SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?

Hi Eperts,
I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
When i'm defining my ANCHORS/MARKERS/CONTENT/ .
getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
Could anyone can guide me pl.
Thanks in Advance..
regards,
vasantj.

Hi vasantj,
Did you manage to resolve this issue?
I face the same problem.
Please ellaorate.
Nimrod.G

Similar Messages

  • SAP Conversion Agent: HL7 library project could not be executed

    Hi experts
    I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
    So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
    "Invalid service 'TEST'. Check service name and service database"
    Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
    <description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
    <time>N/A</time>
    </Event>
    </Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
    I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
    Do you have any ideas?
    Thx,
    manuku

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • XI supports EDIFACT without SAP Conversion Agent and others.

    Hello.
    Somebody knows the best way to convert EDIFACT message using XI?
    What I can do this without using softwares of conversion like:
    - SAP Conversion Agent;
    - Seeburger;
    - BIC Mapper and others.
    Thanks very much in advance.

    Hi,
    See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
    Here is the link for your reference:
    /people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
    http://www.stylusstudio.com/edi/EDIFACT_translate.html
    The steps to convert EDI to XML / XSD can be found at the following link:
    http://www.stylusstudio.com/edifact_to_xml.html
    Stylus studio download link: http://www.stylusstudio.com/xml_download.html
    Thanks and Regards,
    Chirag Gohil

  • How to download to SAP CONVERSION AGENT

    Hi,
    Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
    SAP Software Distribution Center
        Download
            Support Packages and Patches
                Entry by Application Group
    SAP NetWeaver ->
    is shows as Data unavailable.Request your help on this.
    Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu

    HI Bhargav
    Try out this
    SAP Software Distribution Center
    Download
    Support Packages and Patches
    Entry by Application Group
    SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
    It is working
    Thanks
    Abhishek Mahajan
    ***Please reward points if helpful**

  • SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

    Hello
    I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
    In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
    Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
    Thanks
    Christoph

    Hi Mark
    Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
    C:\Documents and Settings\pi1adm>CM_console -v
    Engine-Version: 8.6.0(Build:30)
    Engine-Syntaxversion:4.00.10
    I will oben a ticket for that ...
    Regards
    Christoph

  • How to download SAP Conversion Agent 7.1 by Informatica

    Hi Gurus,
    I tried to download SAP Conversion Agent 7.1 by Informatica from following location
    Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
    but its showing No data available. Can anybody help me how to get this conversion agent.

    Well, I see it like this and everything work for me:
    Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

  • Sender Mail Adapter with SAP Conversion agent

    have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
    it seems to ignore the attchment of the e-mail
    the sender configuration module tab is as follows :
    1.localejbs/AF_Modules/PayloadSwapBean transform
    2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
    3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
    The paramters are
    transform swap.keyName Content-Disposition
    transform swap.keyName Content-Description
    transform swap.keyValue attachment
    transform swap.keyValue codeco
    CM TransformationName ZIM_CODECO_VALIDATIONS
    The Convesion Agnet runs prefectly when using the Conversion Agent engine
    thx,Shai Rosenzweig

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • Urgent: IDOC to EDI with SAP Conversion Agent

    Hi,
    I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
    We have decided to use SAP Conversion Agent to deal the same.
    Can anybody share their experiences on this kind of scenario.
    Needed step by step information to complete would be appreciated with the full of points.
    Cheers.,
    E

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • SAP Conversion Agent

    Hi,
    I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
    1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
    2. It is a must to use the EDI message parsing templates provided in the CA library ?
    3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
    I have gone throught the help document. Please help me find answers for the above questions.
    Thanks,
    Hari

    Hi SreeHari,
    Please refer to the link below,which might help you.
    [SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
    Regards,
    Madhu

  • SAP Conversion Agent Studio Preview Version

    Hi,
    Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
    I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
    When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
    Are there newer version of the SAP Conversion Agent Studio Preview Version?
    Any suggestions are welcome.
    Thx
    Robert

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • SAP Conversion Agent - Performance Tuning

    Hi Experts,
    We are working with SAP Conversion agent..we have developed several scenarios on that...
    But, Now we are worried about the performance issues on the same.
    Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
    -S

    Hi,
    /people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
    Conversion Agent
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    Thanks,
    Madhu

  • W25    The Characteristic %NV% is not found in data provider ...

    Hi Gurus,
    we are currently starting to use the BI Portal. I want to publish a Query, which really works fine in BEx Analyzer, in the Portal using a Web Template.
    So I used the BEx Web Application Designer to create a Template where I just inserted the Analysis Item with my data provider.
    In BEx Web Application Designer I get the warning "W25 The Characteristic %NV% is not found in data provider XXX" - and when I open my Query in the Portal I get the dump message
    "ERROR RS_EXCEPTION (000): SQL0104N  An unexpected token """" was found following "'1' AND "I"."SVER" =".  Expected tokens may include:  "<space>".  SQLSTATE=42601
      MSGV1: SQL0104N  An unexpected token """" was found
      MSGV2: following "'1' AND "I"."SVER" =".  Expected tokens
      MSGV3: may include:  "<space>".  SQLSTATE=42601
    ABEND RSBOLAP (000): Programmfehler in Klasse SAPMSSY1 Methode : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION".
    Does anybody have an idea what's the problem? Please?
    Thank in advance!

    Sandra,
    If you are not on SPS-14 try applying this note
    1122372.
    Please assign points if helpful.
    Thanks,
    Bobby

  • File sap/hcm_lr_cre/index.html NOT found!

    Dear Experts,
    I am facing the below issue when i click on Create Leave Request from launchpad
    File sap/hcm_lr_cre/index.html NOT found!
    I am clue less I have recently applied all the notes mentioned
    SAP Fiori - UI Add-on SP09 update troubleshooting
    Kindly help
    Regards,
    Vijay
    Tags edited by: Michael Appleby

    Dear Masa,
    The application is opening perfectly once I assign STD. Role.SAP_HCM_BCR_EMPLOYEE_X1
    Earlier I have assigned only custom role which I have created for custom Cataloge & group with the help of below link.
    Creating PFCG Role and Assigning Catalogs and Groups - SAP Fiori principal apps for SAP ERP 1.0 - SAP Library
    My requirement and approach
    We are going to use the only Leave Request application for Employee. So for that I had to create a custom Catalogue & Group with standard Create Leave Request application. and Created a custom role to assign the created Catalogue & Group  ( to display only Leave Request application.
    URL: /sap/bc/ui5_ui5/ui2/ushell/shells/abap/Fiorilaunchpad.html?sap-client=550&sap-language=EN
    Regards,
    Vijay

  • Com.sap.pct.pdk.navigationconnectortestrole not found

    Hi,
    When i  cilck on a button in UWL for approval  it says URL Parameter not exists
    When i check i log file it says com.sap.pct.pdk.navigationconnectortestrole not found!#
    Please can anyone help it out.
    Thanks
    Srikanth

    Below is the log
    When i am trying to When i cilck on a button in UWL for approval it says URL Parameter not exists
    When i check i log file it says com.sap.pct.pdk.navigationconnectortestrole not found!#
    Please can anyone help it out.
    1.5 #000BCD4305DF007500000D8900001FC800044D5C0BE65B16#1210957638799#com.sap.security.core.util.SecurityAudit#sap.com/irj com.sap.pct.pdk.navigationconnectortestrole #com.sap.security.core.util.SecurityAudit#Guest#0##n/a##8a791700236a11dd9bf5000bcd4305df#SAPEngine_Application_Thread[impl:3]_38##0#0#Warning#1#/System/Security/Audit#Plain###Guest     | LOGIN.ERROR     | null     |      | Login Method=[default], UserID=[null],
    Thanks
    Srikanth
    Edited by: srikanth d on May 18, 2008 9:40 AM

  • OATS - OLT : Request error : agent image not found on disk: empJAgent.exe

    Hello folks,
    When i am trying to run a OLT scenario using localhost as VU Agent, i get the following message. Although using other VUAgents the test works fine.
    "Request error : agent image not found on disk: empJAgent.exe"
    OLT Version : Oracle Load Testing 12.1.0.1.0 build 383
    Any help regarding this would be helpful.
    Regards,
    Nishant

    I eventually figured this out - it was that the portal management agent hadn't been created yet, I had to create it.

Maybe you are looking for

  • HT1338 how do i get mac app store

    the app store aint in my apple botton inthe top left coner

  • Memory Leak when running Contacts

    I am having a big memory leak when running the app Contacts on a MB Air. It gobbles up 2 GB of ram in just a few minutes forcing a reboot. I have re-installed Mountain Lion 10.8.2 and it still leaks memory. Watching Activity Monitor shows the rapid i

  • ITunes Window Apparently Too Small

    I just received a 160 GB iPod classic as a gift and tried syncing it with my iTunes. It prompted me to download a more current version of iTunes so I downloaded iTunes 7.5. I cant do anything with my new iPod because I'm stuck at the software license

  • Video Noise

    Is there a way to decrease the noise in a video with imovie, or to enhance voices?

  • Completely backing up everything on my MacBook...

    Is there a simple way to take everything on my computer and transfer it onto a new MacBook? Mine is going to be replaced.