SAP Crypto Software

Hello!
I want to know if I have to buy aditional components (SAP Crypto Software) to add transportation security using HTTPS protocol to web services, or Document authentication with X509 certificates.
I do not have SAP Crypto Software, can I secure my web services without it?
Thank you,
Sergio Fierens Bayo.

Hi check SAP note :597059
titled: License conditions SAP-Cryptographic Library
Symptom
The "SAP Cryptographic Library" (SAPCRYPTOLIB) is available in the SAP Service Marketplace (http://service.sap.com) for software downloading (export control, see note 397175):
Quick Link in the SAP Service Marketplace: http://service.sap.com/download
           Then follow the link to "SAP Cryptographic Software".
The following "License Disclaimer" is contained (LICENCE.TXT) in the CAR archives provided for download there:
<Begin of Disclaimer>
            License Disclaimer for the SAPCRYPTOLIB (SAP's Cryptographic Library)
            The SAP Cryptographic Library may only be used as an integral part of SAP products and not as part of other non-SAP products.
            The legal use of the SAP Cryptographic Library for Secure Network Communications (SNC) is limited to securing backend server components provided by SAP or entitled SAP partners. The use of the SAP Cryptographic Library for SNC protected communications on a personal computer that runs client components (for example, SAP GUI for Windows or SAP GUI for JAVA) is not permitted.
            The use of the SAP Cryptographic Library to secure the SAProuter communication when using the SAPNet - R/3 Frontend for remote support is permitted without restriction.
<End of Disclaimer>
The following explanations on the license conditions for using the "SAP Cryptographic Library" (SAPCRYPTOLIB) are intended to prevent any misunderstandings:
The SAPCRYPTOLIB can be used both as an SNC product and as an SSL Toolkit.
The restrictions listed in the "License Disclaimer" apply to the use of the SNC.
No further restrictions apply to the use of the SAPCRYPTOLIB as an SSL implementation in all SAP products. In other words, the SAPCRYPTOLIB may be used both in server and in frontend components, including for the SSL backup of the communication of SAP products for SAP or non-SAP products.
Other terms
Sapcryptolib, libsapcrypto, SAPCRYPTO, SAP Cryptographic Software,
Export control
Solution
n/a
Also i think you can download it for free provided you have a OSS userid.
Regards,
Siddhesh

Similar Messages

Download the SAP Cryptographic Software.

Hello,
I have tried to download the SAP Cryptographic Library package from http://service.sap.com/swdc. I don't find that package under :
http://service.sap.com/swdc -> Download -> SAP Cryptographic Software.
Where could I find it ?
What approval must I have ?
Regards,
Anne-Marie

you must logged in with an S-User account and confirm the terms and conditions form, before you are offered the download links of the SAP crypto software.
regards, Norbert

SAP crypto Library for PI 7.1

Hi Experts,
Could you please tell me, from where we can get SAP crypto Library and how to do the installation for PI 7.1?
If already installed then where to check it?
Please share your suggestions.
Thanks & Regards
Sara

Hi,
>As far as I know we can get the crypto library in the market place http://sevice.sap.com/swdc
>Here you got to download you will find sap crypto library software, Just download from there.
When you click on the link, you get this message :
>The software products offered here for downloading are subject to export control regulation in >Germany as the country of origin and import regulation of your own country. SAP may not yet >have a corresponding export license for your user / company. Please contact the contract >department of your local SAP company. Please note that to download the SAP Cryptographic >Software from the SAP Service Marketplace, you need a customer user-id.
Olivier

SAP Responder software

Hi all,
anybody can tell what is 'SAP Responder software' and for what use for this..
how to install in user laptop...please help as early as posible..
Regards
sheeba

Hi,
you should be able to find it on http://service.sap.com/swdc and there is an entry for SAP Crypto. right away in the menu on the left hand side
Ingo

From which place i get the sap netweaver software

hi
I want to purchase sap netweaver software. I have p4 computer at my home and what are the configuration of computer to install sap netweaver software.
Can you help me to get sap netweaver software?
Plz give me reliable or helpful information.
I m waiting for ur reply.
Edited by: Rajni Rani on Jul 2, 2008 9:33 AM

hi amit
I don't understand what do you want to say. I have opened that site but i don't know where is the information which is want to know.
Still my question is same.
Edited by: Rajni Rani on Jul 3, 2008 7:00 AM

Entry in SLD for SAP delivered software component contents

Hi
I have a predelivered software component version ( SWCV ) ESA ECC-SE 602 which I imported into IR ( by setting the *tpz file in the appropriate folder and the imported from IR ) This worked ok. Now I have a custom SWCV - that I created in SLD. Before importing this into IR , I want to create a install time dependency from this custom SWCV pointing to the standard. SWCV.
Question is : Where is the entry in SLD for the SAP standard SWCV - i.e ESA ECC-SE 602 - without this entry - in SLD - how can I point my custom SWCV to ESA ECC-SE 602 ? Or is there any other zip file apart from the *tpz file that is available in marketplace for ESA ECC-SE 602 that I need to import into SLD ? I am stuck at the point of defining the dependency with this question.

Hi
I see that in IR , the SAP std software component has the following name ECC-SE, version 602 . But I do not see a corresponding entry for this in the software catalog in the SLD.
*Question is - should an entry be created automatically in SLD under the software catalog for all SAP delivered contents whenever the tpz file is imported into the IR ? I don't see it created in our case. What is missing ?

What is the actual cost of SAP original Software?

hi experts
<b>What is the actual cost of SAP original Software to implement in one software company.</b>
thanks in advnace

Between $1 and $100,000,000.
Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
EDIT:
I just noticed you said "one software company". There are other options if you want to be a "partner". It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
Message was edited by: Norman Salter

SAP Crypto SNC PSE SSO from AIX daemon

Summary
We're trying to setup SNC with the SAP Crypto library on AIX, but we're getting inconsistent SSO access to the PSE depending on whether we run from the command line or from a daemon process that runs with the exact same user account. Put differently, SNC connectivity works from the command line and fails when run from the daemon (both from the same machine and same user).
Environment
We have only one [NIS] user account on the AIX client machine and the
sapgenpse seclogin -l
indicates that there is only one SSO mapping performed and it's the correct one for that user as the JCO demo client VeriClient can connect without errors using trusted system SNC (EXTIDTYPE and EXTIDDATA).
Initial assessment
The problem seems to be that it's the PSE SSO check that fails after monitoring the two processes using truss.
When run from the JCO client, it's easy to see it opening cred_v2, reading it and continuing on to the PSE file. The daemon however, after attaching truss to that process, we can see that it opens cred_v2, reads it and closes immediately and then proceeds to open dev_rfc.trc and writes the following error:
Error
Unable to connect to SAP BW server. Connect to SAP gateway failed
Connect_PM GWHOST=host.domain.com, GWSERV=sapgw01, ASHOST=host.domain.com, SYSNR=01
LOCATION    CPIC (TCP/IP) on local host
ERROR       SNCERR_GSSAPI
            An operation failed at the GSS-API level
            sec_avail="false"
TIME        Fri Feb 22 10:06:07 2008
RELEASE     640
COMPONENT   SNC (Secure Network Communication)
VERSION     5
RC          -4
MODULE      sncxx_mt.c
DETAIL      SncInit
COUNTER     2
We saw this on Windows as well and the solution there was to either change the service to run under the NT AUTHORITY\SYSTEM account and make a corresponding PSE association with SYSTEM, like so:
sapgenpse seclogin -p <mypse> -O SYSTEM
or, keep the service to run under the domain account and add the fully qualified domain user name to the PSE SSO, like so:
sapgenpse seclogin -p <mypse> -O "DOMAIN\Username"
Question
Back to AIX though, does anyone know why a daemon process that runs under the same user and has the same environment settings as when on the console would fail the PSE SSO check. Could it be related to the unix user not being a local host user?
Does the SAP crypto library assume a different name (some sort of FQUN) when running as a daemon and NIS'd user. I know it sounds very far-fetched, but I can't otherwise justify why it would simply error out after reading the cred_v2 file when all else appear equal.
Many thanks,
/Henrik

Heard back from some great guys at Secude and I thought I should share the finding that led to the resolution of this problem.
Setting the CPIC_TRACE=3 environment variable, generated a trace with enough detail that it was possible, even easy, to discern which user was being used to access the PSE.
In particular the following line was of interest:
GSS-API(min): No credentials found for this name (not logged on) (USER=user)
For the record, there is no such account with name user either locally or in our NIS, and naturally ps was making no references to such an account in the process list. Nonetheless, after
sapgenpse seclogin -p <mypse> -O user
I could access the PSE from the daemon process.
Without fully understanding the rationale for this behaviour, my thanks go out to the folks at Secude.
/Henrik

SAP Cryptographic Software - download ..XI

Hi,
Can you please suggest me from where to download <b>SAP Cryptographic Software</b> to install XI3.0SR1.
My Java : 1.4.2_06
OS: HP-UX
Thanks,
Chimsik

HI
GOOD
GO TO THIS LINK
http://www.easymarketplace.de/Quicklinks.php
http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/cb71b8046e6e469bf3dd283104e65b/content.htm
THANKS
MRUTYUN

Can't Access SAP XI software

I have downloaded the SAP NetWeaver Sneak Peek but there is no SAP XI software included and it appears that this software is "(in progress)", does anyone know how I can get access to the SAP XI software?
I'm especially interested in integration builder.

As of now there is no XI sneak preview available yet. Check the following thread about when XI will be available.
Re: XI on a small system
regards
Shravan

SAP EU software component for Web Dynpro SP9

Hi all,
I've followed the tutorial on how to create a Web Dynpro Callable object and couldn't go further because I couldn't find the libraries needed in the Local DC (caf/eu/gp/api/wd) api's.
I've found the Blog from Andre Truong on how to retrieve this API's in your Local Development Component projects (SP7).
/people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Unfortunally this is only working for SP7 (And maybe SP8) but not for SP9.
In the blog Andre mentioned that this problem might be resolved with SP9 because the API's come as default with the IDE.
This appears not to be the case for me.
Does anyone know how to resolve this problem?
PS I also read the following thread and the reply from Tomas Kuba but that seems to be a difficult and dirty way to do it?
Re: Guided procedures & WebDynpro (SAP-EU software component)
Thanks in advance!

Ok, seems to work just fine for SP 9 also.
Only the folders eu and gp don't excists. Just create them and extract the zip files.
Great blog thanks!
Message was edited by:
B. van Prooijen

How to install SAP SLC (Software Logistics Controller)

Hello,
How do I install SAP Software Logistics Controller?
Thanks for your help in advance.
Regards,
Haleem

Hello,
The link http://help.sap.com/saphelp_nw70/helpdata/en/3f/e892411663ad5fe10000000a1550b0/frameset.htm contains the steps for planning SAP SLM, security roles, lauching pad for SLM and the business scenarios associated to it.
It does not contain the steps to install SAP SLC and SAP SLM.
Can anyone please provide the checklist to
1-Install SAP SLM (Software Lifecycle Manager)
2- Install SAP SLC (Software Logistics Controller)
3- Integrating SAP SLM & SAP SLC with SAP SLD (System Landscape Directory).
Thanks,
Haleem

Copying SAP BCM software packages

Hi Gurus,
How can I proceed in order to Copy SAP BCM software packages???
I tried to search on SAP Service Marketplace, however I just found the documentation into this page: https://websmp208.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000697660
Thanks in advance!

Hi Gabriel,
Try the following to download it from SAP Support Portal download area:
->Downloads (service.sap.com/swdc)
->Installations and Upgrades
->Entry by Application Group" SAP Application Components
->SAP BCM SOFTWARE
->SAP BCM SOFTWARE 6.0
->Installation
->Media Zip is 51033874
Best Regards,
Shival

Where can get SAP Trial Software CD for training purpose

Hello all
I have needed SAP Trial Software CD. This is required for implementing and general view about SAP Solution. Where can I get these CD with minimum cost.
Thanks
Saif

Saif,
you should contact SAP directly on this issue.
They will tell you how to get a sample installation.
If you need a contct in your country and cannot find one, just ask here and we will try to get you one.
HTH Lutz Morrien

SAP cryptographic software

For SNC purpose i need SAP cryptographic software and i am able to locate it at :
http://service.sap.com/swdc ---> download ---> SAP cryptographic software
Here i have selected the required software and added it to my Download Basket. And now when i open this basket, i am able to see this software here, but when i select it and press Download button, i am not getting any further link or any option to save this software. Can anyone tell me why i am not able to download it? Also, is there any other link available where i can get this software.
Will Download Basket Manager be of any help in this case? I have not used Download Basket Manager earlier when i downloaded some other material from this site.
Edited by: David Garrison on Apr 22, 2008 7:52 AM

Hi David,
please use the appropriate forum to discuss this issue. I fear you will
not get a good answer for your question here. This does not seem to
be an ITS related issue.
best regards
Tobias

SAP Crypto Software

Similar Messages

Maybe you are looking for