SAP Configuration Tool

I need to make few changes in UME properties for that I need to use/access SAP Configuration Tool. I need to know who (usually) have authority to access the same i.e. Basis, Consultants, ICT Lead etc.
Config Tool - Administration Manual - SAP Library
Any help in this regard would be highly regarded.
Thanks.

Hi Sean,
Every Java instance 7.0 has Config Tool under this path (In >7.3 this tool in web based):
/usr/sap/SID/JC<instance number>/j2ee/configtool
You could get configtool folder to execute this tool remotely. You must configure hostname & port. You will need user administrator credentials.
From my understanding, common scenarios to have access to this tool:
- SAP Basis administrator / SAP NW Portal developers (Customer's employees)
- SAP Basis consultants / SAP NW Portal consultant (Depending on customer rules or if customer have outsourced administration to services partner).
Hope this helps,
Kind regards

Similar Messages

BP Fact Sheet adding Multiple BI views using SAP configuration tool

Hi,
I am able to add multiple BI reports to the Fact Sheet using SAP standard Configuration. But all the views appear with the Same Heading "BI Report". Is there a way I can change the title "BI Report" to something more specific to the Report context using SAP Standard Configuration or a BADI.
E.g. Sales Data Report / Volume Analysis
instead of BI Report / BI Report
I am able to do so by creating my own BI inbound plugs for the interface definition in the component BP_FACTSHEET but I do not want to use that approach if their is a SAP standard way of doing it.
Any advice will be greatly appreciated.
Sumeet

Hi Sumeet,
If you want to change the title of the view then you have to go particular component and view .Then redefine this method IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION and give ur title in description variable.Or you can go to this component BSP_DLC_FS and change the title when you assign the view in particular tiles.
Thanks
Vishwas Sahu

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Make Business systems visible within SAP PI Tools

Hi!
I defined technical system and business system as well within SLD. Now I would like to see this business system within SAP PI tools (such as Integration Builder).
Question:
Which actions are requiered after the definition the technical and business system in order to work with these systems in SAP PI tools?
Is thers some documents describing this issue?
Thank you!

Hi,
The order for without party is simple, just import it, then
1. Create configuration scenario
2. Assign this system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
And for with party.
1. Create Party in Integration Directory
2. Assign business system to this party
Now when you create your scenario
1. Create configuration scenario
2. Assign this party and system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
>>- Creation of Party
First
>>- Creation of Business component
Second
>>- Creation of Scenario
Third
>>- Assign Business system
Fourth
Hope now it is clarified.
Regards
Suraj
Edited by: S.R.Suraj on Oct 1, 2009 4:33 AM

Com.sap.sdb.tools.databasemanagement.DM_Exception: Runtime environment erro

Hi,
using Database Studio when i click on Analyzer tab of Administration tool i get follow error:
19/05/2009      22:12:05
ERROR           Runtime environment error
1,OS error: 'No such file or directory'
Component     : UIDBM
Detail Message: com.sap.sdb.tools.databasemanagement.DM_Exception: Runtime environment error
1,OS error: 'No such file or directory'
     at com.sap.sdb.tools.databasemanagement.internal.DM_Session.execute(DM_Session.java:150)
     at com.sap.sdb.tools.databasemanagement.internal.commands.DM_BaseCommand.doExecute(DM_BaseCommand.java:130)
     at com.sap.sdb.tools.databasemanagement.internal.commands.DM_DatabaseCommand.doExecute(DM_DatabaseCommand.java:53)
     at com.sap.sdb.tools.databasemanagement.internal.commands.DM_BaseCommand.execute(DM_BaseCommand.java:69)
     at com.sap.sdb.tools.databasemanagement.internal.DM_AnalyzerLog.open(DM_AnalyzerLog.java:66)
     at com.sap.sdb.tools.databasemanagement.internal.DM_AnalyzerLogItems.readItems(DM_AnalyzerLogItems.java:99)
     at com.sap.sdb.tools.databasemanagement.internal.DM_AnalyzerLogItems.refresh(DM_AnalyzerLogItems.java:89)
     at com.sap.sdb.tools.ui.dbm.model.AnalyzerLogAdapter.fetchDeferredChildren(AnalyzerLogAdapter.java:82)
     at org.eclipse.ui.progress.DeferredTreeContentManager$1.run(DeferredTreeContentManager.java:207)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
is something wrong in my configurations or Analyzer tab cant check analyzer files from a remote server?
regards
Clóvis

Hi Lars,
file_getfirst ANALYZER#/20090520 returns:
0
     END
                2339                2339
keyname,mode,size,date,time,comment,filename
ANALYZER#/20090520/DBAN.prt     UNKNOWN     1080209     20090520     220608      DB Analyzer File     DBAN.prt
ANALYZER#/20090520/DBAN_LOGGING.csv     UNKNOWN     6670     20090520     220608      DB Analyzer File     DBAN_LOGGING.csv
ANALYZER#/20090520/DBAN_CACHES.csv     UNKNOWN     9686     20090520     220608      DB Analyzer File     DBAN_CACHES.csv
ANALYZER#/20090520/DBAN_FILLING.csv     UNKNOWN     7335     20090520     220608      DB Analyzer File     DBAN_FILLING.csv
ANALYZER#/20090520/DBAN_GC.csv     UNKNOWN     5392     20090520     220608      DB Analyzer File     DBAN_GC.csv
ANALYZER#/20090520/DBAN_TASK_IO.csv     UNKNOWN     7026     20090520     220608      DB Analyzer File     DBAN_TASK_IO.csv
ANALYZER#/20090520/DBAN_IO.csv     UNKNOWN     9976     20090520     220608      DB Analyzer File     DBAN_IO.csv
ANALYZER#/20090520/DBAN_TRANSACTIONS.csv     UNKNOWN     7319     20090520     220608      DB Analyzer File     DBAN_TRANSACTIONS.csv
ANALYZER#/20090520/DBAN_TASK_ACTIVITIES.csv     UNKNOWN     9721     20090520     220608      DB Analyzer File     DBAN_TASK_ACTIVITIES.csv
ANALYZER#/20090520/DBAN_LOAD.csv     UNKNOWN     8867     20090520     220608      DB Analyzer File     DBAN_LOAD.csv
ANALYZER#/20090520/DBAN_SHARED_SQL.csv     UNKNOWN     9370     20090520     220608      DB Analyzer File     DBAN_SHARED_SQL.csv
ANALYZER#/20090520/DBAN_STRATEGY_PRIMKEY.csv     UNKNOWN     5612     20090520     220608      DB Analyzer File     DBAN_STRATEGY_PRIMKEY.csv
ANALYZER#/20090520/DBAN_STRATEGY_INDEX.csv     UNKNOWN     10043     20090520     220608      DB Analyzer File     DBAN_STRATEGY_INDEX.csv
ANALYZER#/20090520/DBAN_STRATEGY_SCANS.csv     UNKNOWN     6193     20090520     220608      DB Analyzer File     DBAN_STRATEGY_SCANS.csv
ANALYZER#/20090520/DBAN_BACKUP.csv     UNKNOWN     4740     20090520     220608      DB Analyzer File     DBAN_BACKUP.csv
ANALYZER#/20090520/DBAN_TASK_STATES.csv     UNKNOWN     6088     20090520     220608      DB Analyzer File     DBAN_TASK_STATES.csv
ANALYZER#/20090520/DBAN_OVERVIEW.csv     UNKNOWN     6759     20090520     220608      DB Analyzer File     DBAN_OVERVIEW.csv
ANALYZER#/20090520/DBAN_REGIONS.csv     UNKNOWN     5552     20090520     220608      DB Analyzer File     DBAN_REGIONS.csv
ANALYZER#/20090520/DBAN_RW_LOCKS.csv     UNKNOWN     5379     20090520     220608      DB Analyzer File     DBAN_RW_LOCKS.csv
ANALYZER#/20090520/DBAN_SPINLOCKS.csv     UNKNOWN     4720     20090520     220608      DB Analyzer File     DBAN_SPINLOCKS.csv
ANALYZER#/20090520/DBAN_IOTHREADS.csv     UNKNOWN     5073     20090520     220608      DB Analyzer File     DBAN_IOTHREADS.csv
ANALYZER#/20090520/DBAN_CPU_UTILIZATION.csv     UNKNOWN     8835     20090520     220608      DB Analyzer File     DBAN_CPU_UTILIZATION.csv
file_getfirst ANALYZER#/20090520/DBAN.prt returns:
1
CONTINUE
             1080209               15917
===== #0          at 2009-05-20 09:05:30
* I Number of CPU's 4, processor type: x86_64
      CON: NUM_PHYSICAL_CPU > 1
      VAL: 4                > 1
* I Physical memory 3943 MB, virtual memory 6000 MB, memory allocated from instance: 3246 MB
      CON: NUM_PHYSICAL_CPU > 1
      VAL: 4                > 1
* I Operating system: Linux 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:32:02 EDT 2006
      CON: 1
      VAL: 1
* I Kernel version: Kernel    7.6.03   Build 007-123-157-515
      CON: 1
      VAL: 1
* I Instance SUNDOWN (dcpr0136n) is up since 2009-05-18 21:45:40
      CON: 1
      VAL: 1
* I Configuration: number of CPUs (MAXCPU): 4, max user tasks: 500
      CON: 1
      VAL: 1
* I Size of data cache 2045.56 MB
      CON: DATA_CACHE_SIZE > 1
      VAL: 2094656         > 1
* I Number of data volumes: 5
      CON: 1
      VAL: 1
* I PACKET_SIZE is 131072
      CON: ENV_PACKET_SIZE
      VAL: 131072
* I SQL commands executed: 12921239
      CON: SQL_Cmds > 0
      VAL: 12921239 > 0
===== #1          at 2009-05-20 09:06:20
* I SQL commands executed: 6346, avg. 97 per second
      CON: PureSQL_Cmds > INTERVAL * 5
      VAL: 6346         > 68       * 5
* W3 69 command cache cleanups! 6 commands reloaded, 40960 execution plans and 188 commands deleted
      CON: CmdCacheCleanups > INTERVAL
      VAL: 69               > 68
* W3 Task 120 (appl. 0) is waiting for lock 'row_exclusive' on table TITULOPAGAMENTO since 68s, locked 'tab_share' from task 429 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2898305"] == last(LOCK_REQUESTOR_TID["             2898305"]) && LOCK_WAITER_TRANS["             2898305"] == last(LOCK_WAITER_TRANS["             2898305"])
      VAL: 120                                        == 120                                              && 2898305                                   == 2898305
* W3 Task 429 (appl. 0) is waiting for lock 'tab_share' on table TITULOCOBRANCA since 68s, locked 'row_exclusive' from task 348 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2880370"] == last(LOCK_REQUESTOR_TID["             2880370"]) && LOCK_WAITER_TRANS["             2880370"] == last(LOCK_WAITER_TRANS["             2880370"])
      VAL: 429                                        == 429                                              && 2880370                                   == 2880370
* W3 Task 361 (appl. 0) is waiting for lock 'row_exclusive' on table TITULOPAGAMENTO since 68s, locked 'tab_share' from task 429 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2921405"] == last(LOCK_REQUESTOR_TID["             2921405"]) && LOCK_WAITER_TRANS["             2921405"] == last(LOCK_WAITER_TRANS["             2921405"])
      VAL: 361                                        == 361                                              && 2921405                                   == 2921405
* W3 Task 313 (appl. 0) is waiting for lock 'row_exclusive' on table TITULOPAGAMENTO since 68s, locked 'tab_share' from task 429 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2913185"] == last(LOCK_REQUESTOR_TID["             2913185"]) && LOCK_WAITER_TRANS["             2913185"] == last(LOCK_WAITER_TRANS["             2913185"])
      VAL: 313                                        == 313                                              && 2913185                                   == 2913185
* W3 Task 135 (appl. 0) is waiting for lock 'row_exclusive' on table TITULOPAGAMENTO since 68s, locked 'tab_share' from task 429 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2918713"] == last(LOCK_REQUESTOR_TID["             2918713"]) && LOCK_WAITER_TRANS["             2918713"] == last(LOCK_WAITER_TRANS["             2918713"])
      VAL: 135                                        == 135                                              && 2918713                                   == 2918713
* W3 Task 563 (appl. 0) is waiting for lock 'row_exclusive' on table TITULOPAGAMENTO since 68s, locked 'tab_share' from task 429 (appl. 0, state Vwait)
      CON: LOCK_REQUESTOR_TID["             2911020"] == last(LOCK_REQUESTOR_TID["             2911020"]) && LOCK_WAITER_TRANS["             2911020"] == last(LOCK_WAITER_TRANS["             2911020"])
      VAL: 563                                        == 563                                              && 2911020                                   == 2911020

Configuration tool

Do any one can expalin me about the configuration tool and give any link for guide line purpose

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/f69f3f12e1eb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/2f/f79f3f12e1eb0ce10000000a114084/frameset.htm
Template Configuration Tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc68ec90-0201-0010-cd85-de89a636a663
Regards,
Prateek

Query - JDI Template Configuration Tool...Please guide

Hello All,
Am working on 04 version and have finished installing & configuration of basic NWDI components.
There is an additional configuration of 'Template Configuration Tool'
And as far as I read...its use is into administration and not development.
Questions:
1. Can I skip this configuration? The installation doc does not mention it as optional or mandatory though.
2. What could be the implications if I skip this step?
3. The description says this tool provides a framework to NetWeaver components to create their own configuration templates.
Please give me some examples to understand this better.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

5.1 Template Configuration Tool
Purpose
This component is a tool for configuring the J2EE Engine and the SAP NetWeaver
components running on top of it. To configure the system properly, the Template
Configuration Tool uses specially designed templates for each component.
You can find the latest information about the Template Configuration Tool and
the related configuration templates in SAP Note 739788.
Implementation Considerations
The installation procedure of the J2EE Engine and the SAP NetWeaver components provides the system with a default configuration. You can run the system using the initial configuration;however, this does not guarantee that the available resources are utilized optimally or that the system will function properly. Using the Template Configuration Tool and the templates provided by each component, you can easily adjust the infrastructure to the particular needs of the scenario that you are running. Therefore, we recommend that you run the Template Configuration Tool after installing the J2EE Engine.
The Template Configuration Tool is run only once for each server instance. If
you expand the cluster vertically later on by adding new instances to it, you
should run the tool on each new instance, so that all instances in the cluster
are configured in the same way.
Integration
While the Template Configuration Tool provides the framework for processing the templates, each SAP NetWeaver component provides its specific template.
Features
The Template Configuration Tool is the framework that enables other SAP NetWeaver
components to create their own configuration templates. You can use the tool to apply and restore a particular system configuration.
You can choose to apply the appropriate configuration templates depending on your
particular scenario. For example, you may choose to apply a template for an Enterprise Portal scenario where you have a portal running on top of the J2EE Engine. Note that this may influence not just the configuration of the component itself, but also the settings of the J2EE Engine.
The tool is instance-based that is, it configures the J2EE Engine based on the available hardware resources on a particular host, as well as some additional settings such as allocated memory. This means that you must run the tool separately for each Java instance that you have installed.
The Template Configuration Tool is designed to automatically detect most of the parameters that are used to define the configuration of the system. The tool provides wizards that guide you through the process of choosing which function you want to use, selecting the appropriate templates, and filling in the required parameters.

E5 and Configuration tool

Hi,
Does anyone have information on E5 and Nokia Configuration tool. It's not on the list of supported devices. This seems a bit odd, because it is an E-series machine. Any news on this would be appreciated
thanks

I did a connection test and the results are succesful
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mnxksrv056.digital.com:8100)
5. The host name mnxksrv056.digital.com was resolved successfully.
6. The Web AS ping service http://mnxksrv056.digital.com:8100/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mnxksrv056.digital.com:8100/sap/bw/BEx/ was obtained successfully.
I` am still puzzled where its picking up that hostname and the coming up with an error
Any ideas are welcome

Visual Configuration Tool (VCT)

Hello experts,
I would like to learn / use the Visual Configuration Tool (VCT).
What way or what transaction must I execute ?
Have somebody any documentation about (VCT)
Regards
Juan

Hi Juan,
pls surf through the link mentioned below:
http://help.sap.com/saphelp_sm32/helpdata/en/eb/e8dbabe53d11d4b36c0050da429303/frameset.htm
Reward with Points!

Person who done the Sap GRC Tool Setup

Hi Experts,
   Hope you are doing well.
i m need in SAP GRC.
    I need to do the lab setup of SAP GRC tool in our company .to do that what the setup we require (software and hardware). Its help me if you provable me in details.
    As of now I have installed IDES ECC6 (Hardware: win 2003, 2 GB ram, 250 GB Hard disk) in company Lab.
Query,
1, what are software and server I need to setup to work on Sap GRC in LAB.
2, What are the added on software we need to SAP GRC Tool (In details)
3, Can I get SAP GRC (trial ver) and patch ( In details) . I have OSS id to download also in SAP Site
Thanks for your Support
Regards
keshava

1, what are software and server I need to setup to work on Sap GRC in LAB.: You need at the bare minimum a system running Netweaver AS 7.0 JAVA with SP12. You could run it on the same system as your ECC installation, but I would not recommend this in a production environment due to performance overheads.
2, What are the added on software we need to SAP GRC Tool (In details): In addition to your NWAS7.0 JAVA server, you'll just need the installation files downloaded through service marketplace and follow the configuration guide from the same place.
3, Can I get SAP GRC (trial ver) and patch ( In details) . I have OSS id to download also in SAP Site: I don't believe you can get a trial version of GRC AC 5.3, but you might consult your SAP rep to make sure.

Difference between EEWB - UI Configuration Tool - AET

Hi Folks ,
I needed some clarity on the difference of EEWB - UI configuration Tool and Application Enhancement Tool .
Will be gre8 and if any one can explain me in detail.
Thanks in Advance
Regards,
Amrita
Edited by: Amrita Amrita on Mar 27, 2011 9:13 PM

Hello Amrita,
Following are the differences and points how AET is different from EEWB:
AET is a UI Framework tool that is used by application to enhance their application DB and BOL structure
AET only creates field in CRM system. It does not create any field in remote system and does not do any synchronization.
AET lets you define dropdown list boxes for custom fields
AET allows you to translate field labels and entries in dropdown list boxes.
For documentation, click [http://help.sap.com/saphelp_crm70/helpdata/EN/20/b0f4f819e844df9f47bc9c70c795f4/frameset.htm|here].
Hope this helps.
Thanks
Vishal

Oracle 8i Configuration Tools Fails on Install

I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
Rafael

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

OCS 2007 R2 Response Group Configuration Tool Failure

Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FR

Hi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SAP Configuration Tool

Similar Messages

Maybe you are looking for