SAP CRM 2007 Upgrade to EHP 1 for CRM 7.0

Hi all I am doing an upgrade from 2006 to EHP1 CRM for CRM 7.0, to reach the checkpoint I mark the following error:
This trouble ticket was created by SAPup on 20110826000546
SAPup broke during phase SUBMOD_EXTENSION_NEW/EHP_INCLUSION in module PREP_EXTENSION / Extension module
Error Message: Stack inclusion failed: patch level 1 for component ST-PI is too low, destination level is already at 4
Summary of SAPup:
SAPehpi Release:     lmt_001
SAPehpi Version:     40.000
Start Release:          700
Target Release:          702
Summary of host system details:
SID:               CRP
Host:               Server005
MS Host:          Server005
GW Host:          Server005
Start Path:          /usr/sap/CRP/DVEBMGS00/exe
Kernel Path:          /usr/sap/CRP/DVEBMGS00/exe
Summary of operating system details:
OS Type:          AIX
OS Version:          6.1.0
Summary of database details:
Database Type:          db6
Database Version:     09.07.0001
Summary of RFC details:
Host:               server005
GW Host:          server005
Client:               000
Destination:          CRP
Language:
System No.:          00
How i can solve this?

Hi Antonio.
I'm wondering if/how you resolved this issue. I am currently facing the same problem on an upgrade to EHP1 for CRM 7.
Thanks,
//Eric
Edited by: Eric Roholt on Sep 9, 2011 9:03 PM

Similar Messages

CRM 2007 Upgrade - IE 7.0 Tabs

Hi Gurus
Our client has recently upgraded from CRM 5.0 to CRM 2007
We are using the IC Webclient
I have an issue when I confirm the customer:
When I have IE 7.0 open with only the IC Webclient active, on confirming the customer the Account Info area is correctly populated.
When I have IE 7.0 open already and then launch the IC Webclient, it appears in a new tab for the current IE 7.0 instance, on confirming the customer the Account Info area is left blank.
I have not been able to locate any threads or notes on this subject but would imagine this to be a common issue.
Any guidance gratefully received and rewarded.
Many Thanks in advance
Panduranga

Hi,
We were also facing similar problem with password. Actually what happens is if session is opened in other tab of explorer, it reads the cookies of first tab. So problem like this come. I dont think any note/ thread can solve this problem beacuse it is issue of internet explorer and not of SAP CRM.
Best regards
Pankaj Kumar

CRM 2007 Upgrade stops at SHADOW_IMPORT_UPG2

We are in the process of Upgrading CRM 5.0 to CRM 2007.
In the phase SHADOW_IMPORT_UPG2 stops with error.
As per the log SHDUPGIMP2.ELG and note 626915 the The index for table COMC_ATTRIBUTE had been recreated.
After this even the upgarde is not able to continue.
Thanks in Advance ...
Regards
Mathew Thomas
Log below
ERROR: 25 errors detected during SHADOW_IMPORT_UPG2.
ERROR: Operation(s) not completely processed.
       Remaining change requests found in buffer CRD.
       Ignoring aborted import steps will cause severe inconsistencies
       and will likely require a full repeat of the whole upgrade.
       !!! Do not manipulate the import buffer !!!
       Analyze summary error logfile SHDUPGIMP2.ELG
       and remove all error conditions in the way
       it is described in the upgrade manual. Repeat
       this phase until it is error free.
       Additional hints may be given in logfiles
       SLOG700 and /usr/sap/put/log/SAPup.ECO
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPK700TF3.CRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
2EETW000 Update and insert sequence failed due to conflicting unique indexes on table COMC_ATTRIBUTE (please read OSS note 626915 for details)
UPGRADEPHASE SHADOW_IMPORT_UPG2
...started at 20080904092052
Reading Parameter File "/usr/sap/put/bin/SHDUPGIMP2.TPP" at 20080904092053
...begin processing at 20080904092053
...tp-pid 3039
Reading Parameter File "/usr/sap/put/bin/DEFAULT.TP0" at 20080904092117
Condition level 1, total => TRUE '#if 3 >= 0' => TRUE
..finished at 20080904092118 with status UNRESOLVED REQUESTS IN BUFFER.
...begin dialogue at 20080904092118

Hi Makus,
Thanks for your reply
Here is the ls of /usr/sap/put/tmp i have taken just now, looks like noting is happening, Upgrade assistant is running since last night and it is not going anywhere.
-rw-rw-rw-   1 devadm     sapsys        2310 Nov 28 11:14 UCMIG_DE.ECO
-rw-rw-rw-   1 devadm     sapsys        1990 Nov 28 11:16 R3trans.out
-rw-rw-rw-   1 devadm     sapsys        2302 Nov 28 11:20 ADDON_TR.ECO
-rw-rw-rw-   1 devadm     sapsys         726 Nov 29 23:22 crshdusr.log
-rw-rw-rw-   1 devadm     sapsys        3612 Dec 1 11:24 EU_IMTSK.ECO
-rw-rw----   1 devadm     sapsys         424 Dec 1 13:37 SAPRUPGM.DEV
-rw-rw-rw-   1 devadm     sapsys        1282 Dec 1 19:30 TP.ECO
-rw-rw-r--   1 devadm     sapsys         460 Dec 1 19:30 dev_evt
-rw-rr   1 devadm     sapsys        1084 Dec 2 09:23 dev_sapstart
-rw-rr   1 devadm     sapsys         159 Dec 2 09:23 dev_shmdiag
-rw-rw-rw-   1 devadm     sapsys        9151 Dec 2 09:23 dev_rfc
-rw-rw-rw-   1 devadm     sapsys        2566 Dec 2 10:38 TPAPP.ECO
-rw-rw-r--   1 devadm     sapsys     13018112 Dec 2 11:11 SAPK700WG7.DEV
-rw-rw-r--   1 devadm     sapsys         250 Dec 2 21:50 SAPKK700WG1.DEV
-rw-rw-r--   1 devadm     sapsys     1127757 Dec 2 21:50 SAPK700WG1.DEV
here is also ps -ef | grep tp
    root 1842     1 0 15:41:51 ?         0:02 /usr/sbin/xntpd
    root 2697 2687 0 15:42:33 ?         0:20 /opt/java1.4/jre/bin/IA64N/java -cp /var/opt/OV/bin/instrumentation:OvSvcDisc.jar:OvBbcHttp.jar:xerces.jar -DOvInstallDir=/opt/
devadm 28873 28603 0 10:44:20 pts/3     0:00 grep tp
devadm 16258 11057 0 23:21:07 pts/0     0:02 /usr/sap/put/exe/tp pf=/usr/sap/put/bin/SHDUPGIMP2.TPP put DEV

CRM 2007 upgrade roadmaps

Hello there,
We are planning to upgrade from CRM 4.0 SP7 (on WAS 6.20) to CRM 2007 later in the year. Before this, it is desired to start using the CRM Web Shop (E-Commerce with CRM), which is not in use yet.
What's the popular opinion on here: upgrade CRM first and then tackle the Online Store - or is there any reason not to implement the Online Store first, ie before upgrading. In other words, how easy is it to migrate a CRM 4.0 Online Store to a CRM 2007 Online Store later on ?
Also, is there any material available regarding upgrade roadmaps? I don't mean release documentation, but a guide that picks you up on your current CRM/ERP release / Netweaver platform and then tells you which options you have for upgrading.
Kind regards,
Michael Koch
Edited by: Michael Koch on Mar 11, 2008 8:39 PM

>
Andrew Findlay wrote:
> Hi Michael,
>
> My suggestion would be to upgrade first as a lot easier - as reducing the workload. Also it depends on the type of shop as B2C webshop became frameless in 5.0. Especially with new functionality and screen (HTML) design usually done it will make it easier to upgrade first. Also with the introduction of NWDI for change management for java and developer studio etc that makes developing ISA easier.
>
> Also for your information it is a direct technical upgrade from 4.0 to CRM 2007.
Thanks for your helpful answer, Andrew.
I think the web shop scenario we're after would be B2B - any infos on changes and implications for this?
Also, what do you mean by "direct technical upgrade"? I know that minimum requirement for CRM 2007 is NW 2004s (7.0), is that what you mean?
Kind regards,
Michael

CRM 2007 Upgrade - RDDIT006 Phase is failing in Prepare --

I 'm upgrading from CRM 5.0 to CRM 2007 . One of the phase is failing in modification support in PREPARE (RUN_RDDIT006_PRE) .
The fix provided by SAP did not work , the phase keeps on failing .
Looks like this job runs again in actual upgrade . Did someone come across same problem before ??
Joshua

This has been resolved . tranport was provided from SAP . its a bug

CRM 2007 Upgrade - Std Comm. Method not visible in "More Fields"

Hi Gurus
We recently upgraded from CRM 5.0 to CRM 2007.
I'm verifying the Identify Account views, when I compare the "More Fields" view between CRM 5.0 and CRM 2007, the "Std Comm. Method field is not there.
I though I could add this via configuration mode but the only Comm Method field I can find does not have a drop down list associated with it which doesn't make sense.
Has anyone else had this same issue and how resolved.
Many Thanks
Panduranga

The Comm Type field is supplied but without a drop down list as it did in CRM 5.0
We have to modify the field to include the drop down.
A loss in Standard Functionality!!!

Highly Required CRM 5.0 Best practices for CRM Service Module

Dear all,
I have been searching for CRM 5.0 version best practices in Internet quiete a long period, but could not find anywhere.
currently SAP is providing only best practices for SAP CRM 2007 version.
since most of configuration is differing because of Webclient Interface, I request you to refer a source from where I can get the CRM 5.0 Best Practices for Service module.
Your suggestions and help will be highly appreciated.
Best regards
Raghu ram

Hi Srini,
<removed by moderator>
Thank you & Best regards
Raghu ram
Edited by: Raghu Ram on Jul 16, 2009 6:09 AM
Edited by: Raghu Ram on Jul 16, 2009 6:11 AM
Moderator message please review the rules of engagement located here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Edited by: Stephen Johannes on Jul 16, 2009 8:12 AM

From R/3 to CRM create one logical system for CRM client 300.

Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

Hi,
Business Systems are te logical system name for a CLient in the SAP.
These can be reused again for different configuration scnario that you must have created for different interface.
All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
Regards
Vijaya

For R/3 to CRM Scenario ,creating ABAP Proxy for CRM which is in Target

In R/3 to CRM scenario it is ok creating ABAP Proxy for CRM which is Target system.if it is possible it is Client Proxy.it is correct or not

Hi,
Client Proxy. When you need to create Proxy for your Sender system then the proxy is generated on the client side and the Class created in Proxy generation is called in a report/FM etc.
Server proxy. The server proxy is created when you are sending the data from SAP XI to the receiving system.
The generation of proxy in both the cases happens on the sender or the receiver system.
Regards
Vijaya

MRS - CRM Integration: Resource Planning Node for CRM demands

Hi all,
We have a multi backend scenario where MRS 800 add-ons (ECC and NW add-on) have been installed in ECC. Demands can come from the ECC PM/CS orders or from the CRM system as Service orders.
For PM/CS orders, from the work center of the activity or operation, the system determines the planning node and assigns the demand to that planning node. But we need help in identifying the Evaluation Path for determining the Resource Planning Node for demands coming from CRM. Currently we have to manually select the CRM Service Order to be able to view the demands in the MRS planning board.
The service organization structure has been created manually in CRM and is not available in ECC system. We are unable to identify which organization structure can be used as resource planning structure (in the Planning board which is in ECC) for CRM service orders.
Please provide your inputs on these two issues in the MRS-CRM scenario:
1. What is the evaluation path for determining the Resource Planning Node for demands coming from CRM system?
2. Which organization structure can be used as resource planning structure (in the Planning board which is in ECC) for CRM service orders?
I would appreciate any help in this regard.
Thank you!
Kajal

You can find the related screenshots under this link
[http://img706.imageshack.us/img706/9596/mrsevaluationpaths.jpg|http://img706.imageshack.us/img706/9596/mrsevaluationpaths.jpg]
Thank you
Simon

CRM 2007 Upgrade - Component Type is Missing in Structure

Hi,
we found that structure /1CRMG0/CNBCCPSAP005 has empty data type for each of its component types. this causes error each time we try to activate the structure and we can't proceed the upgrade to 2007.
we try to maintain the component type, but we encounter message "Object can only be created in package of namespace /1CRMG0/". even we try to maintain in the suggested package, it prompts error System setting does not allow you to change R3TR TTYP /1CRMG0/CCPSAP005001T. we can't proceed further at this point.
we implemented sap note 0000817539 & 0000643510, but still no success.
any lead is really appreciated
JD

Dear JD,
hopefully you have already solved your problem. If not perhaps the following information is helpful:
These Function Modules are created when the Sbdoc is generated
using the report CND_MAST_GEN_TRANSFER_OBJECTS.
Please check if the Sbdoc is generated correctly in your system or not.
You can check this in transaction SBDM.
The Sbdoc name is CNBCRMPRSAP005.
If the Sbdoc is not created correctly please use the report above to
generate and activate it.
In any case if the problem is solved, please close the thread!
Regards, Gerhard
Moderator

CRM 2007 Java Upgrade to CRM 7.0 EHP2

Hi All,
I performed dual stack split in CRM 2007 with separate DB for ABAP and JAVA. For upgrading CRM 2007 I tried generating solman XML file. For CRM 2007 Java, the target is chosen as CRM 7.0 EhP2, but the Net weaver components are showing the current version 700 SP21. I tried couple of times still NW 7.00 SP21 (current version) only appearing for target in solman. In Abap side, I got NW 7.03 as target for CRM 7.0EHP2 upgrade. Please advise what could be wrong.
Thanks,
Kavitha Rajan.

Ajay_Basis wrote:
Hi Srikishan,
>
> Actually we are having issues with the SAP router and we are unable to calculate the queue for EHP2 upgrade and hence we can't use EHP Installer upgrade. Could you please confirm if it is not possible using full upgrade (using SapUP) tools?
>
>
> Thanks,
> Ajay.
First, you have to use EHPi installer to do this upgrade. Second, for EHP2 upgrade, MOPZ is must because you need stack file that you can get from MOPZ only. Also, patches for EHP2, you can get from MOPZ only.
Thanks
Sunny

Partial display of large Alert message - SAP CRM 2007.

Hi,
I am using SAP CRM 2007.
I created a simple alert with 150 char message in IC which will be triggered on confirmation of an account.
The alert gets displayed on the IC agent screen but he can only see partial message of the alert.
Only the message that can come in the first line gets displayed. There is no option to scroll to see the remaining message.
Please suggest how can user see the complete alert message. Can the alert text area be controlled by some customization?
Regards,
Akanksha

Hi Antonio.
I'm wondering if/how you resolved this issue. I am currently facing the same problem on an upgrade to EHP1 for CRM 7.
Thanks,
//Eric
Edited by: Eric Roholt on Sep 9, 2011 9:03 PM

Upgrade from CRM 5.0 to CRM 2007

Hi,
We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
You will rewarded with the points. Thanks in advance. Please, Its URGENT...
Cheers,
Amit

Amit,
Based on your reply your work looks like the following:
1. Basis teams performs tech upgrade of your dev system
2. Security team grants temporary expanded access in dev system to access new UI and new UI tools
3. Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
4. Dev/Config team adjusts any BADI's built in the previous release
The data model of CRM has not changed. If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration. However if you did not play by the SAP standards you could have more work.
As far as tracking your project you can use solution manager or build simple project tracking in MS project.
If you did no coding period, and only configuration. You should be able to complete all the configuration work in less than two weeks to get the screens as needed. However that is based on having at least one to two weeks of learning the new UI tool.
I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
Take care,
Stephen

FAQ: User Interface Guidelines for CRM 2007 are now available

The CRM UI Concept Team has made the UI Guidelines for CRM Web Client User Interface (CRM 2007 UI) available to the BPX community:
This document provides an overview of the on-premise as well as the off-premise versions of the SAP CRM Web Client User Interface (UI). It contains the properties and principles of the SAP CRM Web Client UI that are already committed and available. For planned features, refer to the corresponding specification documents.
The information in the guidelines starts with general topics, followed by details. The sections are organized with high-level topics like Page Types and Navigation Schema first, followed by the consecutive sections describing which building blocks and elements of the UI populate the various pages. A section typically starts with one or more screenshots of a central UI element with a generic explanation. The subsequent sections explain the detailed aspects of each element.
We hope that you will find this information useful.
Enjoy the new CRM UI! [UI Guidelines for CRM Web Client User Interface (CRM 2007 UI)_ |http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf]
Edited by: Zhaojie Liu on Jun 10, 2009 10:08 AM

Hi,
not sure why your download stops.. you can also try to download via this link: [http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf|http://www.sapdesignguild.org/resources/CRM-UI-Guidelines-Customers.pdf] (Document is 17,4MB of size)
Here the guidelines also have been posted together with an article about the CRM 2007 Web Client UI.
Hope this helps
Best regards
Ingo

SAP CRM 2007 Upgrade to EHP 1 for CRM 7.0

Similar Messages

Maybe you are looking for