Sap crm ui logoff link not working prpperly

Hello All,
in crm ic 7.0 when iam clicking on logoff which is located on the top right corner of the page it's taking to some page which contains this information
There is a new way of starting SAP CRM; adjust your favorites
You can use the following link:
http://crm7dev.xxxxxx.com:8000/sap/crm_logon?sap-client=150
For instructions on how to start CRM, see SAP Note 1173951.
For more information, contact your system administrator.
when I click on the link it's going to the logon page.
*My requirment is when i click on the logoff which is located on the top right corner of the page it should directly go to the logon page.I have tried by giving url's in the logoff link which is maintained in SPRO under Define Technical Profile.but it didn't worked.please help*

Hi Robert,
                  Thanks for the replying,
I have maintained the customizing in the technical profile (default) and I have assigned it to theh business role sales_admin.but it's not working
I tried this
                          when i left the feild logoffurl in technical profile(default) as empty and clicked on the logoff it is going to 'sap.com'.
and when i gave the gmail url it's going to the gmail.
***But when Iam tring with   this links in the logoffurl ***
http://crm7dev.xxxxxxx.com:8000/sap/bc/bsp/sap/crm_ui_frame/default.htm
/sap/bc/bsp/sap/crm_ui_frame/default.htm
http://crm7dev.xxxxxxx.com:8000/sap/crm_logon
it's not taking me to the sap logon page directly instead it's going to the page that has the below info as i have mentioned earlier
There is a new way of starting SAP CRM; adjust your favorites
You can use the following link:
http://crm7dev.xxxxx.com:8000/sap/crm_logon?sap-client=150
For instructions on how to start CRM, see SAP Note 1173951.
For more information, contact your system administrator.
when i click on the above link then it's taking me to the logon page.
Can please suggest me some url's format which would take me to the logon page(like
;http:/xxxxxxxxxxx)
Thanks for the help.

Similar Messages

SAP ESS ABAP Service links not working

Hi Experts,
I am setting up SAP ESS EHP5 with EP 7.3. The overview page is working but nothing happens when clicking on the service links, and this info message is generated for each click:
Deprecated scope of type SERVERSESSION_AT_LEAST_ONE_APP_SCOPE is used! Please replace the usage of scopes with new mechanism based on "Cross application session communication API".
The permission for root folder and system connection includes Everyone with end user right.
We installed all required packages and components as below and assigned a copy of the composite role SAP_EMPLOYEE_ESS_WDA_1 to the testing user (with country-specific roles removed except for Canada).
Business Package for Employee Self-Service (WDA) 1.50
Business Package for Common Parts 1.51
SAP ESS 633
PCUI_GP 633
2. SAP ERP Core Components (SAP ECC) 6.0 with the following extensions:
Human Resources Extension (EA-HR) 605
We are running ERP6 with EHP5 and EP 7.3.
Any suggestion is appreciated.
<< moved by moderator - check out the list of other forums on top of portal forum >>
Links to other forums
Edited by: Anja Engelhardt on Jan 20, 2012 3:38 PM

check below once:-
Re: Reg:Portal ess and mss links not opening in portal 7.3
Portal services not visible
Downloading and deploy ESS and MSS - Portal - SCN Wiki
How to determine the correct component combination in ESS WD JAVA - ERP Human Capital Management - SCN Wiki

SAP CRM Standard Product Search Not working for ATTR STR_SUPPL2

Hello Colleagues ,
Background :-
Each Product in SAP CRM has a location address .
Address has an attribute STR_SUPPL2 . This standard field is also a Query Parameter in Product Search Query.
When we use this Query Parameter STR_SUPPL2 , Search result in an Error Message with no result .
Technical Analysis :-
There is a Query Parameter named ST_SUPPL2 in the CRM Product Search ::ProdAdvancedSearchIndObjects .
When we use this Query Parameter an Error message Appears .
Search criteria LOCATION_ADDRESS.STR_SUPPL2 in scenario CL_COM_PRSEARCHSCENARIO_LOCAT not included in tool/filter LOCATION_ADDRESS STR_SUPPL2 CL_COM_PRSEARCHSCENARIO_LOCAT
X
I tried to find out the cause .Its mainly because SAP has coded in such a way to allow only few Location Address parameters in production search .
This can be viewed in the class :: CL_COM_PRSEARCHTOOL_LOCAT~DO_SEARCH .
There is a related OSS Note (1018099) as well ,but its valid for few Fields only .
We are already on CRM latest SP .
Client Requirement :-
Since STR_SUPPL2 is part of standard search criteria and my Client requires to consume this field in Product Search and Result .
Please if some one can help here .
MY DOUBTS :-
Query 1 :-
Should this be resolved by SAP and Shall i open an Incident ?
Query 2 :-
What BADI should i use if i need to write my own custom logic to implement search based on this field STR_SUPPL2 ?
OR
if there is an easier way to achieve this ?
Refer to the attached snapshots.
Regards
Nitin

Hello Samantak ,
Thanks for your Sol Proposal .
I checked Implementing COM_PRODUCT_SE .
But looks like after Implementing the Enhancement Spot , I have to Take care of the Complete Product Search myself .This is not the intension here .
Reason : CL_CRM_PRIL_ADVSEARCH_BASE~GET_RANGESEARCH_RESULT
CALL METHOD me->do_searchengine_search (Ignores all other Location Query Paramaters)
CALL METHOD me->do_database_range_search
I just need to enable 1 standard Field :: STR_SUPPL2 Seachable .
Any comments are welcome

Masthead header logoff link not working

Hi,
We created a theme for our masthead and assign it to our portal. However, when the logoff button is click it freeze and does not redirect the page back to the login page. Has anyone encountered this problem?
Regards,
Jin Bae

Hi Yoav,
can we use this URL with the UME property ume.logoff.redirect.url? Is the syntax of the following value correct? Do I miss something else to tell the system it is a URL in this case? Somehow it doesn`t work as given in the SAP note 696294 and the system always adds "\" infront of ":" after being saved, why?
ume.logoff.redirect.url=https\://its-services.de.kworld.kpmg.com/myhomepage.htm
Will you please give me a clue? Your help will be highly appreciated as my company needs this solution badly.
Thanks a lot in advance for your help.
Best regards
Tho

Links not working correctly in PCUI for CRM

Hi All,
We are implementing mySAP CRM 4.0 through PCUI on Portal
EP6 SP14.
I have integrated the CRM Business Package 60.2 in Portal.
Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we dont get the desired application opening.
When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
I have the screen shots with me. Any one responding can get the screen shots from me.
Thanks in Advance
Rohit

Rohit,
Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
Best Regards,
Bernard

Web Ui Link Not working

Hi Folks ,
My Web Ui link for crm 7.0 is not working. Can any one guide me - what would be the reasons r else let me know the right path to cross check . Do the needful. Thanks in Advance.
Amrita

Go throu the following post and you should be able to solve your problem: Re: CRM 2007 Steps for UI activation

Fresh Install HCM 9.1 but Links not working. Help please

Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

NAC OOB logoff feature not working

Hi all,
I've deployed NAC in L2 OOB VG mode with ADSSO and I'm trying to use the OOB logoff feature but it's not working. The VLAN change detect feature doesn't work either (I think the two problems might be related).
It will work if each user role is assigned a different auth/access VLAN pair but in my setup, everyone has a common auth vlan and separate role-based access vlans. Because of this, I have to use the IP refresh feature as well (this works fine).
I'm running Windows Vista and version 4.8.0 of the NAC software with version 4.8.1.5 of the agent
I checked the release notes and found that caveat CSCth60233 identifies this bug with the VLAN change detect with the workaround being to refresh the IP address automatically after being logged out. Does anyone know of a workaround for this problem to do this automatically? Is a solution for this problem in the works?
Also would anyone be able to help me with my OOB logoff feature not working? I've configured everything according to the documentation.
I appreciate your responses
~Xavier

Here are my configs if necessary. Tell me if anything else is needed.
User Management > User Roles
List of Roles
Edit Role
Traffic Control
Bandwidth
Schedule
Disable this role
Role Name
Role Description
Role Type
Normal Login Role Quarantine Role
*Max Sessions per User Account             ( Case-Insensitive Session Identifiers             )
(1 – 255; 0 for unlimited)
Retag Trusted-side Egress Traffic with VLAN (In-Band)
(0 – 4095, or leave it blank)(*This option has been deprecated, and it will be removed in upcoming releases)
*Out-of-Band User Role VLAN
VLAN ID VLAN Name                 (if left blank, it will default to the default access vlan             settings in the Port Profile)
*Bounce Switch Port After Login (OOB)
Enable               Disable               (This option is effective only when port profile is set to use it)
*Refresh IP After Login (OOB)
Enable               Disable               (This option only applies to L2 OOB Virtual Gateway with Role VLAN             as Access VLAN and switch port is NOT bounced after VLAN change)
*After Successful Login Redirect to
previously requested URL
this URL:
(e.g. http://www.cisco.com/)
Redirect Blocked Requests to
default access blocked page
this URL or HTML message:
*Show Logged-on Users
User info
Logout button
Enable Passive Re-assessment                          (To enable Passive Re-assessment for OOB Agent             connections, you must also enable the OOB Logoff option at             Device Management > Clean Access > General Setup > Agent Login.)
Re-assessment Interval
(Minimum of 60 minutes and maximum of 1440 minutes [24 hours])
Grace Timer
(Minimum of 5 minutes and maximum of 30 minutes)
Default action on failure
Continue Allow user to remediate Logoff user immediately
(*only applies to normal login role)
Device Management > Clean Access
Certified Devices
General Setup
Network Scanner
Clean Access Agent
Updates
            Web Login   · Agent Login
User Role
Unauthenticated Role(not common) role_engineer role_developer role_admin role_sales role_guest
Operating System
ALL WINDOWS_ALL WINDOWS_XP WINDOWS_VISTA_ALL WINDOWS_7_ALL MAC_ALL MAC_OSX LINUX FREEBSD SOLARIS_ALL SOLARIS_86 SOLARIS_SPARC UNIX VMS OS2 PALM
(By default, 'ALL' settings apply to all client operating systems if no OS-specific settings are specified.)
Enable OOB logoff for Windows NAC Agent and Mac OS X Agent        (This global option applies to all OOB CASs and user roles and enables Agent logout and heartbeat timers for OOB Agent connections. You must also enable this option for Passive Re-assessment to function with OOB Agent connections.)
Require use of Agent
(for Windows & Macintosh OSX only)
Agent Download Page Message (or URL):
           Network Security Notice: This network is protected by a Cisco NAC Appliance Agent, a component of the Cisco NAC Appliance Suite. The Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please use the Agent to log in to the network.
If you don't have the Agent software yet, download it by clicking the button below. After downloading the installation file, run it to complete the installation.
If you have already downloaded and installed the Agent, please close this window and right-click the Agent icon in the system tray and choose Login from the menu. Enter your usual network user name and password in the login window.
Require use of Cisco NAC Web Agent (for Windows only)
          Cisco NAC Web Agent Launch Page Message (or URL):
Network Security Notice: This network is protected by the Cisco NAC Web Agent, a component of the Cisco NAC Appliance Suite. The Cisco NAC Web Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please launch Cisco NAC Web Agent by clicking the button below.
Allow restricted network access in case user cannot use   NAC Agent or Cisco NAC Web Agent
          Restricted Access User Role:
role_engineer role_developer role_admin role_sales role_guest
          Restricted Access Button Text:
Restricted Network Access Message:
           Restricted Network Access: If you cannot use a Cisco NAC Appliance Agent, you can obtain restricted network access temporarily by clicking the button below.
Show Network Policy to NAC Agent and Cisco NAC Web Agent users (for Windows only)
          Network Policy Link:
Logoff NAC Agent users from network on their machine logoff or shutdown after
    secs (for Windows & In-Band setup, for OOB setup when OOB Logoff is enabled)
     (Setting the time to zero secs will logout user immediately. Valid range: 0 - 300 secs.)
Refresh Windows domain group policy after login
(for Windows only)
Automatically close login success screen after
    secs
     (Setting the time to zero secs will not display the login success screen. Valid range: 0 - 300 secs.)
Automatically close logout success screen after
    secs
(for Windows only)
     (Setting the time to zero secs will not display the logout success screen. Valid range: 0 - 300 secs.)

Adobe Edge links not working

Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
The hosts file is in /private/etc/hosts and can be accessed through the terminal:
sudo nano /private/etc/hosts
If you see a bunch of adobe servers in there, that is your problem.

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Purchased Lightroom 5 and Download link not working. Please advise

I have Purchased Lightroom 5 followed the download instructions and Download link not working.
I get a dialog box stating that I have Explorer 4 and I need a later version.
I am in fact running Explorer 10.
Please advise.
Bob Spree
England

Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Verizon Access Manager Download link not working

Hi,
Verizon Access Manager Download link not working, Following Links
http://www.vzam.net/download/download.aspx?productid=872
http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
plz help to download verizon five spot access manager.
thanks
karthirocks

Hi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

Sap crm ui logoff link not working prpperly

Similar Messages

Maybe you are looking for