SAP Certification for ABAP System Interfaces with SAP NetWeaver

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver 7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator> at yahoo dot co in
Points Assured.
Regards
Praneeth
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Oct 14, 2008 1:25 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

Similar Messages

SAP Certification for *ABAP System Interfaces with SAP NetWeaver    7.0*

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver    7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator>
Points Assured.
Regards
Praneeth
Edited by: Jan Stallkamp on Oct 13, 2008 3:30 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

Hi,
I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
Thanks,
Poonam.

Dear Poonam,
the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
Here's how to book your exam:
Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
Schedule the exam according to the rules of your region - here is the link for the US:
[http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
Regards,
Klaus

SAP Certfied Dev Professional - ABAP System Interfaces with SAP Netweaver 7

Hi all,
Has any one here done this certification ?
SAP Certfied Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0
Code - P_ABAP_SI_70
If yes, how has been the value add for you post this certification ?
Regards,
Nikhil.

Hi Nikhil,
I have not appeared for it but am sure that SAP's professional certification has very much value in the market. The professional level exam not only captures your knowledge but it shows the practical experience as well.
Regards,
Subhash

SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

Hello Experts
I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
Regards
Atush Rohan
Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

hi,
actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority... now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ... also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will schedule the date..... yes they can do that.
hope this will surely help you!!!
thanks & regards,
Punit Raval.

TAS(Terminal Automation System) interface with SAP

Hi All,
kindly suggest procedure to establish the interface between the TAS(terminal Automation System) and SAP in SAP SD delivery processing.
i am furnishing details below
terminal Automation System is third party software(legacy) which is used in loading of Hydrocarbons in Truck Tanker,it will capture the details like
material
product code
product quantity
we require the loaded quantity which is loaded into Truck tanker using the TAS(terminal Automation System) as picked quantity in SAP SD delivery process automatically.
thanks in Advance

Hi Sathya,
Once, we had a similar requirement.
To get attendance system records into SAP only for reporting purposes, we defined a Z-table.
Then we transferred the data from the attendance system database table into respective SAP Z-table via some RFC calls (we tied these RFCs to job so that they were executed every day).
Then we made the reporting on this Z-table accordingly.
Nothing in time management infotypes changed.
Regards,
Dilek

How SAP Risk Management may be interfaced with SAP Strategy Management?

Hello,
Any document, any customer experience around integration between SAP BusinessObjects Strategy Management and SAP BusinessObjects Risk Management would be very appreciated.
Best regards
Jean-Luc

Hi Renaud,
where you able to create your webservice and use it from GRC RM?
If yes, I would be interested in - 'How do i connect SAP RM 3.0 with that web service'
Regards
Holger

How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

Dcs interface with sap pm

Dear experts,
can anyone explain me the basic steps and information regarding dcs interface with sap .
i want to do this sap implementation for the thermal power station. i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
how the important parameters from the dcs is linked with sap server. how i can get the data from dcs and pass it to the sap system.
can anyone give the helping hand.

Hi,
You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
Thanks
Swarup

SAP Webdynpro for ABAP - IXOS Integration for storing documents

Hi
We have a requirement to attach documents to a web based SAP custom application and store as attachments simialr to GOS fucntionality in SAPGUI. SAP web based application is developed using web dynpro for ABAP. Atatched documents are to be stored externally in IXOS system. I am looking for fucntion modules or BAPI's that integrate SAP webdynpro for ABAP and IXOS. Requirement is below
1)     From SAP Webdynpro for ABAP application read a file form desktop and store on external IXOS system.
2)     Retrieve a file from IXOS system and display in SAP Web Dynpro for ABAP application
3)     Delete a file on IXOS system from Web Dynpro for ABAP application
Thank You

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

Third Party Systems Integration with SAP Business One

Different techniques are available in SAP Business One for Integration such as DI API, DI Server, B1WS, etc. In this blog article we tried to describe the architecture and details of different techniques through which ‘Third Party Systems Integration with SAP Business One’ usually happens
Third Party Systems Integration with SAP B1 - APPSeCONNECT

Hi,
Thanks for sharing such excellent blog with advantage and limitations.
Thanks & Regards,
Nagarajan

I need to made an application for web in php with sap bo.

I need to made an application for web in php with sap bo, it's this possible??, what do I need to have for to made it?.
It's possible to made an application for only sales quotation and to show price list without SDK for BO??... only access on the tables in only read???... without transactions.
thks for all answers.
Atte.

Your question is kind of no easy answer. If you just need read only access to B1 DB, it should not have any problems for SAP support. However, I believe it is not easy to link to B1 dynamically from PHP without affecting system performance. In test environment, you could try to do anything to make sure you may achieve both without affecting DB performance.
Thanks,
Gordon

SAP Certification for ABAP System Interfaces with SAP NetWeaver

Similar Messages

Maybe you are looking for