SAP_CCMS_MONI_BATCH_DP getting cancelled with error in program SAPLSPFL

Hi Experts,
The job SAP_CCMS_MONI_BATCH_DP scheduled by user DDIC is getting cancelled everyday at 20:00 CET (system time).
The reason for the job getting cancelled with the runtime error Syntax error in program SAPLSPFL  and a short dump is generated.
Runtime Errors         SYNTAX_ERROR
Date and Time          07.03.2012 20:24:50
Short text
    Syntax error in program "SAPLSPFL ".
As per instructions I did syntax check for Program SAPLSPFL . It shows syntactical error as shown below.
The following syntax error occurred in program "SAPLSPFL " in include "LSPFLF07
" in
line 148:
"Bei PERFORM bzw. CALL FUNCTION "SET_DIRVALUE" ist der Aktualparameter "
""DIR_VALUES-DIR_ROLL" zum Formalparameter "DIR_VALUE" inkompatibel."
Please help me on this.

hi
check out this SAP Note
1000897  RZ10 profile import: Maximum path length is 60 characters

Similar Messages

  • Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION

    Dear Experts,
    Job DIM_OBSERVER is getting canceled with with a runtime error UNCAUGHT_EXCEPTION. Below are the details of runtime error.
    Category          
    ABAP Programming Error
    Runtime Errors    
    UNCAUGHT_EXCEPTION
    Except.           
    CX_UJA_ADMIN_ERROR
    ABAP Program      
    CL_UJA_MD_QUERY_OPT===========CP
    Application Component  EPM-BPC-NW-ADM
    Date and Time     
    02.08.2014 23:35:46
    I am unable to find related note and solution for the same. any help would be much appreciated.
    Thanks,
    Akbar.

    Hi Akbar,
    I believe this issue is coming up in BPC.
    But could you please provide some more detailed information like when exactly(after performing which step) is this error occurring?
    BR
    Prabhith

  • The report l runs very night and gets ended with error

    Dear all,
    I am facing a problem in solution manger. There is an report (Program/Command  RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
    Please suggest how to solve the problem.
    Is this report is necessary   for the system because it is not mention in the sap stand jobs.
    SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    SM:CSA SESSION REFRESH
    No. Program/Command       Prog. type Spool list Parameter      User  Lang.
    1  RDSMOPSOL_MONIREFRESH ABAP                  &0000000000876 BASIS EN
    Sm21 log
    00:00:50 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    00:30:57 BTC 08 200 BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... T    Transaction Problem
    Development class... SABP
    Further details for this message type
    Module name......... abdynpro
    Line................ 1133
    Error text.......... ab_jmess
    Documentation for system log message AB 0 :
    The specified runtime error has occurred in the system.
    Parameter
      a.. MESSAGE_TYPE_X
    Technical details
    File................ 000048
    Position............ 0000253620
    Entry type.......... l      ( Error (Module, Row)            )
    Message ID.......... AB 0
    Variable parts...... ab_jmess                                            abdynpro1133
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             AB1 > Short dump "081112 003057 sapsm BASIS " generated
    etails
    ecording at local and central time........................ 12.11.2008 00:30:57
    ask................ 05312 . 08 B8 BTC background processor No. 08
    ser................ BASIS
    lient.............. 200
    erminal............
    ession............. 1
    ransaction code....
    rogram name........
    roblem class....... K    SAP Web AS Problem
    evelopment class... SABP
    BAP Mini dump
    ate................ 20081112
    ime................ 003057
    ost................ sapsm
    ser................ BASIS
    ocumentation for system log message AB 1 :
    A short dump was generated for the specified program termination.
    You can analyze this short dump in the system log evaluation by
    selecting this line or evaluating Table SNAP (Transaction ST22).
    echnical details
    ile................ 000048
    osition............ 0000253800
    ntry type.......... s      ( ABAP Runtime Error             )
    essage ID.......... AB 1
    ariable parts...... 081112003057sapsm   BASIS
    Time     Ty. Nr Cl. User         Tcod MNo Text                                                                    Date : 12.11.08
    00:30:57 BTC 08 200 BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... K    SAP Web AS Problem
    Development class... SDYN
    Module name.........
    Location............
    T100................ 00                  671
    Parameters..........
    Documentation for system log message D0 1 :
    The transaction has been terminated.  This may be caused by a
    termination message from the application (MESSAGE Axxx) or by an
    error detected by the SAP System due to which it makes no sense to
    proceed with the transaction.  The actual reason for the termination
    is indicated by the T100 message and the parameters.
    Additional documentation for message 00                  671
    ABAP/4 processor: &
    No documentation exists for message 00671
    Parameter
      a.. MESSAGE_TYPE_X
    00:30:57 BTC 08 200 BASIS             R68 Perform rollback
    Details
    Recording at local and central time........................ 12.11.2008 00:30:57
    Task................ 05312 . 08 B8 BTC background processor No. 08
    User................ BASIS
    Client.............. 200
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... W    Warning
    Development class... STSK
    Further details for this message type
    Module name......... thxxhead
    Line................ 1240
    Error text..........
    Caller.............. ThIRoll
    Reason/called....... roll ba
    Documentation for system log message R6 8 :
    An error has causes an SAP rollback.  All database updates are reset.
    Technical details
    File................ 000048
    Position............ 0000254520
    Entry type.......... m      ( Error (Function,Module,Row)    )
    Message ID.......... R6 8
    Variable parts......                                       ThIRollroll bathxxhead1240
    Regards,
    Shiva

    Hi karteek,
    I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
    There is  one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH )  run   in your system or any one server because I have think there is some problem in job shued
    and is also not mention in the sap stand jobs.
    there is an error in sm21 in job.
    BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
    BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
    Is this SM37 log
    Job started
    Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
    Opening and closing session started. Session SM2000000000065
    Opening and closing the session was successful. Session: SM2000000000065
    Opening and closing session started. Session SM2000000000005
    ABAP/4 processor: MESSAGE_TYPE_X
    Job cancelled
    Sm21 log
    SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 003056 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
    BASIS             R68 Perform rollback
    BASIS             R49 Communication error, CPIC return code 017, SAP return code 223
    BASIS             R64 > CPI-C function: CMINIT(SAP)
    *BASIS        SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
    *BASIS        SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
    specified
    BASIS             R68 Perform rollback
    BASIS             AB0 Run-time error "MESSAGE_TYPE_X" occurred
    BASIS             AB1 > Short dump "081111 220948 sapsm BASIS " generated
    BASIS             D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
    Details Page 2 Line 6 System Log: Local Analysis of sapsm                     1
    Time     Ty. Nr Cl. User         Tcod MNo Text
    00:00:51 DIA 00 000 SAPSYS            EEA OPERATION MODES: Switch to operation mode Normal triggered
    Details
    Recording at local and central time........................ 13.11.2008 00:00:51
    Task................ 04100 . 00 D0 Dialog work process No. 00
    User................ SAPSYS
    Client.............. 000
    Terminal............
    Session............. 1
    Transaction code....
    Program name........
    Problem class....... S    Operation Trace
    Development class... SBTC
    Sm63
      Start/end time   Name of the active operation mode
       00.00 - 01.00    Normal
       01.00 - 02.00    Normal
       02.00 - 03.00    Normal
       03.00 - 04.00    Normal
       04.00 - 05.00    Normal
       05.00 - 06.00    Normal
       06.00 - 07.00    Normal
       07.00 - 08.00    Normal
       08.00 - 09.00    Normal
       09.00 - 10.00    Normal
       10.00 - 11.00    Normal
       11.00 - 12.00    Normal
       12.00 - 13.00    Normal
       13.00 - 14.00    Normal
       14.00 - 15.00    Normal
       15.00 - 16.00    Normal
       16.00 - 17.00    Normal
       17.00 - 18.00    Normal
       18.00 - 19.00    Normal
       19.00 - 20.00    Normal
       20.00 - 21.00    Normal
       21.00 - 22.00    Normal
       22.00 - 23.00    Normal
       23.00 - 00.00    Normal
    Regards,

  • Job SM:EXEC SERVICES  gets cancelled with  SYNTAX_ERROR

    Hi,
         The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
    Syntax error in program "RDSVASAEA_ROOT_____________050 ".
    I performed a syntax check on the program in the ABAP Editor and it gives the following result :
    Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
    specified tables nor defined by a "DATA" statement. "DATA" statement.
    Can you let me know, how to solve this problem.
    My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
    ST-SER and ST-ICO are with the latest support pkg level,
    Regards,
    Anil.

    These steps can be done easier as of Support Package Stack 15:
    >
    Amit Devale wrote:
    > Step 1:
    > Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
    > in the service definition tables
    >
    > Step 2:
    > Execute a 'Refresh service definitions' task session in transaction
    > SDCCN ->Task ->Create ->'Refresh service definitions'
    >
    > Step 3:
    > Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
    > _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
    Hi Amit,
    Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
    [SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
    This offers an easy way to update the service definitions and to generate the logfunc Includes.
    Step 0: Ensure that optimizer statistics exist for table D010INC.
    Step 1-3 :You can use functionality in SDCCN to execute these steps.
    Perform:
    - Path: SDCCN -> Utilities -> Maintain Service Definitions
    - Select 'Delete and Replace Service Definitions -> Confirm this selection
    - Confirm that you want to delete the definitions
    - Confirm that a new task 'Service Definition  Refresh' was created
      (Take a note of the task id -> Review the log for this task id when it is completed)
    You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
    Best regards,
    Ruediger
    P.S.: Great, that you start to share your rich experience here in SDN.

  • Background Job cancelling with error Data does not match the job definition

    Dear Team,
    Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
    Let me describe the problem clearly.
    We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
    And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
    Time     Message text                                                                       Message class Message no. Message type
    03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
    03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
    Please help me in resolving this issue.
    Thanks in advance,
    Sai.

    hi,
    If you have any GUI function modules used in the program of job
    you cannot run it in background mode.

  • My Itunes quit functioning so I removed it and when I tried to reload i keep getting a runtime error. Program: C:\ProgramFiles(x86)\itunes\itunes.exe. R6034. Any suggestions?

    My Itunes quit functioning so I removed it and when I tried to reload i keep getting a runtime error. Program: C:\ProgramFiles(x86)\itunes\itunes.exe. R6034. Any suggestions?

    You will have to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to correct.

  • ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING'

    Hi,
    I un-register below services to configure them with solaris SMF (I know oracle won't support SMF yet).
    they are running quite good, but only issue we are facing was RBAL create error logs in trace file.
    /u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.LISTENER.lsnr
    /u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.DATA.dg
    /u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.FRA.dg
    /u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.asm
    Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_rbal_14028.trc:
    ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
    KGGPNP_SIHA: resource 'ora.asm' is not available [200]
    KGGPNP_SIHA: attribute 'ASM_DISKSTRING' get failed sts[200] lsts[0]
    NOTE: failed to discover disks from gpnp profile asm diskstring
    ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
    WARNING::lib=/opt/oracle/extapi/64/asm err:9 rc:opendir location:skgdllOpenDi
    errbuf=2
    msgbuf=No such file or directory    other=Directory does not exist
    *** 2011-03-22 11:23:02.281
    kfgbRegister: registering group 1/0xB9966B09 (DATA)
    kfgbBind: binding kfgpn for group 1/0xB9966B09 (DATA)
    kfdp_query(DATA): 7 Edited by: Sachin B on Mar 28, 2011 3:17 AM

    Hi, it seems this errors comes from the fact that the asm wasn't registred in the cluster.
    so you have ti recreate the asm instance and register this instance in the cluster.
    srvctl add asm -p $ORACLE_HOME/dbs/init$+ASM.ora
    srvctl config asm
    i hope it could help !
    Huet Bruno
    Senior DBA Brinks France.

  • RDDGENOL job getting cancelled with huge number of ABAP dumps

    Hi,
    In our Production system, we had applied Kernel upto patch level 263 and while
    applying SPAM 30 for release 640 it failed. We tried applying Basis patch 15 still
    it did not went through.
    Since then we are getting around 1500-2500 dumps daily. The job RDDGENOLis getting cancelled and the dumps RAISE_EXCEPTION and SYNTAX_ERROR is displayed in ST22. Today, there were around 2500 dumps in the system.
    When I now run the Database <-> ABAP Dictionary consistency check in
    DB02, I see number of errors for missing objects in the database. There
    are around of dozens of Primary Indexes, secondary Indexes, Tables,
    Views listed in the result:
    Objects Missing in database No.
    =========================== ===
    Primary indexes 6
    Secondary indexes 14
    Tables 37
    Views 26
    When I try to create each of them using SE16 or using SQL utility on OS
    level, it gives an SQL system error. We are also getting thousands of
    dumps each day (attached alongwith this message). Also I see the CPF327E error
    in the OS Level Joblog.
    Also we cannot transport any requests. There is some problem with or
    due to the conversions. Is it a problem with Kernel, ABAP dictionary or
    database.
    Following is the extract of the dumps due to DDIC in 000:
    ============================================================
    Runtime Error          SYNTAX_ERROR
    Date and Time         
    ShrtText
    Syntax error in program "CL_WB_CROSSREFERENCE==========CP ".
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSEWB" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    In program "CL_WB_CROSSREFERENCE==========CP ", the following syntax error
    occurred
    in the Include "CL_WB_CROSSREFERENCE==========CM00D " in line 8:
    |    "The type "KEYWORD_TAB" is unknown." 
    ============================================================
    ============================================================
    Runtime Error          RAISE_EXCEPTION
    Date and Time         
    ShrtText
    Exception condition "DESTINATION_NOT_OPEN" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    Error analysis
    A RAISE statement in the program "SAPLCRFC" raised the exception
    condition "DESTINATION_NOT_OPEN".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    Specified destination is not open.
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "RAISE_EXCEPTION" C
    "SAPLCRFC" or "LCRFCU20"
    "RFC_CONNECTION_CLOSE"
    or
    "SAPLCRFC" "DESTINATION_NOT_OPEN"
    or
    "RADBAT01 " "DESTINATION_NOT_OPEN"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
    To obtain this, select in the current display "System->List->
    Save->Local File (unconverted)".
    2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    System environment
    SAP Release.............. "640"
    Application server....... "TXTPDSAP"
    Network address.......... "172.16.0.140"
    Operating system......... "OS400"
    Release.................. "5.3"
    Hardware type............ "0065000655EC"
    Character length......... 8 Bits
    Pointer length........... 64 Bits
    Work process number...... 35
    Short dump setting....... "full"
    Database server.......... "TXTPDSAP"
    Database type............ "DB400"
    Database name............ "TXT"
    Database owner........... "R3TXTDATA"
    Character set............ "en_US.ISO8859-1"
    SAP kernel............... "640"
    Created on............... "Dec 11 2008 23:06:45"
    Created in............... "AIX 1 5 00538A4A4C00 (IBM iSeries with OS400)"
    Database version......... "DB4_52"
    Patch level.............. "263"
    Patch text............... " "
    Supported environment....
    Database................. "V5R2, V5R3, V5R4, V6R1"
    SAP database version..... "640"
    Operating system......... "OS400 2 5, OS400 3 5, OS400 4 5, OS400 1 6"
    Memory usage.............
    Roll..................... 696832
    EM....................... 16759712
    Heap..................... 0
    Page..................... 32768
    MM Used.................. 1383120
    MM Free.................. 3483600
    SAP Release.............. "640"
    User and Transaction
    Client.............. 000
    User................ "DDIC"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLCRFC"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where terminated
    The termination occurred in the ABAP program "SAPLCRFC" in
    "RFC_CONNECTION_CLOSE".
    The main program was "RADBAT01 ".
    The termination occurred in line 22 of the source code of the (Include)
    program "LCRFCU20"
    of the source code of program "LCRFCU20" (when calling the editor 220).
    The program "SAPLCRFC" was started as a background job.
    Job name........ "RDDGEN0L"
    Job initiator... "DDIC"
    |    Job number...... 00032101    
    ============================================================
    Kindly let me know the immediate fix. Thanks!
    Regards,
    Nick

    Hi Nick,
    I would say, you are having a slight missperception of this forum ... it should not replace your basis ressources in your company.
    What you are doing is pretty complex (and the mixtrure of SPAM Update AND Basis SP seems to be wrong to me) and therefore, it will not be possible, to help you, just based on such a short dump.
    Sorry,
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • Job getting cancelled with Tbale_illegal_statement dump

    hello,
    Hi Experts,
    i have a background job scheduled for a standard transaction SARA .it is getting cancelled and giving the following error:
    "TABLE_ILLEGAL_STATEMENT"
    Information on where terminated
    The termination occurred in the ABAP program "SAPLCKMLLAARCH" in
    "CKMLLA_INIT_READ".
    The main program was "RKSARCDL ".
    The termination occurred in line 253 of the source code of the (Include)
    program "LCKMLLAARCHF01"
    of the source code of program "LCKMLLAARCHF01" (when calling the editor 2530).
    The program "SAPLCKMLLAARCH" was started as a background job.
    The line it is giving Dump Is >       INSERT handle_tab.
    I have tried to debug the transaction but the execution is not ata all going to the program
    SAPLCKMLLAARCH where it is giving dump.Propably because that program is running in Background.
    So please let me know how I can fix this issue..Please

    Hi Prashanth,
    Were you able to resolve the issue ? Because, i am also facing the same problem, when I am triggering the Delete step for CO_CCMAST archiving object.
    Regards,
    Shail.

  • Online backup getting failed with error BR0278E - Invalid Argument

    Hi All,
    Online backup in Production system is getting failed when taken using DB13.  Last week the SAP Production Server was migrated to SAN and it was up & running fine.
    SAP System - ECC 6
    OS                - AIX 5.3
    Database      - Oracle 10g
    Even the Archive log backup has been successful, but Online backup is failing.  Following is the error log:
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0057I Backup of database: RTP
    BR0058I BRBACKUP action ID: bebkzprw
    BR0059I BRBACKUP function ID: ant
    BR0110I Backup mode: ALL
    BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
    BR0061I 41 files found for backup, total size 97416.297 MB
    BR0143I Backup type: online
    BR0112I Files will not be compressed
    BR0130I Backup device type: tape
    BR0102I Following backup device will be used: /dev/rmt3.1
    BR0103I Following backup volume will be used: RTPB01
    BR0289I BRARCHIVE will be started at the end of processing
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
    BR0355I from /dev/rmt3.1 ...
    BR0241I Checking label on volume in device /dev/rmt3.1
    BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
    BR0203I to /dev/rmt3.1 ...
    We have checked using different tapes, restarted SAP, etc but could not resolve it.
    Please suggest further.
    Thanks
    Vamsi

    Hi Vamsi
    Please go through below link
    Re: onLine backup fails with error BR0278E
    There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
    Let us know if this information was useful to you.
    with regards,
    Parin Hariyani

  • Kp26 getting run time error  in program "COCC2009 "

    Dear all
    Im getting run time error massage once the KP26 running . "The data object "ITDAT1" has no component called "TXTUPL", but there is a component called "TXTUP".
    The following syntax error occurred in program "COCC2009 " in include "RKCCAI02
    We are working on upgraded system. please hep me to solve this issue.
    Regard,
    nawa

    Hi
    I am using ECC 6.0 and when I checked the field mentioned TXTUPL, it is available there.
    Can you check the COCC2009 program whether the field is there or not.
    Shiva

  • Migration Request getting failed with error code 152

    Hi Experts,
    We are creating a migration request for moving a transport along the path Development-Quality-Production ( tcode                        /POWERCOR/MRCRE ). But the import into Quality is getting failed with return code 152 and status code E. While the transports without creating the migration request are normal. Please let us know how we can resolve this issue.
    Thanks in advance.
    Regards,
    Surendra Julury,
    +91 9611107275

    Try running the exe remotely on a computer using PSExec under the system context. What happens?
    See here for PSExec - you need the -s switch for local system
    http://technet.microsoft.com/en-ie/sysinternals/bb897553.aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    If you do this then you will know. This mimics the behaviour of the ConfigMgr deployment. Use the same .exe -silent etc.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • My computer uses Windows XP.  The latest Apple Update for iTunes ruined everything.  It won't load the software, and I'm getting flooded with error messages.  Is this latest update a bunch of crap?

    My computers uses WindowsXP.  The latest Apple Software Update put the latest version of iTunes on my computer, and now iTunes doesn't work.  I've tried that instructions on the Apple homepage (delete program, reinstall, etc.), and nothing works.  What's worse is that I'm getting error messages every time I log on to my computer.  Is this latest version a pile of pooh?  Anybody know how to fix this?  Or do I need to wait for Apple to figure out where they screwed up?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Some SAP Jobs cancel with error TSV_TNEW_PAGE_ALLOC_FAILS

    Some of background jobs started cancelling since 10 days ago.
    Here are info from ABAP Dump:
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 6221248
    Extended memory (EM)........... 50278176
    Assigned memory (HEAP)......... 799483568
    Short area..................... " "
    Paging area.................... 24576
    Maximum address space.......... 18446744063552822256
    Below are my current setting:
    Roll, extended and heap memory EXTM
    ztta/roll_area        6500000    Byte
    ztta/roll_first       1000000    Byte
    ztta/short_area       3200000    Byte
    rdisp/ROLL_SHM        16384      8 kB
    rdisp/PG_SHM          8192       8 kB
    rdisp/PG_LOCAL        150        8 kB
    em/initial_size_MB    2048       MB
    em/blocksize_KB       4096       kB
    em/address_space_MB   4092       MB
    ztta/roll_extension   50000000   Byte
    abap/heap_area_dia    1800000000 Byte
    abap/heap_area_nondia 800000000  Byte
    abap/heap_area_total  1000000000 Byte
    abap/heaplimit        20000000   Byte
    abap/use_paging       0
    Here are more info
    ECC6 SPS13
    Oracle 10.2.0.2
    Solaris 5.9
    Can some please let me know what will be correct parameter setting?
    I have played with them a little bit, but still I am getting the error.
    Regards,
    Ray

    Hi,
    Please check the link this may resolve your issue.
    Re: dump TSV_TNEW_PAGE_ALLOC_FAILED
    Regards
    K.R

  • Gns is getting failed with error CRS-2632  during RAC installation

    hello guys i am new to oracle RAC and i am trying to configure two node ORACLE 11G R2 RAC setup on OEL 5.4 using GNS Every things works great till I execute
    root.sh script on the first node
    It gives me error
    CRS-2674: Start of 'ora.gns' on 'host01' failed
    CRS-2632: There are no more servers to try to place resource 'ora.gns' on that would satisfy its placement policy
    start gns ... failed
    Preparing packages for installation...
    cvuqdisk-1.0.7-1
    Configure Oracle Grid Infrastructure for a Cluster ... failed
    Updating inventory properties for clusterware
    Starting Oracle Universal Installer...
    When i check status of cluster recourse i get this as output
    [root@host01 ~]# crs_stat -t
    Name           Type           Target      State Host
    ora.DATA.dg           ora....up.type      ONLINE ONLINE host01
    ora....N1.lsnr           ora....er.type      OFFLINE OFFLINE
    ora....N2.lsnr           ora....er.type      OFFLINE OFFLINE
    ora....N3.lsnr           ora....er.type      OFFLINE OFFLINE
    ora.asm           ora.asm.type      ONLINE ONLINE host01
    ora.eons           ora.eons.type      ONLINE ONLINE host01
    ora.gns           ora.gns.type      ONLINE OFFLINE
    ora.gns.vip           ora....ip.type      ONLINE OFFLINE
    ora.gsd           ora.gsd.type      OFFLINE OFFLINE
    ora....SM1.asm           application          ONLINE ONLINE host01
    ora.host01.gsd           application      OFFLINE OFFLINE
    ora.host01.ons           application      ONLINE ONLINE host01
    ora.host01.vip           ora....t1.type      ONLINE ONLINE host01
    ora....network           ora....rk.type      ONLINE ONLINE host01
    ora.oc4j           ora.oc4j.type      OFFLINE OFFLINE
    ora.ons           ora.ons.type      ONLINE ONLINE host01
    ora....ry.acfs           ora....fs.type      OFFLINE OFFLINE
    ora.scan1.vip           ora....ip.type      OFFLINE OFFLINE
    ora.scan2.vip           ora....ip.type      OFFLINE OFFLINE
    ora.scan3.vip           ora....ip.type      OFFLINE OFFLINE
    These are my GNS configuration file entries
    vi /var/named/chroot/etc/named.conf
    options {
         listen-on port 53 { 192.9.201.59; };
         listen-on-v6 port 53 { ::1; };
         directory      "/var/named";
         dump-file      "/var/named/data/cache_dump.db";
    statistics-file "/var/named/data/named_stats.txt";
    memstatistics-file "/var/named/data/named_mem_stats.txt";
         allow-query { any; };
         allow-query-cache { any; };
    zone "." IN {
         type hint;
         file "named.ca";
    zone "localdomain" IN {
         type master;
         file "localdomain.zone";
         allow-update { none; };
    zone "localhost" IN {
         type master;
         file "localhost.zone";
         allow-update { none; };
    zone "0.0.127.in-addr.arpa" IN {
         type master;
         file "named.local";
         allow-update { none; };
    zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
    type master;
         file "named.ip6.local";
         allow-update { none; };
    zone "255.in-addr.arpa" IN {
         type master;
         file "named.broadcast";
         allow-update { none; };
    zone "0.in-addr.arpa" IN {
         type master;
         file "named.zero";
         allow-update { none; };
    zone "example.com" IN {
    type master;
    file "forward.zone";
         allow-transfer { 192.9.201.180; };
    zone "201.9.192.in-addr.arpa" IN {
    type master;
    file "reverse.zone";
    zone "0.0.10.in-addr.arpa" IN {
    type master;
    file "reverse1.zone";
    vi /var/named/chroot/var/named/forward.zone
    $TTL     86400
    @          IN SOA     server1.example.com. root.server1.example.com. (
                             42          ; serial (d. adams)
                             3H          ; refresh
                             15M          ; retry
                             1W          ; expiry
                             1D )          ; minimum
         IN NS          server1
              IN A          192.9.201.59
    server1          IN A          192.9.201.59
    host01          IN A          192.9.201.181
    host02          IN A          192.9.201.182
    host03          IN A          192.9.201.183
    openfiler     IN A          192.9.201.184
    host01-priv     IN A          10.0.0.2
    host02-priv     IN A          10.0.0.3
    host03-priv     IN A          10.0.0.4
    vi /var/named/chroot/var/named/reverse.zone
    $ORIGIN cluster01.example.com.
    @     IN     NS     cluster01-gns.cluster01.example.com.
    cluster01-gns     IN     A     192.9.201.180
    $TTL     86400
    @ IN SOA server1.example.com. root.server1.example.com. (
    1997022700 ; Serial
    28800 ; Refresh
    14400 ; Retry
    3600000 ; Expire
    86400 ) ; Minimum
    IN NS server1.example.com.
    59 IN PTR server1.example.com.
    184 IN PTR openfiler.example.com.
    181 IN PTR host01.example.com.
    182 IN PTR host02.example.com.
    183 IN PTR host03.example.com.
    vi /var/named/chroot/var/named/reverse1.zone
    $TTL     86400
    @ IN SOA server1.example.com. root.server1.example.com. (
    1997022700 ; Serial
    28800 ; Refresh
    14400 ; Retry
    3600000 ; Expire
    86400 ) ; Minimum
    IN NS server1.example.com.
    2 IN PTR host01-priv.example.com.
    3 IN PTR host02-priv.example.com.
    4 IN PTR host03-priv.example.com.
    Please suggest me what i am doing wrong
    Edited by: 1001408 on Apr 21, 2013 9:17 AM
    Edited by: 1001408 on Apr 21, 2013 9:22 AM

    Hello guys finally i find mistake i was doing
    while configuring Public Ip for the nodes i was not giving Default Gateway .I was assuming as all these machine is in same network with same Ip range so they would not be needing Gateway but here my assumption mismatch with oracle well finally happy to see 11G r2 with GNS running on my personal laptop.
    cheers
    Rahul

Maybe you are looking for