SAP Content Server logs

Hi..
SAP Content Server 6.40 on Solaris 10, Apache 1.3. xx installed successfully. i unable to connect from ECC to SAP Content server gives error in error_logs of app ache
[Mon Sep 6 14:46:55 2010] [error] [client 172.16.20.219] File does not exist: /usr/sap/XXX/apache/htdocs//ContentServer/ContentServer.dll
It really great full, If you can help.
Regards,
Panu
Edited by: kumar panu on Sep 6, 2010 2:02 PM

Hi Ravindra,
We have created repository in OAC0 but when we connect going to connect through the CSADMIN unable to connect to SAP Content Server.
Can you please confirm the script is correct for Solaris Sytem?
HTTP SCRIPT: /ContentServer/ContentServer.dll
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 7:36 AM

Similar Messages

Error while starting Apache WebServer in SAP Content server from sapcs user

Dear Consultants,
We are facing a Issue while staring Apache Server from SAPCS user
We have installed SAP Content server 6.4 with SAP MAX DB 7.6 on RHEL
Linux 64 bit OS, we also installed Apache web server server following SAP
Standard Installation guide,
When We run Apache server using sapcs user we are facing a error
Error (1) -
[sapcs@hpsebdev1 bin]$ apachectl start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Error (2) - same issue we get when we use httpd script to start apache
service.
[sapcs@hpsebdev1 bin]$ httpd -k start
(13)Permission denied: make_sock: could not bind to address [::]:80
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Please Help regarding the issue
Regards
Gagan Sharma
SAP BASIS Consultant

Hello Gaghan,
From the error it seems that port 80 is being already used. Did you install the second Apache under a different user?
Can you please try using another port?
Regards,
Blanca

Storing of MSDS in SAP Content Server - Part2

Hi Friends,
I already raised this issue in link given below.
Storing of MSDS in SAP Content Server
Ealier I did not tried this as we did not received the hardaware,
Now I did configuration as per the note " 1408009 - Settings for EH&S Product Safety documents" for SAP EHS document Type.
But when I try to generate report, its giving me error as given below.
Check Document Type SBR
Internal error in function C14SX_DOCUMENT_ORIGINAL_PUT (exception 0)
Saving document data has failed
Error while checking in and storing: report.rtf
Can you guys help me if any more configurations are needed or am I missing something. The content Server is of OpenText and not SAP Content Server.
Thanks.
With Warm Regards
Mangesh Pande

HI Mangesh,
Try to figure out if it is only DMS related - or if it is something wrong with the EH&S part of the setup:
Create an SBR Document manually via CV01n.
If this fails - at least the DMS Setup is wrong.
If this works - DMS settings should be fine and the problem is on EH&S side.
Check the Application log for errors as well - there might be more details in there.
Greets
Mark

Apache start error on SAP Content server 6.40

Hi all
I installed a SAP Content Server 6.4 successfully in Solaris 10 with MaxDB 7.6.
Although Installation is finished completely I got an syxtext error when apache web server is started after completing installation as below;
dmscs/bin>./apachectl start
Cannot load /usr/sap/XXD/apache/libexec/mod_sapcs.so into server: ld.so.1: httpd: fatal:sap/Apache/libexec/mod_sapcs.so: wrong ELF class: ELFCLASS64
./apachectl start: httpd could not be started
let me know to solution if you had experienced with the same problem.

Hi Nelis,
We did the module registration after after installation, Please find the below of httpd.conf.
=======================================================================================
Example:
LoadModule foo_module libexec/mod_foo.so
LoadModule sapcs_module libexec/mod_sapcs.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module         libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module        libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module      libexec/mod_status.so
LoadModule info_module        libexec/mod_info.so
LoadModule includes_module    libexec/mod_include.so
LoadModule autoindex_module   libexec/mod_autoindex.so
LoadModule dir_module         libexec/mod_dir.so
LoadModule cgi_module         libexec/mod_cgi.so
LoadModule asis_module        libexec/mod_asis.so
LoadModule imap_module        libexec/mod_imap.so
LoadModule action_module      libexec/mod_actions.so
LoadModule speling_module     libexec/mod_speling.so
LoadModule userdir_module     libexec/mod_userdir.so
LoadModule alias_module       libexec/mod_alias.so
LoadModule rewrite_module     libexec/mod_rewrite.so
LoadModule access_module      libexec/mod_access.so
LoadModule auth_module        libexec/mod_auth.so
LoadModule anon_auth_module   libexec/mod_auth_anon.so
LoadModule dbm_auth_module    libexec/mod_auth_dbm.so
LoadModule digest_module      libexec/mod_digest.so
LoadModule proxy_module       libexec/libproxy.so
LoadModule cern_meta_module   libexec/mod_cern_meta.so
LoadModule expires_module     libexec/mod_expires.so
LoadModule headers_module     libexec/mod_headers.so
LoadModule usertrack_module   libexec/mod_usertrack.so
LoadModule log_forensic_module libexec/mod_log_forensic.so
LoadModule unique_id_module   libexec/mod_unique_id.so
LoadModule setenvif_module    libexec/mod_setenvif.so
Reconstruction of the complete module list from all available modules
(static and shared ones) to achieve correct module execution order.
[WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_sapcs.cpp
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_log_forensic.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
Can you guide me where exactly point to the correct location for /ContentServer/ContentServer.dll in httpd.conf.
=========================================================================
#<VirtualHost *:80>
   DocumentRoot /www/docs/dummy-host.example.com
   ServerName dummy-host.example.com
   ErrorLog logs/dummy-host.example.com-error_log
   CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /export/home/sapcs1/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 9:05 AM
Edited by: kumar panu on Sep 7, 2010 9:07 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM
Edited by: kumar panu on Sep 7, 2010 9:08 AM

SAP Content Server error

Hello colleagues,
I have this error when start the Content Server,
host:(/directory/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /directory/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into
server: /directory/apache/modules/mod_sapcs22.so: undefined symbol: ap_log_error
Can you help me?
Thanks

Hi Reagan,
Execute the first parameter,
rgqaserp:(/sapcontreps/apache/modules)(root)#cat /sapcontreps/apache/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/sapcontreps/apache"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 1090
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule sapcs_module modules/mod_sapcs22.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
    AllowOverride none
    Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/sapcontreps/apache/htdocs"
<Directory "/sapcontreps/apache/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
    Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/sapcontreps/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
</IfModule>
# "/sapcontreps/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/sapcontreps/apache/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
<IfModule mod_sapcs.cpp>
AddModuleInfo ContentServer "SAP Content Server 640/0 (Prototype) (C) SAP AG 1998, 2001"
CSConfigPath /sapcontreps/conf/cs.conf
<Location /sapcs>
SetHandler sapcs_module
Allow from all
</Location>
<Location /ContentServer/ContentServer.dll>
SetHandler sapcs_module
Allow from all
</Location>
<Location /contentserver/contentserver.dll>
SetHandler sapcs_module
Allow from all
</Location>
</IfModule>
Second parameter,
rgdeverp:(/sapcontreps/apache/modules)(root)#ls -la /sapcontreps/apache/modules
total 5544
drwxrwxrwx 2 sapcs sapsys   4096 Jun 12 15:46 .
drwxrwxrwx 15 sapcs sapsys   4096 Jun 12 14:56 ..
-rwxrwxrwx 1 sapcs sapsys 13836 Jun 12 14:54 httpd.exp
lrwxrwxrwx 1 sapcs sapsys     34 Jun 12 15:46 libsapsecu.so -> /sapcontreps/modules/libsapsecu.so
-rwxrwxrwx 1 sapcs sapsys 34756 Jun 12 14:56 mod_access_compat.so
-rwxrwxrwx 1 sapcs sapsys 31861 Jun 12 14:56 mod_actions.so
-rwxrwxrwx 1 sapcs sapsys 44418 Jun 12 14:56 mod_alias.so
-rwxrwxrwx 1 sapcs sapsys 30426 Jun 12 14:56 mod_allowmethods.so
-rwxrwxrwx 1 sapcs sapsys 41605 Jun 12 14:56 mod_auth_basic.so
-rwxrwxrwx 1 sapcs sapsys 84126 Jun 12 14:56 mod_auth_digest.so
-rwxrwxrwx 1 sapcs sapsys 68399 Jun 12 14:56 mod_auth_form.so
-rwxrwxrwx 1 sapcs sapsys 30531 Jun 12 14:56 mod_authn_anon.so
-rwxrwxrwx 1 sapcs sapsys 36079 Jun 12 14:56 mod_authn_core.so
-rwxrwxrwx 1 sapcs sapsys 40100 Jun 12 14:56 mod_authn_dbd.so
-rwxrwxrwx 1 sapcs sapsys 32532 Jun 12 14:56 mod_authn_dbm.so
-rwxrwxrwx 1 sapcs sapsys 32359 Jun 12 14:56 mod_authn_file.so
-rwxrwxrwx 1 sapcs sapsys 49757 Jun 12 14:56 mod_authn_socache.so
-rwxrwxrwx 1 sapcs sapsys 61854 Jun 12 14:56 mod_authz_core.so
-rwxrwxrwx 1 sapcs sapsys 42581 Jun 12 14:56 mod_authz_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35071 Jun 12 14:56 mod_authz_dbm.so
-rwxrwxrwx 1 sapcs sapsys 34704 Jun 12 14:56 mod_authz_groupfile.so
-rwxrwxrwx 1 sapcs sapsys 35256 Jun 12 14:56 mod_authz_host.so
-rwxrwxrwx 1 sapcs sapsys 30435 Jun 12 14:56 mod_authz_owner.so
-rwxrwxrwx 1 sapcs sapsys 30802 Jun 12 14:56 mod_authz_user.so
-rwxrwxrwx 1 sapcs sapsys 105072 Jun 12 14:56 mod_autoindex.so
-rwxrwxrwx 1 sapcs sapsys 34253 Jun 12 14:56 mod_buffer.so
-rwxrwxrwx 1 sapcs sapsys 192292 Jun 12 14:56 mod_cache.so
-rwxrwxrwx 1 sapcs sapsys 84567 Jun 12 14:56 mod_cache_disk.so
-rwxrwxrwx 1 sapcs sapsys 88616 Jun 12 14:56 mod_cache_socache.so
-rwxrwxrwx 1 sapcs sapsys 98717 Jun 12 14:56 mod_cgid.so
-rwxrwxrwx 1 sapcs sapsys 354271 Jun 12 14:56 mod_dav.so
-rwxrwxrwx 1 sapcs sapsys 189761 Jun 12 14:56 mod_dav_fs.so
-rwxrwxrwx 1 sapcs sapsys 59275 Jun 12 14:56 mod_dbd.so
-rwxrwxrwx 1 sapcs sapsys 35504 Jun 12 14:56 mod_dir.so
-rwxrwxrwx 1 sapcs sapsys 33559 Jun 12 14:56 mod_dumpio.so
-rwxrwxrwx 1 sapcs sapsys 31544 Jun 12 14:56 mod_env.so
-rwxrwxrwx 1 sapcs sapsys 40037 Jun 12 14:56 mod_expires.so
-rwxrwxrwx 1 sapcs sapsys 63988 Jun 12 14:56 mod_ext_filter.so
-rwxrwxrwx 1 sapcs sapsys 39211 Jun 12 14:56 mod_file_cache.so
-rwxrwxrwx 1 sapcs sapsys 52811 Jun 12 14:56 mod_filter.so
-rwxrwxrwx 1 sapcs sapsys 60936 Jun 12 14:56 mod_headers.so
-rwxrwxrwx 1 sapcs sapsys 158790 Jun 12 14:56 mod_include.so
-rwxrwxrwx 1 sapcs sapsys 66838 Jun 12 14:56 mod_info.so
-rwxrwxrwx 1 sapcs sapsys 36196 Jun 12 14:56 mod_lbmethod_bybusyness.so
-rwxrwxrwx 1 sapcs sapsys 36188 Jun 12 14:56 mod_lbmethod_byrequests.so
-rwxrwxrwx 1 sapcs sapsys 36192 Jun 12 14:56 mod_lbmethod_bytraffic.so
-rwxrwxrwx 1 sapcs sapsys 48496 Jun 12 14:56 mod_lbmethod_heartbeat.so
-rwxrwxrwx 1 sapcs sapsys 86665 Jun 12 14:56 mod_log_config.so
-rwxrwxrwx 1 sapcs sapsys 40163 Jun 12 14:56 mod_log_debug.so
-rwxrwxrwx 1 sapcs sapsys 31797 Jun 12 14:56 mod_logio.so
-rwxrwxrwx 1 sapcs sapsys 48254 Jun 12 14:56 mod_macro.so
-rwxrwxrwx 1 sapcs sapsys 54195 Jun 12 14:56 mod_mime.so
-rwxrwxrwx 1 sapcs sapsys 106526 Jun 12 14:56 mod_negotiation.so
-rwxrwxrwx 1 sapcs sapsys 291551 Jun 12 14:56 mod_proxy.so
-rwxrwxrwx 1 sapcs sapsys 171766 Jun 12 14:56 mod_proxy_ajp.so
-rwxrwxrwx 1 sapcs sapsys 108144 Jun 12 14:56 mod_proxy_balancer.so
-rwxrwxrwx 1 sapcs sapsys 54249 Jun 12 14:56 mod_proxy_connect.so
-rwxrwxrwx 1 sapcs sapsys 38536 Jun 12 14:56 mod_proxy_express.so
-rwxrwxrwx 1 sapcs sapsys 61607 Jun 12 14:56 mod_proxy_fcgi.so
-rwxrwxrwx 1 sapcs sapsys 112538 Jun 12 14:56 mod_proxy_ftp.so
-rwxrwxrwx 1 sapcs sapsys 114424 Jun 12 14:56 mod_proxy_http.so
-rwxrwxrwx 1 sapcs sapsys 56400 Jun 12 14:56 mod_proxy_scgi.so
-rwxrwxrwx 1 sapcs sapsys 55514 Jun 12 14:56 mod_proxy_wstunnel.so
-rwxrwxrwx 1 sapcs sapsys 32760 Jun 12 14:56 mod_ratelimit.so
-rwxrwxrwx 1 sapcs sapsys 40376 Jun 12 14:56 mod_remoteip.so
-rwxrwxrwx 1 sapcs sapsys 45091 Jun 12 14:56 mod_reqtimeout.so
-rwxrwxrwx 1 sapcs sapsys 37224 Jun 12 14:56 mod_request.so
-rwxrwxrwx 1 sapcs sapsys 171049 Jun 12 14:56 mod_rewrite.so
lrwxrwxrwx 1 sapcs sapsys     35 Jun 12 15:46 mod_sapcs22.so -> /sapcontreps/modules/mod_sapcs22.so
-rwxrwxrwx 1 sapcs sapsys 119242 Jun 12 14:56 mod_sed.so
-rwxrwxrwx 1 sapcs sapsys 57944 Jun 12 14:56 mod_session.so
-rwxrwxrwx 1 sapcs sapsys 32806 Jun 12 14:56 mod_session_cookie.so
-rwxrwxrwx 1 sapcs sapsys 47023 Jun 12 14:56 mod_session_dbd.so
-rwxrwxrwx 1 sapcs sapsys 44102 Jun 12 14:56 mod_setenvif.so
-rwxrwxrwx 1 sapcs sapsys 53976 Jun 12 14:56 mod_slotmem_shm.so
-rwxrwxrwx 1 sapcs sapsys 45214 Jun 12 14:56 mod_socache_dbm.so
-rwxrwxrwx 1 sapcs sapsys 35686 Jun 12 14:56 mod_socache_memcache.so
-rwxrwxrwx 1 sapcs sapsys 68519 Jun 12 14:56 mod_socache_shmcb.so
-rwxrwxrwx 1 sapcs sapsys 39669 Jun 12 14:56 mod_speling.so
-rwxrwxrwx 1 sapcs sapsys 63924 Jun 12 14:56 mod_status.so
-rwxrwxrwx 1 sapcs sapsys 43320 Jun 12 14:56 mod_substitute.so
-rwxrwxrwx 1 sapcs sapsys 33237 Jun 12 14:56 mod_unique_id.so
-rwxrwxrwx 1 sapcs sapsys 33466 Jun 12 14:56 mod_unixd.so
-rwxrwxrwx 1 sapcs sapsys 33615 Jun 12 14:56 mod_userdir.so
-rwxrwxrwx 1 sapcs sapsys 25961 Jun 12 14:56 mod_version.so
-rwxrwxrwx 1 sapcs sapsys 37707 Jun 12 14:56 mod_vhost_alias.so
But when stop or stat I have the error,
rgqaserp:(/sapcontreps/apache/bin)(root)#./apachectl start
httpd: Syntax error on line 66 of /sapcontreps/apache/conf/httpd.conf: Cannot load modules/mod_sapcs22.so into server: /sapcontreps/apache/modules/mod_sapcs22.so: ELF file data encoding not little-endian
Can you help me?
Thanks

Archiving to SAP Content Server/MaxDB: TCP/IP errors when deleting in paral

Dear experts.
We are struggling to get the optimal setup for archiving to SAP Content Server using MaxDB. After running one or more archiving jobs for a few hours we suddenly loose connection to the Content Server, and we need to restart the content server before continueing. We long thought it was the logspace which was running full, but this was eliminated. Now it seems as the error occurs when 4 or more deletions jobs is running in parallel. (Write->Store->Delete).
The run-times on a typical archiving job for about 3 GB data would be W: 3000sec S:40sec D: 12000sec. In general the delete job takes about 3 times the write-job.
Everything seems fine until one suddenly get the TCP/IP error after some heavy archiving jobs.
Have anyone experienced anything like this, and are there any good ideas on how to avoid this?
Thank you very much for your inputs on this.

We were running 3 parallell delete jobs yesterday, and it all went fine until I started the 4th job, then all jobs stopped immediately. The KNLDIAG file at the exact time of the problem looks like this:
2008-10-08 22:57:48      0x918     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0025', UKT:8
2008-10-08 22:57:48      0x918     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0003', UKT:8
2008-10-08 23:31:14      0x918     19637 CONNECT 'vreceive', COMMAND TIMEOUT, T74
2008-10-08 23:31:14      0x914     19637 CONNECT 'vreceive', COMMAND TIMEOUT, T72
2008-10-08 23:31:14      0x918     19651 CONNECT Connection released, T74
2008-10-08 23:31:14      0x914     19651 CONNECT Connection released, T72
This morning I just ran another test with 2 jobs which also failed, and the two job logs contains:
09.10.2008 07:06:41 Archive file 000851-001EC_PCA_ITM is being verified
09.10.2008 07:16:54 Archive file 000851-001EC_PCA_ITM is being processed
09.10.2008 07:16:55 Starting deleting data
09.10.2008 07:36:28 Connection to http://192.1.4.5:1090/ContentServer/ContentServer.: TCP/IP error
and
09.10.2008 07:13:30 Archive file 000851-010EC_PCA_ITM is being verified
09.10.2008 07:20:55 Archive file 000851-010EC_PCA_ITM is being processed
09.10.2008 07:20:56 Sletting av data begynner .
09.10.2008 07:39:28 Connection to http://192.1.4.5:1090/ContentServer/ContentServer.: Time limit exceeded
and the KNLDIAG file looked like this:
2008-10-09 07:11:34      0x914     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0016', UKT:7
2008-10-09 07:11:34      0x914     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0023', UKT:7
2008-10-09 07:11:35      0x90C     53040 SAVPOINT (3) Stop Conv I/O Pages 2119 IO 265
2008-10-09 07:11:35      0x90C     53071 SAVPOINT B20SVP_COMPLETED: 689
2008-10-09 07:12:26      0x918     19633 CONNECT Connect req. (T74, Node:'', PID:4272)
2008-10-09 07:12:26      0x918     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0001', UKT:8
2008-10-09 07:12:26      0x918     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0015', UKT:8
2008-10-09 07:12:26      0x918     19617 DEVIO    Single I/O attach, 'D:\sapdb\SDB\sapdata\DISKD0004', UKT:8
2008-10-09 07:12:26      0x918     19651 CONNECT Connection released, T74
2008-10-09 07:12:35      0x918     19633 CONNECT Connect req. (T74, Node:'', PID:4272)
2008-10-09 07:12:35      0x918     19651 CONNECT Connection released, T74
2008-10-09 07:12:46      0x918     19633 CONNECT Connect req. (T74, Node:'', PID:4272)
2008-10-09 07:12:47      0x918     19651 CONNECT Connection released, T74
2008-10-09 07:31:47      0x914     19637 CONNECT 'vreceive', COMMAND TIMEOUT, T72
2008-10-09 07:31:47      0x914     19651 CONNECT Connection released, T72
2008-10-09 07:47:20      0x914     19633 CONNECT Connect req. (T72, Node:'', PID:4272)
2008-10-09 07:47:20      0x914     19651 CONNECT Connection released, T72
2008-10-09 07:49:01      0x914     19633 CONNECT Connect req. (T72, Node:'', PID:4272)
2008-10-09 07:49:01      0x914     19651 CONNECT Connection released, T72
2008-10-09 07:49:27      0x910     19637 CONNECT 'vreceive', COMMAND TIMEOUT, T70
2008-10-09 07:49:27      0x910     19651 CONNECT Connection released, T70
We have not yet looked at the tips regarding the windows errors, but will do that when we get the possibilty. In the mean time; do you read anything from this above? It looks like when several jobs are crashing at the same time there is one which has the "Time limit exceeded" and the rest TCP/IP error.
Could it possibly be the MAXUSERSESSIONS parameter, or are you still leaning towards something outside the database?

View contents of SAP Content Server

Hi all,
We have successfully installed and configured SAP Content Server - the storage system is database. From a separate test system, we use archivelink to send an image to the content server. As per the logs, the image was successfully sent to the content server. Is there any method we can use to check whether the image is indeed stored on the content server? We use Database Studio to do administration on the MaxDB database of the content server but it does not provide any facility for viewing the contents. Please suggest how can the image or any other data be viewed.
regards.

Hi Gagan,
Thanks for your reply. Your suggestion will indeed confirm whether the image is present on the content server or not. However, I want to know whether there's some way we can 'see' the image on the content server. I downloaded another tool called SQL Studio. There you can browse the tables/indexes/synonyms, run queries etc but I'm not able to know which are the relevant tables I need to look into. There should be a table that must be keeping the image or at least a record concerning the image.
Any other suggestion.....
regards

Open/edit documents on SAP Content Server from BW?

Hi guys
I have been asked to investigate whether this scenario is possible.
Today we have a SAP Content Server where we save attachments to different kinds of objects. An example could be that we open appropriation request 'S-00123' from IMA11 and attach two different MS Word documents.
In BW I have created several reports that contain these appropriation requests and we would like to be able to attach/edit the files on the content server from the BW report.
Is this somehow possible using RRI or some other functionality?
Might it even be possible by using GoTo --> Documents with the appropriate setup?
BR
Stefan

Hello Friends,
Any luck??
Thank you,
Nikee

Error while starting SAP Content server

Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
Aditya

Hi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS

Http error 405 method not allowed sap content server windows

Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

Https access to Sap Content Server 620 with R/3 46C

We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
=      using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
=    provides this ordered list of 9 ciphersuites:
=       1. SSL_RSA_WITH_RC4_128_SHA
=       2. SSL_RSA_WITH_RC4_128_MD5
=       3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
=       4. SSL_RSA_WITH_DES_CBC_SHA
=       5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
=       6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
=       7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
=       8. SSL_RSA_WITH_NULL_SHA
=       9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c       774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c       777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
Regards

Caro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau.

Sap Content server Direct Browser Access - docGet

We use SAP Content Server for DMS doc storage. Docs are stored without digital signing.
I am looking to access dms original files directly via web browser using the "docGet" command.
My url looks as shown:
http://pswdf009:1080/ContentServer/ContentServer.dll?docGet&pVersion=0045&contRep=K1&docId=361A524A3ECB5459E0000800099245EC
When I call the url, browser does not seem to be able to read the file type of the server response. An "open/save" dialog appears and when "open" is selected a subsequent dialog appears asking which application to use to open the file. Once the correct application is chosen, the document is displayed correctly.
Is there some way to instruct the browser the content-type is application/pdf?
Will CSAdmin parameter changes have any impact?
The browser is Internet Explorer 6.
Any help is appreciated.
Roger

Hi Roger,
you may of course find an answer here.
But mySAP PLM DMS is not a focus topic here (besides maybe connecting it into the SAP Portal and KM). Thus, you may be better off using a contact or a message to PLM.
Regards, Karsten

SAP Content Server Configuration (CSADMIN) error in connection

Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1.      SQL Server;     %WINDIR%\system32\SQLSRV32.dll
2.      SAP MaxDB SDB (Unicode);        C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3.      SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
      C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
     C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
Thanks

HI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu.

Moving SAP Content Server/MaxDB 7.6 to a Windows 2008 R2 Server

Hi All.
We are in the process of upgrading our server where the SAP content server is located. We are going from SAP CS 6.30/MaxDB 7.6 to a Windows 2008 R2 server where we want to install SAP CS 6.40/MaxDB 7.8. I have been following the latest manual from SAP for upgrading to MaxDb 7.8 (2010-10-05) from MaxDb 7.6 using the in-place method.
To date we have installed MaxDB 7.6 on the server. We restored our latest backup and performed the index checks as spelled out in the manual. I have the database in ADMIN mode and went to run the MaxDb 7.8 install for the 64 bit window version. THe install GUI comes up, but the Update selection is grayed out. This tells me that the install program can not detect our existing database. I did make sure I was running the install as Admim so I do not think that is the issue.
This is the second time I have tried this upgrade. The first time I did a comand line upgrade by runing the .bat file DBUPDATE.bat. We have a 110 Gbyte database and this upgrade ran in about 15 minutes, and of course when I went to openthe database it was toast. Do not want to make the same mistake again.
One other point, since we did a restore of the database, then the index check, we did not run a backup as the manual suggested as we felt it was not necessary. Does the system require a backup before upgrade and that is why it does not see the database?
Any assistance will be greatly appreciated.

I beleive we have resolved the issue with upgrading the database, but now we are having a problem with Datbase Studio 7.8. Before the upgrade we used Data Manager 7.6. After the upgrade we installed Database Studio 7.8 and when we go to start it up, we are getting the Problems opening perspective 'com.sap.sdb.tools.ut.perspectives.mainPerspective'. I followed the instruction in another post Problems opening perspective in Database Studio, but we still are getting the error.
Can anybody offer any assistance as we are getting close to the weekend when we want to do the cutover and we are not even done with our first pass at upgrading the SAP content server.
Thanks
John

SAP Content Server 6.40 on Windows 2003, IIS 6, filesystem storage

Hello:
We have installed SAP Content Sever 6.40 on Windows Server 2003, IIS 6, and using the filesystem as storage, not SAPDB.
The installation goes without any issues and completes successfully, but the test URL http://<host>:<port>/ContentServer/ContentServer.dll?serverInfo returns "The page cannot be displayed" and not the expected system info/status. We need to fix this before moving on to config in ERP, any suggestions into Content Server or IIS settings/configuration is appreciated.
We're using the standard install port 1090, and testing from a browser in the same host.
Regards,
Eduardo

Additional information:
Looking in the event viewer under application, I see the following 2 errors:
1) The HTTP Filter DLL D:\Program Files\SAP\Content Server\ContentServer.dll failed to load. The data is the error.
Data: 0000: 0000007f
2) Could not load all ISAPI filters for site/service. Therefore startup aborted.
Regards,
Eduardo

SAP Content Server logs

Similar Messages

Maybe you are looking for