SAP components required for DUET Enterprise integration

Dear Team,
I have installed "SAP NW702" trail version in my "WS2008 R2 Data center" machine succesfully.
I would like to install DUET Enterprise to integrate both SAP and SharePoint2010.
Could you please let me know "Release","Level" and "Highest Support package" details for the below components ,
WEBCUIF
IW_FND
IW_CNT
IW_TNG
Securitylibs(Security library)
SAP Cryptographic library
Thanks
S.Jeeva

Hi,
Thanks for your response.
We have understand that SAP components have the "Highest Support Package" name for each item as listed in below.
Software Component      -        Release   - Level       - Highest Support Package
WEBCUIF                       -          701        -   0002      - SAPK-70102INWEBCUIF
IW_FND                         -          100        -   0001      - SAPK-10001INIWu2026u2026.
IW_CNT                         -          100        -   0001      - SAPK-10001INIWu2026u2026.
IW_TNG                        -           100        -   0001      - SAPK-10001INIWu2026u2026.
Could you please provide the complete "Highest Support Package" names for "IW_FND","IW_CNT" and "IW_TNG".
Thanks a lot
S.Jeeva

Similar Messages

SAP components required for implemeting SAP SRM MDM

Hi all,
Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
· Internal catalogs hosted and maintained by buyer?
· Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
· External catalogs hosted and maintained by vendor?
Thanks and regards
Harish

Hi Harish,
The SAP components you would be needed are
SAP MDM5.5 or 7.1
- MDM server
- MDIS server
- MDSS server
SAP SRM5.5 or 7.0
SAP SRM-MDM business content
WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
If you need an integration with backend system SAP PI will be used.
refer note
1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
refer article for understanding mdm catalog configuration steps
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
Regards,
Abhijeet
Edited by: abhijeet more on Apr 20, 2009 1:19 PM

SAP Components required for EHP1 Upgrade

Hi Experts,
I have started the process of downloading files for an EHP1 upgrade of our current BI System (ABAP Stack only, Netweaver 7), with a Target Stack of SPS07.
Using the Maintenance Optimizer, I have selected the appropriate Kernel, SPAM Version and BI Content Patches and Iu2019m now in a position to download the SAP Components.
I am a little confused as to the list of SAP Components that have been presented via the Maintenance Optimizer, which provides the following list:
SAP BASIS
File Name     Description     Version
KB70015.SAR     Basis Support Package 15 for 7.00     SAP BASIS 7.00
KB70016.SAR     Basis Support Package 16 for 7.00     SAP BASIS 7.00
SAP BASIS
File Name     Description     Version
SAP_BASIS701.SAR     Attribute Change Package 04 for SAP_BASIS 701     SAP BASIS 7.01
KB70107.SAR     Basis Support Package 0007 for 7.01     SAP BASIS 7.01
KB70101.SAR     Basis Support Package 01 for 7.01     SAP BASIS 7.01
KB70102.SAR     Basis Support Package 02 for 7.01     SAP BASIS 7.01
KB70103.SAR     Basis Support Package 03 for 7.01     SAP BASIS 7.01
KB70104.SAR     Basis Support Package 04 for 7.01     SAP BASIS 7.01
KB70105.SAR     Basis Support Package 05 for 7.01     SAP BASIS 7.01
KB70106.SAR     Basis Support Package 06 for 7.01     SAP BASIS 7.01
K-701DHINSAPBASIS.SAR     SAP_BASIS 701 Upgrade     SAP BASIS 7.01
SAP ABA
File Name     Description     Version
KA70107.SAR     ABA Support Package 0007 for 7.01     SAP ABA 7.01
KA70101.SAR     ABA Support Package 01 for 7.01     SAP ABA 7.01
KA70102.SAR     ABA Support Package 02 for 7.01     SAP ABA 7.01
KA70103.SAR     ABA Support Package 03 for 7.01     SAP ABA 7.01
KA70104.SAR     ABA Support Package 04 for 7.01     SAP ABA 7.01
KA70105.SAR     ABA Support Package 05 for 7.01     SAP ABA 7.01
KA70106.SAR     ABA Support Package 06 for 7.01     SAP ABA 7.01
K-701DHINSAPABA.SAR     SAP_ABA 701 Upgrade     SAP ABA 7.01
SAP BW
File Name     Description     Version
KW70107.SAR     BW Support Package 0007 for 7.01     SAP BW 7.01
KW70101.SAR     BW Support Package 01 for 7.01     SAP BW 7.01
KW70102.SAR     BW Support Package 02 for 7.01     SAP BW 7.01
KW70103.SAR     BW Support Package 03 for 7.01     SAP BW 7.01
KW70104.SAR     BW Support Package 04 for 7.01     SAP BW 7.01
KW70105.SAR     BW Support Package 05 for 7.01     SAP BW 7.01
KW70106.SAR     BW Support Package 06 for 7.01     SAP BW 7.01
K-701DHINSAPBW.SAR     SAP_BW 701 Upgrade     SAP BW 7.01
PI_BASIS
File Name     Description     Version
K-701DHINPIBASIS.SAR     PI_BASIS 701 Upgrade     PI_BASIS 7.01
K-70107INPIBASIS.SAR     PI_BASIS Support Package 0007 for 7.01     PI_BASIS 7.01
K-70101INPIBASIS.SAR     PI_BASIS Support Package 01 for 7.01     PI_BASIS 7.01
K-70102INPIBASIS.SAR     PI_BASIS Support Package 02 for 7.01     PI_BASIS 7.01
K-70103INPIBASIS.SAR     PI_BASIS Support Package 03 for 7.01     PI_BASIS 7.01
K-70104INPIBASIS.SAR     PI_BASIS Support Package 04 for 7.01     PI_BASIS 7.01
K-70105INPIBASIS.SAR     PI_BASIS Support Package 05 for 7.01     PI_BASIS 7.01
K-70106INPIBASIS.SAR     PI_BASIS Support Package 06 for 7.01     PI_BASIS 7.01
ST-PI
File Name     Description     Version
KITLRDA.SAR     ST-PI 2008_1_700: Add-On Installation     ST-PI 2008_1_700
KITLRD1.SAR     ST-PI 2008_1_700: SP 0001     ST-PI 2008_1_700
KITLRD2.SAR     ST-PI 2008_1_700: SP 0002     ST-PI 2008_1_700
KITLRD3.SAR     ST-PI 2008_1_700: SP 0003     ST-PI 2008_1_700
My confusion is that it doesnu2019t appear to be a full list, which is based on the assumption that I would have had to upgrade to the Latest SPu2019s, as viewed in the SLD first (see list below for reference)?
Is there a requirement to upgrade to the latest set of SPu2019s first, or can I upgrade to EHP1 SPS07 just using the list provided via the Maintenance Optimizer?
Our current SP levelu2019s:
In BOLD -        Current SP/PL ,   Latest SP
BI CONT 7.03                       8                  16
6*PI_BASIS 2006_1_700            4            11
SAP ABA 7.00          14          21
SAP BASIS 7.00          14          21
SAP BW 7.00          16          23
ST-PI 2008_1_700          1          1
VIRSANH 520_700          12          15
Any help, much appreciated,
Chris

Hi,
No it is not necessary to upgrade to the latest SPS of the current version first (NW 7.0) before upgrading to 7.01.
All what it requires is a minimum SP/SPS level & you are already on that & MOPZ has therefore proposed only the files for 7.01
SPS.
- Regards, Dibya

Install or upgrade Gateway 2.0 for Duet Enterprise FP1

Hi,
We are checking the technical feasibility for upgrading to Duet Enterprise FP1 from Duet Enterprise 1.0 and followed the Guide from the learning maps for FP1 (Preparing the Environment for Duet Enterprise u2013 Feature Pack 1). However we are confused if we have to install Gateway 2.0 on the existing Duet NetWeaver 1.0 system or if there is an upgrade to Gateway available for existing Duet Enterprise 1.0 installations. Please clarify and validate the steps if you have completed the same successfully or are in expert in this area:
1. Install/Upgrade Gateway 2.0 on Duet Enterprise system (require clarification here)
2. Upgrade to IW_TNG 200 on the Duet Enterprise system
3. Import XI content in ESR
4. Complete set-up for FP1
Please clarify step 1 and comment on the sequence of the other steps.
Regards,
Avishek.

Hi Avishek,
The upgrade from Duet Enterprise 1.0 to Duet Enterprise FP1 is supported.
Your Duet Enterprise 1.0 system would have SWCs like IW_FND 100, IW_CNT 100 (This is collectively called as Gateway 0.5)and IW_TNG 100. Now the system can be upgraded to Gateway 2.0 and then upgrade IW_TNG from 100 to 200.
You can get more details about the upgrade from the "Upgrade Guide" in Service Market Place. You can access it from service.sap.com/instguides -> SAP Business Suite Application -> Duet Enterprise -> Feature Pack1 of Duet Enterprise 1.0 -> Upgrade Guide.
Thanks,
Girimurugan

CRM ISA Software Components required for Netweaver CE 7.1

Hi Experts
We are planning to migrate CRM ISA Application to Netweaver CE 7.1 environment. Currently we are in Netweaver 7.0 portal in which our CRM ISA 5.0 component is running.
What are the Software components required for CRM ISA to be compatable for Netweaver CE 7.1 environment.
Basically we need to know the SCA versions for CRM ISA compatable for Netweaver CE 7.1
Any kind of documentation which describes SCA's and installation steps are very much helpful
Thanks,
cnu

Hi cnu,
Information about CRM Java component should be described in master guide, for example CRM 7.0 , these components are
SAP Shared Java Applications 7.0
SAP Java Data Dictionary 7.0
SAP CRM Java Applications 7.0
SAP Shared Java Components 7.0
SAP Shared Web Components 7.0
SAP CRM Java Components 7.0
SAP CRM Web Components 7.0
SAP IPC Mobile 7.0
TeaLeaf 4.5
you should be able to find the SCA files in service market place using these component name.
Interesting to know why would you migrate from 7.0 to 7.1? or you just want to PoC? I don't think SAP will you support you unless you have made a very good deal with them.
I also heard the version of web channel will bring some really good feature though it's still based on NW 7.0 with ehp, are you going to "migrate" it once again?
good luck,
Denny

Evaluation version for Duet Enterprise

Hi ,
i am looking for evaluation version for Duet Enterprise product , iam meanly microsoft oriented so i have problem in configure Duet Enterprise in SAP side is there any ready build VM which can help me in checking product

Hi Yomna,
Duet Enterprise is an add-on to both SharePoint 2010 and SAP NetWeaver 7.02; with additional SAP landscape behind that (e.g. SAP ERP, SAP HR, CRM, or so)
A simple VM with e.g. SharePoint and the Duet Enterprise add-on to SharePoint is thus insufficient; you can only evaluate Duet Enterprise if you also have a proper SAP landscape available.
Best regards, William.

Components required for each operation

Hi Friends,
In production order there are many operations. How can I know components required for each operation.
Thanks,
Kiran

Hi Kiran.
Select the operation in the prodcution order.
Hit component tab below.
You will find the component attached to the operation.
BR
Subbu.

Components required for sending Email from SAP [Kernel Release 46D]?

Hi All,
Can somebody please tell me the components and the Configuration settings required for sending Emails from SAP system[Kernel Release 46D] to the mail server[Win NT] using SMTP.
From note 455127, I understood that "Sap Internet Mail Gateway" is required and there are other settings to be done. (SAPconnect with RFC can only be used as the Kernel version is 46D)
It will be great if somebody can explain me in simple steps if He/She has done this before.
Thanks,
Varun

Varun,
sendmail comes with UNIX OS, there are versions of sendmail programs available for Windows too, but i guess you have to purchase them.
Another alternative is a discontinued product called SAP Exchange connector, if you have a Windows environment and MS Exchange server as your mail server, you could use a SAP exchange connector and get your SAP Email config done.
Regards,
Siddhesh

Problem in update operation for duet enterprise 1.0 from SharePoint end.

Hi Everyone, I have developed a sap netweaver duet enterprise 1.0 to send the data from sap to share point and from share point to sap. The problem is that I am able to test the data successfully from duet system in sap for all the operations Query, Read & Update and I am getting the required output.
But from share point end when they are hitting the data for Query, Read & Update operations the query and read operations are successful but the update operation is getting failed. I unable to trigger the break point for update operation. I have checked the log but in that i am getting BULK READ status.
Can anyone help me out in resolving this issue.
Thanks in advance
Regards
Srinu

Hi Binson,
I want to ristrict the crude operation (create, update etc) by giving roles in backend system. i am able to apply restriction at sharepoint end but i don't want that. i want SAP role based security.
So i want, according to given roles in backend system user is able to do operations at sharepoint.
Thanks & Regards
Virender Solanki

Future of SAP NetWeaver Portal besides Duet Enterprise!!!

What about the future of SAP NetWeaver Portal when you have Duet Enterprise? I think it would be a strategic collapse of SAP NetWeaver Portal while Sharepoint portal is running in Parallel. I can't see both portal running in parallel. From end users perspective, Sharepoint portal acceptability would be more high as far as UI and Microsoft services are concerned.
Discussion is required.

Hi Ghazanfar,
Duet 1.5 is still supported by both SAP and Microsoft. However, no more features will be developed on top of Duet 1.5. Keeping this in mind -- and also the fact that Duet 1.5 offered quite "static" scenarios (you cannot really enhance / modify anything) I would very much recommend to consider Duet Enterprise.
Right now Duet Enterprise does offer some scenarios out of the box but we already see a lot of partners jumping on Duet Enterprise and developing their own scenarios on top. In addition to that SAP & Microsoft are also currently planning to develop additional content on top of Duet Enterprise.
Using SharePoints BCS functionality you can also integrate Microsoft Outlook with Duet Enterprise. For example in the Starter Services that are available with Duet Enterprise we showcase how you can synchronize ERP contacts without any coding into Outlook. Obviously more fancy UIs will also require coding. But the fact is -- you can do it. If something is not as you like it, you can modify / adjust it.
So having said that I would clearly recommend to use Duet Enterprise instead of Duet 1.5 -- even if you have already SAP NetWeaver Portal running.
Regards,
Holger.

System requirements for BO Enterprise XI 3.0 with 3 cloned webi services

Helllo,
I'm wondering what the system requirements would be for a server to host a BO Enterprise system (XI 3.0) if it is connected to a SAP BW system.
The system should be able to cope with around 150 to 200 calls/requests maximum at a time.
The users log in into SAP and launches a request via an SAP screen with behind that an URL request that is constructed based on a guest account (max 200 requests at the time) for BO. Because it is always the same account (Guest) that is used over and over again I'm wondering what kind of additional requirements the system should support.
We did some stresstesting with 120 simultaneous users. Even with 3 cloned web intelligence processing servers it blocked several times.
For the moment it is running on following hardware specifications:
HRBOXI (Dell PowerEdge 2950 (Servicetag: GMZ834J))
Memory: 8 memory slots available on motherboard of which 2 are used (each is 2GB) Total available memory at this moment is 4GB.
CPU: 2 x Intel Xeon E5420 (quad core). There are 2 CPU sockets on the motherboard that are in use.
Disks: 2 x 146GB (15K) SAS
On that there is a 32bit operating system in use. We would like to start with upgrading that to 64 bit OS.
Can someone tell me if this machine is suitable for production purposes for BO Enterprise linked to an SAP BW on mainly HR-data? I mean by that does this machine has enough processors to be able to cope with 3 cloned webintelligence services at a time. And also enough RAM memory?
Many thanks Thierry Renaer

not of use anymore

Components Required for CIC Web Client

We have a question about CIC installation components for CRM 5.
When we check the "Upgrade Master Guide" for "mySAP Customer
Relationship Management" ( Pages 58 - 61 ) for all CIC components, we
do not find that JAVA components are required for CIC ( Like JCRM).
When we see details from Best Practices Doucment for CRM component matrix, we see that its required.
We are not sure what to do. We were under the impression that Java
components are not mandatory for CIC forCRM 5. All we need is TREX and IPC.
Can someone please clarify/confirm ASAP as system needs to be build
accordingly. If we do need JCRM, what functionalities is this required for?
Thanks for help in advance.

Hi Nikhil,
With 04s all required installations will be completed by default. Just that you have create a domain and the track to make use Webdynpro Components in NWDI.
Following are the SCs that are required.
DI Build Tool 7.00
SAP J2EE Engine 7.00
SAP Java Tech Services 7.00
This u can download from Service Market Place
Support Packages and Patches - SAP NetWeaver - SAP NETWEAVER - SAP NETWEAVER 7.0 (2004S) - Entry by Component - Development Infrastructure
Regards,
Nagarajan.

SAP DVD Required for ECC Installation

Dear Team,
I am using OS HPUX and Oracle 10 for ECC 6.0.
Witch -2 SAP DVD we required for ECC 6.0 Installation.
I Have all DVD .Witch-2 DVD i must copy in my Server.
I think
(1) Export 2 DVD
(2) Oracle 2 DVD
(3) Instance IMaster 1 DVD.
(4) Kernal 1DVD
(5) Java_Comp 1 DVD
is Any DVD we required for ECC 6.0 Installation.?
OR
Any DVD I am missing??????
Thanks
Manu

I suggest you read
- the installation Master Guide - which will tell you which DVDs you need for which scenario
- the Installation Guide to find out, which DVDs must be available in parallel
http://service.sap.com/instguides
Markus

Memory Requirements for Wily Enterprise Manager

Hi,
I am using Wily 8.0 and we are seeing slowness in SOLMAN JAVA stack and in Wily EM. Before throwing memory I am trying to understand following points. I have already gone through installation documents which does not cover following points
1> I understand Wily EM requires heap memory. Does Wily EM heap memory is same as JAVA heap, I mean both JAVA node and Wily EM access same assigned part of memory OR both JAVA node and Wily EM needs seperate memory? As per this I will throw more memory at box.
2> Installation guide say "Increase the heap size (u2013Xmx) of the Enterprise Manager if you have more than
~10 agents" but how much? I did not see any formula for this.
3> I am observing Wily EM process at O.S level is keep running continuously since I restarted it last time (which is weeks now). Is it normal?
Thanks

Amit,
Question 1.
Wily needs JVM Heap memory, which would be different from J2EE Instance HEAP. Adding additional physical RAM to your server will definitely help.
Question 2.
Set the Heap Size parameters to a minimum of 1024 MB
Initial Java Heap Size (in MB)
wrapper.java.initmemory=1024
Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=1024 ((higher the better....)
Set the Java VM parameter u2013Djava.awt.headless=true for all platforms.
Otherwise, the Enterprise Manager will need an X server, i.e., the DISPLAY
environment variable must point to a valid X Windows server.
The file to maintain the parameterization is EMService.conf available in the
standard insttallation path /usr/sap/ccms/wilyintroscope
Please refer to SAP Note 1273028
Question 3.
The process should be running for Wily to work (this is my understanding). We also have this running for months on our server.
Regards,
Ravi

IHelp required for IC Webclient integration with CTI

Dear all,
Kindly help me to find answers for the following issues.
How could we configure ICI interface in SAP CRM? and wher can I find documentation for it?
How ICI integrate with AVAYA Telephone system?
What does 'Connector' means? and who will provide it?
What other hardware we need for a successful call center setup?
Your solutions will be greatly appreciated.
Best regards,
Raghu ram.
Edited by: Raghu Ram on Aug 25, 2008 11:21 AM

Hi,
Telephone is PBX system. In order to connect the telephone system to SAP Phone(CRM system), you need CTI Server. CTI enables the integration to ICI of CRM System using XML/SOAP protocols.
ANI module is a part of the Telephone system which enables to identify the customer number in CRM application. In other words, as you said, it is the phone system passing the phone no. of the calling person to CRM system. CAD generated on the IVR module part of telephone system).
CTI transfers the CAD to CRM and BP is displayed in the Interaction Center.
Hope this helps your understanding. Please give points if so.
Thanks,
John

SAP components required for DUET Enterprise integration

Similar Messages

Maybe you are looking for