get me out of this? Is there anyone that can help?
Thanks in advance,
Rob

Hi Rob,
The “undefined” instance stayed in SAP CAL although no VMs left in AWS after the terminate operation. The SAP CAL Team is working on a solution to clean-up such instances.
Apologies for the inconvenience,
Stanimir

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

CAreer in SAP BASIS comaprision with SAP GRC/Security

Hi Everyone,
I am an SAP BASIS consultant with 2 years of experience working in a MNC company,
I want to change my career to SAP GRC/SAP Security, i have some basic knowledge on SAP Security,
COuld you please advice me, which one to choose,?
Does SAP GRC/Security has demand , and can we get oportunities to work abroad compared to SAP BASIS ?
which one has more scope SAP BASIS or SAP Security/GRC ?
Because in BASIS, i am not getting enough scope to work on some good things like Installation, upgrades, Migration,
i am doing a very basic kind of work like tranports, job scheduling, monitoring, and other small activities ?
So request you people to advice me ?
<removed_by_moderator>
Read the "Rules of Engagement"
regards
Rakesh Rao
Message was edited by: Juan Reyes

Hi Rakesh
I saw your post in GRC and was waiting of it to appear here
First up - 2 years is still junior. You may find batch jobs, transports, monitoring, etc all mundane but it is a foundation and learning ground work and foundations to being a good Basis Administration. And one things for sure, an awesome basic (I name my best-techy-friend) makes a huge difference on project timelines and deliverables for the rest of us.
Installation and Upgrades come with time. Whilst still performing junior tasks you could focus on reading up on approaches in case an opportunity in your job comes us and be prepared to prove to your management that you are ready for a bigger responsibility.
Switching to GRC/Security would be pointless unless you have a desire to learn GRC or Security. These are my background and they are undervalued until things go wrong (insurance policy in a way).
If you do switch you will reset your 2 years of domain experience back to 0 and you will start off with password resets and basic user administration
It takes time to work through the ranks. It was 3 years before I got to build my first role. I spent my first few years in security on email chasing approvals, password resets, user account creation, running reports for audit - sounds familiar to what you are doing now?
You have to master the basics before you are trusted and ready for the more complex activities. By knowing what you are doing now you will be more successful when the time comes to step up and do migrations, upgrades and installations. Support production by mastering you technical analysis skills is how you can break through being a fresher/junior
Regards
Colleen
Ps - if your motivation is more than "good things" happy to answer questions specific to security and GRC.
Also, boring doesn't mean it can't get interesting nor does it mean it's a worthless activity: SPAU transport imported before patching!!
Message was edited by: Colleen Lee
Added link for when transports go bad

Integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?

What is the best way to integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?
Details about expected process Flow.
Receive PO from customer into SAP > SAP SD creates Sales Order > ?? SAP Integrate with External non-SAP Purchasing Application to trigger purchasing > External non-SAP Purchasing Application creates PO, Ships Material to Customer Ship to address (drop ship), Sends Shipping confirmation (FCR) & Invoices to SAP> ??Receive FCR and Invoice in SAP > ?? Initiate SAP Accounts Payable (Vendor Payments) and Accounts Receivable (Customer Invoice) > ?? Update SAP SD Sales Order with shipping status>
Questions we need to answer;
- How to achieve '??' steps from above process.
- What type of Master Data we will need to configure (Say Materials Item Category, Type etc.)
- Any standards options to configure SAP SD (Type of Sales Order)
- We certainly don’t want to trigger SAP MM Purchasing (i.e. PR, PO etc.). How can we bypass it.
- How to make statistical receipts against sales order line items so that SO status will be updated.
- How to receive Invoice and FCR from External non-SAP app to trigger AP and AR transactions.
- Are there any SAP standard configurations/ BAPIs/ BADIs available to achieve this integration.
Any inputs on above questions are appreciable.
Anand.

This question is resolved. We ended up activating purchasing module and used purchasing documents PR/ PO to integrate with third party purchasing system.
Anand.

Create business activity with products

Hi,
I am Trying to create a business activity with products. Adding Activity Journals TAB in the activity u201CBus Act.:With Prodsu201D. The issue is that when I am trying to make a Journal template type in (CRMM_JOURNAL : Define Activity Journals) I am not getting my own transaction type under Transaction Type option (I have copied my own transaction type from the standard u201CBus Act:With Prodsu201D activity). I only get the standard activity type (0020 :Bus Act.:With Prods) in my drop down box. (attached is the screen shot)
Any ideas
I am using SAP CRM 5.0.

Hi,
first your transaction type has to be active.
Next, you need to assign item categories ACT0, ACT1 and ACT in SPRO, in order to use activity journals.
All three.
Regards

SAP SB1 + Active Directory

Hi,
It´s possible to integrate the sap sb1 login with the Microsoft Active Directory?
Best Regards,
Tiago

Hi Tiago,
I don't think that is possible. Simply because, B1 has to set and maintain its own user profiles. Could you list the advantages and disadvantages if the future version works like you want?
Thanks,
Gordon

SAP CAL HANA - Connectivity issues

I deployed SAP HANA on AWS through SAP CAL.
I can connect to the HTTP interface and the HDB through the command line.
hdbsql=> \c -i 00 -u system
Password:
Connected to HDB@vhcalhdbdb:30015
hdbsql HDB=>
But if I try to connect to port 30015 remotely I just timeout. I have the 30015 open to the world in the AWS security group.
Is there a daemon that runs on the server that accepts remote connections or do I have a AWS network issue I need to investigate?

Hi Joseph,
Most probably you are behind a corporate firewall that does not allow you to connect to port 30015. Could you try to connect from another network?
Best regards,
Stanimir

SAP CAL - Free Solutions - Try Now

Hi,
I registered SAP CAL (cal.sap.com), but once I tried Free Solution and Try Now button, it does not work.
According to one openSAP documentation, it is supposed to show "Term and Conditions", but nothing happens.
I was suspicious about the browser settings, I tried many things including IE9 and Chrome, but no help!
Any advise, help, thank you.
Tuncay Karaca

Hi Tuncay -
I was facing the same issue with IE9 and Chrome. I tried the same in IE10 and it worked. I am not sure what the issue is. I did not have any customizations in my broswer. It still does not work in IE9 and Chrome. Thankfully I have access to IE10 and I am able to make it work.
Regards
Nikhil

Extending TaskOutput for a Human Activity with WebDynpro UI

Dear Experts,
For my process I need to change some data object values in my context using WebDynpro UI. For that I would typically use a Human Activit with WebDynpro and some output mappings on
TaskOutput->UIResponse->MyTaskCompleteEvent->xxx.
But in my case I don't want to close the task. I want to use a different Event for the mapping without completing the task. Something like:
TaskOutput->UIResponse->MyTaskChangeContextEvent->xxx
But I couldn't find a way to extend the TaskOutput and UIResponse to be able to use other custom events for output mapping.
I would appreciate any help.
Thanks,
Koray
Edited by: korayyersel on Aug 19, 2011 9:49 AM

Ok, you can not update the BPM context without completing the task. You can have temporary data store in CAF (with default data source or external data source) and you can store/retrieve the data temporarily using JPA (Java Persistence API).
You can refer the below link for more details: http://help.sap.com/saphelp_nwce72/helpdata/en/47/d67d5357a34ac5e10000000a42189d/content.htm
http://help.sap.com/saphelp_nwce72/helpdata/en/4a/9e7b9845816c3de10000000a42189c/content.htm
So you can call EJB/Web Service from WD task to save the changes and when user reopens the task you can retrieve the data from DB and show to it to the user.
Thanks
Abhilash

SAP CAL Activation with AWS - Failure

Similar Messages

Maybe you are looking for