SAP Crystal Reports 2013 Hangs

I have installed the trial version of CR 2013.  When I start the program, it just hangs.  I have to "end task" with the Task Manager.
This seems to be very odd.  Install a product for test trial and it hangs.
I am running Windows 8.1.
Any suggestions of how to resolve this?

Hi William,
if you search here on SCN there are some posts discussing that CR is hanging after installation. See e.g. here:
http://scn.sap.com/thread/3441650
I'd suggest to re-install it and as suggested in forum post above install it again with removing unnecessary data access components under Data Access.
cheers
m./

Similar Messages

  • Brochure SAP Crystal Report 2013

    Hi,
    Where I can download brochure in pdf format for SAP Crystal Report 2013?
    Thanks.

    Hi Khairul,
    If you are looking for documentation on Crystal Reports 2013 other than Raghavendra suggested, you may go in below link and specify the product to find all documents related to the product.
    https://help.sap.com/
    -Sastry

  • SAP Crystal Report 2013 on Windows 2012 and Lotus Notes Databases

    Hi everybody, does someone already try to use version 2013 of Crystal Report to report Lotus Notes databases content?
    We have been used older version for about 10 years without any difficulties as a native driver exist for Lotus Notes.
    But installing the version 2013, we have discovered that lotus Notes is not anymore present int the list of database to connect to...
    Can anyone provide sonme help?
    Many thank in advance
    Dominique Anderegg
    Insentia SA
    Lausanne - Switzerland
    [email protected]

    See the SAP Crystal Reports 2013 Product Availability Matrix (PAM), page 9 and download the doc linked to there. According to that doc, Lotus Notes is now only supported via ODBC only.
    Also, the search string 'lotus crystal 2013' (search box in top right corner) brings up the following KBA:
    1238167 - Cannot create new report off the Lotus Notes Domino native driver in Crystal Reports
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on Twitter

  • SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

    Hi,
    I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
    and on the ECC side we had to develop Crystal Authorization - how to develop this?
    Can someone screenshot of these steps and please suggest if something else can be done.

    Hi Pawan,
    Search for the error and you should see many threads for this issue.
    Anyway, this is what I found:
    logon failed. you do not have the necessary rights to design reports
    Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
    The wiki should have answers to all your questions regarding Transports, Authorization et al.
    -Abhilash

  • Sap Crystal Reports 2013 Performance Issues

    Hi,
    We are planing to do the report migration to sap crystal report 2013. now we have crystal report xi Developer licensed version and we download the 30 days evaluation(trial) version of sap crystal report 2013 only for testing. we have 1 report that created in crystal report xi version it runs within 5 mins for 2 lakhs records and same report we are testing on sap crystal report 2013 evaluation(trial) version with same connection and same report parameters it took 10 mins for 2 lakhs records.every report take more time in sap crystal report 2013 evaluation(trial) version as compared to crystal report xi Developer licensed version.
    Why this happened? is it issue of evaluation(trial) version of sap crystal report 2013?
    Kind Regards,
    Ganesh

    Hi Jamie,
    what database are you using?
    Oracle
    what specific db version?
    Oracle  11g
    what connection method?
    Oracle Server
    Above same thing we r using for crystal report xi licensed version and sap crystal report 2013 evaluation(trial) version but now issues is that report takes 45 min in sap crystal report 2013 evaluation(trial) version for 2 lac records,but same report takes only 5 min to run in crystal report xi licensed version. is this issue of licensed bcoz now we are run report on sap crystal report 2013 evaluation(trial) version.

  • SAP Crystal Report 2013 - Connection error with Universe

    Hi,
    I've trying to connect Crystal Report 2013 with Universe but I'm getting below error. Please can someone help how can I resolve this error.

    .Unx Universes are Not supported by the legacy CR Designers (including CR 2013).
    For that you have the new CR for Enterprise.
    Does a WebI report against the same Universe work fine?
    Do other universes (.unv only) work fine from CR 2013?
    -Abhilash

  • SAP Crystal Report 2013 for Classic ASP

    Hi
    I'm have question about CR2013
    1. For CR V.2013 support classic ASP ?
    2. If support, It coding for view report with web browser ? (Example source code)

    Sorry but no. Classic ASP is gone, never to come back.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on
    Twitter

  • SAP Crystal Reports 2013 with App-V5 SP2 Hotfix4

    Hello, ifIpaketiereSAPCrystal Reportsnot workingin theproduction environment.If the software iscapable of
    App-V?

    Hello,
    Perhaps if you were a bit more elaborate on the details in your specific environment, we could assist?
    Things that would be good to know;
    1. Can you share a recipe for how it was packaged?
    2. What is the production environment?
    3. What issues are you experiencing, and how are those manifesting themselves?
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • SAP tab in Crystal Reports 2013 issue

    We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
    "An error occurred while generating a new report templete.
    No error"
    Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue)  and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
    I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
    Thanks
    GORO.

    Hi Abhilash,
    Thanks for your response.
    Yes reports are working in CR 2013 designer.
    Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
    After exporting to pdf getting above errors...
    -Srinivas

  • Unable to create a crystal report 2013 on the top of SAP BW 7.00

    Hello Team,
    We are trying to connect SAP Crystal Reports 2013 to SAP BW 7.00 SP26. This crystal report is being developed on the top of a BEx query accessing through OLAP.
    1.  We are getting an error- 'Internal Error: The reports applicatiton server failed'.
    2. Also, when we try to upload the same report from CMC, we get an error."...................Failed to read data from the report. Reason: Unable to open the OLAP Cube......."
    Please advise.
    Thanks.

    BI Platform
    -Abhilash

  • SAP Crystal Reports 2011/2013 doesn't show Company Data Base

    I have CR versions 2011 and 2013 in several clients, and I can't connect to SAP B1 through the integration component. The behavior is that when I fill all the fields, I can't see the Company DataBases; if I type it manually and click "finish" I get the "conexion failed" error. With version 2011 it was working and then stoped working just like that. With 2013 has never worked. I've read in several forums that this error is recognized by SAP since early 2008 versions, but only talk about future "fixes". I've checked if any fix for 2013 is available but no lucky, it seems that fixes is a mess with CR.
    See screenshot. Any ideas how to fix this? is this really a bug?
    I have SAP 9 PL 9.
    UPDATE: My SAP Partner Support has told me this error is caused by the version of SQL I have (which is 2012) and that SAP will release a patch to correct this soon, is this correct?

    Hi,
    Please check SAP note:
    1966132 - SAP Business One 9.0 PL09 (SQL & HANA) supports SAP Crystal Reports 2013, version for the SAP Business One application
    Thanks & Regards,
    Nagarajan

  • Unable to save reports to enterprise from Crystal Reports 2013 and Crystal Reports for Enterprise

    Dear Expert,
    when we tried to save report to enterprise, error happened:
    "Failed to find a Report Application Server."
    We closed BO server firewall.
    We could check report from PC by browser.
    But when we save report from CR 2013, then error happened.
    Then we install CR enterprise and save report is ok from same PC.
    We launch latest patches too.
    Anyone see this before? Please kindly help~
    Environment:
    SAP Crystal Reports 2013
    SAP Business Intelligence 4.0
    Regards,
    April.

    April, since you have CR4E, you also have BI and thus free phone support included. My suggestion would be to create a phone incident and work with an SAP engineer on the issue. Only saying because it looks like you're somewhat anxious to get this going(?).
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Crystal Reports 2013 Service Pack2

    where can I download the SP 2? I have buy a single licence

    To get the latest Service Pack for SAP Crystal Reports 2013 see the blog An Update for the Saga of Service Packs for CR 2011 / 2013
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Connecting SAP Crystal Report with EHP6 FOR SAP ERP 6.0

    Hello Everyone!
    I have downloaded SAP Crystal Report demo 30 days and we have an IDES for "EHP6 FOR SAP ERP 6.0", how can I make some reports and train myself with crystal report?
    I don't understand how to make the connection to our SAP DB, can you help me?
    Thank  you!
    Denis

    Ok solved.
    - I assure where is the  saplogon.ini (in my case: %appdata%\SAP\Common\saplogon.ini)
    - I open the saplogon.ini with notepad and set the UTF format and than save it replacing the original one if it was not in UTF format
    - I go to : control panel>system>advanced>environment variables>system variables and I create a new one with name "SAPLOGON_INI_FILE" and path "C:\Users\....\AppData\Roaming\SAP\Common\saplogon.ini";
    - Open SAP Crystal Reports 2013 (in my case) > VIEW > Preferred Viewing Locale > (here I set the language of the SAP System I am going to log on with crystal report, in my case was in english so I set English)
    - (within SAP Crystal Reports 2013) > FILE > Log On or Off Server... > Create New Connection > SAP Table, Cluster, or Function > (now it shows me all the different SAP Systems that are also in the SAP GUI Logon, choose one, set the client-username-password and then finish)
    Thank you,
    Closed.

  • How to configure crystal report 2013 with oracle 11g

    hey all,
         i download trial version SAP Crystal Report 2013 and i have Database with 11g and i want to connect with my database and try to develop reports
    but my issue is that i'm not able to connect with database. Can anyone please help to connect with database.
    i am new be with oracle database so it will help me if any one go thru step by step or any link,

    Hi Sandip,
    All you need is a 32-bit Oracle driver to be installed on the machine you're developing the reports on.
    If you already have both the 64-bit and the 32-bit drivers, make sure the Path variable under 'system variables' points to the 32-bit home.
    You can then either create an ODBC DSN or use the 'Oracle Server' native driver that shows under 'Database Expert' to create the report.
    -Abhilash

Maybe you are looking for