SAP CRM integration with SAP R/3 using Xi

Hi All,
I am planning to us SAP XI to integrate PEOPLESOFT SYTEM TO SAP CRM .
This is the Scenario
                 File adaptor     xif adaptor
Peoplesoft----->     XI      --->    sap crm.
1)Is this the best practice to integrate PEOPLESOFT SYTEM   and SAP CRM using XI?
2) Please comment how and with best option to integrate and also comment on cost factor ?.
Please Help me.....
Thanks and Regards,
chandra.kotha

<i>1)Is this the best practice to integrate PEOPLESOFT SYTEM and SAP CRM using XI?</i>
It is not, but it is cost effective.
<i>2) Please comment how and with best option to integrate and also comment on cost factor ?.</i>
iWay has an PeopleSoft adapter, but you need to buy the license (not sure how much it costs, some adapters were charged based on the data volume and some were charged straight per adapter depends how you negotiate).
https://service.sap.com/~sapidb/011000358700009396312004E/index.htm#PeopleSoft
regards
Shravan

Similar Messages

SAP CRM Integration with lotus notes & blackberry (Mobile application) ?

Dear Experts,
Can any one pls explain me rough step in SAP CRM Integration with lotus notes & blackberry (Mobile application) ! I dont want detailed steps but pls explain me some important steps for this integration. Also pls tell me which standard SAP document i hve to refer for it !
As i am totally new to such integraion. pls help me out of this !!!! Helpful answer will be rewarded with full points.
Regards,
Amol Tambe.

Hi Amol Tambe,
Please refer the following SDN threads to find more information about SAP CRM and Lotus notes integration:
Re: Integration of SAP CRM 7.0 with Lotus
Re: Need the connectivity between CRM and Lotus Notes.
However, the above discussion is for CRM online and Lotus notes integration.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 9:41 AM

SAP Jam Integration With SAP Cloud For Customer

Hi Experts,
Can anyone have idea about how we can integrate the SAP JAM with SAP Cloud For Customer .
Any document or any guide please share with me.
Appreciate your help.
Many Thanks,
Mithun

Hi Srivatsava,
I am getting the error while creating the Group under the SAP Cloud Opportunity
Sales - > Opportunity -> Group Tab -> Create New Group
Kindly check the below screen for same.
can you please help me what step require to solve this issue.
Waiting for you response.
Many Thanks
Mithun

MS Word integration with SAP CRM: can a PDF be created from the MS Word doc

21/11
Gurus,
I know have a better understanding of the topic but still have 2 open questions.
I now know that StreamServe cannot read .DOC files but can read and work with .PDF files.
Since we are in a SAP forum and not a StreamServe forum,
1/ I am wondering if SAP CRM 2007 can convert the MS Word generated and populated documents into .PDF. Possibly immediatly.
2/ Can the MS Word generated and populated documents be saved by SAP CRM 2007 as .XML files?
Thanks again.
Dear All,
On my project, there is a requirement to generate ad-hoc and amendable letters in CRM (2007).
We might have +150 letters so I am thinking about using MS Word integration with SAP CRM to deliver this.
With SAP CRM 2007, I understand that it is indeed possible to generate WebServices that will then be consumed by Word templates through the mail merge functionality. So agents will not have to enter BP name, address and so on. All this can be done by configuration which is great.
My point of concern is how to integrate this design to StreamServe for printing purpose (we do not want to go into local printing)
Can StreamServe collects the Word generated document?
Should this Word document be converted as PDF before or can StreamServe do it?
Should StreamServe exploits the XML contents within the Word generated document?
Thanks for your help and insights about this.
Brice.
Edited by: Brice Vialle on Nov 21, 2008 9:26 PM
Edited by: Brice Vialle on Nov 21, 2008 9:34 PM

Hi Chris,
    Your advice helps me a lot, thank you.
    I upload an XML-Format template Word Doc to server as a MIME Object.
    When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
   For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
   then translate it to string, I got the XML-format content, it's great!
   However, after the first time, when I input any new contents in MS Word in Web Dynpro,
   no matter I execute "Ctrl + S" or click the "savedocument" button,
   when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
   I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
   SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
   My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
   core source code is as:
   clear itab.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER = lv_datas
    IMPORTING
      OUTPUT_LENGTH = lv_length
    TABLES
      binary_tab = itab.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
    EXPORTING
      input_length = lv_length
      mimetype = 'text/plain; charset=utf-8'
    IMPORTING
      text_buffer = lv_datas_string
      output_length = lv_data_len
    TABLES
      binary_tab = itab.
    Can you give me some advice?
Best Regards,
Derek

Melita Predictive Dialer Integration with SAP CRM WebIC

Hello All,
Does any one have any information about "Melita Predictive Dialer" integration with SAP CRM Web IC.
Please let me know.
Thanks
Amar Reddy

Hello Amar,
I am only aware of a few customers who have integrated predictive dialing into the Interaction Center, and those customers all used Genesys or Avaya. I'm not aware of anyone who has done this with Melita yet.
By the way, I wrote a high-level Blog on the topic of automated dialing available on PBX:
Link:Does Automated Outbound Dialing Fit in Your CRM / Call Center Strategy?
Warm regards,
John

Integrating with SAP CRM / SAP ECC apps with SMP 3.0

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

External product catalog integration with SAP CRM

Hi Forum,
I want to integrate a third party Java based product catalog with SAP CRM.
Currently, ISA is being used as the front-end.The CRM has a product catalog which is being used.
In place of this I want to add an external product catalog.
This is for a B2C shopping website. The user will browse through the external catalog and the selected products should be added to the shopping basket of ISA.
I'm aware that the Open Catalog Interface (OCI) is used for this purpose in B2B using SRM server.
Is there a similar interface for B2C applications?
Aditya Karajgi

Hi Pratik,
I dont think you understood my question.
What I want to implement is something like Open Catalog Interface (OCI) which is used in B2B implementations.
The catalog will be created by an open source content management system.
Product categories will be created and maintained using this system.
Users will browse the catalog and select products.
These selected products will be added to the shopping basket in Webshop.
We dont want to get into the complexities of using JCo or IDocs for this.
There should be some interface which is similar to OCI for B2C applications.
Thanks and waiting for ur response.
Aditya

Need details on Outlook integration with SAP CRM

Need details on Outlook integration with SAP CRM

As Robert has stated there is plenty of information if you would have done a search first or looked at the CRM wiki.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/home
Please review the rules of engagement before posting further.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Due to this thread, being way too vague and a duplicate question, I'm now locking it.
Thank you,
Stephen
CRM Forum Moderator

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

How can SMART METER Technology be integrated with SAP ISU system?

At present the SMART METER technology is integrated with SAP ISU through a third party vendor. The idocs are sent to a third party and the readings are downloaded and sent back in idoc segments.
How can the integration be done without the third party intervention.

HI
SAP XI needs to be used for 3rd party intervention to send and recive idocs..
or there are some thrid party softwareslike MDUS ,meter data utilisation system.which wil be again a interface between sap and ami system
so basically its like sap syst--sap xi3rd patry 4 ami comapnyami system
kr
raj

MM Configuration for integration with SAP SNC

Hi,
I need to make MM configuration required to support PO collaboration and SMI process integrating with SAP SNC.
ANy kind of information would be very much helpdull
Thanks
Vikas

Hi Vikas,
MM configuration for PO collaboration is depend upon the your requirements. e.g. You want to upload the confirmations send by the supplier from SNC web UI to your R/3 system you have to use confirmation control key while creating PO in R/3 and make corresponding supplier confirmation control either optional or mandatory in SNC configuration. Default provided by SAP is optional.
Remember supplier can create confirmations only if ther either optional or mandatory.
Regards
Pravin

Weighing Scale integration with SAP ( Packing Station)

Hi All,
    We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
    I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
    Would you plz help me with some work-arounds ...???
Regards
Jamna

Hi Folks,
    There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna

SAP E - Recruitment Integration with SAP PA ES Module

Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinM

Aswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna

Issues in BO integration with SAP EP

Hi All,
integration of SAP EP 7 and BOexi3.1.
My requirement is to show the BO WEBI reports in portal. My scenario is like directly connecting to BO from EP using SSO with out connecting to BI.
For Bo,Only data is comming from BI , Roles and user creation are saperately is done in BO only. Is it possible to connect do sso between SAP EP and BO with out connecting to BI.
BO is not using any Active Directory., users and roles are created in its own database and Portal users are stored in ume data base. how to achive sso between SAP EP and BO.
Thanks
Rajeev

Hi,
Go through the below link which gives great details on the BOXI integration with SAP EP.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x
You should be able to get the SSO details also here.
Regards,
Noor.

Sms integration with sap b1

HI to all,
    can it possible if sms integration with sap business one. means if i create a/r invoice if i add the document automaticlly send sms to the customer in that sms following matter to be send
invoice number,posting date,due date,invoice amount.can it possible .if yes then what is requirement for that.pls reply i will waiting for your reply...
Regards,
vishal.

hi
1.Create class library in Visual Studio 2005 C# Express Edition create assembley SQLCore
Write code:
using System;
using System.IO;
using System.Text;
using System.Net;
namespace SQLCore
    public static class SMS
        public static void PlusSend(string Sender, string Recipient, string Message)
            string Destination = "http://www.text.plusgsm.pl/sms/sendsms.php";
            string Data = "?tprefix=" + Recipient.Substring(0, 3) + "&numer=" + Recipient + "&odkogo=" + Sender + "&termin=0&tekst=" + Message + "&godz=00&min=00";
            SMS.PostStringToURI(Destination, Data);
        private static void PostStringToURI(string URI, string String)
            byte[] Bytes = Encoding.UTF8.GetBytes(String);
            HttpWebRequest Request = (HttpWebRequest)WebRequest.Create(URI);
            Request.Method = "POST";
            Request.ContentLength = Bytes.Length;
            Request.ContentType = "application/x-www-form-urlencoded";
            Stream RequestStream = Request.GetRequestStream();
            RequestStream.Write(Bytes, 0, Bytes.Length);
            HttpWebResponse Response = (HttpWebResponse)Request.GetResponse();
            if (Response.StatusCode != HttpStatusCode.OK)
                string Message = String.Format(
                "POST failed. Response staus {0}.",
                Response.StatusCode);
                throw new ApplicationException(Message);
for your localization you have to find your own sms gateway.
2.Compile project .
3.Copy dll to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn
4. Set SETTRUSTWORTHY on true using
ALTER DATABASE databasename SETTRUSTWORTHYON;
go;
[more info about SETTRUSTWORTHY|http://msdn2.microsoft.com/en-us/library/ms187861.aspx ]
5.Create Assembly for your dll.
CREATE ASSEMBLY SQLCore
FROM 'C:\Program Files\Microsoft SQLServer\MSSQL.1\MSSQL\Binn\SQLCore.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
6. Create Procedure
CREATE PROCEDURE dbo.[PlusSend](@Sender nvarchar(max), @Recipient nvarchar(max), Message nvarchar(max))
AS EXTERNAL NAME SQLCore.[SQLCore.SMS].PlusSend
go;
7 .Fially execute using
EXECUTE dbo.[PlusSend]('SENDER'','PHONE NUMBER','Message')
Insert it in transaction notification.
Hope it helps.

SAP CRM integration with SAP R/3 using Xi

Similar Messages

Maybe you are looking for