SAP DB connect errors
Hi
We have an SRm 7.0 running on windows 2003 64 bit the database is MS-SQL 2005. We keep getting the connect and disconnect errors.
DB-error 11
BVV
BVY
BV4
etc.
I dont see a place to attach the screen shot here.
Hi,
This error is normally caused by network issues as described by note 392892.
You can run a Long LAN stability test (note 500235).
You can also try:
- update to SP3
- update your database library (DBSL note 19466)
Regards,
Eduardo Rezende
Similar Messages
-
SAP-OSS Connection error LB: Unexpected error in LG Layer.
Hi Gurus,
I am using Solman 3.2 on Oracle/Win 2003 server.
While doing Test connection for SAP-OSS Connection error "<b>LB: Unexpected error in LG Layer</b>" is coming.
<b>Please guide me through configuration steps .</b>
I am using following settings which is appearing by default:
Connection type 3
Load distrib. : Yes
Target system : OSS
Msg. server : /H/147.204.2.5/S/sapdp99/H/oss001
Group : EWA
Regards
GauravHello Gaurav,
- in transaction SM59, delete the RFC destinations SAPOSS - in transaction OSS1 -> parameter -> technical settings, save the
actual configuration. After that, in SM59, test again the connection
Did you get this connection SAPOSS working before or this is the first try?
Check note 35010.
Hope this helps,
Dolores -
Hi,
Am facing a problem while connecting SAP-OSS from SM59. I can able to ping 194.39.131.34 successfully from my saprouter system,router command also working fine as below.
D:saprouter>saprouter -r -S 3299 -K "p:CN=<hostname of saprouter> , OU=0000849108,OU=SAProuter, O=SAP, C=DE"
trcfile dev_rout
no logging active
Iam able to login my devleopment and solution manager systems from out side network also successfully.
But iam unable to connect the SAP-OSS (SM59) from development and solution manager.before that its working fine from last days iam getting the problem of SAP-OSS connection.
Here Iam sending the OSS Connection error on SM59 and dev_rout file after iam checking SAP-OSS through SM59.
SM59 Error :
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: SncSessionInitiatorAK
Error Details LOCATION: SAProuter 39.3 (SP4) on 'AEOM1SAP05'
Error Details DETAIL: NiSncIInitHdlSecurity: sncrc=-4;000000000275AE40
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 8
Error Details MODULE: nisnc.c
Error Details LINE: 1121
Error Details RETURN CODE: -104
Error Details SUBRC: 0
Error Details RELEASE: 710
Dev_Rout File :
ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1439]
GSS-API(maj): No credentials were supplied
GSS-API(min): No credentials found for this name (not logged on) (USER=sncadm)
Could't acquire INITIATING credentials for
name="p:CN=AEOM1SAP05, OU=0000757839, OU=SAProu"
<<- SncSessionInitiatorAK()==SNCERR_GSSAPI
'target_acl_key' (addr=000000000202C374, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
ERROR => NiSncIInitHdlSecurity: SncSessionInitiatorAK failed (sncrc=-4;00000000027DFB50) [nisnc.c 1124]
ERROR => NiSncHandleForAddr C9/-1, 194.39.131.34 (rc=-17) [nirout.cpp 3272]
ERROR => NiRClientHandle: NiRExRouteCon for C9/-1 'AEOM1SAP05.aeom.local' failed (rc=-17) [nirout.cpp 2650]
Guide me the same.
Thanku
ThankuHi hashit,
1 st Restart the Solman Server and go to command prompt. Then select the SAPROUTER drive ( D: > cd saprouter )
Currently, your SNC Saprouter process is not up and running, please stopyour saprouter process with command ' saprouter -s ' and restart it using the following with correct User.
D:saprouter> saprouter -r -V2 -K "p:CN=<hostname>, OU=<Number>, OU=SAProuter, O=SAP, C=DE"
Please note that to ensure you Saprouter process is running, you must not close the command prompt screen after you started the above. Once you closed the screen, your saprouter process is stopped and your connection to SAP is dropped.
Please try it and Let me know
Regards
Thomas.T -
SAP OSS Connection Error # 111
Hi All,
We are facing an error while connecting to the OSS. The technical settings in OSS1 transaction are specified correctly.
Below is the error we are facing
Error when opening an RFC connection
ERROR: partner 'xx.xxx.xx.159:sapdp99' not reached
LOCATION: SAP-Server sapsop01_SOL_01 on host sapsop01 (wp 0)
DETAIL: NiPConnect2
CALL: connect
COMPONENT: NI (network interface)
COUNTER: 174
ERROR NUMBER: 111
ERROR TEXT: Connection refused
MODULE: nixxi.cpp
LINE: 2845
RETURN CODE: -10
SUBRC: 0
RELEASE: 701
TIME: Wed Jan 18 20:20:17 2012
VERSION: 38
We are not able to connect to the SAP Router. We have our servers in different location with a firewall in between.
Please let me know how to resolve this issue and also provide me the list of ports to be opened to connect to the SR.Dear Ramkiran
SAP router will use port no 3299 tcp port connet to SAP. Firewalls block this port if not set to allow.
If your firewall is having ip masquarading set local SAP router to represent to SAP check weather the setting are correct?
to verify connect bypassing Saprouter.
reg
priyanshann -
Hi Experts
I am using the following code for SAP-VB Connect, but returns the syntax error in the below line, whats the error actually, and how to correct this, pls help me on this.
If sapConnection.logon(0, False) True Then
The code collected from the one of the forum.
Regards
Rajaram
Private Sub Command1_Click()
Dim functionCtrl As Object 'Function Control (Collective object)
Dim sapConnection As Object 'Connection object
Dim theFunc As Object 'Function object
'Create a function object
Set functionCtrl = CreateObject("SAP.Functions")
'Connect to R/3
Set sapConnection = functionCtrl.Connection
sapConnection.Client = "391"
sapConnection.user = "sap01" 'You user id
sapConnection.Language = "EN"
sapConnection.password = "victory' You password"
If sapConnection.logon(0, False) True Then
MsgBox "No connection to R/3!"
Exit Sub 'End program
End If
Sheet1.Cells.Clear
Sheet1.Cells.Font.Name = "Times New Roman"
Sheet1.Cells.Font.Size = 11
'*********************** BAPI_WAGETYPE_EMPLOYEEGETLIST *********************
Dim returnFunc As Boolean
Dim returnParam As Object
Dim pernr As Long
Dim row, col As Integer
Dim retTab As Object
pernr = InputBox("Enter Employee Personnel Number")
Set theFunc = functionCtrl.Add("BAPI_WAGETYPE_EMPLOYEEGETLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
theFunc.exports("LANGUAGE") = "EN"
returnFunc = theFunc.call
'Cells(2, 1) = "Function Return Value"
'Cells(2, 2) = returnFunc
Set returnParam = theFunc.imports("RETURN")
Cells(1, 1) = "Personnel Number"
Cells(1, 2) = pernr
Cells(1, 2).Font.Bold = True
'Cells(3, 1) = "Message Ret Type"
'Cells(3, 2) = returnParam("TYPE")
Range(Cells(1, 1), Cells(3, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 2), Cells(3, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 2).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 3).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 4).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 5).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 1), Cells(3, 1)).Font.Bold = True
Set retTab = theFunc.tables("WAGETYPES")
rw = 5
cl = 2
Cells(4, 1) = "WAGE LIST"
Cells(4, 1).Font.Bold = True
Cells(4, 2) = "Wage Type"
Cells(4, 3) = "Wage Text"
Cells(4, 4) = "Start Date"
Cells(4, 5) = "End Date"
For Each retTab In retTab.Rows
cl = 2
Cells(rw, cl) = retTab("WAGETYPE")
Cells(rw, cl + 1) = retTab("WAGELTEXT")
Cells(rw, cl + 2) = retTab("VALBEGIN")
Cells(rw, cl + 3) = retTab("VALBEGIN")
rw = rw + 1
Next
Range(Cells(5, 2), Cells(rw - 1, cl + 3)).BorderAround , xlThick, xlColorIndexAutomatic
'******************** BAPI_PERSDATA_GETDETAILEDLIST *********************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_PERSDATA_GETDETAILEDLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Dim dettab As Object
Set dettab = theFunc.tables("PERSONALDATA")
Cells(10, 1) = "EMPLOYEE DETAILS"
Cells(10, 2) = "First Name"
Cells(11, 2) = "Last Name"
Cells(12, 2) = "Gender"
Cells(13, 2) = "Date of Birth"
Cells(14, 2) = "Country of Birth"
Cells(15, 2) = "Marital Status"
Cells(16, 2) = "Nationality"
Cells(17, 2) = "SSN No."
Cells(10, 1).Font.Bold = True
Cells(10, 1).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 2), Cells(17, 2)).Font.Bold = True
Range(Cells(10, 2), Cells(17, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 3), Cells(17, 3)).BorderAround , xlThick, xlColorIndexAutomatic
For Each dettab In dettab.Rows
Cells(10, 3) = dettab("FIRSTNAME")
Cells(11, 3) = dettab("LASTNAME")
If dettab("GENDER") = 1 Then
Cells(12, 3) = "Male"
ElseIf dettab("GENDER") = 2 Then
Cells(12, 3) = "Female"
Else
Cells(12, 3) = "Others"
End If
Cells(13, 3) = dettab("DATEOFBIRTH")
Cells(14, 3) = dettab("COUNTRYOFBIRTH")
Cells(15, 3) = dettab("MARITALSTATUS")
Cells(16, 3) = dettab("NATIONALITY")
Cells(17, 3) = dettab("IDNUMBER")
Next
'****************** BAPI_GET_PAYROLL_RESULT_LIST ***************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_GET_PAYROLL_RESULT_LIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Cells(19, 1) = "Directory of payroll results"
Cells(19, 1).Font.Bold = True
Cells(19, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(20, 1) = "SEQNR "
Cells(20, 2) = "FPPERIOD"
Cells(20, 3) = "FPBEGIN"
Cells(20, 4) = "FPEND"
Cells(20, 5) = "BONUSDATE"
Cells(20, 6) = "PAYDATE"
Cells(20, 7) = "PAYTYPE_TEXT"
Range(Cells(20, 1), Cells(20, 7)).Font.Bold = True
Range(Cells(20, 1), Cells(20, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Set retTab = theFunc.tables("RESULTS")
rw = 21
For Each retTab In retTab.Rows
cl = 1
Cells(rw, cl) = retTab("SEQUENCENUMBER")
Cells(rw, cl + 1) = retTab("FPPERIOD")
Cells(rw, cl + 2) = retTab("FPBEGIN")
Cells(rw, cl + 3) = retTab("FPEND")
Cells(rw, cl + 4) = retTab("BONUSDATE")
Cells(rw, cl + 5) = retTab("PAYDATE")
Cells(rw, cl + 6) = retTab("PAYTYPE_TEXT")
rw = rw + 1
Next
Range(Cells(20, 1), Cells(rw - 1, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 3)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 4)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 5)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 6)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).HorizontalAlignment = 3
'***************** LOGOFF ****************************************
functionCtrl.Connection.logoff
Set sapConnection = Nothing
Set functionCtrl = Nothing
End SubIt will be helpfull, if you can send any screen shot of error page.
Thanks ,
Chetan -
Hi All,
We are using Plant Connectivity 2.0.1.7 with SAP MII 12.1.4.
we have configured two agents which are running automatically but agents got stopped whenever there is upgrade in MII and again we need to reconfigure agents.
Please resolve this issue.
Regards,
Manoj BilthareHi, just to follow up on what Manoj has mentioned. MII was always on 12.1, but patches were updated. When this happened, we got errors that the PCo couldn't connect to the Destination (MII). What happened, was the PCo Agent would start and work for a period, but then when it tried to re-connect (I think after the initial session timed out), it wasn't able to, saying invalid version of MII. If we stopped and started the PCo, it would run for a time and then fall over again.
We reconfigured the MII Destination (still just selected 12.1) and then deleted the PCo agents and re-configured them. Now we're getting the error that there's an invalid date format - not too sure where it could pick that up other than from the OPC Server. All the Agents are doing is monitoring one tag each. If the tag value = 1, then the notification fires and calls the MII transaction.
The OPC Source hasn't changed, all that's changed is we've patched MII.
Has anyone else experienced this same sort of behaviour from the PCo 2.0?
Edited by: Lawrence Prinsloo on Mar 15, 2010 4:44 PM
Edited by: Lawrence Prinsloo on Mar 15, 2010 4:45 PM -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
SAP GUI logon connection error: WSAECONNREFUSED
Dear Experts,
I have installed SAP 4.7, after connecting the console(SAPMMC), when trying to logging to SAP Logon, an error appears which states:
partner not reached( host: XXX.XXX.XXX.XX, service sapdp00)
WSAECONNREFUSED: Connection refused
Can anyone help me to resolve this error.
If this is not the right forum then pls guide me to the concerned to post my question.
Thanks with lots of expectations.
Praveen.I see that you already duplicated your message on the SAP ON UNIX forum. That was the right place to post.
Please close this post here as it it not at the right place. -
Database Connection error in Crystal Reports using SAP BW system
Hi,
While using Crystal Reports in trying to build a report on the SAP Query in SAP/BW System using the MDX driver, I am able to get the structure of the query fields into the report but on the other hand while trying to refresh the report for data I am getting the error message u201C Failed to connect to the databaseu201D . This database connection error occurs despite the fact that the SAP server authentication details being entered on Refreshing the report is correct.
What could be the possible reason? Any guess...
Thanks,
AmoghHi,
Yes, I am using the MDX driver.
Is there any pre-requisites of importing certain ABAP transports into SAP Server since I haven't done any? Please recommend.
Thanks,
Amogh -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
Dear All,
when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 162003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 27 14:29:33 2009
Error Details VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
RFC Connection Error during Web AS ABAP Database Instance
I keep getting RFC Connection error installing the database instance. The following are the pertinent logs:
INFO 2007-05-09 20:10:04
Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
INFO 2007-05-09 20:10:04
Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
INFO 2007-05-09 20:10:22
Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
INFO 2007-05-09 20:12:23
RFC parameter CLIENT set to value 000.
INFO 2007-05-09 20:12:23
RFC parameter USER set to value DDIC.
INFO 2007-05-09 20:12:23
RFC parameter LCHECK set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter PCS set to value 1.
INFO 2007-05-09 20:12:23
RFC parameter LANG set to value EN.
INFO 2007-05-09 20:12:23
RFC parameter ASHOST set to value cix22.
INFO 2007-05-09 20:12:23
RFC parameter SYSNR set to value 00.
INFO 2007-05-09 20:12:23
RFC connection information checked successfully.
ERROR 2007-05-09 20:12:24
FRF-00007 Unable to open RFC connection.
I tried the following fixes spread across different threads in this Expert Forums:
1. Someone said network problem. I rebooted, restarted the install and even redo it.
2. Another suggestion was to use caps on the password. Didnt work.
3. One suggestion was to update the keydb.xml file. However, I could find such property name:
search for the table t_SAPComponent_SAPSystemLogon_SHARED
then look for <fld name="pPW">, <properties>,
<property name ="GUIENG_USER_INPUT" and set the value
"GUINEG_TRUE" to "GUIENG_FALSE".
4. I even used the ddic password 19920706 which is supposed to be the default.
5. Restarted the instance and applied all the fixes above.
Does anyone know what is going on base on the logs above? Thanks.try moving all your install disk onto local file system then rerun the install. That might work....
-
Hi there,
I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next", the application hangs. When activating System output, I get the error shown below.
I already tried to put all jar files contained in the C:\JBuilder5\lib\ext directiry into the classpath (but none of them contains the class mentioned).
Which is the right (standalone) tool for generating Java Proxies for a standalone Java application?
If it is JCB, is there a bug on the version I use (NetWeaver Release 6.20)?
Any help would be apreciated.
C:\JBuilder5>java -Dlog.handler.FileLog=FileHandler,log.txt -Dlog.logger.com=ALL,FileLog -cp lib/ext/aii_basis.jar;lib/e
xt/aii_ifr_core.jar;lib/ext/aii_ifr_jbtool.jar;lib/ext/aii_lcraccess.jar;lib/ext/aii_msg_runtime.jar;lib/ext/aii_proxy_g
en.jar;lib/ext/aii_proxy_rt.jar;lib/ext/aii_util.jar;lib/ext/aii_util_log.jar;lib/ext/lcrclient.jar;lib/ext/logging.jar;
lib/ext/SapIdeHelp.jar;lib/ext/SapIdeJBUtil.jar;lib/ext/SapIdeJspInsight.jar;lib/ext/SapIdeTaglibReflection11.jar;lib/ex
t/SapIdeTracing.jar;lib/ext/SapIdeUtil.jar;lib/ext/SAPJ2EEEngineJBuilderPlugin.jar;lib/ext/sapjco.jar;lib/ext/SAPmdi.jar
;lib/ext/servlet.jar;lib/ext/tc_sec_core.jar com.sap.aii.ifr.tool.jbuilder.JBuilderTool
#0 12:35:37 [main] DEBUG com.sap.aii.util.misc.api.AIIProperties: Initial AIIProperties
com.sap.aii.client = true
#1 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.standalone" from "null" t
o "true"
#2 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.parserFactory" from "
null" to "com.inqmy.lib.jaxp.SAXParserFactoryImpl"
#3 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.transformerFactory" f
rom "null" to "com.inqmy.lib.jaxp.TransformerFactoryImpl"
#4 12:35:46 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.client.SAPNavigationPane: New file is C:\Documents and Setti
ngs\kalkoo1\Desktop\t.jar
#5 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Client : 010
#6 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Logon Name : kalkoo1
#7 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Password : #########
#8 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Language : EN
#9 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Host name: bgstsapedai01.s
t.behr.de
#10 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for System number : 20
#11 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.client.R3LogonScreen: trying to establish connection
#12 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Looking up identity
#13 12:36:08 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.util.IdentityCheck: Results of identity check: isIFRServer: false;
isIFRRMIClient: false; isStandaloneIFR: true
#14 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Checking IdentityCheck.isIFRServer. Result: f
alse
#15 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.sap.SAPConnection: connecting to system 20 on bgstsapedai01.
st.behr.de via JCo
#16 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.sap.SAPUploadSource: init MDI to System bgstsapedai01.st.be
hr.de (system=20, client=010) (BasisRelease: 620)
#17 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.UploadBuffer: new UploadBuffer
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: com/sap/aii/ifr/client/editor/Reference
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
at java.lang.Class.getDeclaredMethod(Unknown Source)
at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
at java.awt.Component.access$100(Unknown Source)
at java.awt.Component$2.run(Unknown Source)
at java.awt.Component$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Component.checkCoalescing(Unknown Source)
at java.awt.Component.<init>(Unknown Source)
at java.awt.Container.<init>(Unknown Source)
at javax.swing.JComponent.<init>(Unknown Source)
at javax.swing.JTree.<init>(Unknown Source)
at javax.swing.JTree.<init>(Unknown Source)
at com.sap.aii.ifr.navigation.IFRJTree.<init>(IFRJTree.java:84)
at com.sap.aii.ifr.navigation.IFRTreePane.buildPane(IFRTreePane.java:123)
at com.sap.aii.ifr.navigation.IFRTreePane.<init>(IFRTreePane.java:33)
at com.sap.aii.ifr.upload.client.SAPNavigationPane.<init>(SAPNavigationPane.java:43)
at com.sap.aii.ifr.upload.client.SAPBrowser.setIsConnected(SAPBrowser.java:252)
at com.sap.aii.ifr.upload.client.SAPBrowser$ConnectAction.actionPerformed(SAPBrowser.java:594)
at com.sap.aii.ifr.upload.client.SAPBrowser$NextAction.actionPerformed(SAPBrowser.java:536)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)Hi,
>> Error :- java.lang.NoClassDefFoundError: com/sap/aii/security/proxy/KeystoreHelp
1) Can you check the class path you have mentioned is correctly
2) Setting of the Java in your system ( Desk top /Lap top ) check the Proxy settings
3) Re start the J2EE engine in the server
Regards
Agasthuri Doss
Maybe you are looking for
-
Error when installing VMM - %1 is not a valid Win32 application
Hi all I'm attemping an install of SCVMM and despite installing all prerequisites I'm faced with the following when I launch the installer/disc and click 'Install': "Error starting the Virtual Machine Manager Setup Wizard. %1 is not a valid Win32 app
-
Quicktime will not allow playback of .mov files (format DVCPRO HD)
hi i'm unable to play .mov files with quicktime application. i am using mac 10.4.11 and have the latest version of quicktime 7.4.5. when i click the files the screen shows only white, and sometimes only audio, no images. i am unsure if upgrading to q
-
Migrating from SQLSvr to Oracle
I'm running SQLDeveloper 3.0.04, Oracle 10.2.0.4 and SQLSvr 2008. I ran the migration, but a number of table's data did not get migrated. I suspect it had to do with timestamp formats. Now I'm trying to move the missing data. Problem #1: I open the t
-
Saving music library while uninstalling i Tunes.
I can't access Gracenote when importing CD's, so I cannot get track info. I cannot instal updates for iTunes - it just don't work - so what if I uninstall iTunes and then reinstall it? Will I lose my library of music? This is the most important quest
-
Which axi version is the supported and compatible version for JDK1.4?
Hi, Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance. Regards, Lokesh Kumar Pattajoshi