SAP CRM IDoc with errors added

Hi Experts,
I am facing some issues related to IDoc processing.The errors I am facing while IDoc processing are as follows:
1)E0(332) : EDI: Partner profile not available with IDoc status 56 & Idoc number 53
2)HRMD_ABA with IDoc status 52 & IDoc number 1
                       5-(000) : HR: ALE inbound processing for HR master data (Idoc No1)
3)HRMD_ABA 22 with Idoc number 22
                       B1(005) : & &, &, &.
                             No filters, Fields converted, No version change. (Idoc No 22)
Kindly provide me the solution through which I would be able to rectify the failed Idocs.
Thanks
Warm Regards
Vineet Joshi

Hi Vineet,
Maintain Inbound/Outbound partner profile using tcode WE20.
Thanks,
Balaji P.

Similar Messages

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

SAP CRM Integration with lotus notes & blackberry (Mobile application) ?

Dear Experts,
Can any one pls explain me rough step in SAP CRM Integration with lotus notes & blackberry (Mobile application) ! I dont want detailed steps but pls explain me some important steps for this integration. Also pls tell me which standard SAP document i hve to refer for it !
As i am totally new to such integraion. pls help me out of this !!!! Helpful answer will be rewarded with full points.
Regards,
Amol Tambe.

Hi Amol Tambe,
Please refer the following SDN threads to find more information about SAP CRM and Lotus notes integration:
Re: Integration of SAP CRM 7.0 with Lotus
Re: Need the connectivity between CRM and Lotus Notes.
However, the above discussion is for CRM online and Lotus notes integration.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 9:41 AM

CRM orders with error "Do not enter a business agreement for sold-to party"

Dear SDN'ler,
after creating orders in SAP CRM via ISA (CRM 4.0) and uploading them to R/3 all orders are created successfully in R/3 but an error message is sent back to SAP CRM in case of ALL orders.
Error message is the following:
"Do not enter a business agreement for sold-to party xyz"
Message no. CRM_BILLING011
Diagnosis
The field "FI-CA active" is not selected for the sold-to party 6000201 in the business master record. Since the business agreement is used in the component FI-CA, excluding the control of processes, it makes sense to enter a business agreement.
Procedure
Delete the entered business agreement.
==> Could someone please give me some more information about the mentioned "business agreement"? Where do I find field "FI-CA active" (in R/3 or CRM customer master data?)?
==> And how can I eliminate this error message for CRM orders in SAP CRM?
Thanks a lot.
Best Regards,
Rainer Gryschka

Please check the customising setting under following path:
SPRO --> Customer Relationship Management --> Master Data --> Business Partner -- > Business Agreement --> Define Basic Settings
Alternatively you may also check following customisation table using SM30 --> CRMC_BUAG_ACTV

SAP CRM integration with SAP R/3 using Xi

Hi All,
I am planning to us SAP XI to integrate PEOPLESOFT SYTEM TO SAP CRM .
This is the Scenario
 File adaptor xif adaptor
Peoplesoft-----> XI ---> sap crm.
1)Is this the best practice to integrate PEOPLESOFT SYTEM and SAP CRM using XI?
2) Please comment how and with best option to integrate and also comment on cost factor ?.
Please Help me.....
Thanks and Regards,
chandra.kotha

1)Is this the best practice to integrate PEOPLESOFT SYTEM and SAP CRM using XI?
It is not, but it is cost effective.
2) Please comment how and with best option to integrate and also comment on cost factor ?.
iWay has an PeopleSoft adapter, but you need to buy the license (not sure how much it costs, some adapters were charged based on the data volume and some were charged straight per adapter depends how you negotiate).
https://service.sap.com/~sapidb/011000358700009396312004E/index.htm#PeopleSoft
regards
Shravan

Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

File to Idoc with error in trfc

Hello,
I have a scenario like
File -> XI -> (idoc) R3
The scenario works fine but yesterday I had a problem with the user in the rfc destination(pwd wrong) which is used for the idoc-adapter. In the sxmb_Moni and the RWB the msg. got an success flag/info but it was not delivered to the r3 because the rfc-destintion could not work.
I know that the idoc-adapter is not part of the adapter-engine and my understanding was that the adapter send his status back to the integration engine. But in this cause I got no feedback from the adapter. I think this is not Ok or I am wrong ?
Regards Jami

Hi Jami,
The reason is simple.....the message is sent from the integration server to the adapter engine which was susessful.but what went wrong is the rfc destination being wrong in the receiver adapter which is not known to the integration server. So in simple words, if things work fine in your integration server then it will not throw an error in your sxmb_moni. So had there been a problem between the message transfer from the integration engine to the adapter engine then it would have surely given you an error in your sxmb_moni(for example you specify some wrong parameters while configuring your receiver IDOC adapter).
But in this case since we dont have an IDOC adapter in the component monitoring (it has adapters which are in the JAVA stack only but IDOC adapter is in the ABAP stack)we can see the error in SM58 only.
I hope this answers your question fully. If any other doubts regarding the same pls do ask me.
Regards,
Abhy
Message was edited by: Abhy Thomas

Idoc with error message when coming from middleware but not in we19

Hi Experts
I am facing a very strange issue !
I have a Z - Idoc type and corresponding inbound function module for creating schedule lines i.e. doing something what me38 does.
When my middleware i.e. Mercator Websphere is sending the idocs, they fail with the error message in the status record as
Field EKET-MENGE (19) does not exist in the screen SAPMM06E 1117.
But when I try processing the same idoc using we19, the scheduling lines are created and the schedule agreement is changed.
Is there any difference between we19 and when idocs come from the middleware ?
Points would be rewareded if useful answers received.
Regards
Shubhankar

Well i think that the problem is with your BDC. there is an option to use standard size in BDC. I think your table control falls short of 19 rows in your program. Please see the thread below and incorporate the same changes in your BDC. I think u might need to record the BDC again.
Re: BDC tabel control for QE01
DATA OPT TYPE CTU_PARAMS.
OPT-DEFSIZE = 'X'.
CALL TRANSACTION 'FB01' USING ITAB OPTIONS FROM OPT.

How to edit data from an IDOC with errors and reprocess it

Hi,
We are working with SAP XI for communicate with an external systems by files (external) to IDOCS (SAP R/3).
Sometimes we need to edit the data from an inbound IDOC, because the external system generates wrong information and that can't be processed directly.
We had seen posts like:
But we wanna to do it with no ABAP editor.
¿Can we change the data from the IDOC in other way (transaction) and reprocess it?
We tried with /WE05, pushing EDIT button, but can't edit the data from the IDOC.
Thanks in advance for your help
Regards,
Federico Martin

Keep Looking at forums i founded:
change idoc data
To change the Inbound IDoc,
1)Go to WE05/WE02, enter the Inbound IDoc number and Execute.
2)Double Click on the segment (Page Icon) where you want to change the Data.
3)In the Screen 'Display data record for IDoc' , Go to menu 'Data record' and click on 'Display - > Change'. Then it display a popup information 'Changes to the IDoc are written to the database' , then press enter .
To Process the Edited Inbound Idoc , execute the program 'RBDAGAIE' in SE38 and enter the IDoc number.
Thanks
Sekhar
AND
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Also if you have something to say about it will be appreciated
thanks

IDoc with error when trying to update two materials with FM: CSAP_MAT_BOM_MAINTAIN.

Hi
In my current project I am facing the below issue.
In client MDM team is creating the master data. The BOM master data also creating through MDM only. The function module used is CSAP_MAT_BOM_MAINTAIN. When user trying to update the two extra BOM line items getting an error " Error while saving the BOM."
In SLG1 transaction we observed that the IDOC is trying to change the header level data. After analyzing I got some conclusion that
while BOM creation header level material and all components are created with change number reference. When the user trying to update two extra line items with new change number system giving error msg as idoc trying to change header level data. As my knowledge with FM:CSAP_MAT_BOM_MAINTAIN no changes possible for header. I came to conclusion as header is updated with a change number while creation and when we changing second time with new change number, system not able to replace the old change number with new change number.
To correct this IDOC what steps i can perform? Is it possible to reprocess this IDOC by changing any field values like MSGFN.
Please suggest what solution we can provide to reprocess this IDOC.
Regards
Kesava

Hi Rupesh
Thanks for the replay.
Here the user created the BOM with the same FM:CSAP_MAT_BOM_MAINTAIN but he created with change number refernce. This change number is updated in header. Later he wants to add some extra components to this BOM with the same FM:CSAP_MAT_BOM_MAINTAIN and he entered new change number second time to do the change. Then system giving an error status for this IDOC.Then if we check in SLG1 the error message is we are trying to change header fields which is not possible " The BOM header can only be displayed, Your entries were ingored". How can we reprocess this IDOC.
Regards
Kesava

SAP CRM IDoc with errors added

Similar Messages

Maybe you are looking for