SAP Dashboards - Area graph- Data values display - x-axis 1st value is not showing

Hi
Not able to show the first data value in area graph. 2500 is not showing in the chart...remaining values able to display...
Kindly let us know, is there any specific setting to be done....

Hi sunil,
Your question has the answer. When we display same data in line chart or bar chart, you have the space to start displaying the value. But in this case the area chart will accumulate the whole chart to show the lagging & leading data from the start to end, so you cannot view the initial value to display. If this chart doesn't suits your requirement you can go with other charts.
The workaround will be like, if the month's are static like will you be displaying all twelve months in this chart then i would request you to take twelve text components in top of the chart or in any comfortable space where you can bind those value.
Hope this information is helpful.

Similar Messages

The Grid Thumbnail view of my files does not show a continuous sequence of my photos. For instance if I am viewing them at the reduced size of a 3x7 grid, there are 3 columns of photos to the right that do not show. That is the grid is 3x10 but only 3x7

Below are 2 screen shots of the Grid Thumbnails. If you compare the 2nd to the first you will notice that there are several pictures showing in the second view that do not show in the first. That is they are cut off. How can I adjust the viewing so the preview shows all the photos with none being cut off?
Thanks, McGue

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Date field submited via my custom form does not show in mysql database

I created a form with the custom form wizard with a birthdate field having the date picker feature. i set the birthdate field to sumit date as date datatype. My birthdate column in mysql database is datatype date. but when i submit the form the date does not show in mysql database. what should i do pls. is the problem with my form or with my database birtdate column.
Thanks

zeeztaz wrote:
iis the problem with my form or with my database birtdate column.
Thanks
please post the complete code of the page which contains that form, otherwise it will be impossible to detect the possible reason for this error.
Cheers,
Günter

Crystal 11 Stacked Area Chart Data Start Point X-Axis

I am trying to create a Stacked area chart and by default there is space between the y-axis and the first data point on the x-axis. Is there any way to eliminate this space so that the first data point appears directly on the y-axis?

I found the answer to my question. Uncheck the box "Value Axis Crosses Between Groups" in the "Group (X) Axis Settings" dialog box.
Edited by: Chuck Gebhardt on Oct 14, 2011 12:28 AM

Websites are not displaying all graphics. Amazon does not show any buttons/links to place orders. My Yahoo home page is not complete. What do I do besides going back to IE?

Colors, icons, links, buttons for ordering on Amazon do not appear through Firefox, but do with IE. My Yahoo homepage is also missing a lot of graphics, pictures, etc. Text is all in blue rather than black

Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks!

Value help on a published CR do not show the value help as an hierarchy.

Hello experts,
we published a CR based on a Bex Query to the BW role and to BOE. The parameters on CR are based on Bex Hierchy variables. If we logon with an SAP User (with SAP_ALL) on Info View/ BI Launch Pad to execute the CR the value help shows the hierarchy correctly.
+ world
+ North Amerika
+ Western Europe
+ Asia
If we logon on to Info View / BI launch Pad with a normal SAP Enduser (without SAP_ALL) but with all needed End User Roles the value help shows a flat List....
World
North Amerika
Western Europe
Asia
We try to trace this authorization issue but we do not got any clearly results.
Maybe someone knows the needed authorization Object on BW....?
Regards Michael

Hi,
the authorizations are documented in the installation guide for the SAP Integration Kit and the authorization trace should show it as well
ingo

Mini display port hdmi cable and adapter not showing display on LG TV

Connected my macbook air up to my LG TV 32 inch, via mini displayport - adapter to HDMI and then HDMI cable to HDMI port on the TV.
the TV is detected on detect displays on the macbook - but the TV says no connection.
Does anyone have any idea why this isn't working?
I've tried both HDMI 1 and 2 ports on the TV and neither can detect a connection, although when first connecting it it did say "connecting" for about 5 seconds before cutting out.

Seems like many people are experiencing problems with connecting to a tv via mdp-hdmi adapter. I have the same problem connecting my newly bought macbook air to my 4 year old samsung 32 inch. Both screens goes blue and blinks. My mac recognise my tv though, it says samsung when I go to the screenmenu to change resolution.
I have tried two different adapters, the moshi adapter which Apple recommends and another one. Im experiencing the same problem with both.
I´ve kinda concluded that it has to be a software problem since my mac has started to act strangely after I tried making it work for 20 minutes.
Apple please fix -.-

Items to display in list view web part not showing the items setup

Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other.

Value Type 32 for RA revenue is not showing up in COSP

Hi gurus,
I have some posting for RA revenue (Value Type - 32). I checked the values in RPSCO, but when i try to get the same values in COSP, i am not able to view any posting or values for RA revenue value type 32.
Is there any config for this, i am not sure what was the issue behind this.. can any one give me a solution...
- Pithan

If it is unsolved, then why are marking the thread as "answered". There are other options available to close the thread, use appropriate option.

Some items are grey on my iPad when in iTunes, but do not show up on my iPad

There are 3 TV shows that I loaded previously onto my iPad. I've deleted all three, but everytime I connect my iPad to my computer, the 3 shows are still present according to iTunes, though the titles are grey, not black. I can delete them, in the usual way, while in iTunes, but they reappear when I reconnect my iPad. All three shows were "free" featurettes, or full length shows from iTunes. They never show up on the actual iPad, just in iTunes if I am looking at the contents of my iPad. I have tried restarting my computer, and iPad--no luck. I also tried to re-download the show and reinstall it onto my iPad so I could delete again. Didn't work either. This doesn't appear to cause a functional problem, but is annoying. Suggestions?

Me too, i have the same problem with three music titles. Any solution ???

My songs are in my iTunes library but the song titles do not show up on the songs list.

I have an older generation iPod nano, do I need to go back to an older version of iTunes so I can see the song titles on the song list? If so, does anyone have a link to the oder verson?

Does anyone know of an audio CD burner that will consistently label the original information?
Audio CDs do NOT have info except for CD-TEXT, no matter which program you use.
The Redbook audio CD standard does not allow for anything except CD-TEXT.
iTunes will write CD-TEXT but it will not read CD-TEXT.
You can burn data CDs and all the info will be retained and can be played in iTunes.

TS1967 My songs are in my iTunes lirbary but the song titles do not show up on the songs list.

Any ideas on how to fix this? I've already uninstalled and re-installed iTunes.

Does anyone know of an audio CD burner that will consistently label the original information?
Audio CDs do NOT have info except for CD-TEXT, no matter which program you use.
The Redbook audio CD standard does not allow for anything except CD-TEXT.
iTunes will write CD-TEXT but it will not read CD-TEXT.
You can burn data CDs and all the info will be retained and can be played in iTunes.

Date of a tdm file set in LabVIEW not showing up in diadem

Hi.
I 've got a problem with the date string in Labview. If I set a property of a tdm file by using the diadem connectivity vi the datestring only consist of three "-" in the diadem file portal. I'm using the time stamp vi and connecting its exit with the express vi "set property". What did I wrong?
(Sorry for my English)

Hi Brad.
Thanks for the code. It worked so far, but this isn't what I had in mind. The Express VI "set property" within the Diadem Connectivity VIs has a connection named "time stamp", which can be used to set the date for a tdm file by connecting the Labview VI "time stamp" with it. If I load or save a file in LabVIEW, everything works fine, it's only Diadem, which doesn't recognize the date or time. I need the date, when the tdm file was created, for the first page of a test record. The variable "DataSetDate" returns only "---".
Thanks a lot,
AndreasMessage Edited by Andreas on 04-01-2005 02:05 AM
Message Edited by Andreas on 04-01-2005 02:12 AM

Why are my apps that i downloaded from the app store not showing up on my phone?

i have download 3 apps from the app store on my iPhone4s. when they are finished downloading, it gives you the option to open it from the app store but it refuses to do so. when you check on the page of your phone apps, the apps don't show up.

Have you tried restarting your phone? You could also try a reset: Settings > General > Reset > Reset Home Screen Layout.

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

SAP Dashboards - Area graph- Data values display - x-axis 1st value is not showing

Similar Messages

Maybe you are looking for