SAP CRM 7.0.2 issue regarding authorizations

Hello,
I have noticed that the role change is not reflecting immediately for the user in CRM 7.0.2 Web UI. Is anyone facing the same issue like this? If so, any solution to this for immediate effect?
Thanks in Advance.

Hi Luis,
You need to create a authorization object with 'sales rep' ou 'sales office' key.
Your commercials are linked with these objects in master data? If no, create the link.
After, in PFCG, create the key, as I said above, and done.
Rgs,
Fábio

Similar Messages

  • Issue regarding authorization CRM 5.0

    Hi Guys,
    Currently we are working in CRM 5.0. the issue we have defined a new Zrole and we assigned IS01(Problem and Solutions) this transaction should not allow the user to create or change always it should be in display mode.kindly suggest me what objects i need to include for the above transaction(IS01).
    Pls give your valuable inputs regarding this at the earliest possible. the solution provided for this will be rewarded with full points.
    Thanks in advance
    Prakash K

    Hi Mario,
    The XCM configurations will be required to access that URL. You need to set up JCO connection and many more things. You can refer the SAP Best Practices for this.
    Check this URL and download the configuration guide.
    [http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/C14_EN_DE.htm]
    Regards,
    Shalini Chauhan

  • Sap CRM 2007 Security related issue

    Hi All,
    I am working on SAP CRM 2007 security.
    I have scenario, which we are trying to fix.
    There are two users A and B.
    A is assigned to role X
    B is assigned to role y
    Business Partner 123 is created for user A
    Business Partner 456 is created for user B
    These Business Partners are assigned to Authorization Groups.
    See below:
    1)Authorization Group (LK01) is assigned to Business Partner --123.
    2) Authorization Group (LK02) is assigned to Business Partner --456
    3) Authorization groups LK01 is assigin to user A in PFCG role X
    4) Authorization groups LK02 is assigin to user B in PFCG role Y
    a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
    b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
    Note:
    1) Authorization Groups are assigned to BPs under the Control tab.
    2) These Auth Groups are assigned in Authorization Object in PFCG role.
    Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
    The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
    User A can open the Interaction History and edit the Service Order created using the BP 456.
    He can Edit the following in Service Order details:
    1) General Data Status (from created to complete), Contact person, Sale Rep name.
    2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
    3) Business Partner.
    However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group"  which is a
    good thing.
    I have tried to be precise, please let me know if you require more information.
    Regards,
    Dave.

    I suggest the following:
    Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
    In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
    I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
    kind regards
    Davy Pelssers
    SAP CRM/Security consultant

  • Can I use SPRO to configure SAP CRM web based application.

    Hi,
       I am just 5 days old in SAP solutions.
    I want to know if I can use SPRO (IMG) to configure master data and business processes pertaining to SAP CRM web based solution ?
    Regards,
    Diptendu.

    Hi Diptendu,
    You can indeed do some customizing in the SPRO regarding for example the PCUI (People Centric User Interface) of CRM.
    Within SPRO take CRM and afterwards in the Basic Functions you have some customizing to be done. You can also look at the cookbook for the PCUI, which you can find on the service.sap.com/crm-inst site.
    For the Interaction Webclient, there is a specific part for customizing in the SPRO under CRM --> Interaction Webclient.
    Hope this helps,
    Kind regards,
    Micha

  • How to consume a webservice from sap crm

    Hi All,
    How to consume and access an external webservice from sap crm?
    Suggest me.
    Regards,
    Sanjani
    Edited by: Sanjani on Dec 6, 2010 3:09 PM
    Edited by: Sanjani on Dec 10, 2010 1:08 PM

    Please check the wiki link mentioned below. It will help you to an extent.
    http://wiki.sdn.sap.com/wiki/display/CRM/CreatingWebServiceinSAP+CRM
    Rg,
    Harshit

  • Question regarding Authorizations in SAP CRM 7.0

    Hello,
    The problem is this:
    We have a client who will use two ways of accessing SAP CRM 7.0 data -
    1. CRM Web UI
    2. Mobile devices via standard SAP CRM BAPIs
    Now the situation is that the client wishes to control display authorizations based on the Business Role. Certain Business Roles can allow its User to see Accounts where the User is also Employee Responsible and certain other Business Roles can allow its User to see all those Accounts that are associated with that Role. In summary Business Roles control what an User can see.
    This has already been implemented for the CRM Web UI using the Access Control Engine (ACE).
    Now the questions are:
    1. How do we implement this for BAPI Access?
    2. Should we recreate what has been achieved by ACE, via PFCG Authorization Profiles?
    3. Can we not reuse what has been done by ACE?
    4. What are the runtime APIs that allow somebody to use the authorization checks of ACE?
    5. Does the standard Function Module CRM_ORDER_CHECK_AUTHORITY_ACE help in this regard?
    Any help here will be greatly appreciated. Please let me know if you need any clarifications.
    Thanks in advance.
    Best regards,
    Sudhi

    Hello,
    Normally, some notes are recommended in addition to the current support package implementation because they were developed to solve any known issues. These known issues occurred as side effect of any note which belongs to the implemented support package.
    If you take a look at older release notes, you will see the same.
    This is a part of implementation stack.
    1345085  SAP SRM 7.0 SP Stack 04 (09/2009):Release & Information Note 
    1365574  SAP SRM 7.0 SP Stack 05 (12/2009):Release & Information Note   
    1436687  SAP SRM 7.0 SP Stack 06 (03/2010):Release & Information Note 
    Kind regards,
    Ricardo

  • S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

    We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
    After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
    In SAP Note Nr. 1367944 we read:
    "It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
    authorization because it is needed by the Web Client Framework.
    The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
    be assigned to every user."
    "This dependency has been removed in CRM 7.0."
    Do we need to install some other SAP Notes at SAP CRM 7.0?
    Many thanks for advices!
    Handri Gunawan

    Hi Handri,
    I asked my collegue here, who created the note.
    The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
    The error that you have might occur because of another reason.
    Could you track the call stack of this exception?
    And send me back the call stack?
    Regards,
    Steve

  • ICSS: authorization in SAP CRM 7.0

    Hello Experts,
    Is it possible to restrict via authorization acces to diffrent types of transaction in ICSS in SAP CRM 7.0? For example some clients can have acces to complaints, some to service request and some for both.
    Regards
    Piotr

    Of course, you can. If you are creating the Z: roles for SAP_CRM_ECO_ISE_WU_B2B, then in this role, in the CRM Component, there is an authorization object called CRM_ORD_PR and a field name PR_TYPE. You can go an change the individual users with access to different transaction types or create Z: object or Z:role for each group as you wish. Use the field name ACTVT to control the access to the transaction type.
    Please note, there may still be some discrepancies in the search selection in the ICSS. Though you may want to restrict the user to not to access "Complaints", the restriction may work at the transaction level, but not at the search level. You may still see "Complaint" object in the Search dropdown list.  I am not sure if SAP has covered all the features of ICSS to abide by this role.

  • Issue in Migrating Attachments from Siebel to SAP CRM

    Hi All,
    We are doing Data Migration for Attachments into SAP CRM from Siebel. and have an issue for migrated attachments showing blank pages while opening in SAP CRM.
    We  have used all the formats of converting the data into binary and loading the attachments from Application Server.
    But the PDF/File open with blank pages.  The no. of pages in the original attachment and the migrated file from application server matches.
    May i know the best approach of meeting the above Requirement .. Its prioritized issue !!
    Thanks a lot !!

    Go to sm58-->Select IDOC_INBOUND_ASYNCHRONOUS this function module, in menu mar select edit--> execute LUW.
    or take help from sap basis team, can you please check user in the source system have authorizations profile. 'S_BI-WX_RFC' for this u can refer sap note :150315.
    if you need more information refer this document:
    How to check a BW - SAP source system connection - SAP NetWeaver Business Warehouse - SCN Wiki

  • Authorizations SAP  CRM 7.0

    Hello experts,
    I have doubts about the authorization in SAP CRM 7.0.
    The issue is, our commercials in the system should see only their customers,  the system will know who are their customers by the relationships.
    So we want user to see only BPs who have a relationship with the user.
    I have been investigating and I have found the ACE functionality ( Access Control Engine)  It seen ACE meets our requirements but  I am not sure.
    It is possible to use ACE in CRM 7.0? I ask it because I have read lots of information about the use of ACE in CRM with EP (CRM in portal) and I know it is not possible to use ACE on SAP Gui, so I am not sure if it is possible to use it on CRM 7.0.
    Also I am not sure whether I can covert requirements ( showing BP base on relationship with the employee), by using other functionality of CRM such as PFCG authorization?
    Thank you very much in advance.

    Hi Luis,
    You need to create a authorization object with 'sales rep' ou 'sales office' key.
    Your commercials are linked with these objects in master data? If no, create the link.
    After, in PFCG, create the key, as I said above, and done.
    Rgs,
    Fábio

  • Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

    Gurus,
    I am facing an issue regarding SAP TPM IP ( HANA)
    I have 3 Infoproviders
    Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
    Issue is  Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
    I tried debugging it and found it is trying to read   i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
    The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated.  So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
    Can any one help,it would be really help.
    Thanks
    Ashok

    Hello Gregor,
    On the launch of planning layout it throws an error message:
    Planning is not possible RSCRM_IMP_CORE008.
    When I debugged, i got to a point wherein
    particular Real Time Planning DSO is
    not getting retrieved under the MultiProivder in below class.
    Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
    returning the real time Info-Provider Name(i.e. Planning DSO)
    underlyingthe Multiprovider.
    I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
    Let me know, if you have any pointers on this topic.
    Thanks,
    Jomy

  • SAP QM Issues regarding follow-up action after Usage Decision

    Dear Gurus -
    Kindly need your expertise to resolve these issues regarding follow-up action.
    1. After taking the UD i need to trigger the follow-up action to send an email with the long text to a group of people. As per standard SAP the email goes to the person taking the UD. Kindly can some one explain what & where do i need to make the changes. Also please let me know what is the customized Email ID table where mail ID's will be stored which fuction module can extract.
    2. Can i also use the same functionality for partial lots during inprocess inspection. I need to send an email to a group in case the valuation is rejected for that operation.
    Any response is highly appreciated.
    Thank You.
    Edited by: sunil t on Jan 6, 2010 7:03 PM

    Hi
    Please go through my recent thread
    Incomming Inspection Auto mail if Rejected
    Regards
    Sujit

  • Profit center issue at the time billing  from SAP CRM

    Hi,
    we are using SAPR/3 4.7 & SAP CRM 5.0.
    we are creating service orders in CRM .
    After completion of service order we are doing billing due list & billing in SAP CRM. Then we are releasing billing document to R/3.
    Here problem is i dont have profit center field in SAP CRM for teh Service Product.
    at the time of the releasing teh billing document  system is picking teh dummy profit cenetr .
    But i need to post teh billing document  for teh respective profit center.
    Can you help some body.
    Regards
    Chandra

    See Note 386391
    The CRM Server is connected to an R/3 System that can be used to map Controlling and Profit Center Accounting. This note describes how the profit center is determined in the CRM integration.
    In the sales process and in service processing, the profit center is determined during the replication into the R/3 System and is stored in the translator.

  • Issue with special characters in SAP CRM ICSS application.

    Hi ,
    I have issue with the special character in CRM web application.
    1. In CRM IC Webclient application(5.0) . i am copying and pasting some special characters in the description of the service request document. then this is saving the character as it is.
    But when i am opening the same service request in SAP CRM  ICSS(Internet Customer Self-Service) application, then the special characters are converting to different characters.
    I am not sure whether this is the right forum for this or not.
    Can anyone please suggest how can i correct this. Or is there any standard solution to handle the special characters in ICSS.
    Thanks
    Sudhansu

    misunderstood =/
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    it's in output but what is data in database ?
    sorry but without knowing about source data for forming the xml i haven't ideas about your problem
    in db it's "TM " or "™" or ... ?
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    Something like XAE or "K" after PAY Value in the xml tag and continued the text value.  (Tag value is not getting copied exactly here - i am sorry for that )
    that's ok. i need to see the problem not the data as is
    Expected (output):  "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
    as super scripted in xml?
    as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
    Designing XSL Subtemplates - 11g Release 1 (11.1.1)

  • Regarding Extracting Data from SAP CRM

    Hi,
    1) What are steps to extract data fron  SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
    2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
        Can anybody please let me know the answers for these ..........
    Thanks in Advance,
      Sowji
    [email protected]

    Hi Sowjanya,
    Pls ch this link:
    regarding bw crm extraction
    CRM extraction
    CRM Extraction
    http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
    http://help.sap.com/bp_biv135/html/bw.htm
    http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    http://help.sap.com/bp_biv235/BI_EN/index.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
    http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
    Steps:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Datasources used in CRM-BW extraction are:
    0crm_sales_act_1,
    0BBP_STSMA_TEXT
    0CRMFOCST_TEXT
    0CRM_ACCPLN_ATTR
    0CRM_ACCPLN_TEXT
    0CRM_BILL_BLCK_TEXT
    0CRM_CANC_PARTY_TEX
    0CRM_CANRSN_TEXT
    0CRM_CATEGORY_ATTR
    0CRM_CATEGORY_TEXT
    0CRM_CLASS_TEXT
    0CRM_DECOTP_TEXT
    0CRM_DECO_TEXT
    0CRM_DIRECT_TXT
    0CRM_ECROPT_TEXT
    0CRM_FINCLASS_TEXT
    0CRM_ITM_OBJ_TYPE_T
    0CRM_ITM_TYPE_TEXT
    0CRM_JRGUID_TEXT
    0CRM_OBJ_TYPE_TEXT
    0CRM_OPGUID_TEXT
    There many more!
    Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
    *pls search SDN For more info*
    *pls assign points if info is useful*
    Regards
    CSM reddy

Maybe you are looking for