SAP Conversion Agent Studio Preview Version

Hi,
Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
Are there newer version of the SAP Conversion Agent Studio Preview Version?
Any suggestions are welcome.
Thx
Robert

Hi Conversion Agent experts,
Do you have any ideas?
Thx
manuku

Similar Messages

  • SAP Conversion Agent: HL7 library project could not be executed

    Hi experts
    I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
    So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
    "Invalid service 'TEST'. Check service name and service database"
    Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
    <description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
    <time>N/A</time>
    </Event>
    </Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
    I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
    Do you have any ideas?
    Thx,
    manuku

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • XI supports EDIFACT without SAP Conversion Agent and others.

    Hello.
    Somebody knows the best way to convert EDIFACT message using XI?
    What I can do this without using softwares of conversion like:
    - SAP Conversion Agent;
    - Seeburger;
    - BIC Mapper and others.
    Thanks very much in advance.

    Hi,
    See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
    Here is the link for your reference:
    /people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
    http://www.stylusstudio.com/edi/EDIFACT_translate.html
    The steps to convert EDI to XML / XSD can be found at the following link:
    http://www.stylusstudio.com/edifact_to_xml.html
    Stylus studio download link: http://www.stylusstudio.com/xml_download.html
    Thanks and Regards,
    Chirag Gohil

  • Conversion Agent Studio in XI

    Dear All,
    I am working in a XI development project and here I have a scenario to convert the PDF document (Purchase Order) into XML document and use the same to create a sales order by using Process Integration.
    For the above scenario, I found that we need to install Conversion agent studio in SAP PI system and use the same to generate the XML out of PDF document.
    I have already deployed the software in SAP Netweaver. Now I have no idea how to use this software and where I will get this in my SAP NW system.
    Many thanks & Best regards,
    Arun

    Hi,
    please go through these
    /people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
    /people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3332- [original link is broken] [original link is broken] [original link is broken] How To Get Started Conversion Agent
    Reward Points if Helpful
    Regards
    Sesha

  • Qery related to Conversion Agent Studio installation

    Hi All,
    I have a query related to Conversion Agent. We have downloaded the SAPNWCM20_0-20001444.SCA file and installed the conversion agent engine on SAP XI J2EE engine which is basically installed on Sun Solaris system.
    I want to use conversion agent studio at a remote place on Windows OS 32 bit system.
    Please help me
    1) how to install the <b>conversion agent studio on windows 32 bit system.</b>.
    2)<b> Is it possible to install conversion agent studio on Windows 32 bit system because Conversion agent engine is installed on Sun Solaris system.</b>
    Thanks & Regards
    Prabhat

    Hi Can you please elaborate more on installation of conversion agent studio as the document mentioned in the link is not in details regarding installation of conversion agent studio.
    Thanks & Regards
    Prabhat

  • SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

    Hello
    I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
    In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
    Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
    Thanks
    Christoph

    Hi Mark
    Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
    C:\Documents and Settings\pi1adm>CM_console -v
    Engine-Version: 8.6.0(Build:30)
    Engine-Syntaxversion:4.00.10
    I will oben a ticket for that ...
    Regards
    Christoph

  • Installing Conversion Agent studio

    Hi
       We are on XI 3.0 SP18 and want to try out using conversion agent 1.0 for a scenario. 
    I downloaded file SAPNWCM18_0-10003671.sca.zip from service.sap.com and then try to install converstion agent studio on my Windows XP desktop - as per instructions - I am asked to extract the ConversionAgent.sda file - and then run one of the *exe file that was extracted from the sda file . However I do not see any exe file in the contents of the ConversionAgent.sda file - Is this the sda file that contains conversion agent studio and the conversion agent engine ?  If so, how do I go about installing the studio and the engine on my desktop - ?

    Nilesh
               Thanks for the reply. In my case, when I extract the ConversionAgent.sda file using winzip - I do not see any *exe file in the extracted files - I see only the following four files
    Setup_Aix.bin
    Setup_Aix.bin_imp
    pathWithoutDot
    wc
    along with a couple of folders assemblies and Meta-inf.
    Just to repeat, I downloaded the SAPNWCM18_0-10003671.sca.zip file from service market place for my aix 64 bit system on which XI resides. I get my ConversionAgent.sda file by extracting the above zip file

  • Sender Mail Adapter with SAP Conversion agent

    have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
    it seems to ignore the attchment of the e-mail
    the sender configuration module tab is as follows :
    1.localejbs/AF_Modules/PayloadSwapBean transform
    2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
    3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
    The paramters are
    transform swap.keyName Content-Disposition
    transform swap.keyName Content-Description
    transform swap.keyValue attachment
    transform swap.keyValue codeco
    CM TransformationName ZIM_CODECO_VALIDATIONS
    The Convesion Agnet runs prefectly when using the Conversion Agent engine
    thx,Shai Rosenzweig

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • Urgent: IDOC to EDI with SAP Conversion Agent

    Hi,
    I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
    We have decided to use SAP Conversion Agent to deal the same.
    Can anybody share their experiences on this kind of scenario.
    Needed step by step information to complete would be appreciated with the full of points.
    Cheers.,
    E

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • SAP Conversion Agent

    Hi,
    I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
    1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
    2. It is a must to use the EDI message parsing templates provided in the CA library ?
    3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
    I have gone throught the help document. Please help me find answers for the above questions.
    Thanks,
    Hari

    Hi SreeHari,
    Please refer to the link below,which might help you.
    [SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
    Regards,
    Madhu

  • SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?

    Hi Eperts,
    I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
    I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
    When i'm defining my ANCHORS/MARKERS/CONTENT/ .
    getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
    Could anyone can guide me pl.
    Thanks in Advance..
    regards,
    vasantj.

    Hi vasantj,
    Did you manage to resolve this issue?
    I face the same problem.
    Please ellaorate.
    Nimrod.G

  • SAP Conversion Agent - Performance Tuning

    Hi Experts,
    We are working with SAP Conversion agent..we have developed several scenarios on that...
    But, Now we are worried about the performance issues on the same.
    Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
    -S

    Hi,
    /people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
    Conversion Agent
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    Thanks,
    Madhu

  • How to download to SAP CONVERSION AGENT

    Hi,
    Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
    SAP Software Distribution Center
        Download
            Support Packages and Patches
                Entry by Application Group
    SAP NetWeaver ->
    is shows as Data unavailable.Request your help on this.
    Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu

    HI Bhargav
    Try out this
    SAP Software Distribution Center
    Download
    Support Packages and Patches
    Entry by Application Group
    SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
    It is working
    Thanks
    Abhishek Mahajan
    ***Please reward points if helpful**

  • How to download SAP Conversion Agent 7.1 by Informatica

    Hi Gurus,
    I tried to download SAP Conversion Agent 7.1 by Informatica from following location
    Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
    but its showing No data available. Can anybody help me how to get this conversion agent.

    Well, I see it like this and everything work for me:
    Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

  • Help required regarding Integrating Conversion Agent with SAP-XI

    I want to run a simple File to File scenario which involves integrating conversion
    agent. I gone through a webblog:Integrate SAP Conversion Agent by Itemfield with SAP XI
    I deployed the module and I configured the channel in the same way what was specified in the webblog.
    But when I run my scenario I found CM_TRANSFORMATION_ERROR as the error in communication channel monitoring.
    Can u please provide me the solution for correcting the above error, this would be a great help for me..

    HI,
    see the below links
    http://help.sap.com/saphelp_nw04/helpdata/en/43/6f1f39a08e6fcae10000000a1553f6/CMSUserGd.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    with item fiels.
    Regards
    Chilla

Maybe you are looking for