SAP CCMS Data Supplier

Hi All,
Present we are using CRM 2.0 B.
Is it possible to configure the CCMS to this?
How can we use CCMS to monitor the SAP standard transaction codes?
Thanks in advance.

Hi,
For installing/registering CCMS Agent (CCM3x, CCM4x, CCMSR etc),you can refer to the below provided link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/77/d9ba3b3bf00152e10000000a114084/frameset.htm
After installing any CCMS Agent, you can check(or monitor) for Availability & Performance specific data using T Code RZ20.
Also T Code RZ21 can be used to configure the Monitoring : methods & properties .
I hope this will help u.
Best Regards,
Pradeep Bishnoi

Similar Messages

Creation of CCMS Data Supplier

Dear All,
Please could you help us with the following. The standard MTEs that SAP provides do not provide somefunctionality such as
1) Alert Generation when the number of background jobs that are aborted in LAST HOUR reaches a threshold
2) Alert Generation when the number of shortdumps in LAST HOUR reaches a threshold
3) Alert Generation when the number of update failures in LAST HOUR reaches a threshold
Please could you provide the code of any such datasuppliers that were customized for such functionality.
Is there any other way we can acheive this without writing the Data supplier?

Hi Suresh,
You can do the recording for the transaction MM01,
and create your own Z Program for it,there you can execute your BDC for required number of fields.
It will upload data through your transaction for your required number of fields.
Regrds
Mansi

Where can I find "writing a Data Supplier" White Pages

I am trying to write my own Function Module for CCMS.
I read the following document from "https://cw.sdn.sap.com/cw/docs/DOC-17760".
This documnet has the following line:
The following overview documentation confines itself to passive data suppliers under ABAP. For a complete description of the interface, see the document Writing a Data Supplier.
To download the document, start the SAP Developer Network (http://sdn.sap.com), and go to the SAP NetWeaver Developers' Guide Quick Link. Choose Application Development u2192 System Management u2192 System Management Development, and in the ABAP System Management area, select the specified document
I have spent couple of hours and was not able to find the path given in SDN. I have found SAP NetWeaver Developers' Guide, but do not see Application Development.
I appreciate any help to find this document.
Ray

Hi Ray
Try this
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/b2548389-0901-0010-3486-f511248c428b [original link is broken]
Cheers
Stuart

Technical System (Application Server ABAP) - problem with data supplier

My system had problems, I believe with the Data Supplier in LMDB
there are errors
How can I update / re-add in the SLD/LMDB data supplier?
And how can you get it working correctly providers who do not receive the data (though the system sees them)

Hi Michael,
You can push an update from Solution Manager (the data supplier) to the SLD in transaction RZ70. There should be a button labeled "Start Data Collection and Job Scheduling". If your jobs are scheduled and everything is set up correctly, then starting your data collection will force an update ahead of schedule. (By default, the update is scheduled every 720 minutes -- i.e. 12 hours).
On the Java side, you need to push via the Visual Administrator (when you're at NW 7.02, that changes in 7.3 to the NWA), but you didn't ask that.
Typically, LMDB grabs an incremental update from SLD every 10 minutes or so. Check for a job called SAP_LMDB_LDB_0000000001. If your SLD-LMDB connection is not working properly, you may need to reset it. (SOLMAN_SETUP (as solman_admin or equivalent). Then system preparation -->5 Prepare Landscape). See SAP help on this Synchronization Between SLD and LMDB - SAP Solution Manager - SAP Library.
Also, on the first screen you showed, System Landscape Technical System - Display, if you click Edit, then click on the advanced button, there is an option to Resynchronize Technical System from SLD. I haven't tried that, but that may actually be what you're looking for.
I hope this helps!
Best regards,
--Tom

I canu00B4t configure the data supplier targets.

Good Morning.
I have a system SAP ABAP + JAVA Netweaver 2004s, with Windows 2003 Server and Oracle 10g.
When, I try to configure the data supplier targets, of the SLD. I have the following message error:
Can't store new target Error during write access to secure store (caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException)
How can I solve the problem??.
Best regards.
Luis Gomez.

Hi
Please check the SLD planning guide at
System Landscape Directory (SLD)
For details of how to setup sync options and what version and SP level these are available from
Best wishes
DStuart

Data Supplier: PO to SolutionManager - XI components missing

Hello experts,
we have setup a data supplier connection from our Process Orchestration SLD to the Solution Manager SLD. We have set this up on PO via SLD -> Administration -> Data Suppliers where we have added the Solution Manager SLD as updated SLD.
These are the versions of the two SLDs:
SLD Solution Manager:
SLD Process Orchestration:
Version 7.30.249
Now the problem is the following:
For setting up central PI monitoring in Solution Manager, we need to have the PI domains in the Solution Manager SLD available. Unfortunately the PI components are not registered as technical system type “Exchange Infrastructure” in the Solution Manager SLD and therefore also no PI domains are available. The list is empty:
The system is registered as Web AS Java system in the technical systems instead of type “Exchange Infrastructure”:
In the PO source SLD, all PI components are registered correctly including one single domain with the same name for all PI components (therefore we have no name inconsistencies):
I know that the domain names are not automatically transferred via the data supplier connection. This is described in SAP Note 1631346.
However we don’t even have the PI components properly listed as XI technical system components in the Solution Manager’s SLD.
Any ideas?
Thanks a lot for your assistance and Best Regards
Harald

You have to sync your PO SLD to SolMan along with setting up the sync back on SolMan to the PO SLD.
Have you been to the wiki on PiMon and looked at this doco? http://scn.sap.com/docs/DOC-3220

SLD Data Supplier User is locked at regular intervals

Dear Sirs,
I have a Webdynpro application using two JCO connections to the backend to fetch data. One day it just stopped working. After some searching I found out that my SLD Data Supplier user was locked in the UME, due to too many failed logins.
When I unlocked this user everything worked again. Next morning when trying the application, the SLD Data supplier user was once more locked. If I lock it up it works, but it stops working again at fairly regular intervall (due to too many failed logins).
The time it stops seems to be 15 minutes over each hour; however sometimes it seems to work for more than an hour some times less. This makes me belive that there is some kind of regular job which mess it up.
Below is an extraction on what is going on in the logs around the time it stops working.
I know others have had these kinds of error messages in conjunction with XI, but did not find a solution of the forum with fits me.
Any hint on how I can solve the problem, or find out why the user gets locked is appriciated :=)
java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine.DefaultRequestHandler.handleRequest(JCO.Function function) anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:775 /System/Server 08/01/2006 java.lang.reflect.InvocationTargetException
com.sap.engine.services.rfcengine anonimus J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:774 n/a 08/01/2006 Thrown: om.sap.mw.jco.JCO$J2EEAbapException: (126) SLD_CLIENT_EXCEPTION: AbapSLDRequestHandler.ping(): server connection *** failed *** on Tue Aug 01 13:15:02 CEST 2006 at com.sap.lcrabapapi.util.AbapSLDRequestHandler.raiseAbapException(AbapSLDRequestHandler.java:4184)... [see details]
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:771 /Applications/SLD 08/01/2006 Caught a JCO.J2EEAbapException while processing a JCO request. Check the RFC engine for sanity and check your server logs and traces for more information.
com.sap.lcrabapapi.ejb.AbapSLDRequestBean sap.com/com.sap.lcrabapapi J2EE_GUEST host.domain.com Server 0 XX_XXXXX
Error 13:15:02:767 /System/Server 08/01/2006 User J2EE_GUEST, IP address
Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available].
com.sap.engine.services.httpserver n/a J2EE_GUEST host.domain.cp, Server 0 XX_XXXXX
Error 13:15:02:742 /System/Server 08/01/2006 User J2EE_GUEST, IP address

Hi Jørgen,
This problem must be due to the user being entered with an incorrect password in one of your systems which accesses XI. I'm afraid the only way to find it is to go through all your systems' RFC destinations, transaction SLDAPICUST, and anywhere else the user info might be entered.
I would normally recommend creating a separate user for each system accessing XI, so that in cases like this it is far easier to narrow down the search.
Regards,
Thorsten

Can SAP/CCMS automatically clear the RZ20 alerts after 30 days?

Can SAP/CCMS automatically clear the RZ20 alerts after 30 days?
And if so, how?

Hi William,
You can reorganize the completed alerts using the analysis method for AlertsInDB. The method deletes older alerts that match your specifications and reduced the space occupied in the database. To do this, proceed as follows:
   1. Choose CCMS ® Control/Monitoring ® Alert Monitor, or call transaction RZ20.
   2. Expand the SAP CCMS Technical Expert Monitors monitor set, place the cursor on the CCMS Selfmonitoring monitor, and choose Start Monitor.
   3. Expand the alert monitoring tree. You will find the monitoring object for which you are looking under CCMS_Selfmonitoring ® Runtime ® AlertsInDB. Select the object and choose Start Analysis Method.
   4. Specify the date and time from which completed alerts are to be deleted.
Regards,
suraj

Cannot load required classes for service SLD Data supplier

Hello Experts,
I am trying to use the SLD Data supplier service from visual administartor for registering my DEV EP 7.0 engine in central SLD.When am trying to access that particular service from visual admin,it is throwing an error saying that:"Cannot load required classes for SLD Data Supplier service and please refer the not for resolution Note No:1017526.
My NW EP 7.0 is at SP17 level and as per the above note all settings are fine and the relevant application is also started well.
Please suggest us for any possible solution.
Thanks&Regards,
Apparao S.

> You can also try the following: Move sldserv.jar from
> /usr/sap/<SID>/<InstID>/j2ee/cluster/server0/bin/services/sld/
> to
> /usr/sap/<SID>/<InstID>/j2ee/admin/lib/
Hi Desiree,
Thanks, worked for me too.
Only in my case, when I moved the file, the sld data provider service did not start at all after reboot of the instance.
Also, the sap.com/tcsldwd~main application refused to start.
I then copied the file back, this time maintaining an entry in both locations and reboot the instance. Everything started working after I reboot the instance. The error also disappeared and I was able to change the SLDuser password.
Thanks
Prasad

SLD Data Supplier

Hello Experts,
Can you please clarify below queries regarding SLD Data supplier.
in Visual admin>server>services-->SLD data supplier
1.How to reterive Http settings(host,port,username,password) and CIM client generation settings((host,port,username,password)) through Java programs?is there any specific JAVA API is there?
2.Http settings,CIM client generation settings where it will stored? shall i see in http://<hostname:port>/SLD
Regards,
Manivannan P

Hi Manivannan,
Please check the [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
Best Regards
Arun Jaiswal

SLDDSUSER authentication failed in SLD Data Supplier

Dear SAP gurus,
Here i am facing a problem in EP production system.
SLDDSUSER id is locked out frequently.
In visual admin tool,SLD datasupplier ,the http connection for SLD clients test is failing.
i am getting the error " Failed to generate and test CIMOMclient object".
After i reset the password of SLDDSUSER in portal still i am facing the same issue.
For availability of system i replaced Administrator user id instead of SLDDSUSER.
Because of this problem portal users are facing issues frequently.
Please guide me ASAP .
Thanks & Regards
Kumar.

Hi,
Can you please confirm me is your system is refreshed with PRD data?
If yes,You need to change the users password accordinglly.
If not,Change the SLDDSUSER user password and change in SLD Data Supplier on both tabs HTTP Settings and CIM Client Generation Settings and check whether the CIMClient Test .
Also make sure this user id is used in any of the RFC destinations?If yes,Please change the new password.
If you still facing the issue you can use J2EE_ADMIN user instead of SLDDSUSER.
I hope it will help you.
Regards,
Kiran .V

SLD Data Supplier Collected information incomplete.

Dear All
My technical system is EP7.0 and SLD based on SOLMAN (EhP1).
I am getting error while trying to access SLD Data Supplier on
VA 'Server -> Services -> SLD Data Supplier'.
SLD_Collector_Task
2009.12.09@17:49:45: Data collection process started.
2009.12.09@17:49:45: Created list of data collecting classes.
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetDatabaseSystem
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetInstalledSoftwareComponent
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetJ2EEEngineCluster
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetJ2EEEngineInstance
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetJavaDebugPort
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetSAPBCCentralServiceInstance
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetSAPComputerSystem
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetSAPIPServicePort
2009.12.09@17:49:45: Processing class:
com.sap.sldserv.data.GetSAPJ2EEDeployedObject
2009.12.09@17:49:46: Processing class:
com.sap.sldserv.data.GetSAPJ2EEEngineClusterNode
2009.12.09@17:49:46: Collected information incomplete. Please check
trace file.
2009.12.09@17:49:46: Sending data via HTTP.
2009.12.09@17:49:47: Data has been sent successfully. You can check
correct data processing in the target SLD.
2009.12.09@17:49:47: Collecting process ended.
So I guess that full system data didnu2019t send to SLD therefor system
number and install number didnu2019t exist in SMSY.
Thanks & Best Regards.

I can't find message about SLD in default trace file.
But I found below messages in dev_jrfc.trc.
16.12.2009 15:30:50.384 ALL Error> occured >Wed Dec 16 14:10:16,880<
16.12.2009 15:30:50.384 ALL RfcException:
16.12.2009 15:30:50.384 ALL message: Parameter gateway service ('gwserv') needs to be of format #### or sapgw## (# is a di
git)
16.12.2009 15:30:50.384 ALL Connection parameters: TPNAME=SLD_NUC GWHOST=localhost GWSERV=sapgw
16.12.2009 15:30:50.384 ALL Return code: RFC_INVALID_PARAMETER(19)
16.12.2009 15:30:50.384 ALL error group: 101
16.12.2009 15:30:50.384 ALL key: RFC_ERROR_PROGRAM
16.12.2009 15:30:50.384 ALL at com.sap.mw.rfc.api.RfcRegisterInfo.checkParameters(RfcRegisterInfo.java:114)
16.12.2009 15:30:50.384 ALL at com.sap.mw.rfc.api.RfcApi.RfcAccept(RfcApi.java:651)
16.12.2009 15:30:50.384 ALL at com.sap.mw.jco.MiddlewareJRfc$Server.accept(MiddlewareJRfc.java:1563)
16.12.2009 15:30:50.384 ALL at com.sap.mw.jco.JCO$Server.accept(JCO.java:7989)
16.12.2009 15:30:50.384 ALL at com.sap.mw.jco.RequestListenerGroup.openConnection(RequestListenerGroup.java:531)
16.12.2009 15:30:50.384 ALL at com.sap.mw.jco.RequestListenerGroup.adjustConnectionCount(RequestListenerGroup.java:424)

SLD Data supplier Error

Hai Experts
Yesterday I got one error message from JDI configuration time. The Error was "Sld (http://otisap03:50200) server exception. User credential are invalid and user is denied access." Then now i open Visual administrator>services->SLD data supplier. I click the SLD DATA Supplier. Error in SLD DATA Supplier in
"Operation failed failed to collect data. Software caused connection abort:socket write error"
Can u help me!
Malar.

Hi Malar,
Apart from the link suggested by Barry please visit this link as well:
http://help.sap.com/saphelp_nw04/helpdata/en/c9/dc37520bdf4b48bb8f6d4329f073d5/frameset.htm
Further just check if te user id credentials you are inputting in SLD data supplier bridge configuration are valid. Check if the user id is not locked. Further check if the password is valid and finally if he has all SLD relevant authorizations.
If I rememeber you had posted a thread for a similar issue recently.
Please award points for useful info.
Regards.
Ruchit.
Message was edited by: Ruchit Khushu

SLD data supplier returning False

Dear All,
I am having a Scenario where I have to migrate the developments that are there in the DEV server to the PRD server. On doing a full export of the SLD Data contents to the PRD server the SLD Data Supplier is showing Flase and the Error that is showing is given below.
Can't store new target Error during write access to secure store (caused by: com.sap.security.core.server.securestorage.exception.ObjectStorageException)
Please advice me what can be wrong in this. I don't have a clue to make it TRUE. On clicking it TRUE it is returining FALSE.
Thanks in anticipation for the help. Please revert back ASAP.
Thanks and Best Regards
Chakra and Somnath

Hi Somnath,
Check the details of ObjectStorageException, you may get some idea:
<a href="https://media.sdn.sap.com/javadocs/NW04/SPS15/en/com/sap/security/core/server/securestorage/exception/ObjectStorageException.html">https://media.sdn.sap.com/javadocs/NW04/SPS15/en/com/sap/security/core/server/securestorage/exception/ObjectStorageException.html</a>
Regards,
Subhasha Ranjan

SLD data supplier - HTTP call failed

Hi All,
I am receiving the following error when navigating to 'Server -> Services -> SLD Data Supplier' within the Visual Administrator
SLD_Collector_Task
HTTP call failed: Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there
The target SLD is started. How do I check if the SLD bridge is started?
Does anyone has any advice on this error? Thanks.

Hi Lee,
You can check this using t-code RZ70
Also read the post installation guide for how to configure sld bridge where your sld is running.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/500519bb-75bd-2a10-c9b7-878798ae52bc
Regards
Ashok
Edited by: Ashok Dalai on Sep 25, 2008 8:09 AM

SAP CCMS Data Supplier

Similar Messages

Maybe you are looking for