SAP Database Server SLD Error

Hi Experts,
i am new to SAP Hana and i have been tasked to install ans SAP Hana Database and client for the first time.
Can anyone show me the steps to achieve this. I mean which should be installed first and followed by what.
This is what i did first and i need your corrections;
1.     Installed HDB_SERVER_LINUX_X86_64
2.     installed HDB_LCM_LINUX_X86_64
3.     installed HANA_IM_LINUX__X86_64
4.     installed HDB_AFL_LINUX_X86_64
5.     installed HDB_CLIENT_LINUX_X86_64
and not forgetting Packages.Linux
but during the installation of Packages.linux i get the error attached," Failed to connect to specified SAP Hana server".
Also when i was initially installing the packages.Linux i get the error or message that /usr/sap/client32 required so i edited the folder i had /usr/sap/client to the 32.
Please help me solve the error attached and also help me with the steps i have listed above to install Hana appropriately.
Regards
Justice

Hi San Xu,
below is the combination of the platform i have;
DATA_UNITS:
HANA_IM_LINUX__X86_64
HANA_LCAPPS_10_LINUX_X86_64
HCO_HANARDL
HCO_HANA_EPM_SERVICE
HCO_HANA_INATOOLKIT_HTML
HCO_HANA_SHINE
HDB_AFL_LINUX_X86_64
HDB_CLIENT_AIX_PPC64
HDB_CLIENT_HPUX_IA64
HDB_CLIENT_LINUXINTEL
HDB_CLIENT_LINUX_S390X_64
HDB_CLIENT_LINUX_X86_64
HDB_CLIENT_LINUX_X86_64_SLES9
HDB_CLIENT_MS_EXCEL
HDB_CLIENT_NTINTEL
HDB_CLIENT_OS400_PPC64
HDB_CLIENT_SOLARIS_SPARC
HDB_CLIENT_SOLARIS_X86_64
HDB_CLIENT_WINDOWS_X86_64
HDB_LCM_LINUX_X86_64
HDB_SERVER_LINUX_X86_64
HDB_STUDIO_LINUX_X86_64
HDB_STUDIO_WINDOWS_X86
HDB_STUDIO_WINDOWS_X86_64
K_720_U_LINUX_X86_64
LABELIDX.ASC
SAPHANALM_LINUX_X86_64
SAP_HANA_HWCCT
SAP_HANA_INFOCOMP_10
SAP_HANA_RSA
SAP_HANA_SDA_10
SAP_HOST_AGENT_LINUX_X64
SWPM10_IM_LINUX_X86_64

Similar Messages

SAP Database Server

Hi,
I would like to install ECC 6.0 with Oracle 10.0.2.4, but the question is, if is possible to put all databases in one server.
DEV + QAS + PRD (DB) in one server and the SAP would be on other server.
This instalation will be on Linux, and on the SAP Instalation Guides does not any reference to this kind of instalation.
Can you help me?
Kind regards in advance,
Nuno Silva

Hi,
It's technically possible but it is, in my opinion, a very bad idea.
The production system is much more critical than DEV and QAS.
By definition you will make some tests on the DEV system. You will need much more often to reboot the server. You may crash the production system because of problems on DEV or QAS. And so on...
Regards,
Olivier

SAP Crystal Server installation error

while installing Crystal Server 2013 sp4 on windows 2012, I am receiving the following error at the end of the installation and after waiting around 20 minutes: "installation encountered errors"
not other clue is mentioned or error number.
after checking the log, It seems the CMS is unable to start.
I tried the following"
1- reinstall again
2- redownloading the installation package
3- disabling the windows firewall
4- installing SQL server and using it instead of the bundled SQL
5- changing the default port of the CMS during the installation
please find attached the last part of the log file
kindly help
thanks in advance

thanks a lot guys.
I reinstalled the older version (sp2) instead and it is working fine.
apparently there is an issue in the SP4
if anyone encounters the same I would be more than glad to know the resolution for it.
thanks

ORACLE ERROR WHILE INSTALLING SAP DATABASE INSTANT

HI
this is rahul
Iam facing some problem while installing SAP DATABASE INSTANCE with error code ORA-01092 instance terminated with forced at the stage of database building
please help me
urgently
urgently

Hi Rahul,
It will be useful if you can send the error message which can be found in the oracle alert log.That information will be helpful to findout the solution.
Oracle alert file can be found in oracle/<SID>/saptrace/background
with name alert<SID>.log

SAP Content server connectivity

Hi..
SAP Content Server 6.40 on Solaris 10, Apache 1.3. xx installed successfully. i unable to connect from ECC to SAP Content server gives error in error_logs of app ache
Mon Sep 6 14:46:55 2010 error http://client 172.16.20.219 File does not exist: /usr/sap/XXX/apache/htdocs//ContentServer/ContentServer.dll
It really great full, If you can help.
Regards,
Panu

Das..
Yes my apache server installed and able to open and start and stop.
installed path: /USR/SAP/XXX/APACHE
Port :1090
while installtion apache use make and make install command successfully.
Installed SAP Content Server 6.30 on Solaris and can't get pass the CSADMIN First screen that ask the server/port and script. according to installation document it ask for ContentServer/Contentserver.dll but my installation on the Content Server 6.40 didn't exist that script.
Did i installed correctly.
it really helpful if you can help on this.

SAP Content Server logs

Hi..
SAP Content Server 6.40 on Solaris 10, Apache 1.3. xx installed successfully. i unable to connect from ECC to SAP Content server gives error in error_logs of app ache
[Mon Sep 6 14:46:55 2010] [error] [client 172.16.20.219] File does not exist: /usr/sap/XXX/apache/htdocs//ContentServer/ContentServer.dll
It really great full, If you can help.
Regards,
Panu
Edited by: kumar panu on Sep 6, 2010 2:02 PM

Hi Ravindra,
We have created repository in OAC0 but when we connect going to connect through the CSADMIN unable to connect to SAP Content Server.
Can you please confirm the script is correct for Solaris Sytem?
HTTP SCRIPT: /ContentServer/ContentServer.dll
Regards,
Panu
Edited by: kumar panu on Sep 7, 2010 7:36 AM

BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon

Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.

Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds.

Error while starting SAP Application Server

Hello everyone,
This morning, i tried to start the SAP application Server, and i have this message error, some sentances are in frensh , i translate it in english with this sign --> before.
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
Le nom de service n'est pas valide.
-->The service name is invalid.
Vous obtiendrez une aide supplémentaire en entrant NET HELPMSG 2185.
-->More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
20013,Admin command cannot enter critical state 'Backup'
Error: Error while calling dbmcli
"D:sapdbprogramspgmdbmcli" -d NSP -u , db_online
============== Start database failed !
Can somone, explain me, please, the origin of this problem and may be a solution to solve it.
Thank you and have a nice day.
Best regards.
Amine

Seem that is a problem in starting DB instance phase, specificly for DBMS instance (you need to check detailed DB starting log in run directory).
For Run Directory, check this link:
http://www.sapdb.org/7.4/htmhelp/ff/2d823b572b844ee10000000a11402f/frameset.htm
For DB Log Files:
http://www.sapdb.org/7.4/htmhelp/9c/2d04073493af41844be62f15d252f3/content.htm
Is a Local SAP System?

Error while starting SAP Content server

Hi Experts,
I have installed content server, and from OAC0 i have imported certificate. The status is showing running. In details tab, when i enter on start button, I am getting below error.
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [SAP AG][SDBODBC DLL][SAP MaxDB] Commun
Can any one suggest possible solution?
Regards
Aditya

Hi Aditya
Could you refer the SAP Notes
1764842 - Connection problem to SAP Content Server
582765 - SAP Content Server cannot address database
Br
SS

SAP R/3 4.6 C on Win 2003 Server, installation error.

Hi all,
I am trying to install SAP R/3 4.6C on a Windows 2003 server Enterprise edition. well at the time of the installation of Oracle 9.0, am I also suppose to create a database, I am using Oracle Universal installer, and it gives me an option to create database or not to.
well, If I do, then it gives me an error at the time of the installation of Database Instance at a stage where the SAP database creation takes place, If I don't then SAP database creation succeeds, all the tablespaces are created successfully, however the post oracle configuration stage gives an error, stating that an SQL statement exec failed... I have tried installing the SAP system more than 20 times, everytime in vain.,
what should I do, Please Help....

Hi,
I'm not aware there is an R/3 preview version available somwhere. Though, wrong forum...

SAP Content Server Configuration (CSADMIN) error in connection

Dear Colleagues
I have installed SAP Content Server 6.40 on Windows 2008 R2 server (64 bit) using IIS 7.5 with MaxDB 7.8.02, Installation completed successfully.
URL testing Information on both Content Server and an Instance which we need to connect to it.
http://cs460:1090/ContentServer/ContentServer.dll?serverInfo
serverType="SAP HTTP Content Server";serverVendorId="Copyright SAP AG, All rights reserved 1998, 2001 ";serverVersion="6400";serverPatch="9";serverBuild="201";pVersion="0046";serverStatus=
"running";serverStatusDescription="";serverDate="2014-05-11";serverTime="02:03:08";startUpDate="2014-05-11";startUpTime="02:03:08";lastAccessDate="2014-05-11";lastAccessTime="02:03:08";
However, when I try to create repository with CSADMIN tcode, I am getting error ''HTTP error: 500 (Internal Server Error)'.
database host is up or down and the web server up
My settings are as follows
1- On Content server I give full permission to content Rep directory
2- On IIS I have allowed Unspecified ISAPI& CGI & modules.
3-odbcreg as the following:-
C:\sapdb\SDB\db\pgm>odbcreg -g
List of installed drivers
1.      SQL Server;     %WINDIR%\system32\SQLSRV32.dll
2.      SAP MaxDB SDB (Unicode);        C:\sapdb\SDB\db\pgm\sdbodbcw.dll
3.      SAP MaxDB SDB; C:\sapdb\SDB\db\pgm\sdbodbc.dll
      C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbcw.dll
ODBC Driver for 'MaxDB' has been successfully registered.
     C:\sapdb\SDB\db\pgm>odbcreg MaxDB -i -p c:\sapdb\SDB\db\pgm -d sdbodbc.dll
ODBC Driver for 'MaxDB' has been successfully registered.
4- under settings tab for the repository I set the parameter (driver = MaxDB) as per SAP note 977091
Please suggest, how to resolve this issue.
Thanks

HI Hany Zahran,
Hope that your issue resolved? if so please close this thread with updated answer and make sure mark assumed answered (see top of the screen).
All the best my dear fnd.
Regards,
chandu.

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

SAP Lumira 1.18 - Error while publishing story to Lumira Server

Hi,
I installed Lumira Server and did the configuration in SAP Fiori as mentioned in the blog below.
Simplified SAP Lumira Server Feature Configuration
I created following users with mentioned roles.
LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
I logged into SAP Fiori with LSADMIN and successfully added Lumira Configuration Tile to New Group "SAP Lumira Server" and Configured all the roles for Technical user (LUMIRATECH) that has sap.bi.common::BI_TECH_USER role assigned. It was successful. Please see the screenshot below.
After this when I tried to publish a story (created using excel data) from SAP Lumira Desktop application to SAP Lumira Server with LUMIRADEV user, I am getting below error.
Do I need to give any additional privileges to LUMIRADEV/LUMIRADEMO ids to be able to create/view stories?
Please suggest.
Thanks,
Abhijit

Hi Henry,
We have SAP HANA SPS 08 Database Revision 82.
I suspect this is an issue with some HANA Authorizations. So as a random trial, I assigned MODELLING role to LUMIRADEV user and also granted SELECT rights on LUMIRADEV schema to _SYS_REPO with grant option. Post that I noticed, I could publish Stories created on HANA in Online mode to Lumira Server with out any issue but still having same issue for other data sources e.g. HANA Offline, Excel etc.
Please let me know if there are any additional rights required for LUMIRADEV user.
Thanks,
Abhijit

SAP Lumira Server 1.18 - Error While creating visualization

Hi,
I installed Lumira Server 1.18 and configured as mentioned in the blogs below.
Simplified SAP Lumira Server Feature Configuration
I created following users with the roles mentioned -
LSADMIN - sap.bi.admin::BI_CONFIGURATOR and sap.bi.admin::BI_ADMIN
LUMIRADEV - sap.bi.common::BI_DATA_ANALYST
LUMIRADEMO - sap.bi.common::BI_DATA_CONSUMER
I did the configuration in SAP Fiori mentioned in the blog with LSADMIN id. I also had Technical user id LUMIRATECH with sap.bi.common::BI_TECH_USER role which was used for configurations in Fiori. It was successful. Please see the screenshot below.
After that I logged on to SAP Lumira Server Launchpad (http://<SERVER>:80<INSTANCE>/sap/bi/launchpad) with LUMIRADEV user. I acquired the dataset from excel. But when I tried to create visualization post successful acquisition, I am getting below error on dropping any dimension/measure on to chart.
Please help. Do I need to give any additional rights to LUMIRADEV?
Thanks,
Abhijit

Hi Henry,
We have SAP HANA SPS 08 Database Revision 82.
Are there any additional authorizations required for LUMIRADEV user (user which is used for Lumira Server). Please note I am able to publish stories and data sets created on top of HANA Online connection from Lumira Desktop and I am able to access, edit Stories as well as create visualization from published data set on Lumira Server. I suspect this is an issue with authorization.
Appreciate your help.
Thanks,
Abhijit

Error when installing sapccmsr agent on standalone database server

Hi All,
I am setting up standalone ccms agent (sapccmsr) on a database server on a windows platform.
I am following SAP note: 371023 - OS07 ST06 - Monitoring operating system data and also refering to ADM107 documentation. I have created csmconf file from the application server and ran sapccmsr -R in the directory (S:\saploc\prfclog). I have also set DIR_PERF to S:\saploc\prfclog.
I get the following error message when I try to register the agent.
[Thr 3968]
Tue Jul 08 15:27:01 2008
ERROR: Could not create directory
DNZBSGSAP50\saploc\PRFCLOG\sapccmsr.
CCMS agent sapccmsr requires
DNZBSGSAP50\saploc\PRFCLOG to be existing and writable.
Make sure directory exists or specify DIR_PERF in profile and run sapccmsr pf=<complete path of agent profile file>.
Tue Jul 08 15:27:05 2008
...closing this logfile...
Please help.
Many Thanks,
Cheers,
Nisch

Hello. Saploc is not your "S:\saploc" directory is the shared directory are created in sap installation time, check your Shares --> "Computer management" --> Shared folders --> Shares
. Check your Saploc it's like drive:\usr\sap
Regards.

SAP Database Server SLD Error

Similar Messages

Maybe you are looking for