SAP CRM middleware problem (sysfail ) The current application has triggered a termination with short dump
i'm having a proplem during starting initial load although i'm using the best practice documents C71 and B09 and all the configration was done by them .... could any one help ??
this is the first dump error for my RFCUSER on the ECC server
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program SAPLCRMC
Application Component CA
Date and Time 05.03.2014 17:50:47
Short Text
The current application has triggered a termination with a short dump.
What happened?
The current application program has detected a situation that should
not occur. A termination with short dump has therefore been triggered
by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
Error analysis
Short text of the error message:
See SAP Note 1498111
Long text of the error message:
Diagnosis
System Response
Procedure
Refer to the SAP Note that was mentioned.
Procedure for System Administration
Technical information about the message:
Message class....... C_
Number.............. 330
Variable 1.......... 1498111
Variable 2..........
Variable 3..........
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"MESSAGE_TYPE_X"
"SAPLCRMC" bzw. LCRMCF0C
"CHECK_CRMATAB"
If you cannot solve the problem yourself, please send the following
information to SAP:
1. This description of the problem (short dump)
To do this, choose System -> List -> Save -> Local File (unconverted)
on the screen you are in now.
2. A suitable system log
To do this, call the system log in transaction SM21. Restrict the time
interval to ten minutes before the short dump and five minutes after
it. In the display, choose System -> List -> Save -> Local File
(unconverted).
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
the Editor.
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
thanks
Similar Messages
-
When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?
That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with. -
Node id does not exist for the current application server id
Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks -
My new IPAD 2.0 keeps freezing on the current application. When I hit the button on the IPAD it does not go back to the icon "desktop"....I have restarted several times and reset my settings and it is still happening. HELP.
You'll have more success getting an answer to your questions, if you post them in the appropriate discussion board....
https://discussions.apple.com/community/ipod/ipod_touch -
Node id does not exist for the current application server id on forms
Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
MilanI already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein -
I am facing a caching problem in the Web-Application that I've developed us
Dear Friends,
I am facing a caching problem in the Web-Application that I've developed using Java/JSP/Servlet.
Problem Description: In this application when a hyperlink is clicked it is supposed to go the Handling Servlet and then servlet will fetch the data (using DAO layer) and will store in the session. After this the servlet will forward the request to the view JSP to present the data. The JSP access the object stored in the session and displays the data.
However, when the link is clicked second time then the request is not received by our servlet and the cached(prev data) page is shown. If we refresh the page then request come to the servlet and we get correct data. But as you will also agree that we don't want the users to refresh the page again and again to get the updated data.
We've included these lines in JSPs also but it does no good:
<%
response.setHeader("Expires", "0");
response.setHeader("Cache-Control" ,"no-cache, must-revalidate");
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control","no-store");
%>
Request you to please give a solution for the same.
Thanks & Regards,
MohanHowever, when the link is clicked second time then the request is not received by our servlet Impossible mate.. can you show your code. You sure there are no javascript errors ?
Why dont you just remove your object from the session after displaying the data from it and see if your page "automatically" hits the servlet when the link is clicked.
cheers..
S -
I am getting error Error in calling up function 'BAPI_APOATP_CHECK' in APO server The current application triggered a termination
when triggering for gatp.Hi Virender,
This error can be experienced due to many reasons. based on my experience below reasons can cause this issue.
1) If you are using allocation check if allocation is correctly set.
2) In case you are using custom enhancements / user exits (in SD / GATP / CIF) check if any of them, causing this issue.
In my case correction of allocation setup could resolve this issue, so check what is the reason in your case.
Rgds
Sourabh -
To get the Current Application ID
Hello,
Is there any standard function to get the current application id ?
Thanks
GeethaIf the form is built using template.fmb, that should be automatically taken care of I will be surprised if that is not). If that is not the case and if you launching the form using either custom.pll or personalization, can you read the form function where it is called from (most probably in the parameters) and get its application from fnd_form_functions.
Thanks
Nagamohan -
I have a problem on the MUSE application. I changed my reference Saturday mail address. Since the operation, I can send my site project on Catalyst operating until then. A dialog box asking me to enter my password Adobe Business Catalyst I do not know . I fill the field with my Adobe ID without success. I then changed my password ID password , thinking the problem. Unfortunately it remains. What can I do? Thank you .
Hi and Welcome to the Community!
If you have BES, then you need to talk to your BES admin for the proper method to activate your BB on BES.
If you do not have BES, then you should not even be going into anything related to Enterprise email...instead, you should see Internet or Personal email setup in addition to Enterprise. If you do not see Internet or Personal, then your device is not properly activated by your mobile service provider for BIS-level Internet/Personal email services...contact them for assistance.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I'm trying to load updated Firefox 4, when the blue drop down menu with the firefox icon and Applications folder icon (prompt to drag firefox icon to apps folder) the firefox icon has a white circle with a line through (like a "do not enter" symbol)
Hello puma1552,
Are you referring to the *Do Not Disconnect* screen display while your iPod is plugged into and syncing with iTunes? Check out this Apple support document for its meaning and why you are receiving this icon. This icon always appears when you are syncing your iPod with iTunes. It's basically a warning message telling you that the iPod is currently in use and should not be removed.
http://support.apple.com/kb/HT1378
B-rock -
Hi,
i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
face this kind of error, so what will be the way to resolve this?
Appreciated!event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
2. Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
3. Click on Permissions button in the ribbon area.
4. Add the application pool account used by your web application and give it ‘full Access to Term Store’
5. Click OK.
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.Welcome to the discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade. -
Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine,
but happens now that i need to have a xsd and wsdl with business names and not table names, invented to create a xsd and wsdl file in jdeveloper
and then went to eclipse and tried t xquery tranformation, but when i add the replace in the message flow in the filed in Variable : body and Expression i look for the xquery and in the binding trying to put
$body/input parameter, get the following error [RouteNode1, Replace action] XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.
what im doing wrong or its configuration
thanks in advance soniathanks
ok have created a table with only in column varchar2(1)
then the type object and the procedure to insert it works the proxy in the osb if i test it inserts
now in jdeveloper i created an xml file with
<?xml version="1.0" encoding="windows-1252" ?>
<vessel>
<barco>a</barco>
</vessel>
then i created a xsd based on this xml, and a wsdl based on the xsd
in eclipse created a xquery transformation and selected source as the xsd created in adf and target the xsd input parameter, dont know why in the purple ball of the input parameter it puts a ?, an a f.
then in the proxy xpath not writing anything in variable body and in the expression select the xquery and in binding select the parameter -
Query to get objects list for which the current user has 'SELECT' privilege
Hi,
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
From these findings, I have composed below query
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
Have I got user's all prvilege details? should I look some other system views?
How to exclude system table privileges details?
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
What about Public role in Oracle? Should I consider public role here?
Oracel Version :11g
I want make this query to work on Oracle 8i or above version
Thanks>
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
>
You will need a hierarchical query to do that.
Try this script for Listing privileges recursively for Oracle users
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html
Maybe you are looking for
-
my ipod touch 4g is not recognized in itunes nor does my comput recognize it !! HELP PLEASE... its not the chord
-
SAP E-Recruiting -- Application Groups
I delete application groups, no. What happen, to candidate applications that I assign to application group. I search SAP Help and this forum,no. I see no answer.
-
What's the best way to deal with Canon pf24 files?
I'm working on a project shot mainly with Canon DSLR footage (1080p, 24fps.) But now I would like to add some footage from a Canon Camcorder recording in AVCHD format. It would seem to make the most sence to shoot at 24fps, or as Canon calls it pf24.
-
Xerces and it's impact on Netbeans & Eclipse
I have a Mac Pro running 10.6.4 and a Macbook Air running the same. The base installations are pretty much identical. I've also got VMWare on the Pro. for running some legacy virtual machines. On the Air I can load, run and develop in both Eclipse an
-
Hi Have Mac pro, cinema screen sleeps on schedule, then won't wake up and locks me out of machine, have to hold power button till machine shuts down, then restart machine then ok, till the next time, has happened twice in last week, but never before,