SAP connector info

I am working with SAP connector at a customer and I see that the versions supported by OIM is:
SAP R3 4.6C (running on Basis 4.6C)
SAP R3 4.7 (running on WAS 6.20)
MySAP ERP 2004 (ECC 5.0 running on WAS 6.40)
MySAP ERP 2005 (ECC 6.0 running on WAS 7.00)
The customer tells me that they have:
Netweaver 7.0 (previously 2004s) and we are running ECC 6.0 w/WAS 7.0 (SP 18)
I do not see Netweaver mentioned anywhere in the SAP connector docs.
Can someone please tell me if the version at customer is supported by OIM SAP connector?
thanks

As Netweaver is a totally different technical platform I would find it unlikely that it would be supported unless specifically stated.
Best regards
/Martin

Similar Messages

No connection from SAP EP to Raytion SAP Connector

Hello,
The Raytion SAP connector 1.5.1 has been deployed without any problems on the customer SAP EP (Production). We see that no connection can be made from the SAP EP to this SAP Connector.
Extract from the log file: (10.54.17.63 is the IP address from the Raytion SAP Connector server.)
2008-04-03 13:30:40,082 DEBUG resource allowed by watched repository filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by hidden filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by size filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by Exclude RegEx filter: true
2008-04-03 13:30:40,097 DEBUG resource released by timebased service: true
2008-04-03 13:30:40,097 DEBUG resource released by statemanagement service: true
2008-04-03 13:30:40,191 INFO about to post /Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml
2008-04-03 13:30:42,082 WARN could not connect to connector server at http://10.54.17.63:16050/DataSource. http://portaal:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:32,552 INFO Start security update initiated by Connector Server
2008-04-03 14:47:34,240 WARN could not connect to security cache at http://10.54.17.63:16050/Security. Start update notification not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:34,240 ERROR Could not send security synchronisation start notification. No server available.
The contractor that installed this, thinks the next area to look to is to see if the SAP EP has been configured somehow to stop outgoing http traffic from applications running within it... Maybe the EP is blocking outgoing HTTP access, although other components from the EP are working OK.
How can we check this?
Please advise.
Kind regards.

Check the following Links:
I want an explanation for this connection between R/3, CRM and IPC ??????
Document flow from R/3 to CRM
BP Changes From CRM to R/3
BP Changes From CRM to R/3
Reward Points if useful.

SAP Connector accessing Cluster Tables

We are using OWB 10gR2 to extract data from SAP. We have no problems extracting 'normal' tables from SAP, but the problem we face is that when we try to extract what is known as Cluster Tables in SAP, the OWB generated ABAP code causes problems to the SAP application when run.
Has anyone come across this? Can you extract Cluster Tables from SAP using the SAP Connector?
For info. we are using SAP Connector R/3 version 4.7.
Thanks in advance !

May you give me a help!
You have done what i m trying to do from 10 days...
working the sap connector..
What is the module function in sap you invoke from the Connector?
The version of librfc32.dll you used is the recommended version and build?
Thanks & Greetings
Roberto from Rome

SAP Connector View

Hi experts,
I am working on EP 7.0, and i am looking for the iview SAP Connector iview (as previously in EP version, as named changed now in latest version), so you guys can guide me that which iview is the in EP 7.0.
thanks in advance
Iqbal Ahmd

Hi Iqbal,
You need to do three different activities here
1)Creation of System object at System Admin side
2)Assigning the system alias to the particular user
3)Creation of iView in the Content admin side
Creation of System object
->sys admin, sytem configuration workset
->system landscape page(The steps may vary in EP 7...I am doing it in EP6)
-Under portal content,select our folder,new system, select sap r/3 dedicated
->provide system name and id.->Finish
under the properties.....select connector:
Application host: enter the ip address of the sap-r/3
then provide the logical system name
enter the client number.........
server port...for sap-r/3 it is 3200
s/m type...select the sap system you are trying to connect with.
and under the user management property
logon method---uidpw
usermapping type--admin, user
save everything.
Now to create the system alias.....goto edit on the top right corner, select system alias.
provide name,for the system alias.
click add..save.
User mapping
->user admin role->user mapping ws, find out the user.now edit the user info....select system alias under system..
provide userid and pswd to enter into the sap system.
now got to Content admin to create an iView
here under the type of iView, select SAP Transaction iView, now select GUI for windows..select the system alias already created....transaction code is SE11...finish..
Put the iView in a page...ws, role...the usual stuff...
all the best..... Do include your mail id if you are looking for some docs.
Cheers.....

ECC SAP Connector with OIM

Hi,
I have configured ECC SAP Connector on OIM which is running on JBOSS.
The configuration is successful.However when i try to provision user i am getting exception as below--
Point to be noted here is i am using ECC Sap Type not CUA.
2008-11-24 20:37:43,763 INFO [STDOUT] Running SAP CUA Create User
2008-11-24 20:37:43,763 INFO [XL_INTG.SAPCUA] createUser(): Create User Request
2008-11-24 20:37:43,810 INFO [XL_INTG.SAPCUA] createUser(): userId :EAI_12, userGroup:,lastName:eai_1212,firstName:eai_12,userTitle:,langComm:,department:,langLogIn:,timeZone:,telephone:,extension:,Fax:,email:,dateFormat:,decimalNotation:,function:,roomNo:,floor:,building:,code:,commType:,alias:,startMenu:,userType:,RoleProfile:admin,RoleProfileOption:Profile
2008-11-24 20:37:43,810 INFO [XL_INTG.SAPCUA] SAP CUA Create Connection Request
2008-11-24 20:37:43,826 INFO [XL_INTG.SAPCUA] createCUAConnection(): START SAP Connection creation.
2008-11-24 20:37:44,982 INFO [XL_INTG.SAPCUA] createCUAConnection(): SAP Connection creation successfull.
2008-11-24 20:37:45,154 INFO [XL_INTG.SAPCUA] getStatus() :returnStructure:User EAI_12 does not exist
2008-11-24 20:37:45,154 INFO [XL_INTG.SAPCUA] getStatus() :Type:I
2008-11-24 20:37:45,154 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:124
2008-11-24 20:37:45,154 INFO [XL_INTG.SAPCUA] findUser(): User not exist in SAP CUA
2008-11-24 20:37:45,154 INFO [XL_INTG.SAPCUA] createUser(): Create User Start
2008-11-24 20:37:46,701 INFO [XL_INTG.SAPCUA] getStatus() :Mesage :User EAI_12 created
2008-11-24 20:37:46,701 INFO [XL_INTG.SAPCUA] getStatus() :Mesage Type:S
2008-11-24 20:37:46,701 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:102
2008-11-24 20:37:46,701 INFO [XL_INTG.SAPCUA] addProfileToUser():Add Profile to User
2008-11-24 20:37:46,748 INFO [XL_INTG.SAPCUA] getStatus() :Mesage :You have not logged onto the central system
2008-11-24 20:37:46,748 INFO [XL_INTG.SAPCUA] getStatus() :Mesage Type:S
2008-11-24 20:37:46,748 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:351
2008-11-24 20:37:46,779 ERROR [XL_INTG.SAPCUA] addProfileToUser():Profile: admin is not added to user: EAI_12 for System: ECC
2008-11-24 20:37:46,779 INFO [XL_INTG.SAPCUA] createUser():Unsuccessful in assigning the profile to the User.
2008-11-24 20:37:46,779 INFO [XL_INTG.SAPCUA] deleteUser(): Delete User Start
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage :Role assignment to user EAI_12 deleted
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage Type:S
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:090
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage :Role assignment to user EAI_12 deleted
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage Type:S
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:090
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage :Role assignment to user EAI_12 deleted
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage Type:S
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] getStatus() :Mesage NUMBER:090
2008-11-24 20:37:48,138 INFO [XL_INTG.SAPCUA] deleteUser(): User deleted SUCCESSFUL
2008-11-24 20:37:48,138 DEBUG [XL_INTG.SAPCUA] createUser(): EAI_12:SAP.USER_CREATION_FAILED
If you have faced such an issue earlier.Please provide me pointers.
Thanks

Rename the copied file to match the VOYAGER_ID property. For example, if the target system has VOYAGER_ID = VOYAGE14, then the .properties file should be named VOYAGE14.properties.
The Voyager reconciliation agent sends a unique identifier value, called VOYAGER_ID, each time a reconciliation event occurs. This value must match the name of the .properties file being used by the topsecret-adv-agent-recon.jar file for reconciliation.

SAP Connector no longer working after upgrade

After upgrading from EP 6.0 SP2 Patch 2 to Patch 3, our iViews using the SAP connector framework is no longer working. No connection is obtained. Even the examples in the PDK has stopped working. It seems that maybe some files have disappeared (in folder ".../server/services/eisconnector/work").
Any ideas?
Hilde

Hi Hilde,
1. please have a look in the Visual Admin Tool -> Services -> EISConnector ans see if the SAP Connector is deployed there. if you see it there, so it is deployed.
2. try to remove and add agian the SAP Connector (in the same place as from section one)
3. why dont you use the last Portal Patch and J2EE patch?
4. do you see any special exception in the Log file?
Regards,
Aviad

How to upload data into SAP BW Info Objects using SAP XI

Hi,
I need to upload master and hierarchy data into SAP BW Info Objects using SAP XI as EAI.
Can anyone suggest me the best solution to do it.
Thanks in Advance,
Volker.

Hi! Have you not checked the BW-XI Integration document? It is available on the main page of the SDN section for XI. Almost all the steps for the integration are there...

SAP Connector

Hello,
when i will make a bapi call by the sap connector framework, what i have to do? Can i take the sap connector framework wizard? But i become a error-msg:
Error This compilation unit indirectly references the missing type javax.resource.cci.ResourceAdapterMetaData (typically some required class file is referencing a type outside the classpath) BspConnectorAppConnection.java BspConnectorApp/src/com/gft/connector/connection line 0
Only the jdbc connector is default on the sap application server. When I will make a bapi call, which connector i need (java?) and i have to pay for that or not - example please?
Thanks,
Frank

Hello Frank,
have a look at this thread: How to read R/3 table and show it in SAP EP 6.0 I hope it helps.
Regards
Gregor

SAP.Connector.RfcCommunicationException

When call SAPProxy function, a SAP.Connector.RfcCommunicationException raised
Please help me to analysis the cause and solution.
My doubt is if the Gateway is indispensible for a .NET Connector function call
Thanks in advance
Detail information:
Exception.Message:
Connect to SAP gateway failed\n
Connect_PM GWHOST=157.55.20.224, GWSERV=sapgw00, ASHOST=157.55.20.224, SYSNR=00\n\n
LOCATION CPIC (TCP/IP) on local host\n
ERROR partner not reached (host 157.55.20.224, service 3300)\n\n
TIME Thu Dec 09 13:13:01 2004\n
RELEASE 620\n
COMPONENT NI (network interface)\n
VERSION 36\n
RC -10\nMODULE ninti.c\n
LINE 979\n
DETAIL NiPConnect2\nSYSTEM CALL SO_ERROR\n
ERRNO 10060\n
RRNO TEXT WSAETIMEDOUT: Connection timed out\n
COUNTER 1\n
The code lines as following:
string cs = "ASHOST=157.55.20.224 SYSNR=00 CLIENT=000 USER=xxxx PASSWD=xxxxxx";
// construct the proxy with connection string
SAPProxy1 proxy = new SAPProxy1(cs);
// create a SAP Table variable
BRFCKNA1Table tblCust = new BRFCKNA1Table();
// call the RFM method on the proxy
try
proxy.Rfc_Customer_Get("","A*", ref tblCust);
catch(SAP.Connector.RfcCommunicationException exp)
MessageBox.Show(exp.Message);
return;

Hi Reiner,
One of my partners are having this problem...
1. They are having a dev server of ip 200.1.12.xx and remote site has network with ip 171.xxx.xxx.xxx
2. Another subsidiary needs to use NCo to access this server
3. They are using two firewalls, one from Buiding A and another in Building B
4. all ports of firewalls are open, there IP mapping from firewall in Building A to IP in firewall in Building B.
5. Building A being the remote building, can log on via SAP GUI, however, unable to connecto via NCo
6. What seems to be the problem and what can I tell the basis guy to check?
How does NCo support firewalls and waht is the best way to work around this?
Your help is much appreciated.
Cheers

SAP Connector: Retrieve Business Components?

Hello,
i am evaluating the features of the SAP Connector. I deployed the login-data and checked the connection ("Success!"). Then I tried to import metadata.
I see the Message "Retrieving Business Components.." for e few seconds, then it disappears. There is no metadata imported and no error message.
I tried this both with 10gR1 and 10gR2.
Can you help me?
Tobias

Which version of SAP system are you connecting to?

SAP.Connector.Rfc.dll installing to 2 directories

I am installing SAPGUI Frontend components including the BW and BI add-on components on a Windows XP/SP2 system with .NET 1.1 already loaded.
I've read on this forum that SAP.Connector.Rfc.dll and other .NET assemblies are installed to the GAC, but I saw on a test machine where this assembly (and others) were installed to both the GAC and to the ProgramFiles\sap\frontend\bw directory as well.
Is there a requirement for the .NET assemblies to be in the bw directory ( or other private SAP directory as opposed to the GAC? )
If anybody from SAP knows the answer, it would be much appreciated. Thanks!
Thanks,
Owen
Message was edited by:
Owen Gilmore

Hi Sowmya C,
How are you doing ?
Upon addition of any SAP component, the reference is added automatically.
However, in the event that the reference to "SAP.Connector.dll"
is not present, you can add it through the references tab, provided that the SAP.NET Connector is installed on the local machine [as this will allow you to add the dll reference locally, like you would reference anyother local assembly]
It is of type .NET dll
with respect,
amit

SAP Connector 2 - Could not load file or assembly 'SAP

Hi all,
I've recently installed SAP .NET Connector 2 and have been developing a basic C# web form to interrogate the customers table. I have created all my code and done a successdul build. However, when I try to run the web form I get the following error:
Could not load file or assembly 'SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23' or one of its dependencies. The system cannot find the file specified.
The SAP.Connector.dll and SAP.Connector.Rfc.dll files are on both my development machine and the server I am deploying the project on. Any ideas ?
Thanks.

Fixed it myself. In the solution browser, expand the reference section and in the properties for the SAP.Connector and SAP.Connector.Rfc set the 'Copy Local' parameter from False to True. This fixes the issue.

SAP connector and VS2005

Can SAP connector 2.0.1 be install in a pc which has only VS2005? I tried to install it and I received the following error:
YOU MUST FIRST INSTALLVISUAL STUDIO NET 7.1 INTEGRATED DEVELOPMENT ENVIRONMENT (IDE).
Can someone tell me if I can connect to SAP from VS2005 and how?
Thanks in advance

Hi,
SAP Connector for MS .NET is not currently supported on Visual Studio 2005.
Please check the article Using SAP Connector for MS .NET (NCO) in Microsoft Visual Studio 200 to learn a workaround that enables easy design-time connectivity to SAP back-end systems in Visual Studio 2005 by creating the connector proxies in Visual Studio 2003 and porting them to Visual Studio 2005.
The link to this article is available in the Development Center under Additional Resources.
Regards,
Anne Tarnoruder
SAP NetWeaver Product Management

SAP connector and Jsp page

hi Experts,
Can anyone please send me a working example project for SAP connector and Jsp page at [email protected]
Regards,
Sanjyoti.

Hi,
Use this example
import com.sapportals.connector.ConnectorException;
import com.sapportals.connector.connection.IConnection;
import com.sapportals.connector.execution.objects.INativeQuery;
import com.sapportals.connector.execution.objects.InvalidQueryStringException;
import com.sapportals.connector.execution.objects.QueryExecutionException;
import com.sapportals.connector.metadata.CapabilityNotSupportedException;
import com.sapportals.portal.ivs.cg.ConnectionProperties;
import com.sapportals.portal.ivs.cg.IConnectorGatewayService;
import com.sapportals.portal.ivs.cg.IConnectorService;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.resource.ResourceException;
import com.sapportals.portal.prt.runtime.PortalRuntime;
public class TestJDBC extends AbstractPortalComponent
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
throws ResourceException
// Open a connection
IConnectorGatewayService cgService = (IConnectorGatewayService)
PortalRuntime.getRuntimeResources().getService(IConnectorService.KEY);
ConnectionProperties prop = new ConnectionProperties(request.getLocale(),
request.getUser());
IConnection client = null;
try {
client = cgService.getConnection("System1", prop);
} catch (Exception e) {
response.write(e.toString());
return;
try {
// Issue SQL Query statement
INativeQuery query = client.newNativeQuery();
String queryStr = "SELECT [CategoryID], [CategoryName], [Description] FROM
[Categories]";
//IQuery query = client.newQuery();
//query.execute(queryStr);
Object result = query.execute(queryStr);
//ResultSet singleResult = ((ResultSet) result).getRow();
//IRecordSet result = query.retrieveRecordSet();
// Iterate returned result
ResultSetMetaData recordMetaData = ((ResultSet)result).getMetaData();
int colNum = recordMetaData.getColumnCount();
//result.beforeFirst();
while (((ResultSet)result).next()) {
for (int i = 1; i <= colNum; i++) {
response.write(((ResultSet)result).getString(i) + " ");
// Close the connection
client.close();
} catch (QueryExecutionException e) {
response.write(e.toString());
} catch (CapabilityNotSupportedException e) {
response.write(e.toString());
} catch (ConnectorException e) {
response.write(e.toString());
} catch (InvalidQueryStringException e) {
response.write(e.toString());
} catch (ResourceException e) {
response.write(e.toString());
} catch (SQLException e){
response.write(e.toString());
}catch(Exception e){
response.write(e.toString());

Problem using SAP Connector in Win 2k3 x64 - No Data is returned on BAPIs

Hi,
During the tests of migration to a 64 bits environment we encountered some problems with the connection to the SAP server.
The first problem was that the librfc32.dll library was a 32 bit library, so application could not run in x64 mode.
We downloaded the official x64 library from the Support Portal (https://websmp206.sap-ag.de/support > Downloads >
Support Packages and Patches > Entry by Application Group > Additional Components > SAP Kernel > SAP KERNEL 64-BIT > SAP KERNEL 6.40 64-BIT >
SAP KERNEL 6.40 64-BIT > Windows Server on x64 64bit > #Database independent > librfc_66-20001176.sar, and extracting file librfc32.dll a x64 dll).
Using this x64 dll we finally could test the application in 64-bits mode (the purpose of the migration) testing its runtime behavior,
where my current problem is.
When connecting to the SAP server all BAPI's we test are always returning an empty data results.
We have no errors nor exceptions from the SAP .NET connector, only the results come empty when they shouldn't.
When testing the same application but linked to the SAP 32 bits library (application runs in 32-bit mode), invoking the same BAPI's
(using the exactly the same code and parameters) we got the correct response from the BAPI, i.e., non empty results.
We already tested a set of BAPIs and always with the same result, in x64 we got no data, in 32-bits we got the information.
Does anybody know what can be causing this misbehavior? What can we do to make application run correctly in x64 mode?
Here some additional information about the Operating System: Microsoft Windows Server 2003, Standard x64 Edition, Service Pack 2 (with all windows updates installed).
Best regards,
João Portela on behalf of Manuel Dias

Maybe your application isn´t run in x84
#Go to properties of your project ->Build -> changed platform target of "Any CPU" to "x86"
#Copy these libraries from our 32-bit environment :
*SAP.Connector.dll
*SAP.Conector.Rfc.dll
*librfc32.dll
*msvcp71.dll
*msvcr71.dll
In 64 bits environment:
1. librfc32.dll to C:WINDOWSsystem
2. msvcp71.dll to C:WINDOWSsystem32
3. msvcp71.dll and msvcr71.dll to C:WINDOWSSysWOW64
4. SAP.Connector.dll and SAP.Conector.Rfc.dll to C:WINDOWSassembly (DRAG)

SAP connector info

Similar Messages

Maybe you are looking for