SAP Client numbering system

Hi, can anyone please point me to a link that can tell me SAP best practices server and client numbering systems. Like prod server is 01 and client is 100 and QA and DEV has what numbers and how SAP recommends it. thanks

Hi venkat
There is nothing special Numbering system which SAP recomands , While basis people installation they will cross verify with the existing client numbers with in the organisation and what ever previously not given it will be assigned respectively .
It is not mandatory how u mentioned 100 , 200 and 300 for Prod , dev and Qa , what ever i have worked with the clients i worked as 700 for Prod , 100 dev , 300 qa respectively this for your information only it can be change any time .
Regards
Satish

Similar Messages

How to check the OSS note in SAP Client system ?

Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun

Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini

IDES and other Clients in one SAP ERP 2005 System

Hello everybody,
within a project for my master thesis i have to set up an SAP ERP 2005 System. This system should contain at least three clients. One of them should be the IDES client. Another client should be set up with an existing template. The third client should represent a smal company or at least i should set up some example process from the company (there is no need to map the whole company in the system). These processes should be realized with the SAP standard processes and they should just show how to map easy processes to SAP ERP. Neither the second nor the third client need to run in a productive environment, everything is just for training and testing.
My main Questions are:
I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Can I implement the second and third client in the same ERP System (where the IDES client is) or do i need different Systems for it? Even if there is no productive use for the clients we would like to have a Development and a Quality Landscape. Is this possible with the IDES client? Actually I have two fast machines for this purpose - one for quality and one for development.
I would be very grateful for any hints.
Thanks a lot.
Regards,
Martin

Hi,
You can use SAP IDES as Dev and Quailty.There is no diffrence in full sap or IDES .In IDES we have some pree configure Clients and full Ecc we have three client 000,001 and 066.
So you can use SAP IDES as DEV.
Your Question :I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Ans : you install diffrent mechine.We do't use any content.Do reinstall
Thanks
Pankaj Kalsayan

Portal application connecting backend SAP R/3 system

Hi All,
 I am developing one portal application through NWDS. It's JSPDYNPage component.The applications functionality is basicaly is to connect it to backend SAP R/3 system & fetch some data in aparticular table & display that data in a tableview format on one JSP& also when i click any row of the tableview then details of that row should get displayed on the next JSP. So i reached till develpoing a code that connnects to Backend SAP R/3.(Basicaly coding of connection part is done). Now i need to test this code, to check whether it is fine or not? NWDS doesnt give nay error, not compile also or not runtime error also. It simply shows the output as a blank page, where it is supposed to display one line of text in textview(i coded this in my JSP).But as i said it displays a blank page. i tried to debug the application , but debugging also not worked.I performed the debugging twice in right way. The code was not debugged, it run the same way as it normally runs when debugging is off & shown the blank page. I also have done all the the settings or prerequisites for debugging properly. I am stuck at this point now.search many documents , but no relevant help has been received. Can anyonehlep me with this. i am putting below the code for JSP, JSPDYNPAGE component as well as portalapp.xml. Can anyone guide me with this, whhere i am making mistake? what should i change in this?
JSPDYNPAGE code
package com.lti.portal;
//import java.util.ArrayList;
import com.sapportals.htmlb.*;
import com.sapportals.htmlb.enum.*;
import com.sapportals.htmlb.event.*;
import com.sapportals.htmlb.page.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import java.util.ArrayList;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.JCO;
import com.sun.corba.se.internal.core.Response;
public class Connection_R3 extends PageProcessorComponent {
public DynPage getPage(){
return new Connection_R3DynPage();
public static class Connection_R3DynPage extends JSPDynPage{
private Conn_R3 myBean = null;
public JCO.Client mConnection;
public JCO.Repository mRepository;
public ArrayList al = new ArrayList();
public String output;
public String Ans;
public static String BEAN_KEY="myBean";
public void doInitialization(){
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
//create & initialize the bean.
Conn_R3 test_bean= new Conn_R3();
test_bean.setans("3");
// put the bean into application context.
context.putValue(BEAN_KEY,test_bean);
conn();
//IPortalComponentResponse res = (IPortalComponentResponse)this.getResponse();
//for(int i=0;i<al.size();i++)
//res.write(" "+al.get(i).toString());
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Connection_R3.jsp");
public ArrayList conn() {
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
Conn_R3 sample_bean = new Conn_R3();
sample_bean.setans("5");
//context.putValue(BEAN_KEY, sample_bean);
//r3-accessing
//connect_to_r3();
try {
// Change the logon information to your own system/user
mConnection = JCO.createClient("800", // SAP client
"********", // userid
"******", // password
null, // language
"*******", // application server host name
"**"); // system number
mConnection.connect();
//System.out.println(mConnection.getAttributes());
mRepository = new JCO.Repository("ABC", mConnection);
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("ZSAMPLE");
if (function == null) {
System.out.println("ZSAMPLE" + " not found in SAP.");
System.exit(1);
String num1 = "7";
String num2 = "9";
//String ans;
function.getImportParameterList().setValue(num1,"My_import");
function.getImportParameterList().setValue(num2, "My_Import");
mConnection.execute(function);
Object name =function.getExportParameterList().getValue(Ans);
output=name.toString();
sample_bean.setans(output);
//sample_bean.setans(output)
//al.add(name);
//store values into strings
//pushing of values we get from r3 into awt
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
disconnect_r3();
return al;
public void connect_to_r3() {
public JCO.Function createFunction(String name) throws Exception {
try {
IFunctionTemplate ft =
mRepository.getFunctionTemplate(name.toUpperCase());
if (ft == null)
return null;
return ft.getFunction();
} catch (Exception ex) {
throw new Exception("Problem retrieving JCO.Function object.");
public void disconnect_r3() {
mConnection.disconnect();
//**********************Code for BEAN****************************
package com.lti.portal;
import java.io.Serializable;
public class Conn_R3 implements Serializable {
public String answer;
public void setans(String a)
answer=a;
public String getans()
return answer;
///////////////////////Code for JSP*****************************
><%@ taglib uri= "tagLib" prefix= "hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.lti.portal.Conn_R3" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<hbj:textView
id="Welcome_message"
text="<%=myBean.getans()%>"
design="STANDARD" >
</hbj:textView>
</hbj:form>
</hbj:page>
</hbj:content>
/////////////////////////////////Portalapp.xml*****************************************
application>
<application-config>
 <property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
 <component name="Address_comp">
 <component-config>
 <property name="ClassName" value="com.lti.portal.Address_comp"/>
 </component-config>
 <component-profile>
 <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
 </component-profile>
 </component>
</components>
<services/>
</application>

Hi,
 Do onething, please refer this <a href="http://www.i-barile.it/SDN/JCoTutorial.pdf">JCo Tutorial</a> as well as <a href="http://www.apentia-forum.de/viewtopic.php?t=1962&sid=9ac1506bdb153c14edaf891300bfde25">Link</a> also.
Regards,
Venkatesh. K
/* Points are Welcome */

Help on accessing table available in SAP R/3 System

Hi All
A day before I had posted a question regarding the accessing of tables available in SAP R/3 system.
I got the following code as reply. This code is working fine.
But in the below example, the QUERY_TABLE IS BSAUTHORS.
In my case, the QUERY_TABLE is VBKD(Sales Document Table).
When I replace the table name with VBKD in place of BSAUTHORS, I am getting the following error:
ERROR BEGIN----
com.sap.mw.jco.JCO$AbapException: (126) DATA_BUFFER_EXCEEDED: Selected fields do not fit into structure DATA
     at com.sap.mw.jco.JCO$Function.getException(JCO.java:17978)
     at com.sap.mw.jco.JCO$Client.execute(JCO.java:3143)
     at com.insync.JCO.UpdateSalesOrder.main(UpdateSalesOrder.java:34)
ERROR END----
Can anyone please give me a solution for this?
Thanks in Advace,
Vijay.
**********************Code**********************
import com.sap.mw.jco.*;
public class JcoTest {
private static JCO.Client theConnection;
private static IRepository theRepository;
public static void main(String[] args) {
createConnection();
retrieveRepository();
try {
JCO.Function function = getFunction("RFC_READ_TABLE");
JCO.ParameterList listParams = function.getImportParameterList();
listParams.setValue("BSAUTHORS", "QUERY_TABLE");
//listParams.setValue("VBKD", "QUERY_TABLE"); // ERROR
theConnection.execute(function);
JCO.Table tableList = function.getTableParameterList().getTable("DATA");
if (tableList.getNumRows() > 0) {
   do {
    for (JCO.FieldIterator fI = tableList.fields();
      fI.hasMoreElements();)
      JCO.Field tabField = fI.nextField();
      System.out.println(tabField.getName()
           + ":t" +
           tabField.getString());
     System.out.println("n");
   while (tableList.nextRow() == true);
catch (Exception ex) {
   ex.printStackTrace();

I am also facing the same issue when using 4-way CPU for processing RFC_READ_TABLE I get following error (Error: DATA_BUFFER_EXCEEDED: Selected fields do not fit into structure DATA) .
when I set the NO_DATA=X in RFC_READ_TABLE then returned data object is empty , is this expected behavior ? if yes then how do we extract data without getting this error .Help is greatly appreciated

Export SAP GUI Logon system properites to another laptop

Hi, SDN Fellows.
I want to run SAP GUI logon systems in another laptop. After installing a new SAP GUI client. Instead of re-add the logon system properties, is that a way I can export and import from another laptop? Say I have 10 logon system properties (some with application server and some with logon groups), how do I pick the 8 of 10, and export to another SAP GUI in another laptop?
Thanks,
Kent

Hello Kent,
for SAP GUI for Windows 6.20 or 6.40, please have a look at [SAP note 512040|https://service.sap.com/sap/support/notes/512040], for SAP GUI for Windows 7.10 refer to [SAP note 1035560|https://service.sap.com/sap/support/notes/1035560] and for SAP GUI for Java please read chapter 7 of the manual included in the SAP GUI for Java installation.
Best regards
Rolf-Martin

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

SAP R/3 System analysis

Hello!
Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
The following functions should be included in this program:
- detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
- comparison against a SAP ERP 6.0 reference system
- extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
- syntax analysis of program code with respect of adjustement need
- quality control of own development
- control of amount of transports within different company areas
- control of user information, such a user type, logon date, etc.
- basic control, whether a sufficient authorization concept is available
- Identification of objects that should be considered for the archiving in oder to decrease the db-size
My question are:
- which tasks can be convered with SAP standard transactions what are the names of the transactions?
- which effort do I investigate for these tasks?
Thank you very much!
regards

Dear Thom,
To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes and http://service.sap.com/upgrade for functional changes.
Need to consider the following things:
For Reportsits custom developed program so unless there is any kind of change in requirement from the client regarding the layoutnothing needs to be changedI think it will work fine in ECC 6.0 toexcept few things may needs to be changed..so you need to discuss whether they want the reorts as it is right nowor want to change the layout (adding some new info/fields etc) of any reportso u need to modify the program for thoseand estimate accordinglyfor a medium complexitys Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing)so to modify it will be less than that (depending upon the scope of changes)
Now say for Batch Inputs(interface/Data Migration) using BDCyou need to see how many BDCs are thereagain if the field lengths and layouts are not changingthen no need to change anything (except the main thing..you need to change the obsolete function modulesthere are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0there are some new with enhanced functionality so you need to modify the BDCsand many cases it happens that the whole transaction screen changes for processin that case better to develop new BDCsso you have to consider those parameterlook into and estimate accordinglymodifying a BDC should not take more than 1 PD
Now say for Formsthere was no Smart form in 4.6Cform printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart formin that caseits complete new devso estimate accordinglya medium complexitys form should take 8 PD (FRSTDSCoding+Unit Testing)you can take it as 10 PD tooeven if client wants to keep it is as it was in older versionyou have to redevelop the layout in ECC 6.0 againas form printer is even client dependentmaximum you can copy the program associated with that form in the new version tooand your effort will be savedagain you have to consider if clients wants to change the layout too
Now for enhancementso in that case u need to see individual casesfor a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)
One more important thing is that the Unicode Compatibilitythis needs to be done.needs to change the code (variable name) accordingly.also Version management tool is used for the standard programs
Also pls find the following forums:
Re: Data Migration from 4.6C to ECC 6.0
List of transations supported in SAP 4.6c and not in ECC6.0
Re: Upgradation from 4.6C to ECC 6.0
Re: what's the advantage to upgrade 4.6c to ECC5.0...
RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
Upgrade batch inputs from 4.6C to mySAP ERP 2005
/thread/317225 [original link is broken]
Upgrade from SAP R/3 to ECC 6.0
Hope it will help you.
Thanks,
Atin
Reward points if it helps.

SAP R/3 System analysis before upgrade 4.6C -- SAP ECC 6.0

Hello!
Before the upgrade from R/3 4.6C to ECC 6.0 I would like to execute SAP R/3 system analysis.
The following functions should be included in this program:
- detailed analysis of system modifications (effort driver and risk factor during an Upgrade)
- comparison against a SAP ERP 6.0 reference system
- extension SAP tools, including RBE and conflict lists (SPAU/SPDD)
- syntax analysis of program code with respect of adjustement need
- quality control of own development
- control of amount of transports within different company areas
- control of user information, such a user type, logon date, etc.
- basic control, whether a sufficient authorization concept is available
- Identification of objects that should be considered for the archiving in oder to decrease the db-size
My question are:
- which tasks can be convered with SAP standard transactions what are the names of the transactions?
- which effort do I investigate for these tasks?
Thank you very much!
regards

Dear Thom,
To know the functionality changes u can refer http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes and http://service.sap.com/upgrade for functional changes.
Need to consider the following things:
For Reportsits custom developed program so unless there is any kind of change in requirement from the client regarding the layoutnothing needs to be changedI think it will work fine in ECC 6.0 toexcept few things may needs to be changed..so you need to discuss whether they want the reorts as it is right nowor want to change the layout (adding some new info/fields etc) of any reportso u need to modify the program for thoseand estimate accordinglyfor a medium complexitys Report dev it takes approx 9 pd (FRSTDSCoding+Unit Testing)so to modify it will be less than that (depending upon the scope of changes)
Now say for Batch Inputs(interface/Data Migration) using BDCyou need to see how many BDCs are thereagain if the field lengths and layouts are not changingthen no need to change anything (except the main thing..you need to change the obsolete function modulesthere are some in 4.6 c like for data upload ws_upload_*** is there 4.6C but obsolete in ECC6.0there are some new with enhanced functionality so you need to modify the BDCsand many cases it happens that the whole transaction screen changes for processin that case better to develop new BDCsso you have to consider those parameterlook into and estimate accordinglymodifying a BDC should not take more than 1 PD
Now say for Formsthere was no Smart form in 4.6Cform printer was there..though the same option is there in ECC 6.0 too..but better to go for/should go for Smart formin that caseits complete new devso estimate accordinglya medium complexitys form should take 8 PD (FRSTDSCoding+Unit Testing)you can take it as 10 PD tooeven if client wants to keep it is as it was in older versionyou have to redevelop the layout in ECC 6.0 againas form printer is even client dependentmaximum you can copy the program associated with that form in the new version tooand your effort will be savedagain you have to consider if clients wants to change the layout too
Now for enhancementso in that case u need to see individual casesfor a medium complexity enhancement it should take max 15 PD (FRSTDSCoding+Unit Testing)
One more important thing is that the Unicode Compatibilitythis needs to be done.needs to change the code (variable name) accordingly.also Version management tool is used for the standard programs
Also pls find the following forums:
Re: Data Migration from 4.6C to ECC 6.0
List of transations supported in SAP 4.6c and not in ECC6.0
Re: Upgradation from 4.6C to ECC 6.0
Re: what's the advantage to upgrade 4.6c to ECC5.0...
RE: Help required regarding to upgrade from R/3 4.6c to mySAp ERP 2005
Upgrade batch inputs from 4.6C to mySAP ERP 2005
/thread/317225 [original link is broken]
Upgrade from SAP R/3 to ECC 6.0
Hope it will help you.
Thanks,
Atin
Reward points if it helps.

Getting a runtime error on SAP R/3 System in Portal 6.0 SP6

Hi,
I just installed EP6.0SP6 on WAS6.0SP7 in Windows 2000/SQL2000.
When trying to config "SAP R/3 System" tab by going to System Administration -> System Configuration -> UM Configuration:
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : pcd:portal_content/administrator/system_admin/system_admin_role/com.sap.portal.system_admin_ws/com.sap.portal.system_configuration/com.sap.portal.uMPropertyEditor
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UMPropertyEditorComponent
User : Administrator
 at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
 at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
 at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
 at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
 at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
 at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
 at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:627)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
 at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
 at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:124)
 at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:250)
 at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:100)
 at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
 at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:931)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
 ... 38 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation, D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3812: code too large for try statement
 } catch(IOException _jspioex) {}
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:88: code too large for try statement
 try {
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:73: code too large for try statement
 try {
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:68: code too large for try statement
 try {
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3804: code too large for try statement
 } catch (ThreadDeath tde) { throw tde;
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:3805: code too large for try statement
 } catch (Throwable t) {
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:49: code too large for try statement
 try {
 ^
D:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.usermanagement.admin/work/pagelet/_sapportalsjsp_tabstrip3.java:22: code too large
 public void doContent(IPortalComponentRequest componentRequest, IPortalComponentResponse aResponse)
 ^
8 errors
 at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.launchCompilerProcess(J2eeCompiler_6_30.java:541)
 at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compileExternal(J2eeCompiler_6_30.java:370)
 at com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compile(J2eeCompiler_6_30.java:649)
 at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
 at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
 at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:119)
 ... 43 more
Any idea? Also, I notice some forum thread that mentions we cannot setup R/3 4.6c connection within Portal. Our user store/CUA is on R/3 4.6c.
Is this true?
Thanks,
Edmond

Hi Edmond,
it's not the ume, it's the com.sap.portal.usermanagement.admin package.
In order to redeploy it, go to following directory:
<drive>\usr\sap\<SAPSID>\JC<instance number>\j2ee\cluster\server0 \apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
look for the com.sap.portal.usermanagement.admin.par.bak, remove the suffix .bak and restart your engine.
Don't know of this helps, but maybe it's worth a try.
Regards, Karsten

SAP Business One System Requirement

Hi,
I have a client who is currently in SAP Business One 8.81 with PL 08.
There are 12 SAP Users and they have three active companies in SAP Business one, Two companies is integrated with Website , one company is using Zedit Ecommerce application and another is using Comgine ecommerce application. These two application create orders\invoice into SAP Business one which were placed through website.
Third company have the add-on which imports the EDI files and post invoices into SAP Business One. Each EDI file contains about 1000 invoices, all the thousand invoices get imports into SAP Business One in AR side as well as AP side (add-on create AP invoice and AR invoice). They also have add-on which create incoming payment for thousand of invoices.
Their current working process is one or two user imports the EDI file, one or two users makes payment other user correct the due date for the invoices or cancel and create new invoice(by creating credit memo) to correct error in invoice. On an average 6 users works at same time.
Company 1 and 2 work fine, but since more users are working on company three and EDI import and cash apply process continously using transaction tables two users always get clash, so sometimes we are receiving the deadlock error from SQL also many transactions are getting failed with different errors from SDK (these errors were related to SQL). I assume transaction getting failed because while one user is trying to create the invoice other user is accessing the same table. I see it always happen when SQL memory get above 70%.
Do any one have suggestion what is the recommended system configuration for this type of environment for both on client and server side? Do i need to host the SQL server in seperate machine and SAP server on different machine?
Client current system configuration is as follows.
SAP Business One 8.81 PL:08
Hardware Configuration of Server:-
Windows Edition : - Windows Server 2008 R2 Standard
Processor: Intel(R) Xenon(R) CPU E5645 @ 2.40 GHZ 2.39 GHz (4 Processors)
RAM : 12 GB
System Type : 64 - Bit Operating System
Your suggestion will be higly appreciated.
Regards,
Raja

Hi,
Are your users using one license at a time?.
I agree with idea to separate the 3rd company that using EDI import.
Create another Database server and restore the database. This will
allow faster transaction since database is already separated and add-on
consume much RAM.
With regards to your client you just change the Current Server from Choose Company log-on
and call the SQL server name.
You can separate you license and database server also.
Regards,
Clint

How to Create a SAP R/3 system in system configuration

Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.B

Hi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
     Connector
     - App. Host              : r3 server name
     - Gateway Host        :
     - SAP client             :
     - SAP System Name:
     - SAP System No.    :
     - Server Port             : 3200 (Default)
     - System Type
     - give system Alias
     User Management
     - Logon Method
                  UIDPW

UME: SAP R/3 system config

I'm trying to set User authentication to SAP R/3 system, not load balanced system, on the User Management Configuration values: Client=601, Userid=sapjsf, Password=pwd, sys id=s01, Group and Message server= no values, Application server= IP addreess, Sys. number=00, Max pool=10, Max wait=10000.
When testing connection, I got this message:
(System ID): com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: Open file 'sapmsg.ini' failed
(System ID & System Number): OK
now, is this an error? where is and what values are needed at sapmsg.ini file? as our SAP R/3 is not a load balanced system.
Did I miss any item for the setup, in dataSourceConfiguration_r3.xml? I made sure the SAPJSF "communication user" got the right sap role and authorizations,
Portal version : EP6 SP2 PL22
Regards,
AAAttar

Thanks Tan,
Yes it was Undocumented fun, When leaving SystemId, Group and Message servers blank, I was able to connect, and map the BW WAS6.2 users.
However R/3 4.6C user can not be referenced as an SAP UME for user logon directly, it must have a WAS6.2 or higher,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/9e/fdcf3d4f902d10e10000000a114084/frameset.htm
Regards,
AAAttar

How to upload the data into SAP R/3 System

I have a scenario to upload the flat file data into SAP R/3 System.
I will describe my complete scenario here so that it will be better understanding for you to suggest the solution.
The segments that relevant for the upload of customer master data, namely
HD : Header Segment
PF : Partner Function Segment
OP : Output Segment
TX : Tax Segment
CR : Credit Segment
CT : Customer Text Segment

I think you can achieve this with IDOC creation. If it is so follow the steps below.
Basic Type:
Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
Segments:
Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
Steps in creating Segments:
T.Code WE31
Enter the name for your segment type and click on the create icon.
Type the Short text.
Enter the variable names and data elements.
Save and Go back.
Go to Edit -> Set Release.
Repeat the steps to create more segments.
IDOC TYPE:
Business data is exchanged with an external system using the IDoc Interface.
IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
Steps in creating IDoc Type:
T.Code WE30 to create IDoc Type.
Enter the Object Name, Select Basic Type and click Create Icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDoc name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press enter
The system transfers the name of the segment type to the IDoc editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation.
Save it and go back.
Go to Edit -> Set Release.
Message Type:
Steps in Creating Message Type:
T.Code WE81.
change the details from Display mode to Change mode
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Assign Message Type to IDoc Type:
T.Code WE82
Change the details from Display mode to change mode.
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Reward Points if useful.

Upload of data into SAP R/3 System

The falt file data is in the form of segment types (HD,PF,TX,OP) and we have to upload it to SAP R/3 System by using the Function modules.
How i have to proceed?
Please ping to my question.

I think you are working with IDOC creation. If it is so follow the steps below.
Basic Type:
Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
Segments:
Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
Steps in creating Segments:
T.Code WE31
Enter the name for your segment type and click on the create icon.
Type the Short text.
Enter the variable names and data elements.
Save and Go back.
Go to Edit -> Set Release.
Repeat the steps to create more segments.
IDOC TYPE:
Business data is exchanged with an external system using the IDoc Interface.
IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
Steps in creating IDoc Type:
T.Code WE30 to create IDoc Type.
Enter the Object Name, Select Basic Type and click Create Icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDoc name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press enter
The system transfers the name of the segment type to the IDoc editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation.
Save it and go back.
Go to Edit -> Set Release.
Message Type:
Steps in Creating Message Type:
T.Code WE81.
change the details from Display mode to Change mode
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Assign Message Type to IDoc Type:
T.Code WE82
Change the details from Display mode to change mode.
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Reward Points if useful.

SAP Client numbering system

Similar Messages

Maybe you are looking for