SAP Content Server 6.40 on 32 or 64 bit OS?

Hi all,
Can anyone tell me if SAP Content Server 6.40 on NW 2004s with MaxDB 7.6 will run on Windows 2003 64 or 32 bit? I have installed in on a x64 bit 2003 server now, but there seems to be some issues. For starters, I get the following error message when I try to run "http://<hostname>:<portno.>/ContentServer/ContentServer.dll?serverInfo" as part of the post-processing when installing SAP Content Server 6.40:
%1 is not a valid Win32 application.
Does anyone have any ideas?
Regards,
Thomas

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

Similar Messages

Installtion of SAP Content Server 6.40 on Solaris

We are planning to install the SAP Content Server 6.40 on Solaris10 release 09 on SPARC Server. I have gone through the installation guide as well.
Kindly confirm the below steps are correct, if I am not wrong.
1.     Pre-Requisities
u2022     Create Group and User.
u2022     Create file system system.
2.     Extraction of source code
u2022     sapcs:~$ gunzip < httpd-2.0.62.tar.gz | tar xvf u2013
3.     Configure APACHE Source to Solaris platform.
u2022     sapcs:~/httpd-2.0.52$ configure u2013prefix=/usr/users/sapcs u2013 --enable-mods-shared=most u2013with-mpm=prefork
u2022     Go to /conf Directory open the httpd.conf change user, group and Port.
u2022     $sapcs:~/bin$ apachectl start (start webserver)
u2022     $sapcs:~/bin$ apachectl restart
u2022     $sapcs:~/bin$ apachectl stop
u2022     Create soft link home
4.     install
u2022     sapcs:~/httpd-2.0.52$ make
u2022     sapcs:~/httpd-2.0.52$ make install
5.     Then start installation of SAP Content Server 6.40
u2022     ./sapinst (SAPinst from the Installation Master DVD)
Kindly let me know if i have missed any activities..
Regards,
Panu.

Hello,
Currently, SAP Content Server do not support on Windows 64 bit system.
Please install on 32 bit system.
SAP CONTENT SERVER 6.40 -> MAXDB -> <WINDOWS SERVER... >:
MAXDB 7.6 WINDOWS SERVER 2003/IA32 32BIT
If you are SAP customer, you will find more detailed information about
availability in the SAP Product Availability Matrix (PAM) at
http://service.sap.com/pam (This is the official source for all SAP
Netweaver-related availability information.)
http://service.sap.com/pam -> SAP NETWEAVER -> SAP NETWEAVER 20004S
-> Database Platforms -> Content Server -> MAXDB -> <WINDOWS SERVER... >
< See the SAP note 919225 for Windows IA32 system requirements.>
Thank you and best regards, Natalia Khlopina

Open/edit documents on SAP Content Server from BW?

Hi guys
I have been asked to investigate whether this scenario is possible.
Today we have a SAP Content Server where we save attachments to different kinds of objects. An example could be that we open appropriation request 'S-00123' from IMA11 and attach two different MS Word documents.
In BW I have created several reports that contain these appropriation requests and we would like to be able to attach/edit the files on the content server from the BW report.
Is this somehow possible using RRI or some other functionality?
Might it even be possible by using GoTo --> Documents with the appropriate setup?
BR
Stefan

Hello Friends,
Any luck??
Thank you,
Nikee

Error while starting SAP Content server

Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
Aditya

Hi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS

Http error 405 method not allowed sap content server windows

Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

Https access to Sap Content Server 620 with R/3 46C

We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
=      using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
=    provides this ordered list of 9 ciphersuites:
=       1. SSL_RSA_WITH_RC4_128_SHA
=       2. SSL_RSA_WITH_RC4_128_MD5
=       3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
=       4. SSL_RSA_WITH_DES_CBC_SHA
=       5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
=       6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
=       7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
=       8. SSL_RSA_WITH_NULL_SHA
=       9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c       774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c       777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards

Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.

Sap Content server Direct Browser Access - docGet

We use SAP Content Server for DMS doc storage. Docs are stored without digital signing.
I am looking to access dms original files directly via web browser using the "docGet" command.
My url looks as shown:
http://pswdf009:1080/ContentServer/ContentServer.dll?docGet&pVersion=0045&contRep=K1&docId=361A524A3ECB5459E0000800099245EC
When I call the url, browser does not seem to be able to read the file type of the server response. An "open/save" dialog appears and when "open" is selected a subsequent dialog appears asking which application to use to open the file. Once the correct application is chosen, the document is displayed correctly.
Is there some way to instruct the browser the content-type is application/pdf?
Will CSAdmin parameter changes have any impact?
The browser is Internet Explorer 6.
Any help is appreciated.
Roger

Hi Roger,
you may of course find an answer here.
But mySAP PLM DMS is not a focus topic here (besides maybe connecting it into the SAP Portal and KM). Thus, you may be better off using a contact or a message to PLM.
Regards, Karsten

SAP Content Server Configuration (CSADMIN) error in connection

Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1.      SQL Server;     %WINDIR%\system32\SQLSRV32.dll
2.      SAP MaxDB SDB (Unicode);        C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3.      SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
      C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
     C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
Thanks

HI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu.

Moving SAP Content Server/MaxDB 7.6 to a Windows 2008 R2 Server

Hi All.
We are in the process of upgrading our server where the SAP content server is located. We are going from SAP CS 6.30/MaxDB 7.6 to a Windows 2008 R2 server where we want to install SAP CS 6.40/MaxDB 7.8. I have been following the latest manual from SAP for upgrading to MaxDb 7.8 (2010-10-05) from MaxDb 7.6 using the in-place method.
To date we have installed MaxDB 7.6 on the server. We restored our latest backup and performed the index checks as spelled out in the manual. I have the database in ADMIN mode and went to run the MaxDb 7.8 install for the 64 bit window version. THe install GUI comes up, but the Update selection is grayed out. This tells me that the install program can not detect our existing database. I did make sure I was running the install as Admim so I do not think that is the issue.
This is the second time I have tried this upgrade. The first time I did a comand line upgrade by runing the .bat file DBUPDATE.bat. We have a 110 Gbyte database and this upgrade ran in about 15 minutes, and of course when I went to openthe database it was toast. Do not want to make the same mistake again.
One other point, since we did a restore of the database, then the index check, we did not run a backup as the manual suggested as we felt it was not necessary. Does the system require a backup before upgrade and that is why it does not see the database?
Any assistance will be greatly appreciated.

I beleive we have resolved the issue with upgrading the database, but now we are having a problem with Datbase Studio 7.8. Before the upgrade we used Data Manager 7.6. After the upgrade we installed Database Studio 7.8 and when we go to start it up, we are getting the Problems opening perspective 'com.sap.sdb.tools.ut.perspectives.mainPerspective'. I followed the instruction in another post Problems opening perspective in Database Studio, but we still are getting the error.
Can anybody offer any assistance as we are getting close to the weekend when we want to do the cutover and we are not even done with our first pass at upgrading the SAP content server.
Thanks
John

SAP Content Server 6.40 on Windows 2003, IIS 6, filesystem storage

Hello:
We have installed SAP Content Sever 6.40 on Windows Server 2003, IIS 6, and using the filesystem as storage, not SAPDB.
The installation goes without any issues and completes successfully, but the test URL http://<host>:<port>/ContentServer/ContentServer.dll?serverInfo returns "The page cannot be displayed" and not the expected system info/status. We need to fix this before moving on to config in ERP, any suggestions into Content Server or IIS settings/configuration is appreciated.
We're using the standard install port 1090, and testing from a browser in the same host.
Regards,
Eduardo

Additional information:
Looking in the event viewer under application, I see the following 2 errors:
1) The HTTP Filter DLL D:\Program Files\SAP\Content Server\ContentServer.dll failed to load. The data is the error.
Data: 0000: 0000007f
2) Could not load all ISAPI filters for site/service. Therefore startup aborted.
Regards,
Eduardo

Error while starting Apache WebServer in SAP Content server from sapcs user

Dear Consultants,
We are facing a Issue while staring Apache Server from SAPCS user
We have installed SAP Content server 6.4 with SAP MAX DB 7.6 on RHEL
Linux 64 bit OS, we also installed Apache web server server following SAP
Standard Installation guide,
When We run Apache server using sapcs user we are facing a error
Error (1) -
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Error (2) - same issue we get when we use httpd script to start apache
service.
[sapcs@hpsebdev1 bin]$ httpd -k start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Please Help regarding the issue
Regards
Gagan Sharma
SAP BASIS Consultant

Hello Gaghan,
From the error it seems that port 80 is being already used. Did you install the second Apache under a different user?
Can you please try using another port?
Regards,
Blanca

Document Migration from CRM to SAP Content Server

We are going live with SAP CRM 7.0 next week. CRM team configured some of applications like ITSM, Change Request Management and Transport Request database also as part of implementation.
We got last minute requirement that CRM team would like to go-live with current configuration with current configuration and eventually they would like to migrate all documents to Content server.
We do not have content server in place yet and planning to implement sometime in Feb. I am trying to explore ways how we can export existing documents created in CRM and migrate to Content server and link it.
Any ideas/Suggestions?
Thanks,
Miral.

In which repository are the documents currently stored in CRM? Please see if Note 688241 on 'Relocating large SAP Content Server Repositories' could be of any assistance to you.
Regards,
Pradeepkumar Haragoldavar

Creating documents with SCMS_DOC_URL_CREATE in SAP Content Server

Hi there,
I have a Problem here with the Knowledge Provider concerning SCMS_DOC_URL_CREATE and hope anyone could help me out.
For a SAP Records Management document I am calling BAPI_SRM_DOC_CREATE and get a LOIO and a PHIO ID for my new document. The PHIO-ID I pass to SCMS_DOC_URL_CREATE which then creates the URL to put the file on a SAP Content Server with a 3rd party tool. That works totally fine and I can see the file on the Content Server with its metadata,
Unfortunately SAP Records Management doesn't recognize that a file has been uploaded. When I open the file in the transaction ORGANIZER it has no content and no components.
Is there any function call I am missing to tell the Records Management document that I have uploaded something?
All is working fine when I get the uploaded content into NetWeaver with SCMS_GET... and call BAPI_SRM_CHECKIN_DOCUMENT. But of course this is not what I want (transferring the file directly in the local network area where the content server stands, then getting it back to NetWeaver and back again to the content server).
Any help would really be appreciated.
Thank you
Marcus

Answer: because SCMS_DOC_URL_CREATE is not remote enabled by default.

Delay viewing archivelink images held in SAP content server

Hi,
We have implemented an indexing solution utilising SAP Archivelink and Content server. We are noting considerable delays when viewing documents, this only happens for the first document in a transaction and can take up to 6 minutes to display a document. As our users have a person on the telephone at the time this results in alot of smalltalk which is not desireable.
Does anyone know of any performance issues related to document storage in content server?
Many Thanks,
Pete White

hi,
The SAP Content Server is the server at the core of SAPu2019s document storage and management concept. It provides the technical infrastructure for all document-centric applications and business scenarios that do not require long-term document archivingu201D
SAP Integration points
SAP Document Management system (DMS), and SAP Knowledge Warehouse.
U could achieve your requirement easily
SAP Content Server u2013 Features
Ability to create file system and database repositories.
Support for security certificates (secure key).
Ability to lock down the files on the content repositories.
Images can be displayed using the ECL viewer or desktop applications via Internet Explore.
Benakaraj
??P

Storing of MSDS in SAP Content Server - Part2

Hi Friends,
I already raised this issue in link given below.
Storing of MSDS in SAP Content Server
Ealier I did not tried this as we did not received the hardaware,
Now I did configuration as per the note " 1408009 - Settings for EH&S Product Safety documents" for SAP EHS document Type.
But when I try to generate report, its giving me error as given below.
Check Document Type SBR
Internal error in function C14SX_DOCUMENT_ORIGINAL_PUT (exception 0)
Saving document data has failed
Error while checking in and storing: report.rtf
Can you guys help me if any more configurations are needed or am I missing something. The content Server is of OpenText and not SAP Content Server.
Thanks.
With Warm Regards
Mangesh Pande

HI Mangesh,
Try to figure out if it is only DMS related - or if it is something wrong with the EH&S part of the setup:
Create an SBR Document manually via CV01n.
If this fails - at least the DMS Setup is wrong.
If this works - DMS settings should be fine and the problem is on EH&S side.
Check the Application log for errors as well - there might be more details in there.
Greets
Mark

SAP Content Server 6.40 on 32 or 64 bit OS?

Similar Messages

Maybe you are looking for