SAP Cloud Marketing Lead How to Hide the Standard button action

Hi Experts,
In Marketing Lead TI screen button action event have 3 options
1) Convert to Sales Lead
2) Convert to Opportunity.
3) Convert to Account or Contact
I want to hide 2 option 1) Convert to Sales Lead and 2) Convert to Account and Contact from the Action button.
I have try to enhance the standard BO as shown below.
and when open the COD_Marketinglead_TI screen then i can not able to see 3 option under Action button.
Please anyone have idea about how to get these 3 options 1) Convert to Sales Lead 2) Convert to Opportunity. 3) Convert to Account or Contact under Action button.
Many Thanks,
Mithun

Thanks Dan for your reply.
I have few question
1) AP.CRM.Global:Lead is Marketing Lead BO or Sales Lead BO? if Not Marketing Lead BO then what is the correct path to extend the Marketing Lead?
2) I have extend the AP.CRM.Global:Lead BO when we enhance the screen it give the below options and i have selected the highlighted screen is it correct or not ?
After select the screen and click OK there are 4 screen comes automatically as shown below.
3) When i Open the COD_MarketingLead.TI screen in UI designer i can able to see this screen as shown below.
Here in this screen point 1 we can see that its COD_MarketingLead screen but in point 2 Screen Header Label is "Sales Lead" and point 3 under this Action button no 3 option available 1) Convert to Sales Lead 2) Convert to Opportunity. 3) Convert to Account or Contact. But when you open Marketing Lead we can able to see these option under the action event as shown below.
Help me how to get Marketing Lead Screen with above actions in UI Designer.
Many Thanks,
Mithun

Similar Messages

How to hide the "EXIT" button on the ESS Personal inf. iViews

Hello,
We are using SAP ECC 6.0 + SAP EP 7.0 + ESS 1.0 (latest Releases).
In the ESS iViews (Java WD) for Personal information (Adresse, Bank, Family, etc. there is the Button "Exit"..
Does any have any Idea where and how to hide this "Exit" Button in the iView/Java-WD?
Many Thanks,
Nazih

Hi Chris,
thanks for your reply.
If you mean to hide the button using the iView/WD Personalisation by rightclick on the iView in PCD and then Review, well yes i know this and i have tried this already before and we were able to hide some not required input fields in the Webdynpro, but we were not able to find and to hide the "EXIT" Button using the personalisation..!!?? you know why?
Why to hide the Exit button, i will tell you why, in the iView for maintainig the ESS Personal Information -> e.g. Adresse --> Edit Adresse View (Roadmap view No. 2) --> when User click on the Exit Button --> This will open new browser Window with ESS... ---> This second Browser Window (Pop up) would confuse the User, since he already have an opened window, so the Customer mean why open new window, since the user can simply click the Button Back and so his data are also saved..
How can we manage to control the behaviour of the Button, so the iView is closed safety without that new Pop-up windows are opened...
Many Thanks,
Nazih

How to hide the standard save button

Hi gurus,
I am using the javascript below in my BPS Web Ap to perform a check function on save. The Javascript runs the check function and then simulates the pressing of the standard save button. It works fine.
My problem is that I now need to hide the standard Save button as I don't want users to press it, just my code. But there is no option in the application builder to hide those standard buttons.
Is there some other way I can hide it? Or is there some way I can perform the save from JavaScript without having to have a Save button?
Cheers,
Tristan
<script type="text/javascript">
    function CheckAndSave()
            if (bspSubmit('FunctionButtonPerformCheck'))
                    bspSubmit('SaveButton1')
</script>
<span>
    <a href="#1" class=urBtnStd onClick="javascript:CheckAndSave();"
        <nobr>
            New Save
        </nobr>
    </a>
</span>

Hi,
If you have created your layout using transaction BPS_WB then you can hide the SAVE button.
Cheers,
Gimmo

SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

Hi Experts,
I have requirement to change the standard template format.
I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
Can anyone have idea how to solve this issue ?
Can we change the template within cloud system?
If Yes than How ?
Regards,
Mithun

The following are the instructions (November 2014 version of SAP Cloud for Customer)
Edit a Form Master Template
Overview
As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
Procedure
1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
3. Select the master template you want to edit and click Edit.
4. On the Form Master Template tab, do the following:
Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
7. Click Save and Close.
Result
If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

SAP Cloud For Customer How to Get the IP Address of Tenant

Hi Experts,
I need to know how to get the IP Address of our cloud Tenant ?
Can anyone know please tell me the process.
Many Thanks
Mithun

Hi Mithun,
In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
Thanks
Sunil Maurya

SAP Cloud Application Studio How to retrieve the details based on OVS in Product ID

Hi Experts,
I have small requirements in AdvanceListPanel. I have custom BO as mention below,
businessObject Demo {
               element ID : ID;
               node Sporoduct [0,n] {
                    element P_ID : ProductID;
                    element P_DES :   SHORT_Description;
                    element P_QTY : Quantity;
                    element P_NET : Amount;
I have attached the OVS on Product ID (P_ID) element.
I want to auto-fill the details under the AdvanceListPanel ( Product Desc , Product Net value ( Price) )
1) How to get the details of Product ( Prod Descr, Product Price etc ).
Please anyone have idea about this share your thoughts.
Many Thanks,
Mithun

Hi, Mithun
     What you want is to auto-fill the related details when you select a product from your OVS.
     That means you have to write your codes in Event After Modify.
     We normally use QueryByElements or some other query options given for a particular standard BO.
     It would be like that.
     var query=Product.QueryByElements;
     var selParams=query.CreateSelectionParams();
     selParams.Add(query.ProductID ,"I","EQ",this.P_ID );
     var result=query.Execute(selParams);
     for(var product in result){
     this.P_DES =product.Description;
What I have just written is just a sample code. You have to find the exact name of the attributes of a standard BO in Repository Explorer.
Hope this helps,
Fred.

How to hide the player button when publish a project?

My predecessor producted several swf files using Captivate 3. And I only get the swf files and don't get the *.cptx files.
However, now I need to publish them into a folder format, including the standard.htm, *.htm and *.swf.
So I tried to build a blank project, insert the swf file, say, test.swf , then publish it (click the "publish to the folder" and "export to html"). then I get the new folder test2, including standard.htm, test2.htm and test2.swf.
Now there is a problem, in the test2.htm and test2.swf, has two rows of player buttons,
The upper row of buttons are from the old file, test.swf. This is the real button that work.
The lower row of buttons are from the new file (test2.swf). But these are not what I want.
So I am wondering how I could delete or hide the lowe row of buttons from the new file.
That is to say, the visitor just need one row of player button.
Your reply will be greatly appreciated.

Go to Project > Skin Editor and untick the option for Show Playback Controls.
Then the only buttons will be for the original SWF.

SAP Cloud for customer how to get the Account ID and UUID from cloud

Hi Experts,
I have small requirement in cloud for customer.
How to get all the account id with UUID in excel sheet using any SDK or other ways?
Any way to get this information because i have tried using "Mass Data Maintenance" but not getting any information.
anyone know how can i get this information in cloud system?
Many thanks,
Mithun

Hi Mithun,
In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
Thanks
Sunil Maurya

Hide the Save button in tool bar in pdf form

Hi All,
I need to hide the save button in the tool bar in pdf form out put. I need not hide the print button, hand tool and etc.
I have seen some forum threads,but i am not able to get the answer.
I have refered this links
http://help.sap.com/saphelp_nw04/helpdata/en/e1/fd9841e2ebb05fe10000000a1550b0/frameset.htm
How to hide tool bar from Adobe Form
The above link contains some scripts,The code id used for hide the hole tool bar not only save button.
I need to hide only save button in the tool bar.
How to hide the save button in the tool bar ?
Thanks and regards,
Boopathi M

Adobe Designer 7.1 uses XFA 2.4
If you can upgrade to Adobe desinger 8.2 to be abel to use XFA 2.8 you can code in the following way:
Write the following code in the preSave method
if (do_not_save_condition == 1) then
xfa.event.cancelAction = 1
endif
Adobe Quote
cancelAction specifies whether to cancel a forthcoming action.
This property applies only to the following scripting events: prePrint, preSubmit, preExecute, preOpen, and preSign.
The user experience is determined by the scripting event that contains the cancelAction reference:
u2022 preOpen - The drop-down list does not expand to display the list of values.
u2022 preSubmit - Form submission does not occur.
u2022 preSign - The form is not digitally signed.
u2022 prePrint - No print dialog boxappears, and the form is not printed.
u2022 preSave The form is not saved. The user experience is that no action occurred.
Edited by: Reema Shahbazkar on Sep 10, 2008 7:54 PM
Using this, the save button will still be visible but, you can prevent the form from being saved.

ABAP WD, Change texts of the standard buttons in select options

Hi all,
I need to change the texts (Cancel, Check, Reset and Copy) of the standard buttons in select options (WDR_SELECT_OPTIONS).
How do i solve this?
Thanks

Hello Antonio,
Just hide the standard buttons and create your own one outside. If it's just regarding some probably missing translation, best is to go add the missing translation using se61.
Best regards,
Thomas

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How-to hide the portal file shares on Windows

Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven Dijkman

Hi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

HOW TO HIDE THE SLIN ERRORS

how to hide the slin errors

Hi Shilpa.
I would like to suggest my opinion,
Refered from,
[SAP HELP Library - Standard Reference for Errors and Warnings|http://help.sap.com/saphelp_nw04s/helpdata/en/43/00c5b7daf15166e10000000a1553f6/content.htm]
SLIN Infos point to possible (semantic) program errors. According to the situation, the program should be changed or the messages should be switched off.+
+Only the SLIN messages of this category can be switched off by means of special comments
Reference,
Use u201C#EC * to hide warnings from places that cannot be removed by proper typing.
[SDN Library - Standard Reference - PDF - Make ABAP code unicode enabled - Hide SLIN Error Messages|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c031aa90-0201-0010-b69d-88a278e158c8]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

How to hide the FRIEGHT CHARGES.. URGENT

hi guru's
Can anybody explain how to hide the frieght charges in PO print out.If the frieght vendor is different from Main vendor, my client wants to Hide the frieght charges only in Print outs, please any one explain the configuration details for this.
PLEASE EXPLAIN ME STEP BY STEP .. IM NOT GETTTING
thanks
sap mm

hi
path
SPRO>Materials Management>Purchasing>Conditions>Define Price Determination Process-->Define Calculation Schema
here select ur pricing procedure--> select control data and then in Print column put ' <b>X'</b> ( 10th column )
( Or use M/08 as short cut trnx )
Vishal...

SAP Cloud Marketing Lead How to Hide the Standard button action

Similar Messages

Maybe you are looking for