SAP CRM5.0 Mobile client SP06 , JDK release incompatable

Hi,
We are under Implementation of SAP CRM 5.0 Mobile Client SP06 , dev, QA has been done. We are under process of setting up Production environment.As per the Installation document JDK release 1.4.2_02 , with the same
release we have completed for MRS,MDW and commstation.It works
absolutely fine.
Here we have a concern about JDK release for SAP CRM 5.0 Mobile client
SP06 installation on end users laptop.In end users laptop JDK already
installed highest release 1.6 and above which has been using for some
other applications.
Now when we try to run Mobile client SP06 on same JDK it is not
allowing to run it throws JDK release incompatable and also we could
not get next screen to continue to perform the installation.We knew
some of the functionality will not support for JDK highest release .But we still have concern.
Can you please suggest , why JDK highest release is not supporting to
Install Mobile client ? and also what is the highest release for JDK?
- kristene

i want to install SAP CRM5.0 Mobile client
so where i to get it.
-Naveed

Similar Messages

Unable to Install Mobile Client on my machine

Hi,
I am trying to install MSA on my machine but i am unable to do so . I have got following installed on my machine
JRE Version - j2re1.4.2_09
JSDK Version - j2sdk1.4.2_09
SQL Server 2005 with TCP/IP protocol enabled on it .
MSA Version -- CRM 5.0 SP07
Now if i try to install the Mobile Client on my machine, it installs all the related tools like Client Console, Conntrans, IPC ,Support Centre, but does not install MSA or MSV .
I was able to install the MSA earlier on the same machine, but when i am trying to uninstall and reinstall its not working .
I tried removing relevant registry entries , uninstalling SQL Server and reinstalling it . Couple of restart of the machine between this , but it does not seems to work .
Please someone let me know if you have faced this problem and a solution for the same
Regards
Hemant Gujrati

Hi Hemant,
It could be possible that not all the registry entries are removed. Please try the following:
1. Take a backup of your registry in case we need it later
2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall. You will see many keys with product guids as names.
3. Scroll through each one of them to see if any key has a value as MSA or MSV. If yes, then delete this key.
4. Now try to run the installation of SAP CRM Mobile Client. This time, the setup should run fine.
Hope this helps.
Niranjan

Office control in mobile client 7.1

Hi all,
i've included an office control in my mobile application to show a word document. However, when i open my application, i receive following error:
Fatal HTTP error 500 occured. Connection is closed now.
The exact error information is logged in
"C:\Program Files\SAP\SAP Netweaver Mobile
Client\HTTPError.txt"
This is the HTTPError.txt file content:
sessionUrl="//localhost:50080/dispatcher/demo.sap.com~attachorderapp/OrderAttachApp?sessionid=8117667533895423314&sap-wd-cltwndid=6DBFF94EF011DAA000000120E82345C3&sap-wd-appwndid=624B23E69166B08700000120E82345C3&sap-wd-locale=null" xmlns:SAP="SAP"...Localization dateFormat="MM/dd/yyyy" decimalSeparator="." groupingSeparator="," locale="en_BE"/...Client name="SAP-NW-Java" version="7.00" supportBits="6A...Server version="Unknown Version" os="Windows Vista" supportBits="537205"...Exception text="An error has occurred: Failed to process the request. [] " callStack="com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Invalid URL=
at com.sap.tc.mobile.mwd.runtime.sal.url.URLGenerator.checkURL(URLGenerator.java:340)
at com.sap.tc.webdynpro.clientserver.uielib.activecomp.impl.AbstractActiveComponent.getArchive(AbstractActiveComponent.java:896)
     at com.sap.tc.webdynpro.clientimpl.scxml.renderer.uielib.activecomp.AbstractActiveComponentRenderer.renderProperties(AbstractActiveComponentRenderer.java:91)
     at com.sap.tc.webdynpro.clientimpl.scxml.renderer.uielib.officecomp.OfficeControlRenderer.renderProperties(OfficeControlRenderer.java:106)
     at com.sap.tc.webdynpro.clientimpl.scxml.renderer.uielib.core.ViewElementRenderer.render(ViewElementRenderer.java:39)
Do i have to perform certain installations to let the office control work in my mobile client?
thanks
Edited by: Peter Vanneste on Apr 27, 2009 5:15 PM
Edited by: Peter Vanneste on Apr 27, 2009 5:19 PM
Edited by: Peter Vanneste on Apr 27, 2009 5:23 PM
Edited by: Peter Vanneste on Apr 27, 2009 5:25 PM

Hi,
If you are using the mobile applications for laptops, I am not sure if the JavaGui supports the office control as yet.
It would be better if you raise an OSS.
I had tried it a year back I got a UI rendrer problem.
Thanks and Regards,
Narayani

Error when synchronizing using HTTPS in NW Mobile Client

Hi all,
we are required to have secure communication during synchronization of data between the PDA handheld and the DOE.
Therefore, we are using the HTTPS synchronization you can select in the NW Mobile Client under Connection Settings (just set the check mark under "Secure Connection (HTTPS)"
However, when I synchronize, I receive the error message "SSL Certificate not available in trust store".
I could not find anything about how to overcome this error, how to install the certificate, or even where to find the certificate.
Could someone please shed some light on this.
Thanks,
Wolfgang

Hi,
Try using the default password 'changeit'. It should work.
You can import your certificate to trust store using following command
keytool -import -file "C:\Documents and Se
ttings\I041510\Desktop\ds.cer" -alias "al1" -keypass "changeit" -trustcacerts -k
eystore "C:\Program Files\SAP\SAP Netweaver Mobile Client\settings\truststore"
i.e)
keytool -import -file "your certificate file" -alias "your alias name" -keypass "changeit" -trustcacerts -k
eystore "C:\Program Files\SAP\SAP Netweaver Mobile Client\settings\truststore"
For more information about keytool command check the following link
http://java.sun.com/j2se/1.3/docs/tooldocs/win32/keytool.html
Regards,
Dhana

How to disable product update on Cisco AnyConnect mobility client

Hallo,
Do you anybody know how to disable/turn off "Checking for product update" during _every_ connecting Cisco Anyconnect Secure Mobility Client (VPN) to remote sites?
I found it may by possible on the ASA side, but I need to disable it on the client (computer). I can see that checking is NOT during connecting to my company site, but when connecting to ANY OTHER site everytime is new version checked. It takes some time ... and I need to switch between VPN often.
Thank you for your help!
Regards, Ondrej

You should be able to do this in the AnyConnect local policy. Just add (or edit, if you already have a local policy file) the following to the local policy file:

<anyconnectlocalpolicy acversion="2.4.140" xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemalocation="http://schemas.xmlsoap.org/encoding/ AnyConnectLocalPolicy.xsd">
<BypassDownloader>true</BypassDownloader>
</AnyConnectLocalPolicy>
The local policy file can be found here:
Windows Vista/7/8: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\AnyConnectLocalPolicy.xml
Linux/Mac: /opt/cisco/anyconnect/AnyConnectLocalPolicy.xml
See the Enabling FIPS and Additional Security in the Local Policy section of the Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 3.1 for more details.

Requisite JRE not found while installing CRM mobile client

Hi Experts,
We have been installing SAP CRM Mobile client component and when we start installation it stops showing the message "Requisite version of
JRE not found".
We are having java version j2sdk1.4.2_12 in the server and as per the installation guide "SUN Java 2 Standard Development Kit, Standard Edition Version 1.4.2_02 or higher in version" is required.
As instructed in the note 891477 we had installed java version 1.4.2_09
in a seperate drive and changed the value of the environment variable
JAVA_HOME accordingly.
But the problem still persists.
Also in the command prompt when we give the the command "java -version"
it shows 1.4.2_12.
Also note that our server is Microsoft(R) Windows(R) Server 2003, Enterprise Edition and 32 bit OS.
Kindly suggest.
Thanks and Regards,
Amit.
Kindly suggest how to proceed.

Hi,
I am installating Mobile Repository server 2007. All the requirments mentioned in Inst_guide are completed. .net frame work 2.0, Java j2sdk 1.4.2_09, cheked on CMD, SQL 2005 sp2 installed as per Inst-Guide latin1.
Working on Windows 2003 64bit
Now when I start installation pop up error window come
Error:
at InstAssist.InstAssistMain.startProcessing (String[]args)
at InstAssist.InstAssistMain.mai.(String[]args)
& installation couldnot move.
Thanks & Regards,
Darshan..

Big problem to install Mobile Client Component 5.0

Hi,
im trying to install the CRM Mobile Client Component 5.0, and im already stuck on the first installation screen, "Welcome to the installation of SAP CRM Mobile Client Component 5.0" Please press the "Next" button to continue installation.....THERE IS NO NEXT BUTTON, no buttons to be seen
anyone has encountered this problem? how to solve this
thx,
Maarten

Hi,
These issues can occur if you are not installing CRM Mobile on an clean system (without any SAP installation done on that machine before). Run windows installer cleanup utility to remove any installed SAP CRM Mobile software, reboot the system, check for s/w and h/w pre-requisites and start the installation.
Hopefully, it should work.
Best Regards,
Ramesh.

SAP mobile client and Creme

Can SAP Mobile Client work with any Java Runtime Environment except Creme ??

Hi,
NO, SAP Mobile Client only is tested and supported to work with NSICOM Creme only.
There is no other java VM supported by SAP for windows mobile.
Regards,
NIpun

MI 2.5 mobile client compatibility with MI server on SAP Netweaver 7.1

Hi folks,
Please let me know if Mobile client 2.5 on a laptop or Mobile is compatible with MI server on SAP Netweaver Mobile 7.1.
We are planning for mass migration of devices with data to be moved from SAP netweaver 2004 to SAP Netweaver Mobile 7.1
Keep in mind we will still have the old version of MI client that is MI 2.5 mobile client
Regards,
Kalyan

Dear Kalyan,
That is what I tried to explain briefly in your other thread.
No. you cannot use the 2.5 client to connect/ sync with 7.1 server. Even when the device info is migrated to the server, devices are handled in a different way in 7.1. For example in 2.5,7.0 you sync to get an id. In 7.1, you create a device (Data Orchestration Engine Admin) and enable it. When you syn the client for the first time, this gets assigned to the client or in other words, the client is authenticated to a new device.
Please note that there are a whole lot of other things that are different in 7.1.
Hope that gives a better picture. Check out the help.sap.com link for 7.1 (unfortunately u may have to read a lot in different parts of the help tree to get a better understanding, but as I said earlier, forum posts cannot be too elaborate and most of the posts if you see, tend to be abstract) Also why try to abstract something when the full details are available online @ help.sap.com or sdn help documents
Regards,
Veera

How DI Server Support Mobile Clients

Hi All,
I have following doubts regarding DI Server,
How DI Server Will Support Mobile Clients Applications?
How to install SBO Client in Mobiles Client and PDAs?
Will B1DE and B1TE Released for dot net 2005?
Please, Send Relevant Information for Above Questions. With proper documents.

Hi Mahesh,
Please publish such questions in the SAP Business One forum. This one is exclusively for B1i.
B1DE and B1TE are already released for .Net 2005
Best and thanks for your cooperation
Felipe

How to send to mobile client complaints

I'm trying to get complaints created on-line CRM5.0 to flow down to the mobile client and the field sales person that handles the BP. Do I need to create a subscription? Where in the Consumer pcakge goods application can I see these?
Thanks
Robert

I'm referring to the Mobile application Consumer package goods in CRM 5.0 SP 05. And I'm referring to complaints in the Sales area transactions.
Apparently SAP changed the functionality now where the Business object handling complaints is MSV_CMP_WRITE and not SALESDOCGEN_O_W in CRM 4.0.
The next thing is we are only sending to the laptop BPs by Territory, so the replication object for compalints don't allow to link to BP's. It seems we can only send one BP if you create the subscription for that BP. This is not good since we would have to create and support 23,000 for eac BP.
Hope this anserws the questions.
Robert

What functionality is available with sp 6 for CRM Mobile Client 7 eph1

Hi
Sp 6 has been released for CRM Mobile Client 7 eph1. I know sp 6 provides support for mobile client on windows 8 . Does it contain any other functionality?
Regards
John

Hi John,
All information regarding this release can be found in SAP Note 1799687
Regards,
Gervase

CRM Mobile Client Technology Documentation

Hello All,
Watch this space for information on Mobile Client Technology documentation.

Mobile Client Technology documentation
Mobile Client Technology (mySAP CRM), a part of SAP NetWeaver Mobile, is client technology designed for Microsoft Windows-based, occasionally server-connected CRM field applications. These applications offer a rich function set, such as SAP CRM Mobile Sales and SAP CRM Mobile Service.
With every support package release of Mobile Client Technology, we provide the following supporting documentation:
 Release Note
 Upgrade and Installation Guides
 Help Portal/ SAP Library content
 Limitations Note
 Collective Note
 API Documentation integrated with the application
Mobile Client Technology (mySAP CRM), a part of SAP NetWeaver Mobile, is a client technology designed for Microsoft Windows-based, occasionally server-connected CRM field applications. These applications offer a rich function set, such as SAP CRM Mobile Sales and SAP CRM Mobile Service.
With every support package release of Mobile Client Technology, we provide the following supporting documentation:
 Release Note
 Upgrade and Installation Guides
 Help Portal/ SAP Library content
 Limitations Note
 Collective Note
 API Documentation integrated with the application
First Point of Access
The following quick link under the Service Marketplace is the first point of access to the customers: http://service.sap.com/nw-mobile.
Path:
Click on SAP NetWeaver → SAP NetWeaver in Detail → People Integration → Multichannel Access → SAP NetWeaver Mobile → Mobile Client Technology (mySAP CRM) → Media Library.
Mobile Client Technology (mySAP CRM) > Medial Library contains:
1. Link to access the TICM guides (installation and upgrade guides)
2. Presentations on the Mobile Client Technology.
3. Other Technical Documentation and Guides (Performance Modelling Guide, User Management Usage Guide, Transport Component Guide etc...)
4. Link to access the Documentation catalog.
Documentation Catalog
The doc catalog lists and provides a description of all the types of documents that are provided for Mobile Client Technology and also points to the locations from where they can be downloaded.
The link to access the doc catalog PDF is provided in the nw-mobile area - http://service.sap.com/nw-mobile
Locating online help on the Help Portal:
1) Access http://help.sap.com
2) Click on Documentation → mySAP Business Suite → SAP Customer Relation Mgmt → English
3) Expand Data Exchange and Mobile Technologies → CRM Mobile Technology
4) Click on the online help that you need to access.
*Locating TICM Guides on Service Marketplace:
1) Access http://service.sap.com/instguides
2) Click on SAP Business Suite Applications → SAP CRM → SAP CRM 2005 → CRM Mobile (Laptop)

Resetting a mobile client (new device ID)

Hi,
We often experience that mobile clients have to be re-installed due to synchronization problems. Using the Reset feature on the client does not solve the problem so we have to start from scratch each time.
First the client is un-installed, a new client installed and then we start all over again with the distribution of applications & data. This process is VERY troublesome but SAP does not seem to have an alternative.
Are you familiar with a good solution for resetting the client including the device ID, so the MI Client can be re-used? This way we could avoid the re-installation of the client which is also an issue due to the laptop user authorization concept.
We are using SAP NetWeaver 2004s SP12 and MI Client 7.0 SP12 patch 5
Looking forward to your advice.
Kind regards
Christian

Hi Christian,
there are two possible ways: first you do a complete installation if MI on the client, add DB2e manually and enter the settings in mobileengine.config manually. This all happens without logon to MI and for sure without sync. If this is the case, you can create a copy of that folder and store it on device for later reference. All you have to do then is to copy this folder from SD card to \ and you have a running version. Register user, sync - and you have deviceID and start from scratch with sync and so on....
If users have different Versions of the App - please use the Profiles - all user that share the same profile will have the same version of the software by default - so this problem should be solved then as well.
The confusion about the Reset button is perhaps that you expect something else then it finally does. All it does is to remove the complete data from the persistence stack. But all general MI settings like Mobile ID, Device ID, SyncKey and so forth still are in the last value. If you have problems with data inside the APP, then this button is ok, but it will not reset the MI installation back to initial!
Perhaps these two blogs will help you:
Reinitialize MI client without reinstallation in seconds! Part 1&2
/people/sap.user72/blog/2005/11/17/reinitialize-mi-client-without-reinstallation-in-seconds
/people/sap.user72/blog/2005/12/01/reinitialize-mi-client-without-reinstallation-in-seconds-part-2
Hope this helps to solve your issue!
Regards,
Oliver

Difference between SAP Netweaver PI and SAP Netweaver Mobile and SAP DOE

HI,
I am learning Sybase Unwired Platform and SAP PI 7.1. I was going through SUP and SAP configuration documentation. I am really confused at one point. Does this SAP Netweaver PI 7.1 and SAP Netweaver Mobile 7.1 are same?. What is these DOE connector? is these DOE and SAP Netweaver Mobile 7.1are same? .
I have gone through various documents. but still i am very much confused. I am very much new to this platforms.
Can any one please help me in above topics.

Yes latest version is Netweaver mobile 7.1. and in one of the documentation of Netweaver 7.3 it is said that,
to download the non-ABAP software that is relevant for SAP NetWeaver Mobile 7.3.
http://service.sap.com/swdc --> Downloads --> Support Packages and Patches --> Support Packages and Patched u2014 Entry by Application Group --> SAP NetWeaver and complementary products --> SAP NETWEAVER MOBILE --> SAP NETWEAVER MOBILE 7.3 --> Entry by Component --> Mobile Client --> NW MOBILE CLIENT SETUP 7.3 .
Actually my problem is, I am unable to get DOE Setup.exe file. I am able to download only .SAR file. If i configure SUP with SAP Netweaver mobile 7.1. i need to install DOE seperatly.
In one of the forum, it is said that
if we want to use CRM mobile, we need the following landscape to deploy it (for example):
1.) ECC Backend (your CRM Backend, off course you need this)
2.) Netweaver Mobile 7.3 (This is the DOE part, including ESDMA)
3.) Sybase SUP
Well, you need to connect SUP and NWM7.1 together. To do this you need to install a DOE-Connector in Sybase. The NWM7.3 contains the counter part to DOE-C which is the ESDMA stuff. This is now included in NWM7.3. If you run still NWM7.1 you need to install that piece of connector as a separate add on.
This is where i got confused and was searching for NWM7.3.
Thanks
phanidps

SAP CRM5.0 Mobile client SP06 , JDK release incompatable

Similar Messages

Maybe you are looking for