SAP CATALOG CSV 2.0 : Update problem

Hi,
I have a problem with the update of a field.
Particularity of the field
- Type C 1 character
- Value possible X and blank
When the original value is Blank, and the new value in the file is X, the update work properly.  When the original value is X, and the new value is blank, the system don't consider the value in the file and don't update de field.
Do you have a solution for me ???
Thank in advance

Hi Masa
Thanks for your answer.
I might be able to use lets say the product ID or the vendor number as the Item Valuation. I've actually thought about that myself, but I wasn't shure if that was applicable.
I have one additional question. What if I want to delete items? I have read that it's only possible with a full upload?
Best Regards
Maria

Similar Messages

  • Upload Material Master to non SAP Catalog

    Hi Guys,
    we are trying to create a process to upload Material Master and/or Purchasing Info Recordes data directly from the backend into an non-SAP catalog. So far I only know about report BBP_CCM_CATALOG_TRANSFER, that uploads replicated material master from SRM into CCM or MDM Catalog.
    Are there reports available in the backend  (ECC6 EhP3) or in SRM 700 that could extract the data from Material Master and Purchasing Info Records into a format (XML;CSV,..) that could be used to upload these data into a catalog manually or via PI.
    Any hints are welcome!
    Thx
    Dieter

    Hi Dieter,
    Yes you can run MECCM in your ECC system to transfer PIR and contracts as XML files.
    Regards,
    Nikhil

  • Update problem - VBDATA table

    Dear All,
    We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
    Sometime the UPD and UP2 work processes hung without apparent reason.
    In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
    In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
    Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
    As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
    The Production and the Developer systems seem not affected by this problem.
    Have you got any idea about the reason of the problem?
    Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
    Thanks in advance,
    Federico Biavati
    My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

    Hello Siva,
    This is what I did:
    > Check how many entries do you have in VBDATA currently.
    More than 1.000 in every SAP systems that Iu2019m creating from Production
    > You might want to run the reorganize updates program to clear the old updates
    > that are pending/in error
    Good point!!
    After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
    Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
    Thanks for you help,
    Federico

  • Details Data in SAP BI could not be updated completely: see log

    Hi ,
    I need some help, while creating the campaign i am getting below error
    Details Data in SAP BI could not be updated completely: see log
    Diagnosis
    A problem occurred as data was being saved in the BI system.
    System Response
    The data can not be completely saved in the BI system.
    Procedure
    For more information about the reasons for this, see Messages
    I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
    SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
    But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
    Appreciate if you please help me on this issue.
    Regards,
    Raj Mittal

    Hi ,
    I need some help, while creating the campaign i am getting below error
    Details Data in SAP BI could not be updated completely: see log
    Diagnosis
    A problem occurred as data was being saved in the BI system.
    System Response
    The data can not be completely saved in the BI system.
    Procedure
    For more information about the reasons for this, see Messages
    I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
    SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
    But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
    Appreciate if you please help me on this issue.
    Regards,
    Raj Mittal

  • SAP office Express info-the UPDATE is terminated as received from the user"

    Hi Sap Gurus,
    I am facing a problem which I failed to find out why.
    The case is in Network Activity I have attached components of Type "N" type i.e, non stock item.I tried to run MRP but with no effect.
    Now the problem is whenever I am trying to attach further components of "N" type & save it ; s message is coming thru {{ SAP office Express info }} stating that {{Express document " the UPDATE is terminated as received from the user" X ".
    Where from this message is getting generated & that to only for " n " type component.
    How to eleminate this error.
    2. Same problem is coming at the time of creation of user defined Characteristics.
    This has become very urgent otherwise I could not proceed further.
    Pl. Help.
    I am attaching the screen shot of the problem .
    Regards,
    A. Bose.

    Hi,
    Please use the T.code SM13 where there was an error and  click on the Repeat update icon
    Check the Error.
    Also check T. Code: ST22.
    Is the number range assigned to the Purchasing documents in OMH7, or are they exhausted. check if any workflow or user exit is active.
    hope it helps.
    thanks,
    Reward points if found useful.

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Is it possible to run a script each time a .CSV file is updated?

    I am having trouble with a script I am trying to write, which is made up of two parts:
    A .CSV file generated by PHP/MySQL whenever an RSS feed is updated. The contents of the .CSV are overwritten each time the PHP runs.
    A DataMerge script, written in JavaScript.
    What I would like to do is run the DataMerge script each time the .CSV file is updated. Is this possible, perhaps using an Event Listener within the PHP to trigger the DataMerge script? Or am I approaching this in the wrong way? I'm grateful for any thoughts you might have. Thanks, F.H.

    I would use Rorohiko's APID ToolKit: http://www.rorohiko.com/wordpress/indesign-downloads/active-page-item-developer/
    It has fileChanged event that is sent after the observed external file has changed.
    sorry guys for "labouring the point", but I'm working on very advanced project - and I need to know what my tool can or can't do
    and in this case - using APID will break point 2.3 of EULA, right ? interaction with external datasource - without user action ?
    robin
    www.adobescripts.co.uk

  • Chart x scale update problem

    LabVIEW  8.5.1
    Sweep Chart Problem
    The x scale values do not update until after the 2nd sweep.  The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
    It appears to be a problem with the chart, since it happens with any vi with a sweep chart.  I've used versions 6 through 7 for years and never seen this.  I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
    I've included a simple example.
    Thanks much,
    JSC321
    Attachments:
    Chart Sweep Scale Update Problem.vi ‏32 KB

    You have a typical race condition!
    There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
    All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
    (Execution order is enforced even if the wire value is not even used inside the loop )
    Try it!
    Message Edited by altenbach on 12-23-2008 11:08 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    HistoryRace.png ‏10 KB

  • Button to import a csv file to update an existing table

    hi ALL,
    I'm pretty new with apex, on a page f my application, I want to add a button to import a csv file to update an existing table.
    Have you any suggestions?
    thanks in advance

    Hi,
    an easy solutuion would be if ypu could place the CSV file on a location which your database can access.
    Access the CSV via an external table (CSV file can be accessed as if it was a readonly table ).
    Create a dynamic action (PL/SQL) for the button which reads the external table and adds the data to your target table.
    Cheers
    Bas

  • Unable to save PDF file to local drive from sap after Above reader XI update.(Not as sap issue ,this is related to Adobe)

    Hi All,
    Users are unable to download/save file from sap after a adobe XI update.(no pop comes to save/open)
    Surprisingly,i am able to do so on my system without any adobe plug ins disabled or any registry editing.
    This is a strange behaviour and need to be resolved Asap....
    I contacted sap..this is not sap issue..this is a pure adobe reader bug.
    Please need help on this experts
    Feel free to comment for further details
    kind Regards,
    Sumit
    Mail me at [email protected]

    Hi ,
    Please tell us a lot more.
    - Is SAP running a local process, or something in a web browser?
       sap is running via SAPGUI ,no java system
    - What system?
      Users facing issue in all system
    - What browser?
    IE 9.0.28
    - Can PDFs from other sources be downloaded?
    Yes,they are downloaded.
    More Details-I did some tricks below which resulted in open/save popup......tht is not recomended by IT team...i need a permanent solution
    In IE, goto menu Options -> "Manage
    Addons", select in box "Show:" "Run without
    permission", then you see the Adobe PDF plugin
      Ichanged status to "Disabled
    Also, if i change the registry key settings for users as
    HKEY_CLASSES_ROOT\AcroExch.Document.11
    Value: EditFlags
    Changed: 0x00000100
    to 0x00000000
    (Remove the "Open always with this
    program" option)
    ITS WORKING.....
    But,in my system i need not to do all this settings and surprisingly it is working  only for me,rest all users are facing this issue.....
    If any one using Lync ,communicator ..do let me know..i wil show  the actual scnerio.
    Kind Regards,
    Sumit

  • Updating problem...I have a update that starts out going through but then does not finish just keep running

    also with the update problem it says software update and below the running bar it says connecting to the server

    Please do the following:<br><br>
    #Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop.<br><br>
    #Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
    #Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
    #Finally run the installation file you downloaded to the desktop earlier.<br>
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

  • SAP-Basis System: 1 possible network problems detected - check tracefile

    Dear Gurus,
    I am getting this error in syslog in MMC for ECC 6.0 on windows with db2.
    SAP-Basis System: > 1 possible network problems detected - check tracefile and adjust.
    Regards
    Rao.

    hi,
    can you look at this
    [http://sapbasisnotes.blogspot.com/2009/05/sap-startup-problems-in-windows.html]
    Regards,
    Muralidhar

  • Com.sap.caf.mp.base.exception.EngineException: Problem in server response:

    Hi,
    I have created one CAF application,which is having one external webservice and one application service.Webservice takes two input parameters(string,boolean) and it returns an arraylist.
    So when i test the CAF application on the CAF service browser it is giving me error like " com.sap.caf.mp.base.exception.EngineException: Problem in server response: [Bad Request]."
    I am getting this error while creating object of web service.
    Can anybody help me on this issue..
    Thanks in Advance

    It looks like you are not authorized to execute the webservice. Check the webservice authentication settings.
    Peter

  • 10.5.7 update problems

    After installing the 10.5.7 update, Mail, iTunes and iPhoto will not run anymore. Anyone else having this problem?

    jjtopspin wrote:
    Before I came to these apple discussions re: update problems with 10.5.7, I tried to update this version yesterday and at the end of the download this message came up, the update "Mac OS X update" can't be saved. The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed to Apple.
    I got the same message. The downloaded file that generated the message was only about 560 KB, indicating it was an incomplete download. I moved it to the trash & tried again. The second download attempt succeeded. I had a minor if nerve-wracking issue with the update (the blue looping screen reported in another topic in this forum) but after a forced shutdown & restart the update was completed successfully.
    I have since updated my two other Macs so all those listed in my profile are now running 10.5.7. All do so without any problems & in fact work better & more stably than ever before.
    I doubt that I'm unusual in this respect. Some users will have problems but I believe most won't, & for those that do most problems will turn out to be caused by something other than the update itself. So it has been for every previous Leopard update; I see no reason to think this one will be any different.

  • Cache update problem in Integration Directory

    Hi all,
    We have a cache update problem in our PI development server.
    If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
    We have tried:
    1. Clearing the SLD Data Cache.
    2. Did SXI_CACHE complete refresh.
    3. Did CPA cache refresh.
    4. Did a complete cache refresh of the server.
    5. Restarted the server.
    But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
    Thank you very much.
    regards,
    Jack Nuson

    HI Jack ,
    first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
    Perform a full cache refresh using the URL
    http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
    Regards,
    Saurabh

Maybe you are looking for