SAP-Ceritification Material-ECC-5.0

Dear All,
I wish to do the certification for FI / CO module - ECC 5.0 version.
If any of you are having the documentation, Please forwad
my email id is [email protected]
Regards
Anilkumar

Hi,
Can anyone send SAP FI ecc 6.0 certification material/ pdf files to my mail id:
[email protected]
regards,

Similar Messages

Differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod

Dear Friends,
Please mail to me the differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material Material management module.
With regards

Hi Vasmi
There is lot of Diffenence Between ECC 6.0 & 4.6 C
1-in 4.6 C Country India Version(CIN) is add on Separatelly
while after 4.7 E up to ECC 6.0 CIN is integrated Part of SAP. that is the measure difference as per my knowledge
2-ECC 6.0 have more functionality in terms of transaction for example
if you do MIGO for PO then you can capture and post the excise invoice in the same transaction while in case of 4.6 C that feature is not available
these two are major as far as MM is concern
there are many others feature also
Thanks

ECC 6 - SAP Certification Material - Controlling

hi
If anybody has SAP Certification material for Controlling for ECC 6. Kindly send to the E-mail Id - [email protected]

Hello
SAP Certification material is very tough to get.
People spend hundreds of thousands for certification and it is a height to expect the prized material.
However, there could be people who are willing to part with the material. In case, you get it, place it in the forum, so that everyone else can down load it.
Reg

Siggestion needed : SAP Certification Program ECC 5.0 versions

hi could you please suggest where i could get good study material for this certification.
SAP Certification Program ECC 5.0 versions
thanks in advance,
Naval Bhatt

Hi,
I have answered this query in detail, please view the below link. Have also provided the link to download the required material for WAS 640 certification.
WAS Certification
rewards points if helpful.
Awaiz.

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640

We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640.
We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release the web service definition from WSCONFIG, we get an error saying:
"Error when creating web service(Web Service Definition Z_WSD_CUSTOMER_BAPI for SOAP application unbekannt)"
Please help...
Thanks,
Shailesh

Hi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs      TYPE bukrs,
        l_belnr      TYPE belnr_d,
        l_gjahr      TYPE gjahr,
        lr_belnr     TYPE RANGE OF belnr_d,
        lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
    FROM zpi_test
    WHERE bukrs EQ l_bukrs
      AND belnr IN lr_belnr
      AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
    l_belnr = '4700000000'.
ELSE.
    l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.

How to Integrate SAP R/3 ECC 6.0 with XI3.0 or PI7.0

Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
Viswanath

Hi,
It will be possible to do all the configurations related to RFC destination and partner profile as the experties have mentioned in above posts.
You need to also check with the way you could be able to access the SAP R/3 ECC 6.0 server through internet.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
·        Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
·        Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
·        Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
·        HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
·        No Logon: The server program does not request a user or password.
·        Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
·        SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
Thanks
Swarup

How to bring BO knowledge (Oracle source) to SAP BI/BW/ECC (source)

Hi,
I currently took a BO XI R2 class but they did not have SAP BI/BW (ECC 6/ R3) and therefore, they used only Oracle DB as the relational database i.e. the source system of data.
Do you have any help for me on how to transition my acquired knowledge into the SAP environment?
I am an SAP BW/BI consultant.
i.e.
Any info on how link BO to SAP BI Cubes/DSO since class did not discuss those?
For example, I saw a requirement, "BO experience with atleast one implementation in ECC6.0" .
I will appreciate any hints to help be bring the two together i.e. BO knowledge (Oracle source) to SAP BI/BW/ECC (source)
Thanks

wrong location

What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?

Hi Team,
Hope you are doing well, Can you please explain the below points.
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thanks in advance.

Hi Deepak,
We are not partner/ customer with SAP, so don't have access to tools.
Can you please give theoretical idea about
1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP) vs ECC 6.7 (EhP 7)?
2)     What is the split of SAPS between Core and RAM?
Thank you,
Gopi Reddy

Euro exchange rate in sap 6.00 ecc version

dear all,
We are recently implementing sap in our company.we are following sap 6.00 ecc version. we have taken E.rate types B for selling , G for buying , M for average.
But for EURO it is asking for type EURX only.but I want to define buying and selling rates for EURO also.can anybody tell how to define buying and selling for EURO also.

Hi,
nevertheless you will always do the postings in M. If you want to post to use G or B you have to put in the rate type manually. That means you can maintain the KNVV-KURST manually with another course type.
to your problem. It is also possible to use the EURX. And in special cases like KNVV-KURST you can choose the exchange rate G or B manually. The document in this case will be posted later with G or B. KNVV is only an example
Please check. But it should work.
Best regards
Volker

Options for loading data from legacy mainframe to SAP CRM and ECC

Hello All,
I am new to SAP.
As part of data conversion planning from legacy mainframe to SAP CRM and ECC systems, I need to know the different tools available for loading the data and comparative analysis of the tools by showing the features. Please also describe the process to evaluate the tools (prototyping, technical discussions etc) and make the recommendations.
I would also appreciate any information on testing tools like (eCATT) and any third party tools (like Informatica)
I know I am asking for lot of things here. But, I really appreciate any information reagrding this.
Thanks,
Balu

Hi
Data Migration(Conversions) mainly involves the following Major Steps
Discovery->Extract->Cleanse->Transform->Load
Discovery-> Involves identifying various source systems available where the actual data is residing.
Extract->Extract the data from the source systems(legacy systems)
Cleanse->Cleanse the data by enriching it,De-duplications etc
Transform->Transform the data into SAP Loadable format
Load->Upload the data into SAP Using the Load Programs(Eg,BDC,LSMW,Data Transfer Workbench,BAPIs etc)
Also i would request you to visit http://www.businessobjects.com/solutions/im/data_migration.asp
Cheers,
Hakim

Download SAP GRC for ECC 6.0

How can I download SAP GRC for ECC 6.0?

GRC applications comprise Access Control, Process Control, Global Trade Service, Environmental Compliance, Environment Health & Service, Risk Management, etc.
The software license for these applications scales with the licensing organization's revenue or an equivalent metric.
You'll obtain a quotation from your account manager.

SAP HCM in ECC 6.0

Hello Gurus,
We are having 4.7 system where HR,Finance is running.Our Client needs the functionlity of ECC 6.0 for HCM module.Currently there are interested to implement ECC where they will be using only HR module & the finace will be there in the existing 4.7 system.Will it be possible to use SAP HCM in ECC with Finance in 4.7 system??If it works how to do that?Is it through SAP PI?

Hi,
The best solution would have been to upgrade the 4.7 system to ECC6 and to use Finance and HCM in the same system.
R/3 4.7 will soon be obsolete... So the ECC6 upgrade will anyway be needed soon.
If you absolutely need 2 systems , yes you can connect ECC6 HCM to R/3 4.7 through ALE/idocs. It is especially needed if you will do the payroll on the HCM system.
Regards,
Olivier

SAP SD certification ECC 6.0 marking scheme

Hi,
I am planning to sit for the SAP SD certification ECC 6.0.
Could you please advise whether part marks will be given for questions,
ex: If in a question we are asked to mark all the answers which are correct, of which there are 3 correct answers. we have marked 2 of those as correct, are we given any marks?
Also is the passing mark 70%?
Thanks,
Keshi

I think the current pattern of the exam has changed. I passed all my certification under old valution method.
Now no partial credit will be given. SAP will tell you in advance how many correct answers are there.
Means, you need to identify the right answers. The pass percentage is 55%
Regards,
Ravi

SAP-Ceritification Material-ECC-5.0

Similar Messages

Maybe you are looking for