Sap customizing request pop-up not getting generated
Hello Experts,
I am facing a problem while generating customizing transport request, the transport request creation pop-up is not coming,
Checked in scc4 - customizing chenges allowed + automatic recording is set and client role is customizing , but still i am unable to see any pop-up for the transport request creation . Please help!!!!
Regards
Shubhangi Pandey
Hi,
You might have more success raising this question in the relevant functional forum, transaction OOEG does not seem to use generated table maintenance but here on the ABAP development forum you're pretty likely to keep getting the same answer.
Regards,
Nick
Similar Messages
-
SAP F&R - Order Proposals not getting generated
Hi Experts,
I am currently on SCM 5.0 system. For a location-product on uploading the consumption data, the forecast gets generated but no Order Proposals are getting generated at all. When I look at the Source of Supply, the delivery dates for the location-product are appropriately displayed.
The scenario is basically Vendor -> DC -> Store i.e. V111 -> R601 -> R611 for the product FR11. The time series of supplying location is displayed for FR11-R611 in CADE while FR11-R601 is not displayed. I suppose, this may be, why the OPs are not getting generated. How do we generate time series for FR11-R601 i.e. for V111 (vendor) ?
Also, When i try to run a location status check on R611, /FRE/FU_CL_FRP_SAFOUT_CRIT comes out with a fatal error with the remaining others in an INITIAL state. How do we resolve this issue.
Thanks & Regards
PrashantHi,
I was able to solve both the issues with a change in the Forecasting Frequency profiles where the reference day for start week was on "FRP Location Activation Date". I changed it to Calendar date and checked the forecast and it worked with the Order proposals also generating. Also, the location status check out for the mentioned location was in "OK" state.
Also, a second methodology applied to overcome the problem was to go to SAP Menu -> F&R Processor -> Administration, from there go to the location tab where the locations had a deactivation date of 31.12.2009. I extended the date and then there was no need to change the forecasting frequency profiles.
Regards
Prashant
Edited by: Prashant Kedare on Mar 3, 2010 9:38 AM -
Custom log not getting generated in weblogic 10.3.5
We have weblogic 10.3.5 as application server and deployed DAM(Digital Assets Management ) application on it. Also we have deployed 2-3 more application which is sharing connection properties file (dfc and log4j) outside from application war in shared location.
Now, we have configured the log path but logs are not get generated where as it comes in out log of weblogic.
Is there any configuration changes which can create the log files as mentioned in our log4j.properties?? Seeking help urgently.How are you writing to the log file in your application?
When, for example, use System.out.println the entry will show up in the .out file.
You need to get the right loghandler to write the logging you configure. -
TDS reversal entry is not getting generated at time of F-54
Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumarHai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I -
CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC
Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
ParthaHi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga -
STPPOD.DELVRY03 idoc not getting generated
Dear Experts,
I have done the following settings for STPPOD.DELVRY03 but still idoc is not getting generated when i am posting goods reciept using VL32N
1) For Confirmation control key selected A-Always POD Relevant
2) For Item category ELN POD Relevant X and POD Automatic
SAP->Customizing Implementation Guide -> LogisticsExecution ->Shipping
->Deliveries ->Proof of Delivery ->Set POD-Relevance Depending on
Delivery Item Category
3) In Vendor Master the field "POD-Relevant" is assigned the value "A".
4) In NACE settings
Application:E1
condition records & output type:OPOD
Delivery type:EL
Function:LS
4) In pratner profile
Partner Type-->LS
Partner Role --> blank)
Message Type-->STPPOD
Basic Type ->DELVRY03
and under message control
Application->E1
Message Type
Process code-->OPOD
Please suggest me if I am missing out on someting.
Thanks
Gaurav GuptaHi Gaurav,
Typically for STPPOD Idocs, the NACE and WE20 Settings are maintained at Vendor Level. Try changing your settings and see if it works.
Refer this link for further details : Re: STPPOD triggered sending wrong material from SAP to SNC
Thanks,
Bharath -
Salary statement not getting generated after Upgrade
Hi all,
We have recently Upgraded to NW 7.4 SP6 from 7.01 SP9 . we are using two standard ESS applications for HR i.e Leave Request and Salary statement.
Leave Request application is working fine but salary statement is not getting generated with an error message.
The ESS /MSS Components installed are as follows.
BP_ERP5***
1000.1.0.18.0.20100828050255
BP_ERP5COM
1000.1.0.19.0.20110829150538
BP_ERP5ESS
1000.1.41.11.0.20120402111759
BP_ERP5MSS
1000.1.51.7.0.20130923050751
SAPPCUI_GP
1000.633.0.1.0.20120427113021
SAP_ESS
1000.633.0.1.1.20120802180711
SAP_MSS
1000.630.0.1.0.20120427113023
while generating the salary statement we get the following errorSearch OSS note for those cubes. This should be a known SAP issue. We too had similar issue (though i dont remember now which statistic cube it was) and got resolved after next upgrade.
Abhijit -
Early Watch Reports are not getting generated.
Hi Experts,
I'm new to Solution Manager.
We were getting EWA report regularly till last month in solution manager.
But for the past one month the reports are not getting generated and I'm getting the following error message.
Kindly help
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000000704
Thanks,
ShanahasHi,
The maintanance package is getting executed everyday. However, it is throwing some error.
I have checked the RFC connection and they are working fine.
Here with I'm attaching part of the log i got for the maintance package error.
Pls help
Maintenance Package completed
> Maximum number of retries reached ( 0003 )
Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
Retrieval of license data failed from destination SM_SOMCLNT100_BACK
> ( AGS_MK_GET_MAINT_KEYS )
> Function module for retrieval of license data not available on Solution Manager
Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Error refreshing service definitions from destination SM_SOMCLNT100_BACK
> Password logon no longer possible - too many failed attempts
> error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
> Re-entry after error
Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
> Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
> Password logon no longer possible - too many failed attempts
> error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
> Sessions are up to date
Refresh sessions from destination SDCC_OSS started [Maintenance Package]
> Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
Delete old session and log data :
Maintenance Package started
Thanks,
Shanahas -
Transportation lane KEY not getting generated in the table
Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PMYes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar -
Proposals are not getting generated for BOM items in MD50
Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmatetry to use strategy 20
-
Display name not getting generated When creating user thorugh GTC
We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm -
Wlproxy.log not getting generated
Hi
I am trying to proxy the weblogic requests through IIS 7.5, it is working. but wlproxy logs are not getting generated. Please fnd below my iisproxy.init file contents.
Could any one tell me if I am missing any thing.
Steps followed.
1. created website in IIS
2. added isapi filter by giving the iisforward.dll path, name given is wlforward
3. added handler mappings by giving *.wlforward as the path and giving iisproxy.dll path
4. added the file iisproxy.ini file
iisproxy.ini contents
WebLogicHost=xx.xx.xx.xx
WebLogicPort=7002
WLForwardPath=/
DefaultFileName=/TEST/index.jsp
WLproxySSL=ON
SecureProxy=OFF
RequireSSLHostMatch=false
Debug=ALL
DebugConfigInfo=ON
WLTempDir=D:/Temp
Regards
PPKIt is working. It is something to do with admin rights on that file clreation. I got full admin access. now it works.
-
Dear All,
I know this is a repeat query but im unable to find information from the blogpost http://scn.sap.com/docs/DOC-41109.
I have earlier configured the WWI setup in a linux server. Now I am testing it on a windows server. I have made all the configurations in word and for generation server. The issue is, the report is not getting generated in report management screen and is in status Generation possible always.
When i check the wwi monitor, the doc type SBR is getting released but not getting completed. Please see the screenshot. CGSADM is working fine, RFC is working fine. I tried creating documents in CV01N and they are getting created. The DCOM settings are also good and activated the permissions there too. The DMS settings are set as per the SAP notes. However The job i scheduled is in status Finished for document generation. But when I try to generate the report, the report is created using a variant and the status of the report is in generation possible always. I checked the variant of the report and the validity is in REG_WORLD. I understand that there is some issue in the scheduled job.
I have scheduled only one job for Document Generation as follows.
a)Enter the job name - DOC GENERATION and choose a job class - A.
d) Choose Start condition and in the dialog box, choose After event.
e) Enter SAP_SYSTEM_START in the event field.
f) Activate Periodic job - HOURLY
g) Choose Check and save your entries.
h) Choose Step and choose ABAP program in the dialog box that appears.
i) Enter RC1WWIDS as the ABAP program name.
j) Choose Check and save your entries.
k) Before you leave the Define Background Job screen, you must save your entries once more.
Result: The job is started whenever the SAP system is started.
aFTER REPEATED ATTEMPTS, THE RESULT IS THE SAME AND NO CHANGE IN STATUS OF THE REPORT.
Kindly suggest what step am i missing . I have been through all the blogs in SCN. My old blogs are however missing and hence I am not able to access them.
I am using SAP GUI 7.30, ECC6 and EHP 5.
Regards
DhineshDear Dhinesh
Please help me to understand your system landscape.
a.) Did you have had a SAP EHS up and running together with a "linux server" based WWI version
and
b.) now you are switching the same SAP system to a "windows server" based version?
I am not sure about your screenshots. But you seem to have more than one gen server attached to the same system; did you updated as well WWI?
So no adaption of general SAP set up (like DMS etc.)?
Therefore any job scheduled (before afterwards) is done using a SAP account having the necessary access rights?
Can you please check this:
1.) create several sessions; one with WWi monitor and one with CG02; try to generate a different report for the same spec id (e.g. not MSDSUS in EN, but MSDS/FR) and check progress in WWI monitor as well as CG50
2.) select in CG50 the report in status "generation possible"; mark it and try to "go" on ; check access rights afterwards (su53)
I hate this status "generation possible". I believe you need to use "debug replace" to remove that entry; I can not remember any more but that was the only option to get "rid" of this entry
Please read WWI cookbook, There is a set up possible in such a way that any action on WWI server is "logged"; may be try to analyze the log file to get idea why there is no progress regarding the generation
PS: the problem you have detected is not related to the "validity area". It is a matter of communication issue between SAP and WWI server and the WWI process can not be finalized.
But you are not alone with your problem (e.g. check:
http://www.benxbrain.com/en/sap/program/RC1WWIDS-Generation-possible-status-not-changing-thread-1-1547841.htm)
http://scn.sap.com/thread/3311944
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-ESEWSRSTAT
https://scn.sap.com/thread/1575223
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/ehs-wwi-processing-272462
Check as well your own thread: http://scn.sap.com/thread/3304285
C.B.
PS: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
as well as:
http://www.stechno.net/sap-notes.html?view=sapnote&id=580586
PPS I: logging feature of WWI is described here: Note 778684
PPS II: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
PPS II: may be check as well: http://scn.sap.com/thread/3344033
and http://scn.sap.com/thread/1381004 -
PR not getting generated in MD50
hello,
anybody please help me.
My scenario is make to order for FG & SFG. make to stock for RM & Packing material.
MRP TYPE : PD
For FG & SFG: Individual Requirement
For RM & Packing material: collective requirement.
RM & Packing materil Stratergy group : 10
Avilability Check : 02 (individual check)
My problem is when i doing MRP run by using MD50, Purchase request are not getting generated for RM & Packing material when there is not stock, no po & No PR. in MD04 it showing dependent requirement. again when i am doing MRP run with MD02 pr getting generated. please suggest how to resolve this issue.
my client is asking to generate PR at MD 50 only.
Thanks & Regards
bhaktaMD50 is for sale order planning, system will plan with respect to sale order only - you are considered the RM and packaging as a MTS scenario, then how the system will plan for RM and Packaging in MD50
are you procuring raw material with respect to sale order means
then for RM and packaging, remove the strategy group and maintain individual indicator, then run MRP in MD50, system will plan for RM and pacakaging material also -
Planned order not getting generated at plant level
Hi experts,
When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing to generate planned order in plant level.....
Regards,
Joseph.
Edited by: joseph5885 on Aug 12, 2010 9:23 AMDear Joseph,
No it is not recommended. only in emergance cases this will be done
Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
So the above said t-codes will take care of the same
Added
Refer this link
[Planning file entry;
Regards
Madhu
Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM
Maybe you are looking for
-
Error in Bapi_GoodsMvt_Create using Purchase order
Hi Friends, I am using Bapi_goodsmvt_create for Goods Receipts against Purchase order. The below code i have given for Goods receipts It shows the error like ID : 8J Err No.:182 Message : Entry 4500000344 00040 0000 not valid; correct entry Please he
-
ABAP Routine for Deleting and creating index for ODS in Process chains
Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.
-
We are getting the following error when we use the "Issue for Production" form "StoreDocData: 0 : The Loged on User does not have permission to use the object" Is there an authorization I have missed? Thanks, Rob
-
Common Header in each page in WP8
Hi, I am creating a Windows Phone application.I have a common header that I have to display in each page.Is there a way to create a common UI that could be included in every xaml page.If yes, then how can I do it?
-
Help importing Workshop 8.1 project into Workshop 10
Hi, I'm trying to import a workshop 8.1.4 project into workshop 10 using the "Import > Other > Workshop 8.1 Application " wizard. I select "myapp.work". I then click on "Target Runtime > New" button to make sure my project is pointing to the 8.1 runt