SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

Similar Messages

What version of Informix do I use for QM 8.5.1 and windows 2008

I am building a Quality Manager server 8.5.1. The install document states that I should install IBM Informix Client Software Development Kit 3.0.0. I am installing QM on Windows Server 2008 so I don't think 3.0.0 is correct. From what I can see I should use version 3.50.tc6 is this correct?

I think that is a mistake. I have installed QM 8.5(1) without installing the Informix and it worked OK.
The 8.5(2) install guide does not say to install Informix.
The current informix driver is 3.70FC2 for 64 bit windows and 3.70TC1 for 32 bit windows. When Cisco install the UCCX historical reporting client that automatically installs the 3.0.0 client.
Graham

Sender Mail Adapter with SAP Conversion agent

have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweig

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

Urgent: IDOC to EDI with SAP Conversion Agent

Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
E

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

SAP Conversion Agent

Hi,
I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
2. It is a must to use the EDI message parsing templates provided in the CA library ?
3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
I have gone throught the help document. Please help me find answers for the above questions.
Thanks,
Hari

Hi SreeHari,
Please refer to the link below,which might help you.
[SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
Regards,
Madhu

SAP Conversion Agent: HL7 library project could not be executed

Hi experts
I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
"Invalid service 'TEST'. Check service name and service database"
Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
<description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
<time>N/A</time>
</Event>
</Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
Do you have any ideas?
Thx,
manuku

Hi Conversion Agent experts,
Do you have any ideas?
Thx
manuku

XI supports EDIFACT without SAP Conversion Agent and others.

Hello.
Somebody knows the best way to convert EDIFACT message using XI?
What I can do this without using softwares of conversion like:
- SAP Conversion Agent;
- Seeburger;
- BIC Mapper and others.
Thanks very much in advance.

Hi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil

How to download SAP Conversion Agent 7.1 by Informatica

Hi Gurus,
I tried to download SAP Conversion Agent 7.1 by Informatica from following location
Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
but its showing No data available. Can anybody help me how to get this conversion agent.

Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

SAP Conversion Agent Studio Preview Version

Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
Robert

Hi Conversion Agent experts,
Do you have any ideas?
Thx
manuku

SAP Conversion Agent - Performance Tuning

Hi Experts,
We are working with SAP Conversion agent..we have developed several scenarios on that...
But, Now we are worried about the performance issues on the same.
Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
-S

Hi,
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
Conversion Agent
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
Thanks,
Madhu

How to download to SAP CONVERSION AGENT

Hi,
Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
SAP Software Distribution Center
    Download
        Support Packages and Patches
            Entry by Application Group
SAP NetWeaver ->
is shows as Data unavailable.Request your help on this.
Regards,
Bhargav
Message was edited by:
        bhargav gundabolu

HI Bhargav
Try out this
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
It is working
Thanks
Abhishek Mahajan
***Please reward points if helpful**

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Best approach for publishing a paid version and an ad supported free version of the same app

Hi,
One of my Windows 8 store app is almost ready for store submission.
What is the best approach for publishing a paid version and an ad supported free version of the same app.
Can I do the following
1. Submit the app with unlimited free trial to store
2. During the free trial ads will be displayed
3. If the user purchases the app, then the ad would not displayed
Any advise is greatly
appreciated.
Best Regards

Although the in-App purchase option is good but for ad based apps my approach is different.
I would suggest putting 2 different apps in the store, one free with Ads and one without. Reason being you want the extra reference and xaml ad controls depending upon how
many you have on the paid version of the apps. I would keep my apps as lighter and cleaner as possible specially when its a paid app.
I currently manage both free and paid app through one solution and reuse most of the code except for the views.
Binoj Daniel www.CodeRewind.com

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2

Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2?
Thanks,

DES is disabled by default on 2008, could this DC be a Windows 2003? If so then this would be the expected encyption.
The following is the list of the encryption available for each Windows system
Windows 2000, XP,Windows Server 2003:
DES, RC4
         Vista
, Windows Server 2008:      DES, RC4,AES
         Windows 7 and Windows Server 2008 R2:     DES(disabled by default), RC4,AES
From:
http://blogs.msdn.com/b/openspecification/archive/2010/11/17/encryption-type-selection-in-kerberos-exchanges.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Conversion Agent for XI 7 on Linux

Dear All,
We want use conversion agent software in our XI 7 server which is on Linux. Can anybody let me know what are the majoir steps that I should do.
I have searched SDN but all the installation information are based on Windows.
Ours is a linux server and please let me know how can I install the engine on Linux server.
Warm Regards
Mazdul
[email protected],

Hi Bhavesh,
I deployed the required files through SDM.
Then in the step "Installing the Conversion Agent Software on Unix mentioned in the guide" it is mentioned
"Find the Conversion Agent setup file. The file has a name such as
Setup_uuu.bin, where uuu is the name of the Unix flavor. It is located in the
Conversion Agent subdirectory of the SAP XI repository, for example:
/usr/sap/J2E/SYS/global/Conversion Agent/Setup_linux.bin"
I found the file. Then it says to execute the *.bin file. Here I got stuck. Is it ever possible to execute a .bin file ??????? I tried several ways like changing the permissions but it did not work and I am unable to execute the file.
My question is
Is it at all required to run the .bin file?If yes how can i do it...Or is it just deploying the required sda s is good enough??
Please help.
Warm Regards
Mazdul

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Similar Messages

Maybe you are looking for