SAP Conversion Agent - Performance Tuning
Hi Experts,
We are working with SAP Conversion agent..we have developed several scenarios on that...
But, Now we are worried about the performance issues on the same.
Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
-S
Hi,
/people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
Conversion Agent
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
Thanks,
Madhu
Similar Messages
-
Sender Mail Adapter with SAP Conversion agent
have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
it seems to ignore the attchment of the e-mail
the sender configuration module tab is as follows :
1.localejbs/AF_Modules/PayloadSwapBean transform
2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
The paramters are
transform swap.keyName Content-Disposition
transform swap.keyName Content-Description
transform swap.keyValue attachment
transform swap.keyValue codeco
CM TransformationName ZIM_CODECO_VALIDATIONS
The Convesion Agnet runs prefectly when using the Conversion Agent engine
thx,Shai Rosenzweigcheck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
Urgent: IDOC to EDI with SAP Conversion Agent
Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
Echeck with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek -
Hi,
I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
2. It is a must to use the EDI message parsing templates provided in the CA library ?
3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
I have gone throught the help document. Please help me find answers for the above questions.
Thanks,
HariHi SreeHari,
Please refer to the link below,which might help you.
[SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
Regards,
Madhu -
SAP Conversion Agent Studio Preview Version
Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
RobertHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
SAP Conversion Agent: HL7 library project could not be executed
Hi experts
I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
"Invalid service 'TEST'. Check service name and service database"
Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
<description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
<time>N/A</time>
</Event>
</Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
Do you have any ideas?
Thx,
manukuHi Conversion Agent experts,
Do you have any ideas?
Thx
manuku -
XI supports EDIFACT without SAP Conversion Agent and others.
Hello.
Somebody knows the best way to convert EDIFACT message using XI?
What I can do this without using softwares of conversion like:
- SAP Conversion Agent;
- Seeburger;
- BIC Mapper and others.
Thanks very much in advance.Hi,
See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
Here is the link for your reference:
/people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
http://www.stylusstudio.com/edi/EDIFACT_translate.html
The steps to convert EDI to XML / XSD can be found at the following link:
http://www.stylusstudio.com/edifact_to_xml.html
Stylus studio download link: http://www.stylusstudio.com/xml_download.html
Thanks and Regards,
Chirag Gohil -
How to download to SAP CONVERSION AGENT
Hi,
Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->
is shows as Data unavailable.Request your help on this.
Regards,
Bhargav
Message was edited by:
bhargav gundaboluHI Bhargav
Try out this
SAP Software Distribution Center
Download
Support Packages and Patches
Entry by Application Group
SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
It is working
Thanks
Abhishek Mahajan
***Please reward points if helpful** -
SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support
Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
ChristophHi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph -
How to download SAP Conversion Agent 7.1 by Informatica
Hi Gurus,
I tried to download SAP Conversion Agent 7.1 by Informatica from following location
Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
but its showing No data available. Can anybody help me how to get this conversion agent.Well, I see it like this and everything work for me:
Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations? -
SAP Business Objects Performance Tuning Guides
Hello everyone,
I'm currently looking for Performance Tuning guides for the hardware/software. In particular, parameters for the hardware. I'm having a hard time finding any kind of guides on the server side of Business Objects. So I'm wondering if anybody knows of some that are available on the internet or SAP site?
I've found very few in the software department. However, I'm looking more for the hardware portion of Business Objects. Basically the goal is to get the server as optimal as possible (As far as memory, parameters, CPU, etc) is concerned so we know it can't be a hardware issue. It's kind of narrowing down the potential problems we can have later on down the road so that's why this is very important right now.
Any help with this will be greatly appreciated. Thanks in advance. -Victor
Edited by: Victor Munker on Jul 14, 2010 3:52 PMHere´s an updated version of that document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50770d8f-5606-3010-28a6-9e3bb14ec6a7?QuickLink=index&…
Cheers,
Esteban -
SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?
Hi Eperts,
I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
When i'm defining my ANCHORS/MARKERS/CONTENT/ .
getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
Could anyone can guide me pl.
Thanks in Advance..
regards,
vasantj.Hi vasantj,
Did you manage to resolve this issue?
I face the same problem.
Please ellaorate.
Nimrod.G -
SAP Web services performance tuning in terms of concurrent users?
Hello,
we in our organisation are planning to build a web portal which can connect to our sap environment and perform various tasks.
Hence to find out the performance capabilities we exposed some web services from SAP end and did a load test on the same.
The test results were not promising, with only 25 concurrent users the response time was as high as 12 seconds.
Now we need to fine tune the SAP web service module to get the max performance.
Can anybody point us in the right direction?One of the function module code is as follows
FUNCTION ZHRPULSE_CREATECONTACTS3.
*"*"Local Interface:
*" IMPORTING
*" VALUE(EMPL_CONTACT_DETAILSIN) TYPE ZHR_CONTACT_DETAILS
*" EXPORTING
*" VALUE(EMPL_CONTACT_DETAILSOUT) TYPE ZHR_CONTACT_DETAILS
*" VALUE(STATUS) TYPE ZHR_STATUS
*" TABLES
*" SUBTYPE_TABLE STRUCTURE ZHR_CONTACT
DATA: tempRet type BAPIRETURN1,
oref TYPE REF TO cx_root.
DATA: E_IT0001 type P0001.
CALL FUNCTION 'HREIC_READ_INFOTYPE_0001'
EXPORTING
I_PERNR = EMPL_CONTACT_DETAILSIN-EMPLOYEE_ID
I_DATE = sy-datum
IMPORTING
E_RETURN = tempRet
E_IT0001 = E_IT0001
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
Status-status = 'Failure'.
status-information = 'ID Not Found in Master Data.'.
exit.
ENDIF.
EMPL_CONTACT_DETAILSOUT-EMPLOYEE_ID = E_IT0001-PERNR.
EMPL_CONTACT_DETAILSOUT-EMPLOYEE_NAME = E_IT0001-ENAME.
SELECT single Btext from t001p into EMPL_CONTACT_DETAILSOUT-location where btrtl = E_IT0001-btrtl.
CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = EMPL_CONTACT_DETAILSIN-Employee_ID.
IF sy-subrc NE 0.
Status-status = 'Failure'.
status-information = 'NOT able to get a lock on the Employee ID'.
EXIT.
ENDIF.
CALL FUNCTION 'BAPI_ADDRESSEMP_CREATE'
EXPORTING
EMPLOYEENUMBER = EMPL_CONTACT_DETAILSIN-Employee_ID
VALIDITYBEGIN = SY-DATUM
VALIDITYEND = '99991231'
ADDRESSTYPE = '1'
STREETANDHOUSENO = EMPL_CONTACT_DETAILSIN-ADDRESS1
SCNDADDRESSLINE = EMPL_CONTACT_DETAILSIN-ADDRESS2
CITY = EMPL_CONTACT_DETAILSIN-CITY
POSTALCODECITY = EMPL_CONTACT_DETAILSIN-PIN_CODE
IMPORTING
RETURN = tempRet
EMPLOYEENUMBER = EMPL_CONTACT_DETAILSIN-Employee_ID
If sy-subrc eq 0.
Status-status = 'Success'.
status-information = 'Executed successfully'.
else.
Status-status = 'Failure'.
status-information = tempRet-message.
exit.
endif.
"For creating communication details
subtype_table-subtype = '9100'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-EXTENTION.
append subtype_table.
subtype_table-subtype = '9200'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-EMERGENCY_NO.
append subtype_table.
subtype_table-subtype = '9300'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-AVAYA.
append subtype_table.
subtype_table-subtype = '9400'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-MOBILE_NO1.
append subtype_table.
subtype_table-subtype = '9450'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-MOBILE_NO2.
append subtype_table.
subtype_table-subtype = '9500'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-DIRECT.
append subtype_table.
subtype_table-subtype = '9600'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-HOME.
append subtype_table.
if subtype_table[] is not initial.
Loop at subtype_table.
CALL FUNCTION 'BAPI_EMPLCOMM_CREATE'
EXPORTING
employeenumber = EMPL_CONTACT_DETAILSIN-Employee_ID
subtype = subtype_table-SUBTYPE
validitybegin = sy-datum
validityend = '99991231'
communicationid = subtype_table-communicationid
IMPORTING
return = tempRet
If sy-subrc eq 0.
Status-status = 'Success'.
status-information = 'Executed successfully'.
else.
Status-status = 'Failure'.
status-information = tempRet-message.
exit.
endif.
Endloop.
CLEAR subtype_table.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
"for unlocking the employee ID
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
EXPORTING
number = EMPL_CONTACT_DETAILSIN-Employee_ID
" IMPORTING
" return =
EMPL_CONTACT_DETAILSOUT-ADDRESS1 = EMPL_CONTACT_DETAILSIN-ADDRESS1.
EMPL_CONTACT_DETAILSOUT-ADDRESS2 = EMPL_CONTACT_DETAILSIN-ADDRESS2.
EMPL_CONTACT_DETAILSOUT-CITY = EMPL_CONTACT_DETAILSIN-CITY.
EMPL_CONTACT_DETAILSOUT-PIN_CODE = EMPL_CONTACT_DETAILSIN-PIN_CODE.
EMPL_CONTACT_DETAILSOUT-EXTENTION = EMPL_CONTACT_DETAILSIN-EXTENTION.
EMPL_CONTACT_DETAILSOUT-EMERGENCY_NO = EMPL_CONTACT_DETAILSIN-EMERGENCY_NO.
EMPL_CONTACT_DETAILSOUT-AVAYA = EMPL_CONTACT_DETAILSIN-AVAYA.
EMPL_CONTACT_DETAILSOUT-MOBILE_NO1 = EMPL_CONTACT_DETAILSIN-MOBILE_NO1.
EMPL_CONTACT_DETAILSOUT-MOBILE_NO2 = EMPL_CONTACT_DETAILSIN-MOBILE_NO2.
EMPL_CONTACT_DETAILSOUT-DIRECT = EMPL_CONTACT_DETAILSIN-DIRECT.
EMPL_CONTACT_DETAILSOUT-HOME = EMPL_CONTACT_DETAILSIN-HOME.
ENDFUNCTION. -
SAP Connector Factory - performance tuning in VA
Is anyone aware of SAP guidance or notes on how to tune the SAP connector SAPFactory properties, especially where a Portal makes RFC calls across multiple ABAP-based backends? For example SAP Note 1021921 shows this property is important when closing backend BI RFC sessions as they are not terminated by the DSM.
Visual Administrator
Services -> Connector Container
Runtime -> Connectors -> Connector 1.0 -> sap.com/com.sapportals.connectors.sap -> SAPFactory
Managed Connection Factory -> Connection Definition
Connection Lifetime
Cleanup Thread
Max Connections
Max Time to wait for Connection
In our environment we have CRM, BI and ECC backends. Thanks!Hi
Please check the following links :
http://help.sap.com/saphelp_nw70/helpdata/en/89/8a185c148e4f6582560a8d809210b4/content.htm
and
http://help.sap.com/javadocs/NW04s/current/ep/constant-values.html
I hope this helps
Regards
Chen -
Help required regarding Integrating Conversion Agent with SAP-XI
I want to run a simple File to File scenario which involves integrating conversion
agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
I deployed the module and I configured the channel in the same way what was specified in the webblog.
But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
Can u please provide me the solution for correcting the above error, this would be a great help for me..HI,
see the below links
http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
with item fiels.
Regards
Chilla
Maybe you are looking for
-
Error when trying to access OAM 11g Admin console
I am getting an error when I try to access the OAM admin console, the page appears after I enter http://hostname:14100/oam but the login box has the following message in it: System error. Please re-try your action. If you continue to get this error,
-
Facetime on multiple devices with same Apple ID?
Hi...we have an iPad 1, iPhone 4S, iPod touch from 2010 and new iPod Touch yesterday. I have not set up the new iPod Touch yet...but all the other devices are using the same Apple ID so I can buy apps and allow all my devices to get the apps installe
-
How to Delete the Latest Version of a Document
Suppose i have a document A which has 3 versions, 1,2 and 3 now i have to delete the 3rd version and make 2nd as the latest one. how to go about doing that??
-
Hi, i have one requirement, i would like to create one ztable,i want display one field for drag down option, could u please sugest me how to create particular field for drag down option. Regards, koti. Moderator Message: Do not ask vague questions.
-
Is it possible to get the breakup of subtotals got by using subtot of sort.
I have developed a alv report by using the 'REUSE_ALV_GRID_DISPLAY' function module, in this I have got the grand total by using the sum field from the fieldcatalog table i.e.(slis_t_fieldcat_alv) And I have got the subtotals by using the subtot fiel